Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 279 views

    777D A-Frame Preloading

    Uploaded by

    satya
    This document provides instructions for adjusting the end play of the rear axle housing on a 777D truck. It describes the components involved and outlines an 8 step procedure for measuring end play and installing shims to adjust it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    777D A-Frame Preloading

    Uploaded by

    satya
    279 views3 pages
    This document provides instructions for adjusting the end play of the rear axle housing on a 777D truck. It describes the components involved and outlines an 8 step procedure for measuring end play and installing shims to adjust it.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for adjusting the end play of the rear axle housing on a 777D truck. It describes the components involved and outlines an 8 step procedure for measuring end play and installing shims to adjust it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    279 views3 pages

    777D A-Frame Preloading

    Uploaded by

    satya
    This document provides instructions for adjusting the end play of the rear axle housing on a 777D truck. It describes the components involved and outlines an 8 step procedure for measuring end play and installing shims to adjust it.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    777D Truck 3508B Engine AGC00001-UP (MACHINE)(SEBP3016 - 111) - Docume...

    Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product: TRUCK
    Model: 777D TRUCK AGC01762
    Configuration: 777D Truck 3508B Engine AGC00001-UP (MACHINE)

    Testing and Adjusting


    776D, 777D and 777D HAA Off-Highway Truck Power Train
    Media Number -RENR3320-08 Publication Date -01-06-2013 Date Updated -14-06-2013

    i02815894

    Rear Axle Housing End Play - Adjust


    SMCS - 3260-025-EP

    Illustration 1 g00649772

    (1) Bolts

    (2) Plate

    (3) Cap

    (4) Bolts

    https://127.0.0.1:3344/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 16-06-2018
    777D Truck 3508B Engine AGC00001-UP (MACHINE)(SEBP3016 - 111) - Docume... Page 2 of 3

    Illustration 2 g00649773

    Section A-A

    (5) Pin As

    (6) Thrust washer

    (7) Bearing

    (8) Bolts

    (9) Shims

    Adjustment Procedure For The End Play


    1. Use three bolts (1) that are spaced 120° from each other in order to assemble retainer plate (2)
    to pin (5) . Do not use shims (3) at this time.

    2. Evenly, tighten bolts (1) to 200 ± 25 N·m (148 ± 18 lb ft). Install bolts (4) and washers, but do
    not tighten bolts (4) at this time.

    Note: The chamfer on the inside of thrust washer (6) must face away from bearing (7) . The
    chamfer provides clearance for the radius on the thrust face of pin (5) .

    3. Use a depth micrometer in order to measure the distance from the top of retainer plate (2) to the
    end of pin (5) . Measure this distance through the hole in retainer plate (2) .

    4. Remove bolts (1) and retainer plate (2) . Use an outside micrometer in order to measure the
    thickness of retainer plate (2) .

    5. Subtract the thickness of retainer plate (2) from the distance that was found in Step 3. This is
    the gap between pin (7) and retainer plate (2) .

    6. Add 0.25 mm (0.010 inch) to the distance that was found in Step 5. This is the shim pack
    thickness. Install the correct amount of shims from shim pack (9) .

    https://127.0.0.1:3344/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 16-06-2018
    777D Truck 3508B Engine AGC00001-UP (MACHINE)(SEBP3016 - 111) - Docume... Page 3 of 3

    7. Use six bolts (1) and washers in order to install retainer plate (2) and shims (9) . Torque bolts
    (1) to 750 ± 90 N·m (553 ± 66 lb ft).

    8. Tighten bolts (4) with washers to 1125 ± 100 N·m (830 ± 75 lb ft).

    Note: Apply 4C-5593 Anti-Seize Lubricant to the bore of the cap prior to assembly.

    Copyright 1993 - 2018 Caterpillar Inc. Sat Jun 16 15:32:08 UTC+0530 2018
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1:3344/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 16-06-2018

    You might also like