Ninja 300 Abs: Specifications
Ninja 300 Abs: Specifications
Ninja 300 Abs: Specifications
BLUE
Please note the image shown above is for illustration purposes only.
Specifications
ENGINE FRAME
Type Liquid-cooled, 4-stroke Parallel Twin Type Tube diamond, steel
35° / 35°
Steering angle (left/right)
Fuel System Fuel injection: ø32 mm x 2,
with dual throttle valves SUSPENSION
Front: Type ø37 mm telescopic fork
Ignition Digital Rear: Type Bottom-Link Uni-Trak with gas-charged
shock and 5-way adjustable preload
Starting Electric
BRAKES
Lubrication Forced lubrication, wet sump
Front: Type Single ø290 mm petal disc
DRIVE TRAIN Caliper Single balanced actuation dual-piston
Transmission 6-speed, return Rear: Type Single ø220 mm petal disc
Final Drive: Chain Caliper Dual-piston
Primary Reduction Ratio 3.087 (71/23)
Gear ratios: DIMENSIONS
1st 2.714 (38/14) Overall length 2,015 mm
2nd 1.789 (34/19) Overall width 715 mm
3rd 1.409 (31/22) Overall height 1,170 mm
4th 1.160 (29/25) Wheelbase 1,405 mm
5th 1.000 (27/27) Ground clearance 140 mm
6th 0.857 (24/28) Seat height 785 mm
Final reduction ratio 3.000 (42/14) Curb mass 175 kg
Clutch Wet multi-disc, manual Fuel capacity 17 litres
Kawasaki Motors (Malaysia) Sdn. Bhd. reserves the right to alter specifications without prior notice.