Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
61 views

Moshell RNC Basic Commands

This document provides commands for checking antenna information, tilts, alarms, counters, cabinets, boards, neighbors, and AAL2 profiles on an RBS site and associated RNC. Key commands include get ant type to check antenna type, get ant mech/elec to check mechanical/electrical tilts, lga to check alarms, pmr to check throughput and users, and get relation and get aal2pathvcctp to check neighbors and profiles on the RNC.

Uploaded by

ngonigomo
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
61 views

Moshell RNC Basic Commands

This document provides commands for checking antenna information, tilts, alarms, counters, cabinets, boards, neighbors, and AAL2 profiles on an RBS site and associated RNC. Key commands include get ant type to check antenna type, get ant mech/elec to check mechanical/electrical tilts, lga to check alarms, pmr to check throughput and users, and get relation and get aal2pathvcctp to check neighbors and profiles on the RNC.

Uploaded by

ngonigomo
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

On the RBS

moshell UXXXX OR moshell XXRNCX Log onto either the site or the RNC
lt all Load all managed objects
get ant type Get antennae type:
Antennae type 7 = 10 degree maximum electrical tilt
Antennae type 5 = 6 degree maximum electrical tilt
Antennae type 3 = 6 degree maximum electrical tilt
get ant mech Get mechanical tilt
get ret elec Get electrical tilt (If not displayed no ret has been
installed)
get proxy Gets the proxy for each sector, used when changing tilts
etc.
lga 3 Alarms for example 3 days
ala Alarm for the current day
pgets Displays all active counters
pmom h counter Description on specific counters and how they
incremented
pmr Displays RSSI, HS Throughput, Users etc
cab Displays the cabinet
cabx Cabinet including boards
lhsh 00XX00 te log read Reading the logs/errors on the boards, XX = Board
Number
St e1 Displays the number of e1 links on the site
get aal2pathvcctp Gets the define aal2 profiles on the site
license key Gets the license installed

On the RNC
get relation=XXXX utranrel Gets the UTRAN neighbors defined for the specified site
get relation=XXXX gsmrel Gets the GSM neighbors defined for the specified site
lst .XXXX Lists MO’s for that site and the associated status
deb cell=XXXXA1|XXXXB1|XXXXC1 Unlocks the specified site/cells
get cell=UXXXX cellreserved Locks the cells on the site
get aal2pathvcctp=bXXXX Gets the AAL2 profiles defined on the RNC for your site
lga |grep XXXX Site alarms from the RNC

You might also like