Command

Description
RNC LOGIN COMMANDS

amos 10.105.219.68

RNC log in IP

lt all

just refresh

strt

to see how many sites are up/down

stc

To Check the status of MUB's for ATM Sites in RNC

st ima

to check the status of IMA Groups in RNC

lst ima

list & Status of IMA Groups in RNC

deb iub_00234

TO UNLOCK IUB

bl iub_00234

TO LOCK IUB

st UHY4488

STATUS OF SECTORS

strt -i iub_00234

STATUS OF PARTICULAR SITE

EXIT FROM RNC

NODE-B LOGIN COMMANDS

amos 10.205.216.201

NODE-B IP to be given

lt all

just refresh

altk

Alarms in RNC/Particular NODE-B

license server

to check whether license installed or not

reload

to give reload to NODE-B when asks for password give rbs

invh

to check whether parameters of license are up or not

lga

alarms log in NODE-B

lgn

to check the which of login to used in site up or down

get . ip

Find All the IP's Which wer given to Node-B

get 0

to see which type of Node-B and site ID and UserLabel this command you have to use when u log in to Node-B only

get tma

to see whether tma is installed in site or not

get . Antennasup

to see the values of AntennaBranch A & B threshold values

lh ru fui get vswr (or) cabx

To Check the VSWR for Sector Antenna Present in Node-B

get radio no

to varify the which no of calls will go out

st

gives the status of all the parameters which are defined in NODE-B.

get radio

TO CHECK CALLS/NUMBER OF RADIO LINKS IN NODE-B FOR SECTORS DEFINED

License Install Commands

open licnese file and save tht in OSS home/cha

amos 10.205.216.199

Login to Node-B

lt all

just refresh

license server

to check whether license installed or not

readclock

to check the time

setclock 2012-07-05 12:00:00

to set the time, time should be GMT time in node(5:30 Back)

ftput /home/ETSARED/cha/Node ID /c/license/licensekeys.xml

path of the license file should be given with respect to where we have save the file in oss

acc licensing updatelicensekeyfile

we are telling to updated license key file

after this press y

user id and password

rbs

IP Adress

NODE-B IP to be given

sFile (string)

/c/license/licensekeys.xml

license server

check whether license installed or not

cvms afterlicense

creating CV

cvset afterlicense

setting the CV and for next reload the node will be loaded with this CV
AntennaBranch B Alarms Clearance Commands

amos 10.205.216.199

Login to Node-B

lt all

just refresh

altk

to check alarms

get . Antennasup

check the threshold values of all sectorsi..e.., 50 , for IBS Site Branch B should be zero

get tma

to check whether tma installed or not, if tma is present at site check internal power value 0 or 1/if its zero make 1

set proxyvalue internalpower 1

setting the internal power value to 1

altk

check for alarms

Password file fault alarm clearance commands

amos 10.205.216.199

Login to Node-B

lt all

just refresh

altk

to check alarms

if alarm exists login to telnet

go to run command telnet 10.105.55.23
user id and password

oss1 user name and password to be given

telnet 10.205.216.198

NODE-B IP to be given

user id and password

rbs

passwd
user id and password

rbs

exit from command promt

altk

check for alarms

cvms

to the create the cv to the node

cvls

to see the cvs

amos site id

login to the perticular of the site

lt all

to the refreshing

get . Rbsid

to the checking the iub in the node

TO THE LOAD THE IUB IN THE NODE

the the open the oss and the coppy the script in the oss after that then go to the winflor
l ls

to the serching for the script in the oss

then coppy the file name in the oss

trun file or the floder name

then be the loaded the script on the node end

get . Rbsid

then be the checking the when iub is loaded in node end or not

amos site id

login to the perticular of the site

to the refreshing command

then be the script running commands in the 3g

lt all
then be the first login the oss

and then be the save the script in the Documents

then be the show the which commands will be in the oss
it is used to show the which of the files in the Documents of the floder
it is used to running license or script in the perticular of the site

l ls

l cd Documents
trun file name

then be the clear the carrier alarms

setclock
setclock 2015-12-21 10:00:00
the change the iub value

amos site
lt all
cvls
cvset after iub loaded
acc 0 manualrestart

enter the site

refreshing command
cv state
cv set command
reloadin commands
2
0

int
poll
cvls
trun iub file
the reloaded the node

check cv go to the place or not

loaded the iub value
reloadin commands

acc security= adaptSecurityLevel

RXMSC:MO=RXOTG-547,SWVER=B1308R069H;
RXPLI:MO=RXOTG-254,UC;

cedr | grep siteid

uer -r iub value
pmr
choice 20

cd Scripts/NodeBTemp; perl NT.pl 2>LogReport

mobatch -o -p 30 List.txt ./cmd.txt ./trail1

egrep 'RRUS12B3 RRU-' *.log>vswr.txt
egrep 'Active*' *.log>Board.txt
egrep 'Startable' *.log>CV.txt
egrep 'Date:' *.log>CV.txt

TO THE EXECUTED THE DUMPING COMM

egrep -i 'RRUS12B3 RRU-' *.log > vswr.txt

egrep -i 'EUtranCellRelation=' *.log > relations.txt
grep -i 'ENodeBFunction=1,EUtranCellFDD=' *.log > FDD_Status_Post.txt
egrep -i ' M | C | m ' *.log > AlarmList_Post.txt
egrep -i 'Critical,' *.log > AlarmCount_Post.txt

st sau
run /home/ESLANAR/vasanth/sau.mos

http://portal.actcorp.in/web/hyd/home/-/act/login?p_auth=6ElYFpTb

TO REFRESHING COMMANDS

acc o manualrestart
y
2
0
int
poll

4G COMMANDS IN NODE END

amos site id
lt all
st fdd
st rru
altk
cabx
set
get
st cell

st sync

TO CHENGE THE USERLABLE TO THE S

amos site id
lt all
get 0
set 0 userlable site id
get 0
q
mixed mode configaration

amos site id
lt all
st gps
deb proxy values of the gps
get . Gpsout
run /home/ESLANAR/vasanth/mixed mode.mos
get . Mixed
st sync
cvms gps enable

deblocking the gps on site

amos site id
lt all
get gps
st gps
deb prox value
y
run/home/ejnoqre/mixedmode.mos
get gps

then the batch running commands

first sine in the oss

and then enter the username and passwd
and then save the site ids on the site.txt
and the enter which commands will be executed in the cmd.txt
and then enter the winfloer
then enter the commands are
l ls
l cd documents
and then running the mobatch of the command
mobatch -o -p 100sites site.txt ./ cmd.txt ./ floder name
and then executed the all of the commands by the using the some of the commands

to be locked the port b

amos siteid
lt all
st fdd
st rru
altk
cabx
st cell
bl prox value
st rfport
bl protb of proxvalue
get . Nooftxantenna
prox
set proxvalue number of tx antenna 1
set proxvalue number ofrxantenna 1
deb proxvalue

License to be loaded

first login the oss

then place script in the oss
then login the winfiol
amos site id
lt all
altk
acl 6
acc 6 UpdateLicekey file
enter the User lable which is to be login
enter the passward for user
then enter the ip address for oss
/home/ejnoqre(or)eslsnar/Documents/SITE ID/XML script in the given
cvms license

MoBatch Command
VSWR
Board
CV
Date

E EXECUTED THE DUMPING COMMANDS

only VSWR
intra neighbours
executed command from the status of the fdd
executed command from the alarms list
exeuted command from the alarmscount

to the check the sau is loaded are not

to the loaded the sau in the site end

TO REFRESHING COMMANDS

to the refreshing
to the conformation
to the restart in the site end
conformation code
to the give the input to the restart
refreshing of the taking time

4G COMMANDS IN NODE END

to the enter the site end

refreshing
to check the site is up or down
to check the site is up or down in the site end
to check the alarms in the site end
to check the vswr in the site end
to be change the value of the any of that
to give the all of the information to the any of the opction
to check cell is in up or down

to the check the sync is evalble or not

CHENGE THE USERLABLE TO THE SITE

to the enter in the site end

to the refreshing command
to check the user lable in that type of the site
then be the change in the user lable by the using the command
then be the change the user lable
to be check the user lable will be change are not
exit for that type of the site id
mixed mode configaration

to the enter the site end

refreshing commands
to be check the status of the gps
when the gps will blocked in the site
then deblocked the gps in the site
to know the all the information from the gps
it is used the to run the mixed mode of the script
to be check the sectors will be true or faluse
to be check the sector will be sync or not
to be create the cv

deblocking the gps on site

to the enter the site end

to the refreshing command
to get the information form the gps
to be check the gps will be true or faluse
then be deblocking the prox value
to the conformation
to get the information form the gps

then the batch running commands

to serching the type of the files in the oss

then enter the documents file in the oss
then running the mobatch to the every of the 100 of the sites and then saved the all of the in the floder name

to be locked the port b

to be login the site end

refreshing command
to know the status of the fdd
to know the site status in the site end
to check the number of the alarms in the site end
to check the vswr in the site end
to know the cell status
to check the prox value of the port b
blocked the prox value in the perticula of the cell
to know the number of port
which sector will be locked the port b then taken the port b prox value
blocked the prox value of the perticular of the sector
to see the number of antennas in the site
to know the prox values of the antenna prox values
then it changed the number of antennas in the prox value in the sector
then it changed the number of receiving antenns in the prox value in the sector
then be the relese the perticular of the cell

License to be loaded

to be login the node

refreshing commands
checking the alarms
to be license status
the see the license level

cv creation

egrep 'port_' *.log>vswr.txt{{for 3g}}

cabx | egrep 'RRUS12B3 RRU-'

pr relation
hget EUtranCellFDD State|barred|primaryPlmnReserved
alt
alt

eaw BSC name

RLCRP:CELL=ALL;
RLCRP:CELL=CELL ID;
RLSLP:CELL=CELL ID;
RXTCP:MOTY=RXOTG,CELL=CELL ID;
RXMFP:MO=RXOCF-TGVALUE;
RXMFP:MO=RXOTRX-TG VALUE-0&&11;
RXMSP:MO=RXOTX-TGVALIE-0&&-11;
RXMSP:MO=RXOTG-TGVALUE-0&&-11;
RXASP:MO=RXOTG-TGVALUE;
to check the status of a site which is down
RXMFP:MO=RXOCF-TGVALUE;
RXAPP:MO=RXOPT-TGVALUE;
RADEP:DEV=RBLT2-DEVICENUMBER;
NTCOP:SNT=RTMNUMBER;
DTSTP:DIP=DIPID;

RRSCP:SCGR=Tgvalue;
ntcop:snt=all;
gdstp;
ioexp;
stdep:dev=device numbers;
tpble:sdip=etmvalue;
dtbli:dip=dipvalue;
dtble:dip=dipvalue;
tdcop:sdip=etm value;
rldep:cell=cell id;
rlsgp:cell=cell id;
rxscp:scgr=chgr,sc=sctype,numdev=numdevnumber;
rldgp:cell=cell id;
rlpgs;
saosp;
gdstp;
laeip:suname=sumuber;
csbp;
expop:rp=all;
cpfls;
aploc;
gst

To show the site in msc or not

in bsc commands

RRSCI:SCGR=277,SC=1,DEV=RBLT2-9537,NUMDEV=31,DCP=287,;

RRSCE:SCGR=277,SC=0;

to the login the perticular of the BSC

Login to the perticular of the BSC and then be show the which of the sites in the bsc
this command is used to the status of the perticular of the site of (BCCH,CBCH,SDCCH,GPRS)
this command is gives the status of that cell(means ,call of that cell.in USE column , it shows SPEECK , GPRS)
This command gives the site status (down or not ), in NCH cloumn all will be zero . Otherwise et will have some values in all the
This command gives the TG values of that cell(with this we can find the number of cabinets also)
This command is used to know the Cfstatus (site status ). Cfmeans controlling function .status is OPER if CF is in operation oth
This command will give the status of each TRX . (Status as OPER OR NOOP., IF NOOP, beside that BLO will appear)
This command will give the site status (CF,LS, CON, TRX,TX , RX, TS,TF).With single command we will come to know all these
Gives all the alrms in that TG(cainet);

Gives the Cfstatus . When the site is down it will show MOOP in the STATE, other wise it will be OPER.
this command will give the RBLT2 with Device numbers
This command is gives the ETM value (device numbers will be like 5061to 5085).at the end in SNTINL it gives one number. Th
Gives ALL THE dips(0TO 62E1s will be there in an ETM )of that ERM. Gives DIP name rom this . Go to the number found in SN
Gives the dip status . It will be WO In the state column if e1 is working fine. Other wise it may be ALS,RDI.

to check the supper cahannel group events

to show the even dip value
to check the supper channel working or not
to known the gsp model and saftware
to know the dip status and dip activeite or not
to relese the etm value
to block the dip
to relese the dip value

position of rp
to see no of saftet ware avalible
to go from cp to apg
get before set

37,NUMDEV=31,DCP=287,;

directlu as below