CARPENTRY TQ - Match Tos

CARPENTRY- GRADE 8
FOURTH QUARTER UNIFIED EXAMINATION
Name: ___________________________________________
Grade&Section:_____________________ Score: ______
Directions: Select the best answer from the choices given. Write your answer on the space
provided before thenumber.
_________1. Which hand tool is NOT a testing tool?

a. Try Square b. Steel Square c. Spoke Shave d. Plumb Bob
_________2. Which is NOT an example of materials?
a. Level Bar b. Lumber c. Water d. Nail
_________3.What material is needed to construct a cabinet?
a. Cement b. Plywood c. Sand d. Gravel
_________ 4. Which hand tool would you pick if you were asked to find and get a measuring tool?
a. Marking Gauge b. Pull-push Rule c. Chalk Line d. Pencil
________5. A folded measuring tool commonly used for overhead measurement.
a. Caliper b. Meterstick c. Pull push rule d. Zigzag rule
________6. Used for laying out angles
a. Compass b. Protractor c. Divider d. Ruler
________7. Used for measuring short piece of stock.
a. Ruler b. Divider c. Compass d. Protractor
_______8. It is used to measure length. It is often made of wood, plastic, and metal.
a. Caliper b. Meterstick c. Zigzag rule d. Divider
_________9. Which refers to something that is made or accomplished?
a.Requisition b. Tool c. Bill d. Work
_________10. What is the form that you need to fill in if you want to write a written request?
a. Requisition b. Tool c. Bill d. Work
_________11. Which is defined as simple implement?
a. Requisition b. Tool c. Bill d. Work
_________12.The price of one (1) hammer that Kate’s father just bought is 200 pesos. What part of the
Bill of materials is P200.00?
a. Requisition Unit b. Quantity c. Unit Price d. Materials and Description
_________13. Why it is important to check and inspect the materials and tools for any defect and
damage before receiving them?
a. so you can count the materials and tools properly
b. so you will know how many damaged materials and tools
c. so that you can ask for replacements for those that you found defective
d. so you can reprimand the supplier for delivering damaged materials or tools
_________14.What part of the Bill of Materials are the term kilo, liter ,piece and foot called?
a. Requisition Unit b. Quantity c. Unit Price d. Materials and Description
_________15.What process are we into if we count the tools and materials we used?
a. Label b. Mensuration c. Segregation d. Inventory
_________16. Angeles Family is very good at setting aside things from the others. What is this practice
that the family has been good at?
a. Label b. Mensuration c. Segregation d. Inventory
_________17. Accidents can be prevented _______________
a. through proper care and maintenance of tools and equipme
b. right attitude toward work
c. if you have a good knowledge about safety practices
d. None of the above
_________18. Identifying hazards makes you_________________.
a. safe from working
b. comfortable while working
c. work efficient
d. all of the above
_________19. Which will complete this group of hand tools: Chisel, Plane, Cabinet Scraper, and ____?
a. Try Square b. Steel Square c. Spoke Shave d. Plumb Bob
_________20.What PPE Personal Protective Equipment will you use to prevent the inhalation of
sprayed paint fumes? a. Face Mask b. Apron c. Ear Protector d. Gloves
__________21. The process or the result of determining the magnitude of a quantity, such as length,
meter, decimeter, centimeter, yard, foot and inch.
a. Carpentry b. Masonry c. Measurement d. Still man
_______22. It is the measuring tape that coil into a compact case, used for measuring long, short, and
straight lengths.
a. Pull push rule b. Meter tri-square c. Caliper d. Meterstick
_______23. Used for dividing distance
a. Compass b. Divider c. Protractor d. Ruler
_______24. It is used for laying out and scribing arcs and circles.
a. Protractor b. Divider c. Ruler d. Compass
_______25. This system of measurement is based on inch, yard, and foot. It is primarily used in the
United State and England.
a. English System b. Metric System c. Working System d. Dividing System
_______26. In every 1 centimeter, there are always 10 graduations or?
a. 20 millimeters b. 10 millimeters c. 15 millimeters d. 5 millimeters
_______27. A measurement of one foot is equivalent to?
a. 12 millimeters b. 12 inches c. 10 decimeter d. 1 meter
_______28. It is the decimalized system of measurement. It exists in several variation with different
choices of base unit such as meter, centimeter, millimeter, and decimeters.
a. English system b. Metric system c. Working system d. Dividing system
_______29.How many inches are there in four (4) ft?
a. 36 inches b. 50 inches c. 40 inches d. 48 inches
______30.How many feet are there in 60 inches?
a. 5ft b. 4ft c. 8ft d. 10ft
______31.It is the unit measure used in computing the volume of lumber.
a. Metric system b. English system c. Board foot d. Kilogram
______32. How many inches are there in 6ft?
_______33.Which of these International Standard base units for measuring length?
a. Decimeter b. Meter c. Millimeter d. All of the above
_______34.How would you convert 3ft to 36 inches?
a. Divide by 12 b. Divide by 22 c. Multiply by 12 d. Multiply by 22
_______35. What system of measurement that include millimeter, meter, centimeter, and the like?
a. English b. Inches c. Metric d. Yard
_______36 .An inch divided into segments is called what?
a. Graduation b. Linear c. Measurement d. Units
_______37.Which of the following indicates shortest length?
a. 1 centimeter b. 1 decimeter c. 1 meter d. 1 millimeter
_______38 .What is the equivalent of 10 centimeters into millimeters?
a.100 millimeters b.1000 millimeters c. 10000 millimeters d. 100000 millimeters
______39 .How many inches are there in 10ft?
_______40 .How much will cost to slice 6” x “6 x 10’ wood to produce 2” x 6” x 10’ lumber at 2PHP per
board foot?

CARPENTRY TQ - Match Tos

Uploaded by

Copyright:

Available Formats

CARPENTRY TQ - Match Tos

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CARPENTRY TQ - Match Tos

Uploaded by

Copyright:

Available Formats

CARPENTRY- GRADE 8

FOURTH QUARTER UNIFIED EXAMINATION

_________1. Which hand tool is NOT a testing tool?

You might also like