Summative Test in TLE 8

Department of Education
Tandag City Division

Carmen Integrated School
Maitum, Tandag City
TECHNOLOGY and LIVELIHOOD EDUCATION

TLE 8
Summative Test
Name :__________________________________________Date:_______________
School:__________________________________________Score:_____________
Directions: Choose and write the letter of the correct answer in your
activity notebook.
1. Which of the following saws that is used for cutting irregular shape in a
small board?
A. back saw C. cross cut saw
B. coping saw D. keyhole saw
2. What tool is used to cut along or parallel to the grain of the wood?
A. back saw C. key hole saw
B. cross cut saw D. rip saw
3. Which of these tools used to test the squareness of material and
enable lines to be marked at right angles (90˚) and angle up to 45
degrees?
A. framing square C. ruler
B. miter try square D. sliding t -bevel
4. Which of the following fasteners, having sharp point on one end and a
flattened head on the other?
A. bolts C. nails
B. screws D. tie wire
5. It is a hand tool used for cutting across the grains of the wood.
A. back saw C. keyhole saw
B. cross cut saw D. rip saw
6. A chemical substance comes from vegetables, milk, fish, animal hide
and synthetic resins
A. adhesive C. shellac
B. paint D. varnish
7. It is an implement manipulated by hand to facilitate carpentry works.
A. claw Hammer C. tool
B. cross cut saw D. material
8. Type of coated abrasive material that consist of sheet of paper or
cloth.
A. adhesive C. sand paper
B. paintbrush D. sharpening stone
9. It is a tool used for measuring long, short, and straight lengths.
A. meter stick C. ruler
B. pull push rule D. try square
10. A tool suspended from a string and used as a vertical reference line
A. miter try square C. rip saw
B. plumb bob D. pull push rule
11. It is used to remove fine amounts of material from a work piece.
A. chisel C. jack plane
B. file D. spokeshave
12. What material is a by-product of lumber?
A. hardiflex C. lumber
B. timber D. plywood
13. It is a tool used for driving and pulling out nails.

A. ball-peen hammer C. mallet
B. claw hammer D. sledgehammer
14. What carpentry hardware that is used with a padlock and has a slotted
plate fitting over the staple to prevent its removal when locked?
A. door knob C. hinge
B. drawer pull D. safety hasp
15. It is a type of wood that has been processed or sawn into beams and
planks.
A. lawanit C. plyboard
B. lumber D. plywood
16. It is a thin line that extends from the object outlines or point on the object
placed outside the object area.
A.Border Line C. Hidden Line
B.Extension Line D. Section Line
17. Heavy, solid line used to frame in the drawing.

B,Center Line D. Visible Line
18. A very light line used to “block in” an object. These lines are made so
light that little or no erasing is needed.
A.Dimension Line C. Extension Line
B.Construction Line D. Visible Line
19.. Light thin lines used to show the sizes of the object.
A. Border Line C. Hidden Line
B. Dimension Line D. Visible Line
20. What do you call the drawing showing the plan, elevations, sections,
and other features?
A.Design C. Drawing
B.Diagram D. Layout
21. A simplified drawing showing the appearance, structure, or working

and etc.
A. Design C. Layout
B. Diagram D. Location
22. A medium line used to show edges and contours not visible to the
eye.
A.Construction Line C. Invisible Line

B.Extension Line D. Visible Line
23. This is long-short-short-long lines most often used to show the travel
or movement of an object.
A. Border Line C. Phantom Line

B. Hidden line D. Visible Line
24. One of a series of thin parallel lines placed on the cut surfaces of the
object.

B. Extension Line D. Section Line
25. A medium line used to show the edges of the object and contours
visible to the eye.

B. CenterLine D. Visible Line
26. This kind of line which used as axis of a symmetry.
A. Center Line C. Hidden Line

B. Dimension Line D. Section Line
27. Heavy line draws freehand for the same purpose as long break.
A.Long Break Line C. Section Line

B.Short Break Line D. Visible Line
28. This alphabet of line is used as axis of symmetry.
A.Center Line C. Section Line

B.Hidden Line D. Visible Line
29. This alphabet of line 0.90 is called.

B.Dimension Line D. Section Line
30. What kind of alphabet of lines is this - - - - - - - - - - - - - ?

B.Extension Line D. Section Line
Steps in filing up a requisition form

Directions: From the given words in the box, fill in the blank with an
appropriate word in filing up a requisition form. Do it in your activity notebook.
price name requisitioner authorities number

unit date classification description quantity
In filing up a requisition form, the following steps are to be observed: First

state the 1. ________ of the project and 2.________. Second, fill in the 3.
___________ of the project and its purpose. Third, write the 4. ___________
of the required materials under the column of 5. _____________. Fourth,
indicate the 6. _________ of materials to be requested. Fifth, write the
materials with their 7. _____ _______. Sixth, put the 8. __________ per unit
and the total price. Seventh, affix your signature over printed name as 9.
_____________. Lastly, secure the approval of 10. ___________ concerned

Summative Test in TLE 8

Uploaded by

Copyright:

Available Formats

Summative Test in TLE 8

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Summative Test in TLE 8

Uploaded by

Copyright:

Available Formats

Department of Education

Tandag City Division

TECHNOLOGY and LIVELIHOOD EDUCATION

13. It is a tool used for driving and pulling out nails.

17. Heavy, solid line used to frame in the drawing.

21. A simplified drawing showing the appearance, structure, or working

A.Construction Line C. Invisible Line

A. Border Line C. Phantom Line

A. Border Line C. Hidden Line

A. Border Line C. Hidden Line

26. This kind of line which used as axis of a symmetry.

A. Center Line C. Hidden Line

A.Long Break Line C. Section Line

28. This alphabet of line is used as axis of symmetry.

A.Center Line C. Section Line

A.Border Line C. Hidden Line

30. What kind of alphabet of lines is this - - - - - - - - - - - - - ?

A.Border Line C. Hidden Line

Steps in filing up a requisition form

price name requisitioner authorities number

In filing up a requisition form, the following steps are to be observed: First

You might also like