City of Seattle - Draft Modal Integration Policy White Paper With Full Appendices

updated July 1, 2021
DRAFT
Modal Integration Policy Framework
White Paper
July 1, 2021
1
About the Seattle Department of Transportation
Vision & Mission

Seattle is a thriving, equitable community powered by dependable transportation. We're on a mission to
deliver a transportation system that provides safe and affordable access to places and opportunities.
Values & Goals

Equity
We believe transportation must meet the needs of communities of color and those of all incomes,
abilities, and ages. Our goal is to partner with communities to build a racially equitable and socially just
transportation system.
Safety
We believe everyone should be able to move safely throughout the City. Our goal is to create safe
transportation environments and eliminate serious and fatal crashes in Seattle.
Mobility
We believe transportation choices are critical to accessing opportunities. Our goal is to build, operate,
and maintain an accessible transportation system that reliably connects people, places, and goods.
Sustainability
We believe environmental health should be improved for future generations through sustainable
transportation. Our goal is to address the climate crisis through a sustainable, resilient transportation
system.
Livability
We believe transportation is essential to supporting daily life. Our goal is to manage our streets and
sidewalks in a way that enriches public life and improves community health.
Excellence
We believe in exceeding the expectations of the communities we serve. Our goal is to build a team
committed to excellence and equipped with the skills to meet the challenges of today and tomorrow.
2
Purpose
Streets are fundamental to Seattle’s quality of life. They define our systems of movement, create
connections between people, places, and products, ensure access to destinations, allow for greenery
and open space, and enable public life1 to unfold. As we continue to grow and place increased demands
on our streets, it is important that we use them efficiently and wisely. Because our streets are not
always wide enough to accommodate all desired functions, we require a prioritization framework for
consistent and transparent decision-making rooted in our City values.
We have created this policy white paper to address the need for a consistent approach to decision-
making for City rights-of-way when the demands for its use exceed its physical capacity. In the near
term, this policy framework is intended to inform capital project development activities led by the
Seattle Department of Transportation (SDOT) and, in the long term, to shape our future transportation
plan and policy development activities.
Specifically, the purpose of the Modal Integration Policy Framework White Paper is to develop policy
guidance and identify next steps for how to best integrate our modal master plan networks (Transit
Master Plan, Pedestrian Master Plan, Freight Master Plan, and Bicycle Master Plan) to better address
competing needs for people walking and biking, people riding transit, freight vehicles, personal vehicles,
and critical access needs. Our policy focus is on locations where street rights-of-way are too narrow to
accommodate essential street functions, particularly our priority modal networks.
Our desired outcomes for the Modal Integration Policy Framework and its implementation include:
• Determine how to accommodate modal networks where there is constrained right-of-way space
at the planning and concept design stages instead of later within project design and delivery
stages.
• Optimize right-of-way allocation based on a policy framework that balances network function,
land use development patterns, and local context.
• Formalize a consistent and transparent approach for translating our plans and policies into
project decisions and share our approach within our outreach efforts.
• Identify considerations and opportunities for future policy and plan development that considers
the full range of community priorities for our transportation system, in addition to delivery of
our modal networks.
The policy framework and new project development tools will improve the ability to implement Seattle’s
current modal master plans, and the framework can improve future policy and plan development.
Through clear guidance that is rooted in broader city policies and values, we can more efficiently focus
on a preferred set of design options that address conflicts and trade-offs in space-constrained streets
during the project development process. This policy framework can also inform how we can develop
future policies and plans that holistically consider multi-modal needs.
Existing Policy Framework

The Modal Integration Policy Framework builds from existing City policies and plans and provides
additional guidance for staff seeking to develop complete streets and corridors in constrained areas.
1Public life is “activity that takes place in everyday public spaces—on streets, in parks and plazas, and in spaces
between buildings” (Gehl Institute). These activities support community development, vibrancy, and livability.
3
Seattle’s Comprehensive Plan, a 20-year vision and road map for guiding City decisions, defines our
City’s core values around race and social equity; environmental stewardship; community; and economic
opportunity and security. Additionally, the Comprehensive Plan articulates a long-range growth strategy
to focus population growth within urban centers and urban villages and focus industrial businesses in
manufacturing/industrial centers. The Comprehensive Plan contains our foundational citywide
transportation goals and policies, including policies on how we use street space to align with our growth
strategy. To plan for future population growth, the Plan establishes policies that prioritize space-
efficient modes of transportation, which translates to discouraging our historical reliance on single-
occupancy vehicles and focus growth within designated urban centers and urban villages. By setting
mode share targets, the Comprehensive Plan establishes the City of Seattle’s interest in encouraging
alternative forms of transportation like biking, walking, and taking transit, which are further articulated
in modal master plans. The Plan’s policy framework also provides initial guidance on how we optimize
allocating the right-of-way by defining its priority functions—mobility, access for people, access for
commerce, activation, greening, and storage. The policy framework also identifies how these functions
should be prioritized in the “flex zone”2 portion of the roadway relative to the adjacent land use context.
Safety is a core theme woven throughout all our planning and policy framework documents. As a
transportation agency, our goal is to create safe traveling environments for all users of the
transportation system. Our Vision Zero Action Plan aims to end traffic deaths and serious injuries on city
streets by 2030.
The City's Complete Street Ordinance directs the Seattle Department of Transportation (SDOT) to
design, operate, and maintain Seattle's streets to promote safe mobility, best practice design and
convenient access for all users.
We are also guided by Seattle's Climate Action Plan, which identifies transportation as the City's largest
source of greenhouse gas emissions and establishes targets for shifting travel patterns away from
vehicles using fossil fuels.
Seattle's Bicycle Master Plan (2014), Transit Master Plan (2012; amended 2016), Freight Master Plan
(2016), and Pedestrian Master Plan (2017) expand on Comprehensive Plan goals and policies to advance
use of these modes. They also identify priority networks to guide investment decisions. Even with a
large policy foundation, we lack comprehensive policy guidance for how to accommodate these
networks in places where the right-of-way is too narrow for all desired modes and uses.
The City’s commitment to the principles of racial equity through the Race and Social Justice Initiative is
another critical foundation for our approach to this work. We seek to recognize the ways our existing
policies and practices result in race-based transportation disparities and identify avenues for addressing
these disparities through this policy framework and future efforts.
More detail about the existing policy framework that informs the Modal Integration Policy Framework
can be found in Appendix A.
2 The flex zone is a zone for people and goods, providing separation between moving vehicles in the travelway and
people in the pedestrian realm. This zone can contain multiple uses along a street - including commercial
deliveries, bus stops, curb bulbs, parklets, on-street parking, and taxi zones. It can be used for mobility at specific
times of the day.
4
Despite a large existing policy foundation, we lack comprehensive policy guidance for how to
accommodate these networks in places where the right-of-way is too narrow for all desired modes and
uses. This modal integration policy framework seeks to address these policy gaps.
Approach
To understand the challenges to integrating our modal plan networks, we conducted a technical analysis
of how the modal plan recommendations overlap on our existing streets. Based on design dimensions
established in Streets Illustrated (Seattle’s Right-of-way Improvements Manual), we identified where the
right-of-way cannot accommodate all of the modal plan network recommendations. We have termed
these “deficient” because it means that one (or more) modal networks cannot fit within existing streets.
We separately assessed spatial deficiencies within the curb-to-curb area, as well as pedestrian realm
deficiencies in the area between the curb line and property line. Our analysis assumes maintaining the
existing curb-to-curb dimension. While there are special circumstances that require curbline relocation,
such as to expand the sidewalk or accommodate a needed transit lane, most capital projects maintain
existing curblines as moving them is costly and, as a result, atypical. While we assumed curblines
remained, our analysis included opportunities to re-prioritize our curb-to-curb space from general traffic
lanes and parking for transit, freight, and bicycle facilities. We also interviewed SDOT staff and reviewed
recent or ongoing projects within the project development phase (0-30% design).
We shared and discussed key findings, draft policy recommendations, and implementing actions with
the Policy & Operations Advisory Group (POAG)—a group of representatives from City commissions,
boards, the Transportation Equity Workgroup, and other advisory groups that we convened to serve as a
sounding board for this work. We also worked in parallel with a group of subject matter experts within
SDOT to do the same.
More detail about the approach and process we took to arrive at the Modal Integration Policy
Framework and next steps can be found in Appendix B.
Findings
The key findings describe the complexity of potential solutions for modal integration and the factors we
considered in the development of the policy framework and next steps. Our findings are grouped into
three themes:
• Sustainability and Racial Equity Values Must Guide Right-of-Way Allocation Policies
• Right-of-Way Allocation Decisions Require Careful Consideration of Trade-Offs
• Future Modal Planning Should Holistically Address Mobility Needs
A longer, more in-depth discussion of findings can be found in Appendix C.
Sustainability and Racial Equity Values Must Guide Right-of-Way Allocation Policies
City values should be a key driver for how right-of-way is allocated, including directly connecting right-
of-way allocation policies to actions needed to meet Seattle’s climate goals and improving modal
planning processes and right-of-way allocation decisions to advance racial equity. When it comes to
people-moving networks, without a clear priority for right-of-way decisions based on desired mode shift
outcomes and a reduction in greenhouse gas emissions, POAG members expressed concern that
walking, biking, and transit may lose out over personal vehicles when there is constrained right-of-way—
even when there are two or more lanes in a direction for general purpose traffic.
5
Our racial equity analysis relied on the processes completed for each modal plan and leaves gaps in
authentic understanding of comprehensive community mobility needs—particularly Black, Indigenous,
and people of color (BIPOC) communities. Future planning efforts should include BIPOC and localized
community needs to help place individual modal needs into context.
Right-of-Way Allocation Decisions Require Careful Consideration of Trade-Offs

Our modal master plans’ priority networks sometimes require more street space than is available, based
on current curb-to-curb pavement. Seattle’s arterial street network contains 5,269 street
segments (defined as the length of street between intersections) that are designated as part of a
planned modal network (Bicycle Master Plan, Transit Master Plan, and/or Freight Master Plan) intended
to fit between the curb-to-curb dimensions. Detailed discussions of the analysis approach and findings
can be found in Appendix B and Appendix C, respectively. Based on our analysis, we found that
most streets are able to accommodate the modal networks in the existing curb-to-curb dimension,
even where modal networks overlap (demonstrated by the green and yellow areas in Figure 1). Most of
the accommodation would come from re-prioritizing our curb-to-curb space from underutilized general
traffic lanes or parking. As illustrated by the red areas in Figure 1, only 8% (440) of these street
segments have curb-to-curb widths that are too narrow to accommodate all designated modal plan
networks. Of the 440 arterial street segments with curb-to-curb widths too narrow to accommodate all
modal plan networks, all but one includes a planned bicycle facility. This means projects to build out the
Bicycle Master Plan network will come with the most trade-offs around other uses within the right-of-
way.
When implementing the bicycle, transit, and freight modal networks (those within the curb-to-curb
space), we found that modal plan networks will frequently impact other essential functions, such as
access and loading, that take place in the flex zone, illustrated by the yellow areas in Figure 1. A
majority of arterial street segments have curb-to-curb widths sufficient to accommodate priority modal
networks, and still maintain 1 or more flex zones; however, many segments do not. Through our
conversations with staff and POAG, we consistently heard that access functions are essential for all land
uses and should be addressed and, in some cases, prioritized in right-of-way allocation decisions.
Overall, curb access needs should be evaluated more consistently within our project development
processes. While these segments are not “deficient,” they often present challenges within the design
and outreach processes.
Seattle’s Comprehensive Plan growth strategies call for denser development and investment in urban
centers and urban villages. These locations are regional draws and are places where people work, live,
learn, and play. Most of the deficient street segments are located on arterials that provide direct
connections between our urban centers and urban villages, which are critical for people and goods
movement that support and enable our growth strategy.
6
Figure 1: Ability for Arterial Street Segments to Accommodate Modal Networks in Curb-to-Curb
Dimensions, Based on Designated Network Type(s)
Does not fit Fits with removal of turn or flex lane(s) Fits
Bicycle Master Plan Only 223 598 829
Transit Master Plan Only 389
Freight Master Plan Only 313
Bicycle Master Plan +

53 297 748
Transit Master Plan
Bicycle Master Plan + 45

Freight Master Plan 48 220
Transit Master Plan +

1 722
Freight Master Plan

Transit Master Plan + 118 265 399
Freight Master Plan
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800

Number of Arterial Street Segments
In addition to the curb-to-curb roadway dimensions, we analyzed the pedestrian realm of our arterial
street network to understand spatial right-of-way deficiencies beyond the roadway. We identified 384
street segments that are substantially deficient to meet sidewalk infrastructure needs (defined as more
than 3 feet too narrow). We heard from POAG members that pedestrian safety, access, and
convenience are key priorities for consideration in right-of-way allocation that could impact curb-to-
curb priorities in most parts of the city. Remedies to provide the needed right-of-way are limited to
moving the curb line or acquiring additional right-of-way, which can be difficult in more urbanized
areas.
Future Modal Planning Should Holistically Address Mobility Needs

We were not able to directly address all findings in our Modal Integration Policy Framework. Those we
could not address can serve as considerations for future modal planning. For example, we intend to
7
explore aligning the Modal Integration Policy Framework with signal operations to further advance
modal integration and facilitate priority movement for modes.
Across the board, we heard enthusiasm for thinking creatively about the future of modal planning to
address shortcomings outlined through this process. POAG members expressed support for a new
approach to planning transportation networks that veers away from separate modal plans towards
holistically addressing mobility and access needs. Members expressed a desire for a stronger policy
framework to support our climate action and drive-alone rate goals that must also account for how
these goals can be equitably met. We also heard concerns about how significant transportation policy
shifts could adversely impact people with less access to transportation options that enable a car-free or
car-light lifestyle, such as some BIPOC community members, people who have been displaced from
Seattle because of the housing affordability crisis, and people living with disabilities.
While some of the findings we uncovered are addressed through the Modal Integration Policy
Framework, there are also findings that lend themselves to larger solutions, which are discussed in
“Next Steps.”
Policy Framework to Support Modal Integration

The Modal Integration Policy Framework provides guidance on how to support integration of our 4
modal plan priority networks and, when necessary, how to prioritize modes where there is deficient
right-of-way to accommodate all planned network improvements and other priority functions. The
framework includes 3 geographic policy priorities based on whether the deficient street segment is
located within an urban center or urban village, within a manufacturing/industrial center (MIC), or
elsewhere in the city. It also includes Critical Bicycle Connections, a citywide strategy for identifying
segments within the bicycle network that have no viable alternatives to be relocated and are critical to
network integrity. Note that several forthcoming policy initiatives referenced below are discussed in
more detail in the Next Steps section.
Within Urban Centers and Urban Villages

Areas located within our urban centers and urban villages are places to prioritize pedestrians. These
areas include our densest residential and commercial buildings and our busiest areas for people walking.
The arterials within our urban centers and urban villages have their own street type classifications
within Streets Illustrated, which emphasize safe accommodations for shorter trips, transit priority, and
access needs. When there is insufficient right-of-way to accommodate all modal plan priorities, this
policy recommends prioritizing space for people walking.
Goal: Within urban centers and villages, ensure the right-of-way is prioritized to achieve safe and
comfortable places for people walking and enjoying public space.
Policy:
• When there is insufficient right-of-way to accommodate all modal plan priorities within an
urban center or urban village, prioritize, provide, and/or preserve pedestrian infrastructure
(sidewalk clear zone, landscape/furniture zone, and frontage zone) to meet applicable Streets
Illustrated design standards.
Considerations as we apply this policy:
8
urban center or urban village, and where sidewalk width (including the clear zone and
landscape/furniture zone) is deficient (at least 3-feet too narrow), a capital project’s scope shall
aim to expand sidewalks into the flex zone to meet applicable Streets Illustrated standards or, at
minimum, protect access and parking functions within the flex zone to ensure our future ability
to expand the sidewalk to meet Streets Illustrated standards.
urban center or urban village, favor shared street design instead of rigid spatial delineation of
modes and optimize pedestrian design standards on designated Green Streets.3
• Where there are multi-family residential and commercial buildings, identify and address critical
building access needs, including passenger and package delivery, goods services, and solid waste
management, whenever flex zone changes are considered.
Outside Urban Centers, Urban Villages, and Manufacturing/Industrial Centers

Areas located outside our urban centers, urban villages, and manufacturing/industrial centers (MICs) are
places to prioritize transit mobility. These areas tend to have a low-density-residential land use pattern
with fewer commercial destinations, fewer signalized intersections, and fewer transit stops. These
arterial segments are typically classified as a “Connector” street type in Streets Illustrated, which are
focused on movement of people and goods between centers, villages, and MICs. As a result, when there
is insufficient right-of-way to accommodate all modal plan priorities, this policy recommends prioritizing
space for transit.
Goal: Outside of urban centers, urban villages, and MICs, ensure the right-of-way is prioritized for transit
travel time and reliability while designing for safety of all users, and meeting design standards for
freight.
Policy:
• When there is insufficient right-of-way to accommodate all modal plan priorities outside of
urban centers, urban villages, and the MICs prioritize transit travel time and reliability.

• When there is insufficient right-of-way to accommodate all modal plan priorities outside of
urban centers, urban villages, and the MICs, prioritize right-of-way allocation for transit-serving
features including dedicated transit lanes (where policy thresholds are met) and traffic signal
queue jumps.
• Consider implementing shared transit and freight lanes along routes that are also major truck
streets to jointly prioritize freight and transit travel time and reliability.
• If necessary, update the right-of-way deficiency analysis assumptions to reflect any refinements
to the transit lane policy thresholds.
• Where there are multi-family residential and commercial buildings, identify and address critical
building access needs, including passenger and package delivery, goods services, and solid waste
management, whenever flex zone changes are considered.
3A Green Street is a land use code designation and acts as an overlay to the street type assignment. Green Streets
are designed to give priority to pedestrian circulation and open space over other transportation uses.
9
In Manufacturing/Industrial Centers
Areas located within our manufacturing/industrial centers (MICs) are places to prioritize freight mobility.
These areas are home to Seattle’s port facilities and other major generators of truck traffic. These
arterial segments are typically classified as an “Industrial Access” street type in Streets Illustrated, which
are focused on movement of goods within and between MICs and the regional highway system. As a
result, when there is insufficient right-of-way to accommodate all modal plan priorities, this policy
recommends prioritizing space for freight and goods movement.
Goal: Within the MICs, ensure right-of-way is prioritized for safe and reliable freight mobility and
operations while ensuring safety and meeting design standards for transit, and people walking and
biking.
Policy:
• When there is insufficient right-of-way to accommodate all modal plan priorities within a MIC,
prioritize freight and urban goods reliability by ensuring that Streets Illustrated freight design
standards are met on the freight network.

• When there is insufficient right-of-way to accommodate all modal plan priorities within a MIC,
prioritize right-of-way allocation for freight reliability by considering freight-only lanes, where
forthcoming policy guidance is met.
• Consider implementing shared freight and transit lanes along busy transit routes and major
truck streets to jointly prioritize freight and transit travel time and reliability.
• Where freight routes share a street with a bicycle route, facilities for trucks and bicycles should
be clearly separated and comply with width and materials standards, consistent with Streets
Illustrated.
At Critical Connections in the Bicycle Network

As the Comprehensive Plan highlights, one of the key approaches to prioritizing space-efficient modes of
transportation that align with our region’s growth strategy is to encourage bicycling. Connected bicycle
facilities are crucial for making cycling a safe and convenient transportation choice. When it comes to
building out the bicycle network, the Bicycle Master Plan outlines the following: “While all efforts will be
made to implement the recommended bicycle network on the multi-modal corridors, people riding
bicycles can more easily be accommodated on parallel non-arterial streets than can the other modes”
(2014 Bicycle Master Plan, page 70). Within the Comprehensive Plan, this strategy is further established
as a Complete Corridors option for tackling areas within limited right-of-way.
Where analogous parallel routes or parallel streets do not exist, there is no clear policy framework for
prioritizing bicycle infrastructure. The Critical Connections policy and subsequent map seeks to identify
those critical segments and connections. And within those critical segments, this policy recommends
first prioritizing space for bicycle infrastructure to ensure we are able to build connected facilities and
networks to encourage safe and convenient cycling trips, regardless of the geographic context.
Goal: Ensure that right-of-way is prioritized at key street segments for critical connectivity to fulfill the
goals and intent of the citywide Bicycle Master Plan network along routes where there is no analogous
all ages and abilities alternate route within the corridor.
10
Policies:
• Critical Bicycle Segments implementation should strive to achieve all ages and abilities design
types and fully achieve Streets Illustrated design standards.
• On arterials within urban centers and urban villages, Critical Bicycle Connections share priority
with pedestrian infrastructure.
• On arterials between urban centers and urban villages with a Critical Bicycle Connection, first
prioritize right-of-way space for standard bicycle facilities while meeting design standards for
freight, consistent with Streets Illustrated.
• On arterials within MICs with a Critical Bicycle Connection, prioritize right-of-way space for
standard bicycle facilities while meeting design standards for freight, consistent with the design
standards in Streets Illustrated.

• Designate Critical Bicycle Segments on the 2014 Bicycle Master Plan Network for use as a Project
Development tool for corridor projects until the network map is formally updated. The map will
help prioritize right-of-way allocation where the right-of-way is identified as deficient and where
there are trade-offs between modal priorities and other priority functions of the right-of-way.
• On arterials that are outside of urban centers and urban villages that are Critical Bicycle
Connections, consider bicycle design options that are not within the curb-to-curb area if
necessary to achieve bikeway design standards.
• On arterials within urban centers and urban villages that are Critical Bicycle Connections,
especially where there is insufficient right-of-way, consider creative design approaches such as
shared street design, restrictions to vehicle movement, or one-way travel in order to jointly
prioritize space for people bicycling and walking.
Next Steps
In addition to the development of the policy statements above, there are several key steps to fully
integrating our modal plans and policies:
1. Complete complementary policies around right-of-way allocation and prioritization to affirm a

pedestrian-first approach in urban centers and urban villages and to establish when and where
to designate transit-only lanes, transit + business access (BAT) lanes, freight-only lanes, and
shared freight-and-transit lanes.
2. Prepare project development tools to include creation of a ROW deficiency analysis map,
identification of Critical Bicycle Segments, development of policy-framework communications
tools, and completion of a curbspace priority policy and related flex zone change guidance.
3. Integrate our modal plans into a citywide transportation plan.
We aim to complete the first two steps above in 2021. The third step is a major planning process that
will take time to launch and complete. Each of these activities is further discussed below.
11
Complementary Policies and Actions to Inform Right-of-way Allocation Decisions

Concurrent with the development of the Modal Integration Policy Framework, we have several
complementary policies in parallel development. Once completed, they will support and build upon the
Modal Integration Policy Framework.
Prepare a People Streets and Spaces Plan (PSS)

As described within Appendix C, our current Pedestrian Master Plan is missing a pedestrian-oriented
map that prioritizes the creation, improvement, and management of public spaces, and special areas in
the right-of-way. In addition to traffic safety as a top priority, and to achieve our livability goal, we need
to support active, sustainable transportation by creating welcoming and safe spaces for public life and
providing essential pedestrian infrastructure such as pedestrian lighting, landscaping, seating, and public
art to support pedestrians of all ages and abilities. Within development of the citywide integrated
transportation plan, described below, we will integrate a people streets and places layer. This new layer
would bring together pedestrian movement and pedestrian places, encompass existing Green Streets
(streets designated by Seattle Municipal Code that give priority to pedestrian circulation and open space
over other transportation uses), existing street concept plans, existing and proposed pedestrianized
streets, special alleys, and plazas in the right-of-way. This project would do so by recommending a new
“People Streets and Spaces Plan” to inform future large capital investments in the public realm.
Bell St is an example of an urban curbless street that is designed to

provide additional pedestrian comfort and amenities.
(Source: Map data © 2021 Google)
The intended outcomes of the PSS plan would be to encourage equitable investments in public spaces
within underinvested areas; to identify funding mechanisms for the design and maintenance of existing
and new public spaces in the right-of-way; to build our capacity to plan and construct community
spaces; and to cultivate livability through enhanced mobility that also serve to support economic and
community development. Next steps include:
• Map the existing neighborhood greenways, Green Streets, linear parks, park boulevards,
woonerfs, “main” streets, and any other pedestrian-oriented street segments in Urban Centers
and Urban Villages.
12
• Analyze gaps in the recommended plans and improvements to develop a strategy and identify
and recommend opportunities for a complete network of pedestrian priority streets and places
principally focused within Urban Centers, Urban Villages, and underinvested areas.
• Integrate with the upcoming Citywide Integrated Transportation Plan scope to refine and
opportunities and strategy through community engagement and public discussions. Develop an
implementation plan.
Prepare a Transit Lane Policy

A transit lane policy will guide citywide
deployment of transit-only lanes and
business access and transit (BAT) lanes.
This policy will support the City’s goals to
reduce drive-alone rates, reduce climate-
harming emissions, make efficient use of
the right-of-way, and provide affordable,
reliable travel options. Importantly, this
policy will provide key guidance to support
modal plan integration by identifying
locations within the Frequent Transit
Network and along other busy transit
routes where right-of-way allocation is
needed or should be preserved. We will
develop the policy with stakeholder input
and in coordination with King County Example of a bus-only lane with red surface
Metro. Through the transit lane policy, we treatment
will work to:
• Guide transit lane implementation to support bus and streetcar service.
• Consider factors such transit volumes, feasibility, equity, benefit to transit passengers, and
impacts to other travel modes.
• Identify candidate street segments for transit lanes.
• Clarify the time period/duration for when dedicated lanes are in effect and when they may be
used for business access or general-purpose traffic.
• Provide guidance on when to consolidate nearby bus routes to optimize transit lanes and
improve rider travel times and reliability.
• Consider critical curb needs for transit layover, businesses, and residential properties along
planned routes to ensure that loading needs are managed and support efficient and enforceable
transit lane operations.
13
Prepare a Freight Lane Policy

Preparation of a freight lane policy
will support safe and reliable
movement not only of goods but
also of people when implementing
freight-priority lanes—whether
through freight-only or shared
freight-and-transit lanes. This policy
will support the City’s goals for a
thriving port and industrial sector,
make efficient use of our right-of-
way, help ensure reliable goods
delivery, and reduce our climate- Example of a lane designated for freight use only on Alaskan
harming emissions. The policy Way S (Source: Map data ©2021 Google)
development process will include
stakeholder engagement. Through the freight lane policy, we will work to:
• Support the modal integration policy and the prioritization of freight movement within the
manufacturing/ industrial centers (MICs).
• Establish criteria to guide the selection and prioritization of potential freight lanes.
• Prioritize opportunities for freight-only lanes first within the Major Truck Street (MTS) network,
followed by other truck streets designations within the Freight Master Plan.
• Prioritize freight-only access lanes to alleviate bottlenecks for streets serving commercial and
industrial activities.
• Consider temporary freight-only lanes during regularly occurring events that generate high
commercial truck activity, such as access to terminals for cruise ship restocking.
• Identify criteria to guide freight permission within transit lanes (freight + transit or FAT lanes),
including how to minimize impacts on transit travel time and reliability such as by time of day
use. These criteria will also include how to manage impacts on bicycle travel and the bicycle
network, as people riding bicycles are generally allowed in transit lanes.
• Recommend strategies to improve freight-related data collection to better evaluate the
effectiveness of freight lanes as they are implemented.
Prepare Project Development Tools

Develop modal plan constraint map and proposed solutions by applying policy framework
Building on the modal integration analysis and policy development, we will take several additional steps
to support operationalization of the policy framework. These steps will help SDOT staff connect the
policies with their projects and support consistent policy application. This work will include:
• Train staff on the new policies as part of our regular Complete Streets training modules.
• Incorporate our analysis, mapping tools, and policy language within our in-house Complete
Streets checklist and project development tools.
14
Develop outreach and engagement tools to support community conversations

SDOT is developing easy-to-understand graphics and diagrams to use for community outreach and
engagement. The tools aim to help connect our vision, values, and policies to specific project decisions
and are designed to help tailor conversations to specific audiences and media. The next step aims to:
• Create storytelling materials to connect Comprehensive Plan and other relevant policies to
individual projects.
• Align communication materials with current and future practice.
• Tailor outreach and engagement to different audiences and support constructive conversations
around ways to make our streets safer, more equitable, and more efficient for all modes.
Develop flex zone/curbspace change guidance

The implementation of our modal plans often impacts curbside functions within the flex zone. Our
current policy framework prioritizes critical access and loading needs within our rights-of-way. This work
will update our Curbspace Priority policy to strengthen how we maintain and enhance those critical
building access needs at the curb.
If a plan or project has the potential to remove or affect the curb/flex zone, the critical access needs of
the curb and the buildings along the blockface should be documented, accounted for, and the needs
addressed in a way that ensures buildings’ access needs can be met. To ensure projects take these
intentional steps to address critical access needs, we will create policy guidance and a toolkit to support
more consistent, predictable approach to critical access and loading needs as follows:
• Complete a curbspace priority policy and integrate within Streets Illustrated, Complete Streets
Checklist, and the City’s Comprehensive Plan, including clear definition of our critical access
needs.
• Finalize curbspace review checklist for use in identifying and mitigating impacts to critical
curbspace access needs.
• Prepare a curbside toolkit to illustrate the range of solutions to manage loading needs at the
curb.
Develop Critical Bicycle Connections Map

SDOT is preparing a bicycle priority map of critical connections for internal guidance to be used by
project developers. This map helps operationalize the policy statements included in the previous
section. Currently the Bicycle Master Plan includes a map of Citywide bicycle routes as well as Local
bicycle routes. The additional critical connections layer will ensure that right-of-way is prioritized for
connectivity to fulfill the goals and intent of the Bicycle Master Plan. We will work with the Bicycle
Advisory Board to discuss the goals and intent of the critical connections layer. Through the Critical
Bicycle Connection map, we will work to:
• Prioritize safety for all users and create critical connections for an all ages and abilities bicycle
network.
• Identify Critical Bicycle Segment candidates within our Bicycle Master Plan network map using
topography, destination connectivity, route directness, right-of-way width, and modal plans.
• Create a Critical Bicycle Connections mapped layer using standardized considerations to
determine candidates for bicycle right-of-way priority connections.
• Use right-of-way deficiency analysis to emphasize modal and flex zone trade-offs along Critical
Bicycle Connection segments in the mapped layer.
15
• Integrate the mapped layer into the complete streets process.
Integrate Our Modal Plans into a Citywide Transportation Plan

A citywide integrated transportation plan will allow us to further the work of the Modal Integration
Policy Framework. First and foremost is the opportunity to engage the community in a discussion about
their mobility and pedestrian realm needs and aspirations for their streets in a way that cuts across all
modes and uses of the right-of-way. We believe a broad-based outreach process, especially one that
centers Black, Indigenous, and people of color residents and businesses, is essential to shape our policies
and investments towards creating a more equitable transportation system. In addition to an equity
focus, there is also an opportunity to center SDOT core values of safety, sustainability, mobility,
livability, and excellence.
Stemming from our core values are a variety of formal goals and targets, many of which are embedded
in the modal or topical plans (e.g., Vision Zero Action Plan). These include targets related to climate
action, access, network implementation, and mode share. A citywide plan allows us to think holistically
and strategically about how to achieve our aspirations for our streets, public spaces, and transportation
system.
We also have an opportunity to align our citywide plan with our overall growth strategy. In 2021, Seattle
will launch a major update to the Comprehensive Plan for adoption in 2024. We have an opportunity to
align our transportation and public space network planning with the Office of Planning and Community
Development’s focus on land use planning. This can include joint outreach activities and coordinated
policy and projects. Our coordination will allow us to consider population and employment growth, any
proposed changes to our growth target areas, and the logistics needs of our business and industrial
communities so that we can continue to grow a healthy economy, reduce car dependency, invest in our
public spaces, and create healthier communities.
Reinforcing this schedule is the Levy to Move Seattle, which expires in 2024. A citywide integrated
transportation plan can help guide the City towards the development of a funding strategy that supports
future program and project investments.
In addition, a citywide integrated transportation plan will allow us to tackle some of the opportunities
we identified in the Modal Integration Policy Framework White Paper process, with a focus on more
fully integrating the modal plan networks. We found compelling examples of integrated plans from
Amsterdam, Los Angeles, and Washington, DC. These cities created unified policy frameworks and a
more robust Complete Streets approach to their plans and policies. In addition to integrating the 4
modes within our existing modal master plans, we can better articulate the role of personal vehicles,
more equitably invest in people streets and public spaces, and shape how recent, emerging, and future
mobility can help create a more equitable and sustainable transportation system.
16
Acknowledgements
Policy & Operations Advisory Group

Members Board, Committee, or Commission
Pierre Brunelle Bicycle Advisory Board
Alexander Lew
Mike Stewart (Ballard BIA) Business Improvement Association
Warren Aakervik Freight Advisory Board
Geri Poor
Dorene Cornwell Pedestrian Access Advisory Committee
Steven Feher
Emily Mannetti Pedestrian Advisory Board
Anna Zivarts
David Goldberg Planning Commission
Grace Kim
Erin Tighe Transit Advisory Board
Bryce Kolton
Kiana Parker Transportation Equity Workgroup
Yordanos Teferi
SDOT Project Team

Jonathan Lewis (co-lead)
Susan McLaughlin (co-lead)
Radcliffe Dacanay
Aditi Kambuj
Chad Lynch
Lizzie Moll
Dusty Rasmussen
Ellie Smith
Laura Wojcicki
SDOT Core Team (Subject Matter Experts)

Name Division Name Division
Erich Ellis Capital Projects Sara Zora Project Development
Janet Mayer Capital Projects Serena Lehman Project Development
Colin Drake Downtown Mobility Diana Holloway Street Use
Joe Markovich ROW Maintenance and Urban Alex Pazuchanics Transit & Mobility
Forestry
Gabriel Seo Policy & Planning Brian Hamlin Transit & Mobility
Laeth Al-Rashid Project Development Briana Lovell Transit & Mobility
Brad Topol Project Development Mary Catherine Snyder Transit & Mobility
Brian Dougherty Project Development Mike Estey Transit & Mobility
Caylen Beaty Project Development Nico Martinucci Transit & Mobility
David Burgesser Project Development Dongho Chang Transportation Operations
Louisa Miller Project Development Matt Beaulieu Transportation Operations
Monica Dewald Project Development
17
Appendix A: Existing Policy Framework

The Modal Integration Policy Framework builds from existing City policies and plans and provides
additional guidance for staff seeking to develop complete streets and corridors in constrained areas.
This section provides background on existing plans that are foundational to our recommendations,
including: documents and initiatives that establish values upon which additional policy should be based
(Comprehensive Plan, Complete Streets Ordinance, Climate Action Plan, and Race and Social Justice
Initiative); the 4 modal master plans (pedestrian, bicycle, transit and freight) that establish mobility
networks; and implementation standards to ensure street design meets the needs of these networks
(Streets Illustrated: Seattle’s Right-of-Way Improvements Manual). See Figure 2 for an overview of how
the existing policy framework functions as a whole.
Figure 2: City of Seattle Plans and Key Policy Initiatives
18
The Comprehensive Plan

The Comprehensive Plan is a 20-year vision and roadmap for Seattle’s future that documents policies to
guide growth. The Plan has the goal of fostering a healthy and vibrant city for years to come. To plan for
future population growth, the Comprehensive Plan establishes policies that prioritize space-efficient
modes of transportation, which translates to discouraging our historical reliance on single-occupancy
vehicles (see Figure 3), and focus growth within designated urban centers and urban villages. By setting
mode share targets (discussed further below in Figure 7), the Comprehensive Plan establishes the City of
Seattle’s interest in encouraging alternative forms of transportation like biking, walking, and taking
transit, which are further articulated in modal master plans.
Figure 3: Street Capacity Gains with Trips Converted from Single-Occupancy Vehicles (SOVs) to
Alternative Modes
As the City’s long-range growth management plan, the Comprehensive Plan contains foundational
policies related to complete streets and modal integration. The Transportation section of the
Comprehensive Plan lists several goals and associated policies that apply to modal plan integration, and
in fact specifically recommends a policy framework for evaluating right-of-way allocation trade-offs.
Transportation Goal 1 (TG 1): Ensure that transportation decisions, strategies, and investments support
the City’s overall growth strategy and are coordinated with [the Comprehensive Plan’s] land use goals.
As the city continues to accommodate new growth primarily through compact development focused
within urban centers and urban villages, the transportation system needs to evolve and transform
accordingly. As such, transportation investments and operational decisions should reflect local land use
needs, as well as network integrity. Together, coordinated land use and transportation investments can
help to make progress towards the City’s mode-share and climate goals.
Transportation Goal 2 (TG 2): Allocate space on Seattle’s streets to safely and efficiently connect and
move people and goods to their destinations while creating inviting spaces within the rights-of-way.
• T 2.5, Prioritize mobility needs in the street travelway based on safety and … the modal plan
networks
19
• T 2.8, Employ the following tactics to resolve potential conflicts for space in the right-of way:
o Implement transportation and parking-demand management strategies to encourage more
efficient use of the existing right of way.
o Allocate needed functions across a corridor composed of several streets or alleys, if all
functions cannot fit in a single street.
o Share space between travel modes and uses where safe and where possible over the course
of the day.
o Prioritize assignment of space to shared and shorter-duration uses.
o Encourage off-street accommodation for non-mobility uses, including parking and transit
layover.
• T 2.9, Develop a decision-making framework to direct the planning, design, and optimization of
street right-of-way
Goal 2 includes two critically important policies. First, this goal establishes safety and modal plan
implementation as our two top priorities. This aligns with the City’s Vision Zero goal of eliminating traffic
deaths and serious injuries on city streets by 2030; SDOT intends to meet this goal by implementing a
variety of strategies outlined in the Vision Zero Action Plan. Efficient movement is important, but not at
the cost of safety. While this goal underscores the priority of modal plan networks in ROW allocation
and design decisions, it does not suggest to ignore or discount how other functions of the ROW should
also be accommodated in these decisions.
Second, Goal 2 also provides high-level policy guidance on how to resolve conflicts and weigh trade-offs
(T2.8). While these tactics are essential, the guidance stops short of establishing a policy framework for
what to do when there are multiple modal plan priorities within a corridor and not enough right-of-way.
The Comprehensive Plan provides initial guidance for street optimization by defining the priority
functions of the right-of-way, which SDOT has further elaborated. The 6 priority functions of the right-
of-way, as defined in Figure 4 below, are mobility, access, for people, access for commerce, activation,
greening, and storage.
20
Figure 4: Right-of-Way Priority Functions
While these 6 functions of the right-of-way are critical, each is typically present in only certain zones of
the right-of-way. These right-of-way zones are: the pedestrian realm (typically the sidewalk area
between the property line and the curb), the travelway (portion of the road typically dedicated for
mobility purposes), and the flex zone (the portion of the road with more flexible usage such as for access
and mobility functions typically found along the curb). See Figure 5 below for a depiction of what
functions are present in each right-of-way zone. As it shows, the flex zone can be the location of all 6
functions of the right-of-way.
21
Figure 5: Cross Section Showing the Location of Right-of-Way Functions
The Comprehensive Plan applies these concepts by describing the priorities for the right-of-way “flex
zone” based on the predominant land use of the area. The Plan prioritizes the 6 functions in the “flex
zone” relative to 3 land use types (Figure 6): commercial/mixed-use areas, industrial areas, and
residential areas. In all 3 areas, the top priority within the flex zone is “modal plan priorities.” While
“modal plan priorities” (meaning modal networks) is at the top of the list across all land use types, this
does not mean that we would only address other needs once the top priority is addressed. We often
work to incorporate essential access needs (e.g., commercial loading, bus stops, or passenger drop off)
within the right-of-way in addition to modal plan priorities.
22
Figure 6: Priorities for Right-of-Way “Flex Zone” by Predominant Use of Area
The other two right-of-way zones—pedestrian realm and travelway—are not addressed or assigned
priority in the same way in the Comprehensive Plan. This modal integration process aims to clarify what
those priorities are that are not clearly defined in the Comprehensive Plan.
Complete Streets Ordinance

Adopted in 2007, the City’s Complete Street Ordinance (122386) directs SDOT to “design, operate, and
maintain Seattle’s streets to promote safe and convenient access and travel for all users.” Users
encompass people walking, riding bicycles, taking transit, and people of all abilities, as well as people
driving freight and motor vehicles. Complete Streets is among our foundational policies: it is
incorporated in our Comprehensive Plan and guided preparation of our four modal master plans. Our
approach to delivering Complete Streets is operationalized as a comprehensive assessment tool that is
required to be completed during the project delivery process before a project passes the 30% design
milestone. Scope, design, and funding decisions are made during this early phase of any given project.
As noted, the Comprehensive Plan recommends a “Complete Corridors” approach if all functions cannot
fit in a single street, and we should allocate needed functions across a corridor composed of several
streets or alleys.
Climate Action Plan

The 2013 Climate Action Plan provides a framework for meeting Seattle’s climate protection goals,
including the overarching goal of becoming carbon neutral by 2050. Road transportation is a critical
focus of the plan given that it is the largest source of greenhouse gas (GHG) emissions, making up
approximately 62% of the City’s core emissions. Of this subset of emissions, personal vehicles emit more
than half of transportation emissions.
23
The City’s 2030 goal is to reduce GHG emissions from passenger vehicles by 82% and vehicle-miles
traveled by 20% relative to the 2008 baseline. One of the key methods for achieving GHG reductions is
shift travel modes away from vehicles that use fossil fuels. Mode share targets from the Climate Action
Plan and other major policy documents are shown in Figure 7.
Figure 7: Seattle’s Key Mode-Share and Access Targets

Plan Indicator Target
Comprehensive Plan Mode-share, non-work trips 75% citywide by 2035 (neighborhood-
(2019) citywide, not driving alone specific targets exist depending on
density)
Pedestrian Master Plan Percent of sidewalks within 100% of PIN arterial sidewalks
(2017) Priority Investment Network complete by 2035
(PIN) completed
Walk mode share, all trips 35% of all trips are made on foot by
2035
Transit Master Plan Access to frequent transit 72% of households within a 10-minute
(2012/2016) walk of 10-minute or better service
Bike Master Plan Mode-share for bicycling, all Quadruple bicycling by 2030
(2014) trips
Climate Action Plan Passenger vehicle emissions 82% reduction in climate warming
(2013) emissions by 2030 (from 2008 baseline)
Vision Zero Action Plan Downward trend in traffic- Zero traffic deaths and serious injuries
(2015) related fatalities on city on city streets by 2030
streets
Race and Social Justice Initiative

The Race and Social Justice Initiative (RSJI) is the City’s commitment to eliminate racial disparities and
achieve racial equity in Seattle. The Initiative's long-term goal is to change the underlying system that
creates race-based disparities in our community and to achieve racial equity. RSJI provides tools and
framing for racial equity analysis to help guide decision making. See Appendix B for a discussion of how
we used a Racial Equity Toolkit to inform this work.
Modal Plans
The City’s long-range plans for walking, biking, transit, and freight—the modal master plans—provide
the framework for moving people and goods safely and efficiently throughout the city. These plans
direct investment to achieve policy objectives and address current and future mobility needs. Our modal
plans originate from the Comprehensive Plan’s imperative to reduce reliance on personal vehicles and
to establish connected networks to guide capital projects that help us meet our modal targets for biking,
walking, and transit. We have not established a modal plan for personal vehicles because our
transportation system was largely built for cars; modal plans attempt to counteract this to create more
sustainable travel options and make more efficient use of our ROW.
24
We prepared and adopted these plans at different times over the past decade and each plan has mode-
specific visions:
• The Bicycle Master Plan (2014) vision is to make riding a bike a comfortable and integral
part of daily life in Seattle for people of all ages and abilities.
• The Transit Master Plan (2012, amended in 2016) envisions a city that is served by a
network of high-quality, frequent transit routes that connect urban centers, urban villages,
and manufacturing/industrial centers in a manner that is accessible for people of all
abilities.
• The Freight Master Plan (2016) vision is of a vibrant city and thriving economy
connecting people and products with Seattle to regional and international markets.
• The Pedestrian Master Plan (2017) aims to make Seattle the most walkable city in the
nation.
Each modal master plan contains a “priority network,” which provides a clear and connected collection
of streets that enables optimal mobility for the particular mode. Additionally, each network directs
funding investments and informs right-of-way allocation.
25
Bicycle Master Plan: Recommended Bicycle Network
The Recommended Bicycle Network in the

Figure 8: Recommended Bicycle Network from the
City’s oldest modal plan consists of two
Bicycle Master Plan
network categories: Citywide Network and
Local Connectors.
• The Citywide Network ensures that all
of the city’s urban centers and urban
villages are connected by an “all ages
and abilities” bikeway. These
citywide, neighborhood-connecting
bikeways are often the places where
bike facilities have to be on arterials
and experience conflicts with other
modes.
• Local Connectors provide access to
the Citywide Network and
comfortable and convenient travel by
bike within Seattle’s neighborhoods.
These facilities can often be
accommodated on residential streets.
The Recommended Bicycle Network consists

of several types of facilities: off-street, cycle
track (now commonly called “protected
bicycle lane” or “PBL”), and neighborhood
greenway. Three-quarters of these facilities
are located on residential streets and one-
quarter on arterial streets. In total, the
recommended bike network comprises 22%
of all Seattle Streets (20% of arterial street
segments and 22% of non-arterial street
segments).
It is important to note the plan states that,

while all efforts will be made to implement
the recommended bicycle network on arterial
multi-modal corridors, people riding bicycles
can more easily be accommodated on parallel
non-arterial streets than other modes. To this
end, the plan anticipated that, when the
planned bikeway is not feasible on arterial
streets, a neighborhood greenway may be
provided on a parallel street to create an “all
ages and ability” facility.
26
Transit Master Plan: Frequent Transit Network
The Transit Master Plan includes

Figure 9: Frequent Transit Network from Transit Master Plan
official maps guiding service and
capital investments. While the plan
pre-dates both the Sound Transit 3
(ST3) and Seattle Transit Benefit
District (STBD) referenda, the plan
remains the key policy guide for both
right-of-way and service investments
within the city. Within the TMP, the
Frequent Transit Network highlights
streets that are served by frequent
and very frequent transit service (as
of 2016) and where this service is
recommended to be expanded by
2030. Frequent transit service is
defined as all-day, 15-minute service,
while very frequent service is 10-
minutes or less. This network is
almost entirely on arterials. The vast
majority of the network is served by
buses, along with existing and future
streetcar and light rail routes.
In total, the Frequent Transit

Network comprises 13% of all Seattle
Streets (46% of arterial street
segments and 0% of non-arterial
street segments).
27
Freight Master Plan: Major Truck Street Network
The City’s freight network

Figure 10: Freight Network from the Freight Master Plan
consists primarily of Major and
Minor Truck Streets along with
limited access highways. The City
also has designated first/last mile
connectors, Heavy Haul network,
and an over-legal network.
Almost all the freight network is
on arterial streets. While
designating a street as part of the
freight network does not
necessarily change its overall
function, design or character, it
does underscore the importance
of ensuring goods movement can
be accommodated on that street
in a safe manner. In total, the
Freight Network comprises 9% of
all Seattle Streets (32% of arterial
street segments and 0% of non-
arterial street segments).
The networks within the FMP

focus on serving our
Manufacturing and Industrial
Centers (MICs), connecting MICs
to the regional freight network (I-
5 and state routes), and serving
urban centers and villages with
select priority routes to ensure
reliable, efficient goods delivery.
Since the adoption of the Freight
Master Plan, the freight and
urban goods landscape has
continued to change rapidly,
driven by the growth in e-
commerce and the COVID-19
pandemic. This has accelerated
the frequency of package
deliveries throughout the city and
increased the need for urban
goods delivery space at the curb.
28
Pedestrian Master Plan: Priority Investment Network
The Priority Investment Network (PIN)

Figure 11: Pedestrian Investment Network from the
prioritizes pedestrian network
Pedestrian Master Plan (Southeast Seattle Sector as
improvements—both along-the-roadway and
Example)
crossing-the-roadway—where people most
need to walk throughout the city. Along-the-
roadway pedestrian infrastructure speaks to
the need of accessible sidewalks with
adequate width and design (as defined by
Streets Illustrated). A key action outlined in
the Pedestrian Master Plan is to provide
sidewalks along all arterials to ensure there is
grade-separated sidewalks along the city’s
busiest streets. Crossing-the-roadway
pedestrian infrastructure focuses on reducing
crossing distances, properly designing the
spacing of controlled-crossings, and adequate
curb ramps. Each type of infrastructure has
implications on overall right-of-way allocation
and street operations.
The PIN is composed of streets that serve as

key pedestrian routes to schools and frequent
transit stops. These same streets also often
provide key connections to and within urban
centers and urban villages. About two-thirds
of the PIN is on residential streets and one-
third on arterials; together, these streets
create a clearly identified, interconnected
pedestrian network that links people to
important destinations. In total, the Priority
Investment Network comprises 52% of all
Seattle Streets (71% of arterial street
segments and 45% of non-arterial street
segments).
Streets Illustrated
Streets Illustrated, Seattle’s Right-of-Way Improvements Manual, is another tool used to deliver
complete streets. It establishes Street Type Standards that are based on the adjacent land uses, mobility
functions, and the envisioned character of the street. These design standards guide all right-of-way
improvements, including specific dimensional requirements for travel lanes, bicycle lanes, and
sidewalks.
29
Appendix B: Approach
To best understand the scope of challenges to integrate our modal plan network recommendations on
Seattle’s streets, we conducted a technical right-of-way (ROW) deficiency analysis of the modal plan
recommendations, interviewed city staff, and reviewed recent or ongoing projects within the project
development phase (0-30% design).
We shared and discussed key findings with the Policy & Operations Advisory Group (POAG) and SDOT
Core Team (a group of subject matter experts within SDOT) to inform the policy recommendations and
identification of implementing actions.
Engaging with the Policy & Operations Advisory Group

We convened the Policy & Operations Advisory Group (POAG) on a pilot basis in 2020 to serve as a
sounding board for policy development proposals, including analysis of trade-offs and potential
impacts. We solicited POAG members from 8 existing boards, commissions, and organizations through
an application process to lend their expertise to the policy and operations challenges at hand.
Figure 12: Policy & Operations Advisory Group Members

Board, Committee, or Commission Members
Bike Advisory Board Pierre Brunelle
Alexander Lew
Business Improvement Association (Ballard BIA) Mike Stewart
Freight Advisory Board Warren Aakervik
Geri Poor
Pedestrian Access Advisory Committee Dorene Cornwell
Steven Feher
Pedestrian Advisory Board Emily Mannetti
Anna Zivarts
Planning Commission David Goldberg
Grace Kim
Transit Advisory Board Erin Tighe
Bryce Kolton
Transportation Equity Workgroup Kiana Parker
Yordanos Teferi
The intended approach to the POAG meetings was to change the dynamic from one where individual
modal, equity, business and other stakeholders interact individually with SDOT related to a modal plan
or a specific project or location, to one where a balanced and comprehensive discussion could be held to
address citywide needs. We supported the POAG by providing briefings on relevant technical and policy
topics to build a shared knowledge foundation. Topics included our current policy base (Comprehensive
Plan, modal master plans, Streets Illustrated, and Complete Streets Ordinance) and multimodal traffic
operations and safety.
30
These meetings served as a new forum for our stakeholders to hear from and learn about each other’s
interests and concerns while providing guidance to us on right-of-way allocation decisions and how we
operate the transportation system. The POAG members shared their perspectives on policy
development and served as a liaison to their own boards, commissions, and organizations. To this end,
we did not seek POAG consensus, nor did members vote on any of the presented content or topics.
We held 6 meetings with the POAG between June 2020 and January 2021. Because of the COVID-19
pandemic, all meetings were conducted virtually. Based on the feedback received from POAG members,
there is value in this model for facilitating conversations about citywide policy needs that cut across
mode-specific concerns. SDOT will consider when and how to host this type of forum in the future to
support multimodal policy development; that said, there are no specific plans at this point to continue
the POAG.
Right-of-Way Deficiency Analysis: Where Are the Deficient Street Segments?

Our Complete Streets policy, modal master plans, and implementation approach require more street
space than what is available in certain locations. When it comes time to build projects that complete
these networks, this can lead to challenging conversations about trade-offs internally and with our
community members and stakeholders.
We conducted a deficiency analysis to understand where there is not enough right-of-way to

accommodate implementation of the modal priority networks. We compared the various modal plan
recommendations with existing right-of-way conditions and the street design standards included in the
City’s right-of-way improvement manual, Streets Illustrated (see Figure 13). Key findings from this
analysis are described in Appendix C and draft maps illustrating locations of deficient street segments
are compiled in Appendix D.
Figure 13: Inputs to the Right-of-Way Deficiency Analysis

Modal plan networks Existing right-of-way conditions Streets Illustrated standards
• Transit Master Plan: • Street segment • Travel and turn lanes
Frequent Transit Network channelization such as • Bicycle infrastructure
• Bicycle Master Plan: Future travel lanes, turn lanes, or • Parking and loading in the
bikeway recommendations bicycle lanes flex zone
by type (e.g., standard bike • Presence of parking and • Sidewalk clear zone and
lane, protected bike lane, loading functions in the flex furniture zone
multi-use trail) zone
• Freight Master Plan: Freight • Vehicle volumes
network • Bus passenger volumes
• Pedestrian Master Plan: • Sidewalk characteristics
Priority Investment
Network
Our analysis focused on Seattle’s arterial street network of 6,539 street segments, the focal point of
many priority modal network conflicts. Arterial streets are the classification where we see almost all our
right-of-way allocation challenges. Freight and Transit routes are almost always located on arterials.
31
Almost all standard and protected bike lanes are planned for arterials (with the remaining planned
bikeway network on non-arterial streets where right-of-way conflicts are uncommon).
This analysis looked at right-of-way available to install transit-only lanes, bike lanes and protected bike
lanes, as well as standard sidewalks. In most instances, right-of-way to deliver modal plan priorities
would come from potential repurposing of right-of-way presently used as general purpose travel lanes,
turn lanes, or flex zone. Occasionally, existing travel or turn lanes are larger than needed and “right
sizing” turn or travel or parking lanes would free up enough space to accommodate modal plan priorities
in this analysis.
The analysis also highlighted common modal conflicts and trade-offs project development and
implementation staff must navigate to reconcile demand where there are deficient segments. The
analysis highlights 3 broad categories of conditions/circumstances across the arterial street segments:
• Arterial street segments where all recommended modal plan elements (e.g., protected bike
lanes, bus-only lane, loading zones) would fit by right-sizing segments (e.g. reducing oversized
travel lanes or parking areas or repurposing underutilized travel or turn lanes).
• Segments where recommended modal elements would fit by repurposing flex lane space
currently used for curbside storage (e.g. long-term parking) or access (e.g. loading or drop off).
• Segments where no possible combination of recommended elements would fit due to the
recommendations exceeding available right-of-way
Given the expense and challenges related to moving the curb lines and drainage, this analysis looked
separately at right-of-way between the curbs and behind the curb line. Between the curbs, we evaluated
the potential to meet recommendations from the bicycle, transit, and freight modal plans. Behind the
curb line, between the curb (or edge of pavement where curbs do not exist) and property line, we
evaluated the potential to install compliant sidewalks. Figure 14 illustrates the types of elements found
between and behind the curb line and gives some of the typical dimensions found within Streets
Illustrated.
32
Figure 14: Example Street Cross Section and Dimensions from Streets Illustrated
Best Practice Research

We conducted best practice research and looked to other cities in the country and the world. As part of
this effort, we conducted interviews with planners who had been working on policies and practices to
created balanced networks in Amsterdam and Los Angeles and on modal priority (or policies that create
hierarchy for modal implementation) in Portland and San Francisco.
Based on our peer city research, Amsterdam’s “PlusNet” strategy was the most comprehensive and
integrated approach we found and had the most successful implementation. Their approach evaluated
all mobility options and created a clear order of priorities to divide the right-of-way space for
pedestrians, bicyclists, public transit, and cars and trucks. This strategy enables clearer choices for which
roads or streets different modes should use. It prioritizes different modes at different block scales both
for right-of-way allocation and signal operations. For example, pedestrians have a finer-grained network
with many smaller blocks prioritized for people walking, and vehicles—personal vehicles and
commercial trucks—have a coarser-grained network with people driving prioritized on larger arterials.
Racial Equity Analysis

We conducted a racial equity analysis to better understand and analyze impacts of a modal integration
policy framework on Black, Indigenous, and people of color communities, people with disabilities, and
other communities we have traditionally underserved. The City’s Race and Social Justice Initiative is
intended to deepen racial equity analysis, avoid unintended outcomes, and identify opportunities for
achieving equitable outcomes. Using a Racial Equity Toolkit (RET), we considered issues related to the
modal integration policy such as: who is impacted, including who benefits and who is burdened; what
we know on the topic based on stakeholder feedback and data available; and what the unintended
consequences may be of any policy changes.
33
Appendix C: Detailed Findings

We identified numerous themes based on information gathered through mapping modal networks,
analyzing data, engaging in conversations with internal and external stakeholders, and conducting a
racial equity analysis. Our findings presented here not only better define the problem at hand when it
comes to integrating our modal plan networks where there is insufficient right-of-way, but also describe
the complexity of what potential solutions look like and what factors should be considered in the
development of future policy. Our key findings, discussed in more detail in this section, are:
• Modal plans take distinct approaches with their respective networks.

• Modal plan networks mostly all fit together within existing right-of-way.
• Existing curb-to-curb width most frequently presents challenges to Bicycle Master Plan network
implementation.
• Implementing modal priorities may impact the flex zone and its priority access and loading
functions.
• Pedestrian safety, access, and convenience are key priorities that could impact curb-to-curb
priorities or require acquiring right-of-way.
• Improvement to modal planning processes and right-of-way allocation decisions can advance
racial equity.
• There is an opportunity to directly connect modal planning to the actions needed to meet
Seattle’s climate goals.
• Aligning signal operations with right-of-way allocation policy can further advance modal
integration.
• While many cities are interested in modal integration, few have completed an effective modal
integration policy or process.
• Thinking creatively about the future of modal planning will address its current shortcoming.
The findings serve as the basis for our recommendations and next steps, including near-term and longer-
term strategies for decision making related to modal integration and prioritization.
Modal Plans Take Distinct Approaches with Their Respective Networks

Each of the modal plans (freight, transit, bicycle, pedestrian) include mapped priority networks for each
mode; however, the priority networks take distinct approaches to their respective networks. Both the
freight and bicycle priority networks include tiered networks. The freight network includes Major and
Minor Truck Streets, along with First/Last Mile Connectors and Limited Access (e.g., highway) segments.
For bicycles, there is a Citywide Network complemented by Local Connectors; both components are
comprised of various facility types (protected bike lanes, neighborhood greenways, etc.). The Transit
Plan includes two networks. The Frequent Transit Network (FTN) focuses on service while the Priority
Investment Network focuses on capital. The Pedestrian Master Plan includes a single Priority Investment
Network (PIN).
A second key difference is the extent of the planned networks for the 4 modal plans. The freight
network comprises 9% of Seattle’s streets (arterials and non-arterials), while the transit and bicycle
networks comprise 13% and 22% respectively. The Priority Investment Network (PIN), stands out in that
it comprises 52% of all city streets. The PIN establishes our priority investment areas for standard
34
pedestrian infrastructure, but we are missing a pedestrian-oriented mapped network that prioritizes the
creation, improvement, and management of civic spaces, public spaces, and special areas in the right-of-
way. These areas are presently a limited outcome from special area studies and community-led efforts
and more attention is needed to develop an equity informed method for identifying and prioritizing
these across the city.
It is important to note that our current modal plan framework does not address all modes, such as cars,
autonomous vehicles, micro-mobility devices (e.g., e-scooters), and other forms of emerging mobility.
There is a need to address modes not included in the 4 current modal plans and networks (e.g., personal
vehicles). Stakeholders involved in the process believe it is critical to have clear policies for private
vehicles since a large share of our current street space is dedicated to their operation and storage, and
thus directly impact the feasibility of networks for the modes for which we plan.
Modal Plan Networks Mostly All Fit Together within Existing Right-of-Way
We evaluated over 6,500 arterial street segments to understand whether our streets’ existing curb-to-
curb dimensions are sufficient to accommodate planned modal networks that are recommended for
implementation in the curb-to-curb right-of-way—Bicycle Master Plan, Transit Master Plan, and/or
Freight Master Plan. For the purposes of this curb-to-curb analysis, we did not factor in the Pedestrian
Master Plan’s Pedestrian Investment Network, given its implementation in the pedestrian realm is
typically behind the curb line. A separate analysis looked at available right-of-way between the curb line
and the property line. Overall, we found that streets are largely able to accommodate the modal
networks (and meet dimensional design standards), even where there is planned modal overlap.
Of Seattle’s arterial street network (6,539 street segments), 81% is designated as part of a planned
modal network (Bicycle Master Plan, Transit Master Plan, and/or Freight Master Plan). In fact, 45% of all
arterial streets are designated for multiple modal networks. A total of 782 street segments (12% of all
arterial street segments) are designated for all three modal networks. Figure 15 below details the
breakdown of modal plan designation for Seattle’s arterial street network.
Figure 15: Distribution of Arterial Street Segments by Modal Plan Network

Number of Percent of
Modal Plan
Arterial Street Arterial Street
Network(s) Present
Segments Network
Street Segments with No Modal Networks 1,270 19%
Street Segments with 1 Modal Network Bicycle Master Plan 1,650 25%
Transit Master Plan 389 6%
Freight Master Plan 313 5%
Street Segments with 2 Modal Networks Bicycle Master Plan +
1,098 17%
Transit Master Plan
313 5%
Freight Master Plan
724 11%
Freight Master Plan
Street Segments with 3 Modal Networks Bicycle Master Plan +
782 12%
35
Freight Master Plan

Total 6,539 100%
We analyzed each of these street segments with modal plan networks (n = 5,269) to understand to what
degree the existing curb-to-curb dimension of the roadway would accommodate the planned networks.
Of these arterial street segments on modal plan networks, we found:
• 69% (n= 3,620) have sufficient right-of-way widths to accommodate the modal plan
recommendations while meeting design standards.
• 23% (n = 1,209) could accommodate the networks with the removal or a turn lane or flex
lane(s).
• 8% (n = 440) have right-of-way widths that are too narrow to accommodate designated modal
plan networks.
Figure 16 provides a detailed breakdown of how arterial streets are able to accommodate modal
networks based on network type present.
36
Figure 16: Ability for Arterial Street Segments to Accommodate Modal Networks Based on Designated
Network
Does not fit Fits with removal of turn or flex lane(s) Fits
Bicycle Master Plan Only 223 598 829
Transit Master Plan Only 389
Freight Master Plan Only 313

53 297 748
Transit Master Plan

4548 220
Freight Master Plan

1 722
Freight Master Plan

Transit Master Plan + 118 265 399
Freight Master Plan
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800

Number of Arterial Street Segments
Of the 440 deficient street segments, most are located outside of our urban centers and urban villages
on Neighborhood Corridor and Urban Center Connector streets. Almost half of the deficient street
segments do not have a flex zone, while the other half of street segments have a flex zone on at least 1
side of the street that, even if reallocated for the modal networks, would not be adequate to meet the
space needs for modal plan implementation. For draft maps illustrated our deficient street segments,
see Appendix D.
Existing Curb-to-Curb Width Most Frequently Presents Challenges to Bicycle Master Plan
Network Implementation
Projects to build out the Bicycle Master Plan network will come with the most trade-offs around other
uses of the right-of-way given roadway space constraints and the large existing presence of other modal
networks. Of the 440 deficient arterial street segments identified in our analysis, 439 include a planned
bike facility. Building bike facilities oftentimes requires creating new, separated facilities where they do
37
not currently exist, whereas most transit and freight facilities are using or replacing existing general
purpose travel lanes.
As Figure 17 shows, a substantial proportion of arterial street segments on the bike network can
currently accommodate major separation bike facilities (typically protected bike lanes) and minor
separation bike facilities (typically standard bike lanes) only if there are impacts to flex or turn lanes. In
fact, 1 in 5 street segments cannot fit the bike facility while retaining general traffic lanes, regardless of
type (major or minor separation). Only 13% of street segments planned to have minor separation
infrastructure and 45% of street segments with planned major separation infrastructure cleanly fit into
the street with no adjustment to existing flex or turn lanes.
Figure 17: Ability for Arterial Street Segments to Accommodate Planned Bike Facilities
Minor Separation 22% 24% 42% 13% Does not fit

Fits with removal of 2 flex or turn lanes
Fits with removal of 1 flex or turn lane
Major Separation 18% 9% 28% 45%
Fits
0% 20% 40% 60% 80% 100%
Of the 439 deficient street segments with planned bike facilities, a majority (66%) are located on streets
with either 1 or 2 lanes of traffic in total, making the prospect of reallocating these travel lanes for
modal plan implementation a particular challenge.
Several POAG members expressed concerns about moving bike facilities to parallel routes in the event
of insufficient right-of-way to accommodate the facility on the planned street segment. This approach
should be considered carefully, particularly when there are substantial impacts to people riding bikes in
terms of direct connections, steepness or route, or an overall compromise on the efficiency of the
network.
Implementing Modal Priorities May Impact the Flex Zone and Its Priority Access and
Loading Functions
In addition to tensions between our modal networks competing for limited right-of-way, our right-of-
way allocation decisions can have significant impacts on the other essential functions of the right-of-
way. Currently, there is inconsistency in identifying and finding solutions with community and
businesses who are impacted by changes to the flex zone.
Our right-of-way deficiency analysis identified locations where the flex zone will likely be impacted. Use
of flex lanes for essential functions (see Figure 4), such as critical building access, solid waste services,
on-demand passenger pick up/drop off, urban goods delivery, bus stops, and parking is common across
our modal networks. While Seattle’s Comprehensive Plan prioritizes “Modal Plan Priorities” over access
needs for people and commerce (see Figure 6), access functions are often essential. To fully implement
38
our modal plan recommendations, we will need to consider ways to identify, manage, and minimize
those impacts.
Many buildings throughout the city are solely dependent upon reliable access to a nearby curb to meet
the critical needs of their building. This is particularly true in parts of the city with older development
built under prior regulations for building loading docks or for buildings built before widespread
automobile use. SDOT’s Downtown Curbspace Study (2016) documented that most properties in the
Center City area no longer have sufficient rights-of-way to relocate curbside access nearby (down the
block or around the corner).
A majority of arterial street segments have ROW widths sufficient to accommodate priority modal
networks, and still maintain 1 or more flex lanes; however, many segments do not. For street segments
with flex lanes on 2 sides of the street, 25% could require some form of flex lane removal to
accommodate modal networks based on existing curb-to-curb dimensions, while only 16% of street
segments with 1 existing flex lane could require flex lane removal. See Figure 18 below for more details.
Figure 18: Proportion of Arterial Street Segments that could Require Flex Lane Removal
Share of Street Segments Requiring Flex
Lane Removal for Modal Plan
Number of Street Segments Implementation
1 Flex Lane 2 Flex Lanes

Street Segments 1,616
16% N/A
with 1 flex lane (25% of arterial street network)
Street Segments 3,454
17% 8%
with 2 flex lanes (53% of arterial street network)
Commerce has changed with urban goods delivery services focused on just-in-time delivery to
businesses and e-commerce driving an increase in direct delivery to consumers. This has especially been
the case with the COVID-19 pandemic where restaurants and retail businesses have relied at times
entirely on take out and pick up deliveries for their sales. Market and global trends create more
shipments (often with smaller vehicles for urban environments) and result in higher demand for delivery
and load/unload zones in street right-of-way. In addition to deliveries, other important building access
needs include mail service, solid waste/garbage, passenger drop off, and building maintenance.
The need for a dynamic and functional curb to accommodate essential right-of-way access functions
sometimes competes with our modal plan priorities. In fact, by not addressing the essential access
needs of businesses and consumers through street design that accommodates loading, there can be
negative effects on mobility, climate, and safety. We may want to explore a more nuanced approach to
prioritizing essential access needs during our next update of the Comprehensive Plan.
Where reasonable alternatives do not exist, it is common for delivery or passenger vehicles to inevitably
use inappropriate areas to fulfill essential access needs, as we have seen with bike lanes or turn lanes
being used for loading/unloading functions where reasonable alternatives do not exist. For this reason,
modal network projects that impact right-of-way allocation must take into account local access needs
and the role of the flex zone to meet these needs.
39
A few POAG members encouraged any new policy to make a clear distinction between—and not
conflate—parking and loading functions of the flex zone. While loading is seen as a more essential
function, SDOT should funnel that activity into specified zones (either on or off the arterial) that limit
impacts on mobility networks.
Pedestrian Safety, Access, and Convenience Are Key Priorities that Could Impact Curb-to-
Curb Priorities or Require Acquiring Right-of-Way
Both the POAG and internal SDOT stakeholders emphasized the need to prioritize pedestrian safety and
access. Separate from the curb-to-curb analysis to address ROW accommodation of bicycle, transit, and
freight networks, we analyzed sidewalk widths. To do this, we compared existing ROW available for
sidewalks (between the curb line and the property line) to the Streets Illustrated standards.
Of the 6,539 arterial block segments we analyzed, 384 are substantially deficient to meet sidewalk
infrastructure needs, defined as more than 3 feet short. Of these segments, 152 (40%) are located
within designated urban villages and urban centers. Remedies to garner the needed right-of-way are
limited to moving the curb line or acquiring additional right-of-way, and acquiring right-of-way is
especially difficult in our more urbanized villages and centers.
Members of the POAG were similarly interested in ensuring that any policy framework prioritizes
pedestrian safety and access throughout the city. Members also raised support for prioritizing universal
access in project design. From their perspective, SDOT should consistently apply the full Streets
Illustrated design standards for sidewalk design to prioritize universal access and strive to go beyond
simple compliance with the Americans with Disabilities Act.
Improvement to Modal Planning Processes and Right-of-Way Allocation Decisions Can

Advance Racial Equity
While each modal plan considered equity as a key criteria for developing preferred networks and
prioritizing investments, there are inherent gaps in this approach if the outcome sought is an equitable,
holistic transportation system. Each modal plan approached equity analysis differently by using
diverging definitions, measures, and datasets at the time of development. For each modal plan, we
undertook separate engagement efforts and focused on a certain mode of travel, rather than a
comprehensive look at what mobility needs and challenges exist in Black, Indigenous, and people of
color communities (BIPOC), regardless of mode.
Through the separate modal planning processes currently employed, we are not having conversations
about the integrated nature of the street or holistic community needs from land use, economic
development, transportation, and community well-being perspective during the modal planning
process. This presents an opportunity to plan our networks in an integrated way – one that realizes the
most equitable outcomes for marginalized communities, explores community needs comprehensively
and with nuance (e.g., comfort with travel in different modes, needs at different times of day,
affordability, accessibility), and aggressively mitigates climate change.
40
Additionally, there are other uses of the right-of-way that are not represented in the modal plans which
have not had comparable equity analysis (e.g., personal vehicles, micromobility) because they aren’t
represented in the modal plan framework. This is an important underlying assumption to be aware of,
because the use of cars has real impacts on climate change, equity, and livability.
For a few of the POAG members, the discussion related to improving climate outcomes with a focus on
universally reducing private vehicle use ultimately may be harmful to populations who have been
marginalized by the City. While car usage is relatively similar among different racial groups, there is a
need to recognize that not everyone has the same level of access to transportation alternatives that
enable a car-free or car-light lifestyle. Historic land use decisions (including red-lining) have segregated
communities and various BIPOC-serving businesses and community centers are often more car
dependent than transit friendly especially since the city is experiencing an affordability crisis. We also
must recognize that there are residents who need a personal vehicle because of a disability or as part of
their work. Without alternative infrastructure in place—transit in particular—that is convenient and
reliable, the impacts of shifts in modal priority could further compound existing inequities.
A more robust engagement process was suggested to ensure our plans and policies related to modal
integration and right-of-way allocation meet local community needs. With an eye toward equity,
communities that have been impacted by systemic racism and past and present practices should play a
role in the decision-making process.
There Is an Opportunity to Directly Connect Modal Planning to the Actions Needed to

Meet Seattle’s Climate Goals
Complete networks that provide safe, convenient, and affordable alternatives to driving alone are
essential to attracting more pedestrians, bicyclists, and transit riders. This mode shift is critical for the
City to reach its goals related to reducing greenhouse gas emissions in the transportation sector.
Integrated modal planning can provide a more comprehensive and cross-cutting approach across all
modes to reduce emissions and help keep climate action at the forefront in the decision-making
process.
One POAG member underscored the need to directly connect right-of-way allocation policies to City
mode shift and greenhouse gas emission reduction goals. Without a clear priority for right-of-way
decisions based on desired mode shift outcomes, POAG members were worried sustainable modes (e.g.,
walking, bikes, transit) may lose out when there is constrained right-of-way. One member suggested
adding an objective across the transportation network to guide right-of-way allocation and operational
decisions based on the vision that non-car modes are more convenient and reliable than drive-alone
travel.
POAG members also raised concerns that without a full accounting of how personal vehicles are
prioritized or de-prioritized in right-of-way allocation decisions or what their role is in our understanding
of “complete streets,” it will be challenging to make progress toward mode shift goals. Existing modal
plan policy frameworks attempt to address these issues by identifying priority networks to
accommodate and encourage mobility other than by personal vehicle. The modal planning approach,
however, does not directly address the role of personal vehicles more broadly nor establish methods to
41
capture the community impacts of single-occupancy vehicle use. The challenge lies in consistent
application of the modal priority policies and how that effort is communicated to the community.
Aligning Signal Operations with Right-of-Way Allocation Policy Can Further Advance
Modal Integration
Allocating space curb-to-curb is an important way to demonstrate modal priority on a street, and when
paired with signal operations, can facilitate priority movement for particular modes. In discussions with
the POAG and the SDOT Core Team, we heard that some of the tools traditionally used to measure the
success of our streets like motor vehicle level-of-service (LOS) are outdated and do not align with many
of the City’s climate or equity goals.
We have an opportunity to define clear policy guidance for signal operation measures and goals to
further benefit modal integration efforts. One way we can do this is by re-thinking when we use
vehicular LOS as a measurement of a successful street. Although vehicular LOS can describe potential
vehicle delays, we need to broaden the measurement tools we use to address all modes and meet our
goals. By providing policy for how to link measures and goals to our signal operations and curb-to-curb
space allocation, we can create a more straightforward approach with operational goals for project
planning and development. This operations guidance would build on the recently completed signal
policy guidance prepared with POAG input – to expand Leading Pedestrian Intervals, reduce overall
signal cycle lengths, and reduce the number of pedestrian actuated signals. The City of Amsterdam has
tied their signal operational goals with their street design. They are creating streets that are designed
and operated for priority modes within their priority networks (called “Plus Nets”, or plus networks).
The “Plus Nets” are defined corridors for each mode that are intended for movement through the city.
Each Plus Net type - whether it be for pedestrians, bicyclists, or transit – includes a specific operational
target for the priority mode.
While Many Cities Are Interested in Modal Integration, Few Have Completed an Effective
Modal Integration Policy or Process
As part of our best practices research for modal integration we contacted planners in Portland, Los
Angeles, San Francisco, and Amsterdam as well as reviewed documents from Chicago and Washington,
D.C. We found that, although many cities were interested in creating a policy for how to prioritize
modes, many cities had run into barriers implementing a set of policies that achieved the goal of
defining and delivering modal investments based on a policy, plan, or framework. Two cities that have
had some success harmonizing modal plans through policy are Los Angeles and Amsterdam.
Los Angeles integrated their free-standing modal plans into a single document and set of maps, and
integrated those maps within their Comprehensive Plan. They also reframed their complete streets
policy around “enhanced networks” for pedestrians, bicycles, transit, and motor vehicles. These
enhanced network designations clarify the priority in the right-of-way and provide guidance on the
types of improvements that optimize mobility within each network. Two modal take-aways from Los
Angeles are that pedestrians have priority both in districts and along corridors, and there is a vehicle
priority map that includes their freight network.
42
Amsterdam’s “Plus-Net” approach establishes premier networks for each mode. A secondary or tertiary
mode is often combined with the highest-priority mode. For example, the bike priority network could
also include segments that allow cars. These “fietstraats” are not unlike Seattle’s bicycle greenways but
they differ in that bicycles are the priority mode and cars are “guests”. These bike-priority streets
allowed car travel but at much lower speeds, and they must yield to bicycles. Like Los Angeles,
Amsterdam’s pedestrian priority includes both districts and corridors. Lastly, Amsterdam is the only city
we investigated that drew a clear connection between modal priority networks and signal operations.
Thinking Creatively about the Future of Modal Planning Will Address its Current
Shortcomings
SDOT staff discussed issues they face to fit all modes in a corridor. Feedback suggested that future
modal planning consider how modes successfully integrate and provide direction on when to change the
number of travel lanes for cars in a particular direction, transform streets from 2-way streets into 1-way
streets for vehicles, and consider if there are opportunities to acquire right-of-way to fit standard modal
facilities on a street.
POAG members expressed support for a new approach to planning transportation networks that steers
away from siloed planning efforts by mode. Benefits of a different approach that starts from the point of
understanding community mobility needs could be:
• networks that are scaled to meet our larger climate and equity goals.
• funding structures that are integrated and prioritized to ensure Complete Streets outcomes.
• ability to directly address the role of and externalities associated with the personal vehicle in our
networks.
Lastly, we found the Amsterdam “Plus-Net” model may be desirable to emulate, particularly for its
clarity around the integration of its modal networks with more fine-grained networks for pedestrians,
and larger networks for inter-city travel and automobiles, the design of each priority street and clear
connection between modal priority and signal operations.
43
Appendix D: Map Series of Overlapping Priority Networks and Locations

with Deficient Right-of-way
44
Curb-to-Curb Constraints
North Seattle RO
NE 145TH ST
OS
EV
EL
TW
AY
N
30TH AVE NE
1ST AVE NE
N 130TH ST
N 125TH ST
NE 125TH ST
E
AY N
DAYTON AVE N
YW
MERIDIAN AVE N
SAND
E C IT
POIN
GREENWOOD AVE N
LA K
NE NORTHGATE WAY
5TH AVE NE
NE 110TH ST
T WA
Dr
Y NE
N 105TH ST
NE
NW 100TH ST
E
AV
NW
A
NW 96TH ST RD
NN
N
MA
VE
L
HO
RA
28TH AVE NW
NE 95TH ST
3RD AVE NW
AURORA AVE N
15TH AVE NE
ROOS EV ELT WAY NE
35T H AVE NE
NW 85TH ST
BA
N
NW 80TH ST
NE
24TH AVE NW
AV E N W
LINDE N AV E N
NE 80TH ST
RW
20TH AVE NE
AY
15TH AVE NW
N E
32ND AVE NW
NE 75TH ST
V IE W
8TH AVE NW
SEA
N
AY NE 70TH ST
W
12TH AVE NE
40T H AVE NE
E
NW 65TH ST
K
N 65TH ST
LA
NE 65TH ST
N
EE
20TH AVE NW
GR
25TH AVE NE
LATONA AVE NE
NE
PHINNEY AVE N
ST
RAV
14TH AVE NW
EA
ENN
NW MARKET ST AB
LVD
17T H AVE NE
NE 55TH ST
47TH AVE NE
WC N 50TH ST NE 50TH ST
OM
MO
D OR
11T H AV E NE
EW NW 46TH ST N 46TH ST
AY N 45TH ST
NE 45TH ST
LE
BALLARD BR
FREMONT AVE N
aft GI
LM
AN
AR
YW
STONE WAY N
D NE
NE 41ST ST
WALLINGFORD AVE N
AY
AV
N
E
N 40TH ST
V
W
W EMERSON ST
KE BL
W
WE ST VIE WMONT WAY W
T
LA
34TH AVE W
MONT
W BE RT ONA ST
IC
CIF
N TH ST
W DRAVUS ST N 3435
N PA
TH ST
AURORA BR
22ND AVE W
3RD AVE W
28TH AVE W
32ND AVE W
15TH AVE W
E AS T LA KE AVE E
W
BO
M
10T H AV E W
VE
AG
W MCGRAW ST Y ER
EA
NO
BOSTON ST AV
43RD AVE E
LIA
YK
E
6TH AVE W
E
ND
10T H AVE E
BL
WESTLAKE AVE N
24T H AV E E
VD
OR
W
TH
MAGNOLIA BR
QUEEN ANNE AVE N
DE
TAYLOR AVE N
BLV
LA K
N
E
IE W
AV
EW
15TH AVE E
EL
V
LIO
AS
KE
IE
E ALOHA ST
DEXTER AVE N
RV
TT
LA
HI
ROY ST
I
NG
AV
FA
ST ON
12T H AV E E
19T H AV E E
E
T
23RD AVE E
N
W
BL
1ST AVE W
RE PUBLICAN ST SO
1ST AVE N
I VD
5TH AVE N
32ND AVE E
AD E
EM
4 7T DENNY WAY
H
2N TH A
EL
AV
LIO
AY
19TH AVE
D V E
ST
T AV E EW
AV
T
E PINE ST
O RT
E LIV
ST
E
A
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
E
8T VE
E UNION ST
6T
T ON BL
ST
NO
N AL
HA
T
HA
AS ES T
LE
12TH AVE
T
23RD AVE
KA PIN IKE S AS
VE
Arterial Streets with Constrained Pavement Width* N P EC

W N
A SH ING
AY SE
E CHERRY ST
W E
ST
9T
* The pink highlighted lines represent locations where the recommended G E JEFFERSON ST
BO
RIN ST
HA
LA KE W
modal facilities do not fit within the existing curb-to-curb area based on SP RION ST
RE
ES
VE
MA
N
dimensional design standards per Streets Illustrated. Recent and ongoing

JAM
AV
capital projects were not included in this analysis. S

YESLER WAY
E
E YESLER WAY
For use with the Complete Streets Policy and Checklist
www.seattle.gov/transportation/projects-and-programs/programs/ S JACKSON ST ©2021, THE CITY OF SEATTLE. All rights reserved.
1ST AVE S
urban-design-program/complete-streets-in-seattle Produced by the Seattle Department of Transportation.

0 0.25 0.5 0.75 1 No warranties of any sort, including accuracy, fitness or
Miles merchantability, accompany this product.
M
EAS T LA KE AV E E
AG
W MCGRAW ST BO
10T H AVE W
N
BOSTON ST Y ER
OL
43RD AVE E
AV
IA
6TH AVE W
E
BL
10T H AVE E
E
VD
24TH AVE E
W
MAGNOLIA BR
QUEEN ANNE AVE N
TAYLOR AVE N
LA K
N
E
AV
EW
15TH AVE E
EL
W
L
AS
IE
IO
E ALOHA ST
RV
TT
HI
ROY ST
NG
AV
FA
3RD AVE W
MERCER ST ST ON
19T H AV E E
5TH AVE N
E
12T H AV E E
T
23RD AVE E
ON
W
BL
1ST AVE W
REPUBLICAN ST
1ST AVE N
S VD
DI
32ND AVE E
A E
BROADWAY
EM
3R 7T DENNY WAY
H
EL
D AV
AV
LIO
WAY
19TH AVE
1S E
ST
T
AV T A E E
T
E PINE ST
O RT
VE LIV
ST
E
A
Curb-to-Curb Constraints
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
E
8T
E UNION ST
ST
T ON BL
NO
AL T ST
HA
AS ES CA
LE
12TH AVE
23RD AVE
KA PIN E ST ST NE ST
VE
N I K S E
South Seattle W P N N
A SH ING
AY UNIO ISO
AD E CHERRY ST
ST M
9T
G
Dr RIN
BO
T E JEFFERSON ST
HA
SP ION S
LA KE W
ST
RE
ES
VE
R
MA
N
JAM
AV
YESLER WAY
E
E YESLER WAY
5TH AVE S
S JACKSON ST
31ST AV E S
20TH AVE S
SIDE AVE S
S DEARBORN ST
LAKE
14T H AV E S
ESW
S HOLGAT E ST
AV
KI
AL
S COLLEGE ST
SW AD MIRA L WAY
23RD AV E S
S LANDER ST
1ST AVE S
HA RB
6TH AVE S
S MCCLELLAN ST
4TH AVE S
49T H AVE SW
OR
AVE S W
E AS T MA RG INA L WAY S
WE ST SE AT T LE BR S SPOKANE ST
Y
WA
15TH AVE S
38T H AV E S
A IRP ORT WAY S
WES
ON
AL
T MA
AV
SW GENESEE ST
LA
SW
KE
RG INA L
S GENESEE ST
50TH AVE S
WA
SW ALASKA ST CO
S
S HI
LU Y S ALASKA ST
M B I A N WA
aft
BE
WAY SW
NG
ACH
T ON
CALIFORNIA AVE SW
DR
BLVD
SW
DELRIDGE WAY SW
S
S LUCILE ST
ML
W
IL S
S ORCAS ST
KING
ON
48T H AVE SW
AV
S
PL
JR W
E
BEACO
N AVE
RO
S
LB S GRAHAM ST
AY S
SW MORGAN ST SA
SW
O
N
CORS
IFT
AVE S
AVE S
SY
AV
LV
AN
E
ELLIS
S
W
16TH AVE SW
AY
35TH AVE SW
SW
S EWARD PA RK AV E S
S OT HELLO ST
SW HOLDEN ST
FAUNTLEROY WAY SW
RAINIER AVE S
9TH AVE SW
SW THISTLE ST
S CLOVERDALE ST
SW TRENTON ST
S HENDERSON ST
8TH AVE S
SW BARTON ST
SW ROXBURY ST
W
M ARINE VI
AT
ERS
SW 100TH ST
RE
NT
AV
ON
E
62ND AVE S
51ST AVE S
S
AV
EW D
E S
SW 106TH ST
RS
W
N
S BANGOR ST
Arterial Streets with Constrained Pavement Width*
W E * The pink highlighted lines represent locations where the recommended

modal facilities do not fit within the existing curb-to-curb area based on
dimensional design standards per Streets Illustrated. Recent and ongoing
capital projects were not included in this analysis.
S
For use with the Complete Streets Policy and Checklist ©2021, THE CITY OF SEATTLE. All rights reserved.
www.seattle.gov/transportation/projects-and-programs/ Produced by the Seattle Department of Transportation.
0 0.25 0.5 0.75 1 programs/urban-design-program/complete-streets-in-seattle
Miles No warranties of any sort, including accuracy, fitness or
merchantability, accompany this product.
Curb-to-Property Line
Constraints N 145TH ST
RO
NE 145TH ST
North Seattle
OS
E VE
LT
WA
YN
30TH AVE NE
N 130TH ST
N 125TH ST
NE 125TH ST
E
AY N
DAYTON AVE N
YW
MERIDIAN AVE N
SAND
N 115TH ST
E C IT
POIN
GREENWOOD AVE N
LA K
NE NORTHGATE WAY
5TH AVE NE
NE 110TH ST
T WA
Y NE
N 105TH ST
NE
Dr
NW 100TH ST
E
AV
NW
A
NW 96TH ST RD
NN
N
MA
VE
L
HO
RA
28TH AVE NW
NE 95TH ST
3RD AVE NW
AURORA AVE N
15TH AVE NE
ROOS EV ELT WAY NE
35T H AVE NE
NW 85TH ST
BA
N NE
N 80TH ST
24TH AVE NW
AV E N W
LINDE N AV E N
RW
20TH AVE NE
AY
15TH AVE NW
N E
32ND AVE NW
NE 75TH ST
V IE W
8TH AVE NW
SEA
N
AY NE 70TH ST
W
12TH AVE NE
40T H AVE NE
E
NW 65TH ST
K
N 65TH ST
LA
NE 65TH ST
N
EE
20TH AVE NW
GR
25TH AVE NE
LATONA AVE NE
NE
PHINNEY AVE N
ST
RAV
14TH AVE NW
EA
ENN
NW MARKET ST AB
LVD
17T H AVE NE
NE 55TH ST
47TH AVE NE
WC N 50TH ST
OM
MO
D OR
11T H AV E NE
UNIVERSITY WAY NE
AY N 45TH ST
NE 45TH ST
LE
BALLARD BR
FREMONT AVE N
GI
AR
LM
YW
STONE WAY N
AN
D NE
NE 41ST ST
WALLINGFORD AVE N
AY
AV
aft E
N 40TH ST
V
W
W EMERSON ST
KE BL
W
T
LA
34TH AVE W
MONT
W BE RT ONA ST
IC
CIF
W DRAVUS ST N 34T
N PA
AURORA BR
H ST
22ND AVE W
3RD AVE W
28TH AVE W
32ND AVE W
15TH AVE W
E AS T LA KE AVE E
W
BO
M
10T H AV E W
VE
AG
W MCGRAW ST Y ER
EA
NO
BOSTON ST AV
43RD AVE E
LIA
YK
E
6TH AVE W
E
ND
10T H AVE E
BL
WESTLAKE AVE N
24T H AV E E
VD
OR
W
TH
MAGNOLIA BR
QUEEN ANNE AVE N
DE
TAYLOR AVE N
BLV
LA K
N
E
IE W
AV
EW
15TH AVE E
EL
V
LIO
AS
KE
IE
E ALOHA ST
DEXTER AVE N
RV
TT
LA
HI
ROY ST
I
NG
AV
FA
ST ON
12T H AV E E
19T H AV E E
E
T
23RD AVE E
N
W
BL
1ST AVE W
RE PUBLICAN ST SO
1ST AVE N
I VD
5TH AVE N
32ND AVE E
AD E
EM
DENNY WAY
EL
LIO
Y
19TH AVE
T
T
VE E PINE ST
E PIKE ST
VD
34TH AVE
M L KING JR WAY
14TH AVE
E UNION ST
T ON BL
Insufficient curb to property line width*

12TH AVE
23RD AVE
N
A SH ING
* The teal highlighted lines represent locations where the recommended

pedestrianfacilities do not fit within the existing curb-to-property line E CHERRY ST
area based on dimensional design standards per Streets Illustrated. E JEFFERSON ST
BO
W E
LA KE W
Recent and ongoing capital projects were not included within this analysis.
RE
N

AV
S
E
www.seattle.gov/transportation/projects-and-programs/programs/
urban-design-program/complete-streets-in-seattle
S JACKSON ST
23RD AVE S
31ST AVE S
©2021, THE CITY OF SEATTLE. All rights reserved.

0 0.25 0.5 0.75 1 Produced by the Seattle Department of Transportation.
No warranties of any sort, including accuracy, fitness or
Miles
W
28TH AVE W
M
EAS T LA KE AV E E
AG
15TH AVE W
W MCGRAW ST
VE
BO
10T H AVE W
WE
N
Y
EA
BOSTON ST ER
OL
43RD AVE E
AV
ST LAKE AVE N
IA
6TH AVE W
YK
E
BL
10T H AVE E
E
ND
VD
24TH AVE E
OR
W
MAGNOLIA BR
TH
QUEEN ANNE AVE N
TAYLOR AVE N
DEXTER AVE N
LA K
N
E
AV
EW
15TH AVE E
EL
W
L
AS
IE
IO
E ALOHA ST
RV
TT
HI
ROY ST
NG
AV
FA
3RD AVE W
ST ON
12T H AV E E
MERCER ST
19T H AV E E
5TH AVE N
E
T
23RD AVE E
ON
W
BL
1ST AVE W
REPUBLICAN ST
1ST AVE N
S VD
DI
32ND AVE E
A E
EM
3R 7T DENNY WAY
H
EL
D AV
AV
LIO
WAY
19TH AVE
1S E
ST
T
AV T A E E
T
E PINE ST
O RT
VE LIV
ST
E
Curb-to-Property Line
A
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
E
8T
E UNION ST
ST
T ON BL
NO
AL T ST
HA
AS ES CA
LE
12TH AVE
Dr
23RD AVE
VE
Constraints
N I K S E
W P N N
A SH ING
AY UNIO ISO
AD E CHERRY ST
ST M
9T
G
RIN E JEFFERSON ST
BO
T
HA
SP ION S
South Seattle
LA KE W
ST
RE
ES
VE
R
MA
N
JAM
AV
YESLER WAY
E
E YESLER WAY
A LA S KA N WAY S
5TH AVE S
S JACKSON ST
31ST AV E S
20TH AVE S
SIDE AVE S
S DEARBORN ST
LAKE
14T H AV E S
E SW
S HOLGAT E ST
AV
KI
AL
S COLLEGE ST
SW AD MIRA L WAY
23RD AV E S
S LANDER ST
1ST AVE S
HA RB
6TH AVE S
S MCCLELLAN ST
4TH AVE S
49T H AVE SW
OR
AVE S W
Y
WA
15TH AVE S
38T H AV E S
A IRP ORT WAY S
WES
ON
AL
T MA
AV
SW GENESEE ST
LA
SW
aft
KE
RG INA L
S GENESEE ST
50TH AVE S
WA
SW ALASKA ST CO
S
S HI
LU Y S ALASKA ST
M B I A N WA
BE
WAY SW
NG
ACH
T ON
CALIFORNIA AVE SW
DR
BLVD
SW
DELRIDGE WAY SW
S
S LUCILE ST
ML
W
IL S
S ORCAS ST
KING
ON
48T H AVE SW
AV
S
PL
JR W
E
BEACO
N AVE
RO
S
LB S GRAHAM ST
AY S
SW MORGAN ST SA
SW
O
N
CORS
1S T AV S BR
IFT
AVE S
AVE S
SY
AV
LV
AN
E
ELLIS
S
W
16TH AVE SW
AY
35TH AVE SW
SW
S OT HELLO ST
SW HOLDEN ST
FAUNTLEROY WAY SW
RAINIER AVE S
9TH AVE SW
SW THISTLE ST
S CLOVERDALE ST
SW TRENTON ST
S HENDERSON ST
8TH AVE S
SW BARTON ST
MYE
R
SW ROXBURY ST
S WA
W
AT
YS
ERS
SW 100TH ST
RE
NT
AV
ON
E
62ND AVE S
51ST AVE S
S
AV
N
E S
SW 106TH ST Insufficient curb to property line width*

W E
* The teal highlighted lines represent locations where the recommended S BANGOR ST
pedestrianfacilities do not fit within the existing curb-to-property line
S
area based on dimensional design standards per Streets Illustrated.
Recent and ongoing capital projects were not included within this analysis.
0 0.25 0.5 0.75 1 For use with the Complete Streets Policy and Checklist
www.seattle.gov/transportation/projects-and-programs/
Miles programs/urban-design-program/complete-streets-in-seattle
Produced by the Seattle Department of Transportation.
Bicycle, Transit and Freight Plan Networks
North Seattle
N 145TH ST
1ST AVE NE
30TH AVE NE
N 130TH ST
N 125TH ST
NE 125TH ST
GREENWOOD AVE N
E
AY N
YW
MERIDIAN AVE N
SAND
C IT
Dr
E
POIN
LA K
NE NORTHGATE WAY
5TH AVE NE
NE 110TH ST
T WA
Y NE
N 105TH ST
NW 100TH ST
NW
N RD
LMA
HO
3RD AVE NW
AURORA AVE N N 92ND ST
15TH AVE NE
N 90TH ST
ROOS EV ELT WAY NE
35T H AVE NE
NW 85TH ST
BA
N NE
AV E N W
N 80TH ST
LINDE N AV E N
RW
20TH AVE NE
AY
15TH AVE NW
N
24TH AVE NW
E
32ND AVE NW
NE 75TH ST
V IE W
8TH AVE NW
SEA
N
AY
W
E
NW 65TH ST
K
LA
NE 65TH ST
N
EE
20TH AVE NW
GR
25TH AVE NE
LATONA AVE NE
NE
PHINNEY AVE N
ST
RAV
14TH AVE NW
EA
ENN
NW MARKET ST BLV
D
NE 55TH ST
WC N 50TH ST
aft
OM
MO
D OR
11T H AV E NE
EW NW 46TH ST
AY N 45TH ST
LE
BALLARD BR
FREMONT AVE N
GI
AR
LM
YW
STONE WAY N
AN
NE 41ST ST
WALLINGFORD AVE N
AY
AV
D
N
E
N 40TH ST
V
W
W EMERSON ST
KE BL
W
T
LA
S
MONT
W BE RT ONA ST
IC
CIF
N TH ST
W DRAVUS ST N 3435
N PA
TH ST
AURORA BR
22ND AVE W
3RD AVE W
32ND AVE W
15TH AVE W
E AS T LA KE AVE E
W
BO
M
10T H AV E W
VE
AG
W MCGRAW ST Y ER
EA
NO
BOSTON ST AV
LIA
YK
E
6TH AVE W
E
ND
10T H AVE E
BL
24T H AV E E
VD
OR
W
TH
MAGNOLIA BR
QUEEN ANNE AVE N
TAYLOR AVE N
LA K
N
E
AV
EW
15TH AVE E
EL
W
LIO
AS
IE
E ALOHA ST
RV
TT
HI
ROY ST
I
NG
AV
FA
ST ON
12T H AV E E
19T H AV E E
E
T
23RD AVE E
N
W
BL
I SO VD
5TH AVE N
32ND AVE E
AD E
EM
Arterial Streets Designated in the Bicycle Master Plan (BMP)
4 7T DENNY WAY
Arterial Streets Designated in the Freight Master Plan (FMP) H
2N TH A
EL
AV
LIO
T D V E E
Arterial Streets Designated in the Transit Master Plan (TMP) AV AV
T
E E
E PIKE ST
VD
34TH AVE
Arterial Streets Designated in the BMP and FMP

T ON BL
N
Arterial Streets Designated in the BMP and TMP
A SH ING
Arterial Streets Designated in the FMP and TMP

W E
Arterial Streets Designated in the BMP, FMP and TMP
LA KE W
Multi-use trails along arterial streets were not included in this analysis. S
For use with the Complete Streets Policy and Checklist ©2021, THE CITY OF SEATTLE. All rights reserved.
www.seattle.gov/transportation/projects-and-programs/programs/urban-design-program/complete-streets-in-seattle
0 0.25 0.5 0.75 1 No warranties of any sort, including accuracy, fitness or
Miles merchantability, accompany this product.
W
28TH AVE W
M
A U RO
EAS T LA KE AV E E
AG
15TH AVE W
W MCGRAW ST
VE
BO
10T H AVE W
WE
N
Y
EA
BOSTON ST ER
OL
43RD AVE E
RA A
AV
ST LAKE AVE N
IA
6TH AVE W
YK
E
BL
10T H AVE E
E
ND
VD
VE N
24TH AVE E
OR
W
MAGNOLIA BR
TH
QUEEN ANNE AVE N
DE
TAYLOR AVE N
DEXTER AVE N
BLV
LA K
N
E
IE W
AV
EW
15TH AVE E
EL
V
L
AS
KE
IE
IO
E ALOHA ST
RV
TT
LA
HI
ROY ST
NG
AV
FA
3RD AVE W
MERCER ST ST ON
Bicycle, Transit and
19T H AV E E
5TH AVE N
E
12T H AV E E
T
23RD AVE E
ON
W
BL
1ST AVE W
REPUBLICAN ST
1ST AVE N
S VD
DI
32ND AVE E
A E
BROADWAY
EM
Freight Plan Networks 3R 7T

H
DENNY WAY
EL
D AV
AV
South Seattle
LIO
WAY
19TH AVE
1S E
ST
T
AV T A E E
T
E PINE ST
O RT
VE LIV
ST
E
A
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
E
8T
E UNION ST
ST
T ON BL
NO
AL T ST
HA
AS ES CA
LE
12TH AVE
23RD AVE
VE
N I K S E
W P N N
A SH ING
AY UNIO ISO
AD E CHERRY ST
ST M
9T
G
RIN
BO
T E JEFFERSON ST
HA
SP ION S
LA KE W
ST
RE
ES
VE
R
Dr
MA
N
JAM
AV
YESLER WAY
E
E YESLER WAY
5TH AVE S
S JACKSON ST
31ST AV E S
20TH AVE S
SIDE AVE S
S DEARBORN ST
LAKE
14T H AV E S
ESW
S HOLGAT E ST
AV
KI
AL
S COLLEGE ST
SW AD MIRA L WAY
23RD AV E S
S LANDER ST
1ST AVE S
HA RB
6TH AVE S
S MCCLELLAN ST
4TH AVE S
49T H AVE SW
OR
AVE S W
Y
WA
15TH AVE S
38T H AV E S
A IRP ORT WAY S
WES
ON
AL
T MA
AV
SW GENESEE ST
LA
SW
KE
RG INA L
S GENESEE ST
50TH AVE S
WA
SW ALASKA ST CO
S
S HI
LU Y S ALASKA ST
M B I A N WA
BE
WAY SW
NG
ACH
T ON
aft DR
CALIFORNIA AVE SW
BLVD
SW
DELRIDGE WAY SW
S
S LUCILE ST
ML
W
IL S
S ORCAS ST
KING
ON
48T H AVE SW
AV
S
PL
JR W
E
BEACO
N AVE
RO
S
LB S GRAHAM ST
AY S
SW MORGAN ST SA
SW
O
N
CORS
IFT
AVE S
AVE S
SY
AV
LV
AN
E
ELLIS
S
W
16TH AVE SW
AY
35TH AVE SW
SW
S OT HELLO ST
SW HOLDEN ST
FAUNTLEROY WAY SW
RAINIER AVE S
9TH AVE SW
SW THISTLE ST
S CLOVERDALE ST
SW TRENTON ST
S HENDERSON ST
8TH AVE S
SW BARTON ST
MYE
R
SW ROXBURY ST
S WA
SR50
W
M ARINE VI
AT
YS
E
9 SB
RS
SW 100TH ST
RE
NT
AV
ON
E
62ND AVE S
51ST AVE S
S
AV
EW D
Arterial Streets Designated in the Bicycle Master Plan (BMP)

E S
SW 106TH ST Arterial Streets Designated in the Freight Master Plan (FMP)

RS
W
N Arterial Streets Designated in the Transit Master Plan (TMP)

S BANGOR ST
Arterial Streets Designated in the BMP and FMP
W E Arterial Streets Designated in the BMP and TMP

Arterial Streets Designated in the FMP and TMP
S
Arterial Streets Designated in the BMP, FMP and TMP
Multi-use trails along arterial streets were not included in this analysis. Produced by the Seattle Department of Transportation.
0 0.25 0.5 0.75 1
Miles No warranties of any sort, including accuracy, fitness or
For use with the Complete Streets Policy and Checklist merchantability, accompany this product.
www.seattle.gov/transportation/projects-and-programs/programs/urban-design-program/complete-streets-in-seattle
Pedestrian Priority
Investment Network N 145TH ST
RO
OS
NE 145TH ST
E VE
North Seattle LT
WA
YN
30TH AVE NE
1ST AVE NE
N 130TH ST
N 125TH ST
NE 125TH ST
E
AY N
DAYTON AVE N
YW
MERIDIAN AVE N
SAND
N 115TH ST
E C IT
POIN
GREENWOOD AVE N
LA K
NE NORTHGATE WAY
5TH AVE NE
NE 110TH ST
T WA
Dr
Y NE
N 105TH ST
NE
NW 100TH ST
E
AV
NW
A
NW 96TH ST RD
NN
N
MA
VE
L
HO
RA
28TH AVE NW
NE 95TH ST
3RD AVE NW
AURORA AVE N N 92ND ST
15TH AVE NE
N 90TH ST
ROOS EV ELT WAY NE
35T H AVE NE
NW 85TH ST N 85TH ST
BA
N
NW 80TH ST
NE
N 80TH ST
24TH AVE NW
AV E N W
LINDE N AV E N
NE 80TH ST
RW
20TH AVE NE
AY
15TH AVE NW
N E
22
5
32ND AVE NW
NE 75TH ST
V IE W
SR
8TH AVE NW
SEA
N
AY NE 70TH ST
W
12TH AVE NE
8T H AVE NE
40T H AVE NE
E
NW 65TH ST
K
N 65TH ST
LA
NE 65TH ST
N
EE
20TH AVE NW
GR
25TH AVE NE
LATONA AVE NE
NE
PHINNEY AVE N
ST
RAV
14TH AVE NW
EA
ENN
NW MARKET ST AB
LVD
17T H AVE NE
NE 55TH ST
47TH AVE NE
WC N 50TH ST NE 50TH ST
OM
MO
D OR
11T H AV E NE
UNIVERSITY WAY NE
7T H AVE NE
AY N 45TH ST
NE 45TH ST
LE
BALLARD BR
FREMONT AVE N
aft GI
LM
AN
AR
YW
STONE WAY N
D NE
NE 41ST ST
WALLINGFORD AVE N
AY
AV
N
E
N 40TH ST
V
W
W EMERSON ST
KE BL
W
T
LA
34TH AVE W
MONT
W BE RT ONA ST
IC
CIF
N TH ST
W DRAVUS ST N 3435
N PA
TH ST
AURORA BR
22ND AVE W
3RD AVE W
28TH AVE W
32ND AVE W
15TH AVE W
E AS T LA KE AVE E
W
BO
M
10T H AV E W
VE
AG
W MCGRAW ST Y ER
EA
NO
BOSTON ST AV
43RD AVE E
LIA
YK
E
6TH AVE W
E
ND
10T H AVE E
BL
WESTLAKE AVE N
24T H AV E E
VD
OR
W
TH
MAGNOLIA BR
QUEEN ANNE AVE N
DE
TAYLOR AVE N
BLV
LA K
N
E
IE W
AV
EW
15TH AVE E
EL
V
LIO
AS
KE
IE
E ALOHA ST
DEXTER AVE N
RV
TT
LA
HI
ROY ST
I
NG
AV
FA
ST ON
12T H AV E E
19T H AV E E
E
T
23RD AVE E
N
W
BL
1ST AVE W
RE PUBLICAN ST SO
1ST AVE N
I VD
5TH AVE N
32ND AVE E
AD E
EM
4 7T DENNY WAY
H
2N TH A
EL
AV
LIO
AY
19TH AVE
D V E
ST
T AV E EW
AV
T
Pedestrian Priority Investment Network E PINE ST

O RT
E LIV
ST
E
A
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
(Arterials Only)
E
8T VE
E UNION ST
6T
T ON BL
ST
NO
AL
HA
T
HA
AS ES T
LE
12TH AVE
ST
23RD AVE
KA PIN IKE S
VE
N CA N ST
W P NE
A SH ING
For use with the Complete Streets Policy and Checklist AY SE DISO
A E CHERRY ST
www.seattle.gov/transportation/projects-and-programs/programs/ ST M
9T
ING ST E JEFFERSON ST
BO
HA
urban-design-program/complete-streets-in-seattle R
LA KE W
SP RION ST
RE
ES
VE
MA
N
JAM
AV
N
YESLER WAY
E
E YESLER WAY
S JACKSON ST
6TH AVE S
23RD AVE S
1ST AVE S
31ST AVE S
W E
4T H AV E S
0 0.25 0.5 0.75 1 Produced by the Seattle Department of Transportation.

S DEARBORN ST No warranties of any sort, including accuracy, fitness or
Miles S
W
28TH AVE W
M
EAS T LA KE AV E E
AG
15TH AVE W
W MCGRAW ST
VE
BO
10T H AVE W
WE
N
Y
EA
BOSTON ST ER
OL
43RD AVE E
AV
ST LAKE AVE N
IA
6TH AVE W
YK
E
BL
10T H AVE E
E
ND
VD
24TH AVE E
OR
W
MAGNOLIA BR
TH
QUEEN ANNE AVE N
TAYLOR AVE N
DEXTER AVE N
LA K
N
E
AV
EW
15TH AVE E
EL
W
L
AS
IE
IO
E ALOHA ST
RV
TT
HI
ROY ST
NG
AV
FA
3RD AVE W
ST ON
12T H AV E E
MERCER ST
19T H AV E E
5TH AVE N
E
T
23RD AVE E
ON
W
BL
1ST AVE W
REPUBLICAN ST
1ST AVE N
S VD
DI
32ND AVE E
A E
EM
7T DENNY WAY
Pedestrian Priority
3R H
EL
D AV
AV
LIO
WAY
19TH AVE
1S E
ST
T
AV T A E E
T
E PINE ST
O RT
VE LIV
Investment Network
ST
E
A
E PIKE ST
VD
W
34TH AVE
M L KING JR WAY
RA
14TH AVE
E
8T
E UNION ST
ST
T ON BL
NO
AL T ST
HA
AS ES CA
LE
12TH AVE
23RD AVE
VE
N I K S E
P N N
South Seattle
W
A SH ING
AY UNIO ISO
AD E CHERRY ST
ST M
9T
G
RIN E JEFFERSON ST
BO
T
HA
SP ION S
LA KE W
ST
RE
ES
VE
R
MA
N
JAM
AV
YESLER WAY
E
Dr
E YESLER WAY
A LA S KA N WAY S
5TH AVE S
S JACKSON ST
31ST AV E S
20TH AVE S
SIDE AVE S
S DEARBORN ST
LAKE
14T H AV E S
E SW
S HOLGAT E ST
AV
KI
AL
S COLLEGE ST
SW AD MIRA L WAY
23RD AV E S
S LANDER ST
1ST AVE S
HA RB
6TH AVE S
S MCCLELLAN ST
4TH AVE S
49T H AVE SW
OR
AVE S W
Y
WA
15TH AVE S
38T H AV E S
A IRP ORT WAY S
WES
ON
AL
T MA
AV
SW GENESEE ST
LA
SW
KE
RG INA L
S GENESEE ST
50TH AVE S
WA
SW ALASKA ST CO
S
S HI
LU Y S ALASKA ST
M B I A N WA
BE
WAY SW
NG
ACH
T ON
CALIFORNIA AVE SW
DR
BLVD
aft SW
DELRIDGE WAY SW
S
S LUCILE ST
ML
W
IL S
S ORCAS ST
KING
ON
48T H AVE SW
AV
S
PL
JR W
E
BEACO
N AVE
RO
S
LB S GRAHAM ST
AY S
SW MORGAN ST SA
SW
O
N
CORS
1S T AV S BR
IFT
AVE S
AVE S
SY
AV
LV
AN
E
ELLIS
S
W
16TH AVE SW
AY
35TH AVE SW
SW
S OT HELLO ST
SW HOLDEN ST
FAUNTLEROY WAY SW
RAINIER AVE S
9TH AVE SW
SW THISTLE ST
S CLOVERDALE ST
SW TRENTON ST
S HENDERSON ST
8TH AVE S
SW BARTON ST
MYE
R
SW ROXBURY ST
S WA
W
M ARINE VI
AT
YS
ERS
SW 100TH ST
RE
NT
AV
ON
E
62ND AVE S
51ST AVE S
S
AV
EW D
N
E S
SW 106TH ST
RS
Pedestrian Priority Investment Network

W
W E
(Arterials Only) S BANGOR ST

S

www.seattle.gov/transportation/projects-and-programs/programs/
urban-design-program/complete-streets-in-seattle
0 0.25 0.5 0.75 1
Miles

City of Seattle - Draft Modal Integration Policy White Paper With Full Appendices

Uploaded by

Copyright:

Available Formats

City of Seattle - Draft Modal Integration Policy White Paper With Full Appendices

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

City of Seattle - Draft Modal Integration Policy White Paper With Full Appendices

Uploaded by

Copyright:

Available Formats

updated July 1, 2021

About the Seattle Department of Transportation

Vision & Mission

Values & Goals

Existing Policy Framework

A longer, more in-depth discussion of findings can be found in Appendix C.

Right-of-Way Allocation Decisions Require Careful Consideration of Trade-Offs

Bicycle Master Plan Only 223 598 829

Transit Master Plan Only 389

Freight Master Plan Only 313

Bicycle Master Plan +

Bicycle Master Plan + 45

Transit Master Plan +

Bicycle Master Plan +

0 200 400 600 800 1,000 1,200 1,400 1,600 1,800

Future Modal Planning Should Holistically Address Mobility Needs

Policy Framework to Support Modal Integration

Within Urban Centers and Urban Villages

Considerations as we apply this policy:

Outside Urban Centers, Urban Villages, and Manufacturing/Industrial Centers

Considerations as we apply this policy:

Considerations as we apply this policy:

At Critical Connections in the Bicycle Network

Considerations as we apply this policy:

1. Complete complementary policies around right-of-way allocation and prioritization to affirm a

Complementary Policies and Actions to Inform Right-of-way Allocation Decisions

Prepare a People Streets and Spaces Plan (PSS)

Bell St is an example of an urban curbless street that is designed to

Prepare a Transit Lane Policy

Prepare a Freight Lane Policy

Prepare Project Development Tools

Develop outreach and engagement tools to support community conversations

Develop flex zone/curbspace change guidance

Develop Critical Bicycle Connections Map

• Integrate the mapped layer into the complete streets process.

Integrate Our Modal Plans into a Citywide Transportation Plan

Policy & Operations Advisory Group

SDOT Project Team

SDOT Core Team (Subject Matter Experts)

Appendix A: Existing Policy Framework

Figure 2: City of Seattle Plans and Key Policy Initiatives

The Comprehensive Plan

Figure 4: Right-of-Way Priority Functions

Figure 5: Cross Section Showing the Location of Right-of-Way Functions

Figure 6: Priorities for Right-of-Way “Flex Zone” by Predominant Use of Area

Complete Streets Ordinance

Climate Action Plan

Figure 7: Seattle’s Key Mode-Share and Access Targets

Race and Social Justice Initiative

Bicycle Master Plan: Recommended Bicycle Network

The Recommended Bicycle Network in the

The Recommended Bicycle Network consists

It is important to note the plan states that,

Transit Master Plan: Frequent Transit Network

The Transit Master Plan includes

In total, the Frequent Transit

Freight Master Plan: Major Truck Street Network

The City’s freight network

The networks within the FMP