Name of Learner

Name of
Learner: ___________________________ Date: ________________
Grade/Section: ___________________________ Teacher: ________________
Subject: ___________________________ Activity No. ________________
Learning Area Computer Systems Servicing Grade Level 10

W5 Quarter Third Date Apr. 26 - 30, 2021
I. LESSON TITLE Prepare installer - USB bootable using Rufus software

II. MOST ESSENTIAL LEARNING
LO 2: Prepare Installer - TLE_IACSS9- 12ICCS-If-j-29
COMPETENCIES (MELCs)
III. CONTENT/CORE CONTENT The learners demonstrate an understanding of concepts and principles in
installing configuring computer systems.
References: https://znnhs.zdnorte.net/wp-
content/uploads/2020/11/TLE10_Q1_W5-8_CSS.pdf
TLE – Grade 10 Alternative Delivery Mode Quarter 1 – Module 5: PREPARE
INSTALLER First Edition, 2020
Suggested
IV. LEARNING PHASES Timeframe
Learning Activities
A. Introduction 30 minutes Presentation
Panimula The common to use a bootable USB drive instead of a CD/DVD drive to install
the operating system. For Windows there are a ton of software programs that
help you create bootable USB drives. Even Microsoft has its own tool. Of all the
available tools, Rufus, a free and open-source application, is one of the best. In
fact, Rufus is one of those tools that every Windows user should have in their
software catalog. Let me show how you can use Rufus to quickly create a
bootable flash drive in Windows.
Learning Activity 1:
Rules: Locate the given words in the grid, running in one of eight possible
directions horizontally, vertically, or diagonally. Answer String: Varies by puzzle.
B. Development 1 hour Rufus is a utility that helps format and create bootable USB flash drives, such as
Pagpapaunlad USB keys/pendrives, memory sticks, etc. It can be especially useful for cases
where: you need to create USB installation media from bootable ISOs
(Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an
OS installed.
How to Use Rufus to Create a Bootable Flash Drive
Note: This tutorial assumes you already have the ISO file. If you don’t have the
ISO file, you can download it from the developer website. Also, make sure that
the USB drive you are using is at least 8 GB and has no important data in it.
Use Rufus to Create Bootable USB Drive
1. First, download Rufus if you haven’t already. Along with a regular installer,
Rufus also comes in a portable variant. Download the portable version if you
don’t want to install Rufus on your system. In my case I’ve downloaded the
portable version. After downloading, install and open Rufus.
2. Plug in the USB drive, and you will instantly see it in the top drop-down
menu. Once you see the drive, click on the “Select” button.
3. In the Browse window go to where you’ve stored your ISO file, select it, and
click on the “Open” button. In my case, as I wanted to create an Ubuntu
bootable USB drive, I selected the Ubuntu ISO. You can choose the ISO of your
choice.
4. (Optional) If you want to, click on the little “Tick” icon next to the “Boot
Selection” drop-down menu to compute and see the MD5, SHA1, and SHA256
checksums of the ISO file. This is useful to verify if the ISO file has been
tampered with in any way.
5. Select “MBR” from the Partition Scheme drop-down menu and “BIOS or
UEFI” from the Target System drop-down menu. If you are trying to use this
bootable USB drive on an old system, select the “Add fixes for old BIOSes”
checkbox under the “Advanced Drive Properties” section.
6. (Optional) You can change the USB drive name using the “Volume Label”
field. Additionally, under “Advanced Format Options” make sure that the
“Quick Format” checkbox is selected. As the name implies, Quick Format
formats the drive quicker by skipping the check for bad sectors.
7. Click on the “Start” button.
8. Depending on the ISO file, Rufus may prompt you to download additional
files. For instance, to create a bootable Ubuntu drive, Rufus prompts you to
download the newer version of Syslinux. Just click on the “Yes” button, and
Rufus will take care of everything.
9. In the next prompt, select the recommended “Write in ISO image mode”
option, and click on the “OK” button. You might also see a drive format warning
– click on the “OK” button.
10. As soon as you click on the button, Rufus starts to create the bootable USB
drive. Depending on your USB drive, it can take a few minutes to complete the
creation process.
11. Once completed, you will not see a completion message but will hear a
completion sound, and the progress bar will turn fully green.
That is all. As you can see, it is pretty easy to create a bootable USB drive using
Rufus
Content Reference
https://www.winiso.com/support/tutorials/make-bootable-dvd.html
Image
https://www.winiso.com/support/tutorials/make-bootable-dvd.html
C. Engagement 1 hour and Learning Activity 2:
Pakikipagpalihan 30 minutes
Direction:Rearrange the following procedures in their proper order. Use

numbers to indicate their order of precedence. The first number is done for
you. Steps in Creating a bootable USB Media (Using Rufus)
______1. Insert the USB Drive to any USB Port in your PC.
______2. On the Boot Selection Menu, Click Select.
______3. Double click the Rufus Application to launch the program.
______4. Browse for your Windows Image file in your PC.
______5. When the status bar reached 100 percent or Ready, click Close .
______6. Click Start. When prompted with a Warning: ALL DATA… Click OK.
______7. Once its open, make sure the USB Drive you inserted can be seen
Rufus, else click the drop down arrow to select your media
Learning Activity 3.
Make a Bootable device using rufus.
Note: This activity is optional only

D. Assimilation 1 hour Learning Activity 4
Paglalapat
Instruction: Arrange the steps in making a bootable device using Rufus.
_________1. In this step you need to select “MBR” from the Partition Scheme
dropdown menu and “BIOS or UEFI” from the Target System drop-down menu.
_________2. In this step as soon as you click on the button, Rufus starts to
create the bootable USB drive.
_________3. In this step once completed, you will not see a completion
message but will hear a completion sound, and the progress bar will turn fully
green.
_________4. In this step you will Browse window go to where you’ve stored
your ISO file, select it, and click on the “Open” button. In my case, as I wanted
to create an Ubuntu bootable USB drive, I selected the Ubuntu ISO.
_________5. In this step you will plug in the USB drive, and you will instantly
see it in the top drop-down menu. 10
_________6. In this step you need to download rufus application.
_________7. In this this step you can click on the little “Tick” icon next to the
“Boot Selection” drop-down menu to compute and see the MD5, SHA1, and
SHA256 checksums of the ISO file.
_________8. In this step you can change the USB drive name using the
“Volume Label” field.
_________9. In this step you can select depending on the ISO file, Rufus may
prompt you to download additional files.
_________10. In this step you will click on the “Start” button.
_________ 11.In this step you will select the recommended “Write in ISO
image mode” option, and click on the “OK” button.
V. ASSESSMENT Learning Activity 5

(Learning Activity Sheets for Enrichment,
Remediation or Assessment to be given on
Weeks 3 and 6) For the preparation of the next module read about bootable device using
CMD/Diskpart.
VI. REFLECTION The learner, in their notebook, will write their personal insights about the lesson using
the prompts below.
I understand that ___________________.
I realize that ________________________.
I need to learn more about __________.
Prepared by: Arlene T. Villanueva Checked by: Melinda S. Abraham
Mercy Ann Giere

Name of Learner

Uploaded by

Copyright:

Available Formats

Name of Learner

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Name of Learner

Uploaded by

Copyright:

Available Formats

Name of

Learner: ___________ Date:

Grade/Section: ___________ Teacher:

Subject: ___________ Activity No.

Learning Area Computer Systems Servicing Grade Level 10

I. LESSON TITLE Prepare installer - USB bootable using Rufus software

How to Use Rufus to Create a Bootable Flash Drive

Use Rufus to Create Bootable USB Drive

7. Click on the “Start” button.

Direction:Rearrange the following procedures in their proper order. Use

Make a Bootable device using rufus.

Note: This activity is optional only

V. ASSESSMENT Learning Activity 5

You might also like