MOHAMMAD SHOEB ANSARI

Ph. +91-7065124605
Email: shoebansari2006@gmail.com

Seeking assignments in MEP Projects

Professional Synopsis: A detail driven and qualified Graduate Mechanical Engineer with 12
years work experience in Design, Execution, Testing & Commissioning of MEP Projects for high
rise & Low rise buildings as RESIDENTIAL, COMMERCIAL, SCHOOL, UNIVERSITIES, HOTELS,
HOSPITALS & WAREHOUSE.
Familiar with ASHRAE, SMACNA, ARI, ASTM, NFPA, IPC, UPC, & NBC Codes and Standards.

Employment

June ’2019 to Till Date STERLING & WILSON , Noida, India

as a Mechanical Engineer (MEP)

Projects

• Amrita Hospital & Medical College, Faridabad, India.

 Kartarpur Corridor,Punjab, India.
 VCC, Varanasi, Uttar Pradesh, India.
 Shifting of Services & Facility, Parliament, New Delhi, India

Core Competencies
 Designing of mechanical system related to HVAC, Plumbing & Firefighting System.
 Conceptual layout of HVAC, Plumbing & Fire Fighting System.
 Making the RFQ(Request for Quotation) of HVAC, Plumbing & Fire Fighting items.
 Prepare the technical datasheet of items/materials of HVAC, Plumbing & Fire Fighting.
 Prepare the submittal of TDS(Technical Datasheet) & shop drawings of HVAC, Plumbing
& Fire Fighting System for approval from consultants/clients.
 Preparing and reviewing mechanical system calculations including mechanical Load, Basis
of Design, Air balance, Equipment sizing, Pipe sizing.
 Designing ducting layouts with static pressure calculation and selection of grills and
diffusers.
 Calculate the sizing of electric water heater, water tank & water pump
 Preparing the shop drawing of HVAC, Plumbing & Fire Fighting on basis receiving input
from the consultants/clients.
 Selection of machines that are efficient in cost and good in performance like FCU’S,
AHU’S, & Chillers etc.
 Prepare calculation of drainage pipe and water supply pipe sizing in plumbing system.
 Staircase Pressurizing calculations and Lift well pressurizing calculations
 Chilled water pump selection with pump head calculations and pipe designing
 Design of Ventilation System for Car-Park, Kitchen, Toilet, Factory and workshops etc.
 Preparation of bills of quantities, specifications, tender documents and design report.
 Preparation of design report, tender documents and technical specifications.
 Pipe designing with pump head calculations and selection of pumps.
  Capturing relevant mechanical requirements from customers or solution teams and to
come up with a detailed Mechanical drawings.
 Design engineering check, capability, suitability on design drawings, coordination
with draughtsman and giving input in preparing the design drawings
Employment

Jan ’2018 to April’2019 System Airconditioning Pvt. Ltd., New Delhi, India as a
Project Engineer(HVAC)

Execution Projects

• Regency Hospital, Lucknow, Uttar Pradesh, India.

• Bikanerala Restaurant, Rani Bagh, New Delhi, India.

Core Competencies
 Installation of the HVAC system installation at site.
 Execute jobs as per shop drawing and confined specification at site project.
 Conducting and witnessing of inspection of installation and testing of site work.
 Prepared daily, weekly, and monthly progress report as per project requirement.
 Arrange the materials required as per the approved submittal at site.
 Monitor site activities to ensure quality of work is in compliance with approved shop
drawing and Specification.
 Make daily progress report and report to project Manager.
 Preparing relevant documents to issue the work permit for installation activities.
 Attending all site co-ordination meeting with clients.

Employment

Sep ’2012 to Nov’2017 SUHAIMI DESIGN(ARCHITECTURAL, ENGINEERING & PROJECT

MANAGEMENT CONSULTANT), Dammam , Kingdom of Saudi
Arabia as a Mechanical Engineer-MEP

Supervision Projects

 Noura Commercial Tower, Khobar, Kingdom of Saudi Arabia

 Kanoo Warehouse, Dammam, Kingdom of Saudi Arabia
 Bayan Residential Compound, Aziziah, Khobar, Kingdom of Saudi Arabia
 Sipchem Residential Compound, Jubail, Kingdom of Saudi Arabia
 Mada Housing Complex, Dhahran, Kingdom of Saudi Arabia
 Daem Housing Complex, Dammam, Kingdom of Saudi Arabia
 Rezayat Hotel, Khobar, Kingdom of Saudi Arabia
 Dorar Hotel, Dammam, Kingdom of Saudi Arabia

Design Projects

 Lulu Hypermarket, Dammam, Kingdom of Saudi Arabia

 Jufaili Mall, Khobar, Kingdom of Saudi Arabia
 Prince Mohammad University, Aziziah, Kingdom of Saudi Arabia
 Abid Al Zamel Residential Building, Dammam, Kingdom of Saudi Arabia
  Abdul Latif Tower, Khobar, Kingdom of Saudi Arabia
 Dar Alyoum Tower, Khobar, Kingdom of Saudi Arabia
 Iqam Tower, Dammam, Kingdom of Saudi Arabia
 Barakah Tower, Dammam, Kingdom of Saudi Arabia
 Brakah Social Club, Dammam, Kingdom of Saudi Arabia
 Kanoo Logistic Facility, Dammam Kingdom of Saudi Arabia
 Enrichment School, Khobar, Kingdom of Saudi Arabia
 Procare Hospital, Khobar, Kingdom of Saudi Arabia

Core Competencies
 Review and approve the HVAC, Plumbing & Fire Fighting shop drawings as per standard &
specification.
 Designing of HVAC, Plumbing & Fire Fighting System for various areas.
 Coordination with all other Services like architectural, Electrical, Civil & Structural for
Mechanical requirements.
 Supervision of installation of mechanical works related to HVAC, Plumbing & Firefighting
items as per standard norms.
 Review the technical submittals of the materials submitted by contractors.
 Checking and reviewing the Bill of Quantities of mechanical items for projects as per
approved drawing, standard and specification and requirement based at site.
 Attending the weekly technical meeting with client and contractors at site.
 Inspection of the MEP services as per standard and its installation.
 Make Site Surveillance and Non Conformation Report and raise technical issues in meeting.
 Review and approving the invoices and variation order based on the progress at site
submitted by contractor.
 Checking the daily, weekly and monthly progress report submitted by contractor.
 Perform all MEP site activities and coordinate with construction, architecture, structure and
electrical departments during installation of mechanical works.
 Monitoring and controlling project with respect to quality compliance to ensure its
satisfactory execution.
 Ensuring quality, compliance and execution of works according to the owner expectations.
 Witnessing the testing and commissioning of HVAC system, plumbing system and
firefighting system.
 Preparation the snag list or punch list for HVAC , plumbing and firefighting works.

Employment

June’2007 to Jan’2012 LIMRA Consulting Engineers, New Delhi, India as a

Mechanical Engineer-HVAC
Projects

 ESIC Hospital in Alwar Rajasthan, Beltola Assam, Gulbarga Karnataka & Joka West Bengal.
 Physics, Chemistry & Economics Department, Delhi University, Delhi, India.
 BMW showroom in New Delhi, India.
 Ramada Hotel in Agra, UP, India.
 Jawahar Lal Nehru Stadium in Delhi, India.
 Wal Mart in Agra, UP, India.
 Essel Farm House, New Delhi, India.
 Bhagalpur Mall in Bhagalpur, Bihar, India.
 Metropolitan Mall in Jaipur, Rajasthan, India.
 King Abdul Aziz Medical Centre, Jamia Millia Islamia University in New Delhi, India.

Core Competencies
 Perform Heating and Cooling Load Calculations using HAP software to meet building
requirements for various air conditioned areas and ventilation requirements.
 Prepare Technical Schedules for all mechanical equipments like Chillers, FAHU’S, FCU’S,
 Condensing Units, Exhaust Fans, and Pumps etc.
 Selection of HVAC system that is efficient in cost and good in performance.
 Designing ducting layouts with static pressure calculation and selection of grills and
diffusers.
 Pipe designing with pump head calculations and selection of pumps.
 Staircase Pressurizing calculations and lift well pressurizing calculations.
 Preparation of bills of quantities, specifications, tender documents and design report.
Professional Qualification

Bachelor of Engineering(Mechanical) in year 2010 from Jamia Millia Islamia, New Delhi, India.

Computer Skills
 M.S Office
 Auto CAD
 Carrier HAP(Hourly Analysis Program)

Affiliations

 Member of Saudi Council of Engineers.

Personal Profile

Father’s Name : Mr. Nasir Ali

Date of birth : 11 August 1980
Marital status : Married
Nationality : Indian
Languages Known : English, Hindi & Urdu
Driving License Holding : Indian & KSA

Date :
Place : New Delhi

(Mohammad Shoeb Ansari)