.

execute commands from file

? print description of commands
EtHostDump List internal data for the Et Host SWB
EtHostMo_getPmCounters Get PM counters for a specified host
EtHostMo_startPing Start a ping session
EtHostMo_startTraceRoute Start a trace route session
EtHostMo_stopPing Stop an active ping or trace route session
EtHostPrintProc List active print processes
EtHostResetPortNoPool Manipulates the Port Number Pool for testing
Ippdh Umbrella function for internal COLI commands
Ippmlh Umbrella function for internal COLI commands
IppsrhInfo The IppsrhInfo command has several subcommands;
MacHsTest Warning: Only for internal development use. Do not abuse. Command has
severe impact on subscriber traffic execution.
NtpDr Print info from NTP sync HW driver
UdpShDump Command syntax:
UdpShPrintProc Command syntax:
aal2ap Prints AAL2 AP program data.
aal2cpsrc Prints AAL2 CPS RC program data
aal2ncc Prints AAL2 NCC program data
aal2nccadm Prints AAL2 NCC ADM program data
aal5apterm Prints static connection data of AAL5 AP TERM
aal5debug Collects and prints out AAL5 CBM data
aal5eph Prints out AAL5 EP Handler data
aal5etterm Print static connection data in AAL5 ET TERM
aatest Diagnostics for AA server(s), -h for more help
aet_aal2bp Status info for the AET AAL2 BP program
aet_aal2mp Status info for the AET AAL2 MP program
aet_atmbp status info for AET ATM BP program
aet_atmmp status info for AET ATM MP program
aet_imabp Provides object status information for the AET IMA BP program
aet_imamp Provides object status information for the AET IMA MP program
aetlss Lists service registrations in the LSS
appapi APP33DR APP3342 RTE/API status and control
apparp APP33DR ARP status and control
appbh APP33DR BH status and control
appcmn APP33DR CMN status and control
appdh APP33DR DH status and control
apphost APP33DR HOST status and control
appht APP33DR HT status and control
appicmp APP33DR ICMP status and control
applh APP33DR LH status and control
appph APP33DR PH status and control
apppol APP33DR POL Policies and counters
appsh APP33DR SH status and control
arm print LLP armament info
arp Display ARP cache entries
arplist Display ARP table entries
atfConnect Connect an AU via ATFI
au3vii LED states for all AU3s connected to the DB
autodds Set error check level and/or default trace
banner
bbRdbtMeas_3 Starts or stops RDBT measurements
bbRdbtMeas_4 Starts or stops RDBT measurements
bbRdbtMeas_5 Starts or stops RDBT measurements
bbRdbtMeas_6 Starts or stops RDBT measurements
bbRdbtTrace_2 Starts or stops RDBT tracing
bbRdbtTrace_3 Starts or stops RDBT tracing
bbRdbtTrace_4 Starts or stops RDBT tracing
bbRdbtTrace_5 Starts or stops RDBT tracing
bbRdbtTrace_6 Starts or stops RDBT tracing
bcm Accessing and setup the ethernet internal switch
bh CommandName:
biosls List installed bios modules
bl list processes
bmlmdata List loaded modules data
bmpgmconfig Management of Board Manager configuration
bmrdump
bs Execute a number of commands and print result
buffel Display buffel configuration and usage
bvlq Get value from BVL. BVL_AREA default name if no area-name
capi
cat copy files to stdout
cd change the working directory
cease cease ...
chcmeasfwtrace Selective Tracing for measurements in ChcMeasFwBlu
chkdsk Request a checkdisk on given volume
chmod change access mode of files
cls clear screen (using ANSI codes)
connfss This command has been disabled
cp copy files. If multiple names are given, the last name must be a directory.
Option -R means recursive.
cpridump Dumps related info on all non-idle CPRI links.
createObj Creates an object.
csti csti - csti Server status
cv Configuration version command
dda Send DDA command
deleteObj Delete an object.
devinfo Display real and virtual device info
disableBPAIrestart_1 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableBPAIrestart_2 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableBPAIrestart_3 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableBPAIrestart_4 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableBPAIrestart_5 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableBPAIrestart_6 Disables the Restart Board Procedure (No dumps,no stopping of DPs and
no board restart)
disableCBCIrestart_1 Disables the Restart Board Procedure (Dump, stop and no board restart)
disableCBCIrestart_2 Disables the Restart Board Procedure (Dump, stop and no board restart)
disableCBCIrestart_3 Disables the Restart Board Procedure (Dump, stop and no board restart)
disableCBCIrestart_4 Disables the Restart Board Procedure (Dump, stop and no board restart)
disableCBCIrestart_5 Disables the Restart Board Procedure (Dump, stop and no board restart)
disableCBCIrestart_6 Disables the Restart Board Procedure (Dump, stop and no board restart)
domlist list all regions in one/all domain(s), optionally showing used physical
memory fragments.
dpSetMemDumpAreas Set user memory area to be dumped for <snid>
dpcmd_1 Executes a list of commands
dpcmd_2 Executes a list of commands
dpcmd_3 Executes a list of commands
dpcmd_4 Executes a list of commands
dpcmd_5 Executes a list of commands
dpcmd_6 Executes a list of commands
dspMemChange Write DSP Memory
dspMemDump Read DSP Memory
dsp_nmi trigger NMI for DSP with given snid number
dspload Load is presented as: mean [min, max], ...
dspmem Memory is presented as: Pool1, Pool2, ...
dspstat This command prints statistics counters and states from the DSP.
duilFaultInject Injects a fault to SRIO-I BC
duilOpenTestPort Activate SRIO test ports
dump Print a post mortem dump.See dump -h for more options.
dumpcap dumps OAM IP-communication in pcap format on file
dumpecncr Dumping EcNcrNodeConfigurationRepository(NCR) component residing at MPSW-
EQC level
dumpelg dumpelg will print the error and repair logs to screen
dumph dump heap info or list all heaps
echo echo arguments (-n no newline)
ecodes List the entries in the error code log.
efcdump filter = anp|gdl|gul|oil|rfc|sub|txm|all
efhreset resetLeakyBucket component residing at MPSW-EQC level
erasehwlog erasehwlog will erase all hw error logs in flash
ero Ero commands
errno print description of errno number
errorlist Print all registrered error codes.
ethernet ethernet shell command
ethmode Ethernet speed/duplex control cmd's
ethtraceroute Determine the IP network route to a specified destination
exit exit the current shell
fault fault ...
file Display and manage objects in 2nd filesystem.
flcdr FLCDR status and control
format format local flash volume
formathd Format the Hard Disk
fssls list fss objects
ftl Flash Translation Layer commands
getAttrObj Get attributes for an object.
getDiskDataObj Get attributes for disk for an object.
getProcessorLoad Get processor load for a PIU.
get_itdhpmcnt Get PM counters for the internal distribution handler
get_ithostpmcnt Get PM counters for the internal host
getpri This command has been disabled
gkDrvCmd <gkDrvCmd ?> for description
hdinfo Hard disk parameter information
hdpartition checks or harmonizes the disk partitions as per table
hdreadtest Hard disk read test of HD
hdstat Hard disk statistics printout
heapinfo Heap information (for proc/seg)
help print description of commands
hili Hardware Inventory Log Handling commands
hostname show or set hostname
hwpid Read hardware pid from specified target
ifconfig Print IP address
ipac_blockHostRegi Command for blocking of IPHOSTREGI
ipac_blockSyncRegi Command for blocking of IPSYNCREGI
ipac_ipadm Status info for the IPAC IP Adm administrator program
ipac_ipsyncref Status info for the IPAC IP Sync Ref administrator program
ipac_ping Send echo request from IPAC host.
ipac_traceroute Send traceroute request from IPAC host. please
note that the time display in the output is based on router configuration
ipcp_bh Status info for the IPCP board handler administrator program
ipcp_dh Status info for the distribution handler administrator program
ipcp_lh Status info the IPCP link handler administrator program
iptransmode information about ip transport settings
jdumpthreads Dump the stack trace of Java threads
jheapinfo Java heap information
keys configure/display terminal key settings
lhconfig Config of link handlers
lhsh Execute command on remote processor
license License server command (license <cmd>)
linkstat HDLC state and statistics for MP-ATF.
linkstat1 Statistics for BP-AU communication.
linkstat3 Primary Station UAC state and statistics.
linxeth list Linx Ethernet connections
listObj List an object.
list_filterobj Print filter data
list_str Print str buffer data
list_traceobj Print trace data
listenv list environment variables for <processes> and their corresponding block.
listloaded List Loaded Modules
lkmcfg View/create/delete Linx Ethernet links
llog Read error log
ln make a link from one file to another
log Log server command
logAll Runs logDbcc,logDbch,logHsDbch,logEDbch and logESc
logDbcc Logs Dbcc resources
logDbch Logs Dbch resources
logEDbch Logs E-Dbch resources
logESc Logs E-Sc resources
logHsDbch Logs Hs-Dbch resources
logMacHs Logs all setup DBCC devices with its dbccId:s. If a cell is HS capable,
macHs SNID will be a figure between 1 and 6
logUbch Logs Ubch resources
logattributes List the attributes for a log
logclock Start or stop logging of the system clock.
logdelete Delete a log
login login command is not supported
loglevel Set loglevel for OSENET.
loglist Lists all available logs
ls list files
maciDumpSession Dump session related information
man man command
mch MCH info
md5 prints MD5 checksum for a file
mdio read registers from devices connected to mdio bus
migrate Migrate a program to a core
mirror Prints the status of the mirror driver
mkdir create directories
mm Display MM run-time state information
mount mount a volume
mpcmd Type mpcmd help for detailed help.
msi_list Print region data for MSI
mv rename/move files
namelookup List registered services and pending lookups
ncli MO cmd: ncli, start NCLI session to access CS.
nehgammadata Dumping EcNeh gamma data
nehidcptable Dumping EcNeh IDCP Table
netstat Display net statistics
node_id node identity commands
nodeping Start an internal ping session
nsinfo Nameserver information commands
nssfreerunning Force regulator to enter freerunning state. No synchronization reference
should be selected when this command is used.
nssinfo Get NSS status information
nssmpinfo Get NSS MP status information
nsssetfsyncreg Send the FSYNC puls from FPGA every 40 ms instead of 4096 ms.
nsstableinfo Get NSS MP table information
ntp NTP handling commands.
ntpconfig Set ntp server ip address | get ntp info
ospi_CXC1321315 Prints ospi status
partition Create, delete and list disk partitions.
passwd Changing password for all users
pboot Display and manage object in the primary filesystem
pcapexplorer Lists dumpcap traces. Traces can be deleted with the -d option
pgmUpgradeObj Soft program upgrade
pgrun load and run a program
phySetRo_status Gets current status of SET RO object for one piuId
phy_eqmtbp Lists equipment and driver data
phy_eqmtmp Lists all objects on MP
phyhp_status Gets current status of specified HP object
phyhp_status_all Gets current status of all specified HP objects
phylp_state Gets current status of all specified lp objects
phylp_status Gets current status of specified lp object
phylpdh_state Gets current status of all specified lpdh objects
phylpdh_status Gets current status of specified lpdh object
phyos155_status Gets current status of specified os155 object
phyos155_status_all Gets current status of all os155 objects
ping The command verifies the IP connectivity to a host.
pm_create Create a program.
pm_ff Print all file formats supported.
pm_install Install a load module
pm_kill Kill program
pm_lmconf Print configuration for a load module image.
pm_lminfo Print information for a/all load module image(s).
pm_pgconf Print configuration for a program.
pm_pginfo Print information for a/all program(s).
pm_pt Print all program types supported.
pm_start Start a program.
pm_uninstall Uninstall a load module image
poolinfo List information about pools
ppcpm Processor performance monitoring
preload Loads the flash with the specified programs
printf ,redirect printf or end redirections
ps list processes
pwd print the working directory
qfDrvCmd <qfDrvCmd ?> for description
qs List signals in a process signal queue
raxlFaultInject_3 Injects a fault
raxlFaultInject_4 Injects a fault
raxlFaultInject_5 Injects a fault
raxlFaultInject_6 Injects a fault
rcmd remote command execution
rcp Copy files or directory to remote local volumes
rdfpga Reads registers from the FPGA.
rdsfp Reads info related to given SFP.
readclock Read system clock [unix date format]
readdspeventlog Read event log from DSP
reload Restart the board (default warm)
restartNtp Restarts NTP Kernel
restartObj restarts an object.
rlc Clear the ramlog
rld Display ramlog
rlw Write a string to the ramlog
rm remove files
rmdir remove (empty) directories
rollback Rollback a transaction
rpmm ram pmm commands
rrh rrh help
rrt Type 'rrt help' to display RoseRT debugger commands
rrt-CXC1730177%1_R80B Type 'rrt-CXC1730177%1_R80B help' to display RoseRT debugger commands
rrt-CXC1730179%1_R80D Type 'rrt-CXC1730179%1_R80D help' to display RoseRT debugger commands
rrt-CXC1730180%1_R80B Type 'rrt-CXC1730180%1_R80B help' to display RoseRT debugger commands
rsock Configure/query rsock deamon.
run Runs all intercepted processes
sccrcinfo sector = 1..6 carrier = 1..4 object = a string
sctp_config prints some SCTP-ROF configuration data
sctpadm_config cmd sctpadm_config lists some configuration data in SCTP ADM.
sctpadm_info cmd sctpadm_info lists all process info in SCTP ADM
sctpadmrofcmd cmd sctpadmrofcmd send trace settings to user plane.
sctphost prints some SCTP-ROF configuration data, statistical information and lists
association or endpoint info in SCTP HOST
sctphost_info cmd sctphost_info lists association or endpoint info in SCTP HOST
sctphost_stat cmd sctphost_stat prints some statistical information
sctphosttrace Configure log filtering.
secmode
setAssuredMode kindOfResource = 0..2 established = 0..1
setAttrObj sets an attribute value for an object.
setGracePeriod kindOfResource = 0..2 decreaseTimer = 1..1000
setclock Set Clock
setenv set/list environment variable [for block] [for process]
sethighsp Set terminal speed to 115200 baud
setlowsp Set terminal speed to 9600 baud
setpri This command has been disabled
shell invoke shell
sigs List information about signals
sleep This command has been disabled
sma Prints SMA status and container data
spdel Delete a system parameter.
spdprint Printout of the Security Policy Database (SPD)
spedit Edit system parameters interactively
splitethcdbg Returns debug information fetched from split eth client.
splitethsdbg Returns debug information fetched from ose_split_server.
splitethstat Shows/clears statistics of split ethernet server/client.
spmod Stepwise view and modify system parameters.
spr Read a system parameter.
spray
spw Write a system parameter.
srioconf Read/write srio device registers
ss Show maximum process stack usage
stat report information about file/directory
statheapchc static heap manager
supervision enables/disables supervision of DSP's
swcon Set or print srio switch congestion stats
swdump Print srio switch registers
switchObj Switch an object.
swperf Enable/Disable or print srio switch performance stats
swport Enable/Disable port on srio switch
sync synchronize volume with disk
syspar Get or set system parameters
te Trace & Error Handling commands
term display info about terminal
tetxt Adds INFO trace to CPP T&E log.
tm target monitor command
touch Create an empty file.
tracefilter enables/disables DSP T&E filter function
traceroute The command finds the routing path to a certain host.
tsec tsec shell command, use ethernet instead
txlFaultInject_2 Injects a fault
uart750 UART750 device driver statistics and settings
uetrace Selective UE Tracing
umask display/set the current file system mask
unmount unmount a volume
unsetenv remove environment variables [from block] [from process]
uptime display system uptime
usaaladm information about usaaladm
usaalserver information about usaalserver
uselmc_1 Selects an LMC
uselmc_2 Selects an LMC
uselmc_3 Selects an LMC
uselmc_4 Selects an LMC
uselmc_5 Selects an LMC
uselmc_6 Selects an LMC
vii VII info
vlandev Create or remove VLAN device
vols report volume statistics
who list who is logged on
winAal2Cmd Use winAal2Cmd ? for description.
winAtcCmd Use winAtcCmd ? for description.
winAtmCmd Use winAtmCmd ? for description.
winCmd Use winCmd ? for description.
winImaCmd Use winImaCmd ? for description.
wrfpga Writes to a register in the FPGA.
zzosvarp Show the address of the OSE kernel data handle.