Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    Inspection and Maintenance Report

    Uploaded by

    ban-mrw Companies
    The document reports on maintenance issues with two diesel electric generators (DEGs) at an electric power plant. DEG No. 5 experienced a loud rubbing sound due to a broken oil jet, damaging the engine. DEG No. 3 made a grinding noise because corroded oil nozzles caused overheating, sticking the liner sleeves. Both engines were replaced and tested, with the DEGs found to be performing well.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Inspection and Maintenance Report

    Uploaded by

    ban-mrw Companies
    75 views5 pages
    The document reports on maintenance issues with two diesel electric generators (DEGs) at an electric power plant. DEG No. 5 experienced a loud rubbing sound due to a broken oil jet, damaging the engine. DEG No. 3 made a grinding noise because corroded oil nozzles caused overheating, sticking the liner sleeves. Both engines were replaced and tested, with the DEGs found to be performing well.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document reports on maintenance issues with two diesel electric generators (DEGs) at an electric power plant. DEG No. 5 experienced a loud rubbing sound due to a broken oil jet, damaging the engine. DEG No. 3 made a grinding noise because corroded oil nozzles caused overheating, sticking the liner sleeves. Both engines were replaced and tested, with the DEGs found to be performing well.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    75 views5 pages

    Inspection and Maintenance Report

    Uploaded by

    ban-mrw Companies
    The document reports on maintenance issues with two diesel electric generators (DEGs) at an electric power plant. DEG No. 5 experienced a loud rubbing sound due to a broken oil jet, damaging the engine. DEG No. 3 made a grinding noise because corroded oil nozzles caused overheating, sticking the liner sleeves. Both engines were replaced and tested, with the DEGs found to be performing well.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 5

    ALMARWA

    For General Contracting

    Inspection and Maintenance Report

    Facility DEGs Area Tag No. DEG No.5 Location LPU2

    Maintenance Person Ahmed Jumaa Date and Time 20:00 Am 05/02/2021


    Failure Description During the operation hearing a loud rubbing sound from the engine, the O&M assistance stop
    the DEG immediately from an emergency bottom.
    The Engine of DEG No.5 damage.
    Failure Cause  Full inspection of the engine by opening it found that an oil jet (Nozzle) broken, for that, the
    oil didn’t reach to gudgeon pin, led to a failure and broke the connection arm.
     Replace the engine with the new one, at 18 Feb.
     Running the DEG No.5 for 30 minutes without load at 04:20 Pm 20/02/2021.
    Final Performance The test run found the DEG no.5 in good performance and can back to the operation and supply
    the power.

    Phone: +964 783 497 2118


    info@almarwa-company.com
    Baghdad Street, Nasiriyah City, Thi Qar
    www.almarwa-company.com
    Province, Republic of Iraq
    ALMARWA
    For General Contracting

    Facility DEGs Area Tag No. DEG No.3 Location LPU2


    Maintenance Person Ahmed Jumaa Date and Time 14:00 Pm 14/02/2021
    Failure Description During the operation hearing a grinding noise from the engine, the O&M assistance stop the DEG
    no.3 immediately from an emergency bottom.

    Failure Cause  Full inspection of the Engine by opening it, the oil nozzle failure - the injection nozzles
    (corroded), so that Incorrect quantity of injected fuel to increase the combustion, therefore
    the heating rises up.
     hence, the liner sleeve stuck and damage the cylinder.
     Replace the engine with the new one, at 20 Feb.21.
     Running the DEG No.3 for 30 minutes without load at 11:30 Pm 20/02/2021.
    Final Performance The test run found the DEG no.3 in good performance and can back to the operation and supply
    the power.

    Name Signature Date


    PREPARE BY ALMARWA Haider J. Hassan 20/02/2021

    Evidences:
    Phone: +964 783 497 2118
    info@almarwa-company.com
    Baghdad Street, Nasiriyah City, Thi Qar
    www.almarwa-company.com
    Province, Republic of Iraq
    ALMARWA
    For General Contracting

    Internal inspection for the Engine of DEG No.3 Oil Jet broke of DEG No.3

    Engine Damage of DEG No.3 Engine Damage of DEG No.3

    Phone: +964 783 497 2118


    info@almarwa-company.com
    Baghdad Street, Nasiriyah City, Thi Qar
    www.almarwa-company.com
    Province, Republic of Iraq
    ALMARWA
    For General Contracting

    Internal inspection for the Engine of DEG No.5 liner sleeves stuck

    liner sleeves stuck liner sleeves damage

    Phone: +964 783 497 2118


    info@almarwa-company.com
    Baghdad Street, Nasiriyah City, Thi Qar
    www.almarwa-company.com
    Province, Republic of Iraq
    ALMARWA
    For General Contracting

    The new engine of DEG No.5 The new engine of DEG No.5 (Temp. record)

    The new engine of DEG No.3 The new engine of DEG No.3 ((Temp. record))

    Phone: +964 783 497 2118


    info@almarwa-company.com
    Baghdad Street, Nasiriyah City, Thi Qar
    www.almarwa-company.com
    Province, Republic of Iraq

    You might also like