TLN Series – Undertab

TLN Series
Tantalum Solid Electrolytic Chip Capacitors - Undertab Series

FEATURES
• Undertab Terminations Layout:
- High Volumetric Efficiency
- High PCB Assembly Density
- High Capacitance in Smaller Dimensions LEAD-FREE COMPATIBLE
COMPONENT
• 3x Reflow 260°C Compatible
• 100% Surge Current Tested
• Consumer Applications (e.g. PCMCIA/USB
Wireless Express Cards, Mobiles, MP3 etc.)
• 6 Case Sizes Available
• CV Range: 47-220μF / 4-10V

APPLICATIONS
• Mobile Phones
• Tablets
• MP3/4 Players

CASE DIMENSIONS: millimeters (inches)

EIA EIA L±0.20 W+0.20 (0.008) WP±0.10 WN±0.10 AP±0.10 AN±0.10
Code H max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004)

M 0805 2012-09 2.05 (0.081) 1.30 (0.051) 0.90 (0.035) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016)
N 0805 2012-10 2.05 (0.081) 1.30 (0.051) 1.00 (0.039) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016)
K 1206 3216-10 3.20 (0.126) 1.60 (0.063) 1.00 (0.039) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035)
S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035)
L 1210 3528-10 3.50 (0.138) 2.80 (0.110) 1.00 (0.039) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039)
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039)

MARKING
K, L, S, T, CASE M, N CASE Polarity Band (Anode+)
Capacitance Value in pF
Capacitance Value in pF W L W
106 = 10µF
107 = 100µF Rated Voltage
J = 6.3V

Polarity
10 7 J AVX LOGO 106 H
Band
(Anode+)
XXXXX ID Code Polarity
J AVX LOGO

Band
WP AP S AN WN
(Anode+) Rated Voltage Code
J = 6.3V

HOW TO ORDER
TLN S 227 M 004 R 3000

Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ
See table pF code: 1st two digits M = ±20% 004 = 4Vdc R = Pure Tin 7" Reel
above represent significant 006 = 6.3Vdc S = Pure Tin 13" Reel
figures, 3rd digit represents 010 = 10Vdc
multiplier (number of zeros
to follow)

TECHNICAL SPECIFICATIONS
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 47 μF to 220 μF
Capacitance Tolerance: ±20%
Rated Voltage (VR) -55°C ≤ +40°C: 4 6.3 10
Category Voltage (VC) at 85°C: 2 3.2 5
Category Voltage (VC) at 125°C: 0.8 1.3 2
Temperature Range: -55°C to +125°C with category voltage
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR with 0.1Ω/V series impedance with
60% confidence level

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
46 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021821
TLN Series
Tantalum Solid Electrolytic Chip Capacitors - Undertab Series

CAPACITANCE AND RATED VOLTAGE RANGE

(LETTER DENOTES CASE SIZE)
Capacitance Rated Voltage DC to 40°C / 0.5DC to 85°C/ 0.2DC to 125°C
μF Code 4V (G) 6.3V (J) 10V (A)
33 336
47 476 K(1500)/M(6000)/N(6000)
68 686 K(5400) K(5400)/S(6000)
100 107 N(5200) K(2000,5400)/S(5400) K(2500)/S(2500)
150 157 K(2500)/S(2500) K(2500)/S(2500) H(6000)/L(1300)/T(1500)
220 227 K(2500)/L(1300) S(3000)/T(1500) L(1000)/T(1500) T(1300)

Released ratings, (ESR ratings in mOhms in parentheses)

Engineering samples - please contact AVX
Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.

RATINGS & PART NUMBER REFERENCE

100kHz RMS Current (mA)
Category Category Maximum ESR
Rated Rated DCL
AVX Case Capacitance Voltage Surge Max.
Temperature Voltage Temperature Current Max. MSL
Part No. Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) 25ºC 85ºC 125ºC
(A) (mΩ)
4 Volt @ 40°C
TLNN107M004#5200 N 100 4 40 0.8 125 0.4 20 5200 88 79 35 3
TLNK157M004#2500 K 150 4 40 0.8 125 0.7 12 2500 148 133 59 3
TLNS157M004#2500 S 150 4 40 0.8 125 0.7 12 2500 148 133 59 3
TLNK227M004#2500 K 220 4 40 0.8 125 0.7 44 2500 148 133 59 3
TLNL227M004#1300 L 220 4 40 0.8 125 1.1 17.6 1300 215 193 86 3
TLNS227M004#3000 S 220 4 40 0.8 125 0.6 17.6 3000 135 122 54 3
TLNT227M004#1500 T 220 4 40 0.8 125 1.0 17.6 1500 216 194 86 3
6.3 Volt @ 40°C
TLNK686M006#5400 K 68 6.3 40 1.3 125 0.5 4.1 5400 101 91 40 3
TLNK107M006#2000 K 100 6.3 40 1.3 125 1.3 12 2000 166 149 66 3
TLNK107M006#5400 K 100 6.3 40 1.3 125 0.5 6 5400 101 91 40 3
TLNS107M006#5400 S 100 6.3 40 1.3 125 0.5 6 5400 101 91 40 3
TLNK157M006#2500 K 150 6.3 40 1.3 125 1.1 18 2500 148 133 59 3
TLNS157M006#2500 S 150 6.3 40 1.3 125 1.1 18 2500 148 133 59 3
TLNL227M006#1000 L 220 6.3 40 1.3 125 2.2 26.4 1000 245 220 98 3
TLNT227M006#1500 T 220 6.3 40 1.3 125 1.6 26.4 1500 216 194 86 3
10 Volt @ 40°C
TLNK476M010#1500 K 47 10 40 2 125 2.6 4.7 1500 191 172 77 3
TLNM476M010#6000 M 47 10 40 2 125 0.8 9.4 6000 82 73 33 3
TLNN476M010#6000 N 47 10 40 2 125 0.8 9.4 6000 82 73 33 3
TLNK686M010#5400 K 68 10 40 2 125 0.9 6.8 5400 101 91 40 3
TLNS686M010#6000 S 68 10 40 2 125 0.8 6.8 6000 96 86 38 3
TLNK107M010#2500 K 100 10 40 2 125 1.7 20 2500 148 133 59 3
TLNS107M010#2500 S 100 10 40 2 125 1.7 10 2500 148 133 59 3
TLNH157M010#6000 H 150 10 40 2 125 0.8 30 6000 108 97 43 3
TLNL157M010#1300 L 150 10 40 2 125 2.9 30 1300 215 193 86 3
TLNT157M010#1500 T 150 10 40 2 125 2.6 30 1500 216 194 86 3
TLNT227M010#1300 T 220 10 40 2 125 2.9 44 1300 232 209 93 3

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance is measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalogue limit post mounting
DCL allowed to move up to 2.00 times catalogue limit post mounting
For typical weight and composition see page 274.
NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards.

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 47
040120
TLN Series
Tantalum Solid Electrolytic Chip Capacitors - Undertab Series

QUALIFICATION TABLE
TLN series (Temperature range -55ºC to +125ºC)
TEST
Condition Characteristics
Apply rated voltage (Ur) at 40ºC and / or category Visual examination no visible damage
voltage (Uc) at 85ºC for 2000 hours through a DCL 2 x initial limit
Endurance
circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within +5/-30% of initial value
temperature for 1-2 hours before measuring. ESR 1.25 x initial limit
Store at 65ºC and 90-95% relative humidity for 500 Visual examination no visible damage
hours, with no applied voltage. Stabilize at room DCL 2 x initial limit
Humidity
temperature and humidity for 1-2 hours before ΔC/C within ±10% of initial value
measuring. ESR 1.25 x initial limit
Step Temperature°C Duration(min) +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
2 -55 15 DCL 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL*
Temperature 3 +20 15
Stability 4 +85 15 ΔC/C n/a +5/-20% ±10% +20/-0% +25/-0% ±10%
5 +125 15
6 +20 15 ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25xIL*
Apply 1.3x rated voltage (Ur) at 40ºC for 1000 cycles Visual examination no visible damage
Surge of duration 6 min (30 sec charge, 5 min 30 sec DCL 2 x initial limit
Voltage discharge) through a charge / discharge resistance ΔC/C within ±5% of initial value
of 1000Ω ESR 1.25 x initial limit
Visual examination no visible damage
DCL initial limit
Mechanical
MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
Shock
DF initial limit
ESR initial limit
Visual examination no visible damage
DCL initial limit
Vibration MIL-STD-202, Method 204, Condition D ΔC/C within ±5% of initial value
DF initial limit
ESR initial limit

*Initial Limit

Voltage vs Temperature Rating

120% rated range

recommended derating
100% 100% 100%

80%
80% 80%

60% 67%

50%
40%
33%
20% 20%

0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
48 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040120
TLN Series
Tantalum Solid Electrolytic Chip Capacitors - Undertab Series

AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP

SERIES LINE UP : CONVENTIONAL SMD MnO2

High Rel. TMJ THH
ultra 230°C COTS+
& Special low DCL Hermetic

High Temp THJ THJ F97-HT3

200°C 175°C auto 135°C auto

TRJ TRM F91-AJ6 F97

Industrial & professional
professional
multianode
auto professional

Automotive

TAJ TPS F93-AJ6 F98-AJ6

auto *T/*U auto *T/*U auto auto

TPS TPM
multianode

Standard

TAJ F91 F93

Standard TAJ TAC TPC F92

Low Profile microchip microchip
Low Profile Low ESR

TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 49
030321