Job Name:

Job Location:
910F Series Engineer:
Contractor:
Class 125 Swing Check Valve
Tag:
PO Number:
Representative:
Wholesale Distributor:

DESCRIPTION
The Apollo InternationalTM Model 910F Flanged Cast Iron Swing Check valve provides full flow
capabilities. It provides reliable and economical protection against reverse flow. The Model 910F
Swing Check valve can reliably be installed in most plumbing and heating systems (or building
service piping).

FEATURES PERFORMANCE RATING STANDARD MATERIALS LIST

• Compatible with ANSI 125# & 150# Flanges • Saturated Steam: Part Name Material
• Full Port 125 psi (8.6 Bar) to 353°F(178°C) (2”-12”
Bolts Steel (ASTM A307 B)
• Minimal Pressure Drop 100 psi (6.9 Bar) to 338°F(170°C) (14”-20”)
Nameplate Aluminum
• Flanged Connection • Cold Working Pressure:
• Bolted Bonnet 200 psi (13.8 Bar) at 100°F (2”-12”) Bonnet Cast Iron (ASTM A126 CL B)
• Integral Bronze Seat 150 psi (10.3 Bar) at 100°F (14”-20”) Body Gasket Graphite
• Temperature Range*: Nuts Steel (ASTM A307 B)
STANDARDS -20°F to 406°F Side Plug Brass (ASTM B16)
* Valves should be in open position to allow Gasket Graphite
• MSS SP-71, “Gray Iron Swing Check
complete drainage during freezing conditions.
Valves Flanged and Threaded” Hanger Pin Brass (ASTM B16)
• ASME B16.10, “Face-to-Face and Ductile Iron
End-to-End Dimensions of Valves” Hanger
(ASTM A536 65-45-12)
Cast Bronze (2"-6")
Disc Ring
Cast Iron (8"-20")
Disc Cast Iron (ASTM A126 CL B)
order information Washer Steel (ASTM A307 B)
Size Part Stainless Steel
(in.) Number Split Pin
(ASTM 420 S42000)
2” 6SC108B1 Cast Bronze (2"-6")
Seat Ring
2-1/2” 6SC109B1 Cast Iron (8"-20")
3” 6SC100B1 Body Cast Iron (ASTM A126 CL B)
4” 6SC10AB1 Disc Nut Steel (ASTM A307 B)
5” 6SC10BB1 Stud Bolt Steel (ASTM A307 B)
6” 6SC10CB1
8” 6SC10E01
10” 6SC10G01
12” 6SC10H01
14” 6SC10J01
16” 6SC10K01
18” 6SC10M01
20” 6SC10N01

Apollo Valves / Conbraco Industries, Inc.

701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
www.apollovalves.com | (704) 841-6000

This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specification without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.

SS1261 © 10/13 Page 1 of 2

 910F Series NOTES:
1. CONFORMS TO LATEST EDITION OF MSS SP-70.
Class 125 Swing Check Valve 2. FLANGES MEET THE REQUIREMENTS OF ASME/ANSI B
3. FACE TO FACE DIMENSIONS CONFORM TO ASME/ANSI
4. CONSTRUCTION AVAILABLE IN ALL IRON.
1

G
5

6
7
8

10

D
A
11

12

13

14

15

16 F

17 E

Size Dimensions (in.) Wt. Cv

(in.) A B C D E F G (lbs.) (Typ)
2" 2.00 8.00 4.75 6.00 0.62 0.75 4.41 26 132
2.5" 2.50 8.50 5.50 7.00 0.69 0.75 5.24 39 192
3" 3.00 9.50 6.00 7.50 0.75 0.75 5.67 47 298
4" 4.00 11.50 7.50 9.00 0.94 0.75 6.61 82 526
5" 5.00 13.00 8.50 10.00 0.94 0.88 7.80 124 852
6" 6.00 14.00 9.50 11.00 1.00 0.88 8.54 160 1272
8" 8.00 19.50 11.75 13.50 1.12 0.88 10.28 271 2278
10" 10.00 24.50 14.25 16.00 1.19 1.00 11.30 437 3588
12" 12.00 27.50 17.00 19.00 1.25 1.00 12.56 644 5342
14" 14.00 31.00 18.75 21.00 1.38 1.14 17.50 950 6512
16" 16.00 36.00 21.25 23.50 1.44 1.14 23.45 1160 8626
18" 18.00 36.00 22.75 25.00 1.56 1.25 27.50 1720 11488
20" 20.00 40.00 25.00 27.50 1.69 1.25 29.25 2094 14304
Cv = GPM @1 psi pressure drop, 60°F water
*Cv values are estimates only Apollo Valves / Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
www.apollovalves.com | (704) 841-6000

This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specification without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.

SS1261 © 10/13 Page 2 of 2