SC 8300

Spare parts list

Hydraulic steel cutter
SC 8300 s/n DEQ169170 -

© 2018 Construction Tools GmbH | No. 3390788901| 2018-05-23

General information
This spare parts list applies to the following:

Part number Description

3363119002 Hydraulic steel cutter SC 8300

Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
Any unauthorized use or copying of the contents or any part thereof is
prohibited. This applies in particular to trademarks, model denominations, part
numbers, and drawings.

Instructions for use

This spare parts list contains no safety regulations and is merely intended to
assist in the ordering of spare parts.
For information about operating, servicing, or repairing, the relevant Safety
and operating instructions must be consulted at all costs.
Please observe the safety instructions listed in the relevant Safety and operating
instructions!

Instructions for ordering

It is essential to indicate the serial number of the hydraulic attachment when
ordering spare parts!
Please note the full identification number of your hydraulic attachment.
Determine the quantity of individual parts which are required and need to be
ordered. The order must indicate the following details:

• full identification code of the hydraulic attachment

• required quantity
• part number
• description
Service, repair and wear part kits
Kit list 1

Mechanical
Housing part 1 3
Housing part 2 5
Cutter jaw 7
Hydraulic cylinder 9
Hydraulic hose connections 11
Tightening torques 13
Dimensions 15

Options / accessories
Hydraulic hoses 16
Optional equipment 19
DocMine SC 8300 s/n DEQ169170 -

Service, repair and wear part kits Kit list

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:06 UTC 2018
1
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

KIT 3363118789 Label kit 1

KIT 3363119442 Blade kit 1

52 3363119439 Shim set 2 A

53 3363119440 Cutter blade 2

54 3363118655 Flat head socket bolt 8

55 3363118656 Guide blade 2

58 3363118657 Shim set 2 B

59 0211164300 Allen screw, M24 x 120 mm 12.9 4

60 3363118665 Washer 18

61 3363118661 Front blade 1

62 3363118662 Hexagon head bolt 2

63 0211164200 SCREW 8

64 0211164500 SCREW 4

102 3363118726 Nose blade 1

103 3360203349 Hexagon nut 8

104 3363118665 Washer 8

105 3363118729 Allen screw 3

106 3363118728 Nose blade 1

107 3363119440 Cutter blade 2

108 3363118669 Flat head socket bolt 2

109 3363118671 Flat head socket bolt 5

111 3363118670 Flat head socket bolt 1

214 3363118713 Seal kit (Hydraulic cylinder) 1

231 3363118697 Seal kit 1 C

241 3363118677 Seal kit 1 D

Comments for Page: Kit list

A | for item 53

B | for item 55

C | for item 201

D | for item 204

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:06 UTC 2018
2
DocMine SC 8300 s/n DEQ169170 -

Mechanical Housing part 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:07 UTC 2018
3
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

1 3363119421 Housing 1

2 3363119422 Main cover 1

3 3361333703 Pair of lock washers 8

4 3360103766 Allen screw 4

5 0211196446 Allen screw, M20 x 240 mm 12.9 2

6 3361850478 Pair of locking rings 20

7 3363118636 Grease nipple 6

8 3363118634 Bolt retainer 2

9 3363118635 Bolt 1

10 3360203345 Hexagon nut 2

11 3363118637 Slide screw 1

12 3363118646 Kantseal 1

13 3363118638 Slide puck 1

14 3362328039 Allen screw 12

15 3361850596 Pair of lock washers 20

16 3363118640 O-ring 2

17 3363118639 Tie rod 1

18 0211140000 Cap screw 8

19 0211155900 Allen screw, M20 x 90 mm 12.9 16

20 3363087853 Flat head socket bolt 4

21 3363118642 Bearing bush 1

22 3363118643 Shim set (Pivot group) 1

23 3363118644 Thrust bearing 2

24 Main bolt 1 A

25 3363118647 Bearing bush 1

26 3363118648 Nut 1

27 3363118641 Cap 2

28 3363118649 Lock 1

29 3360026641 Allen screw 4

30 3363091047 Flat head socket bolt 8

31 3363119437 Side cover 2

32 3363118651 Bolt 1

Comments for Page: Housing part 1

A | Not serviceable, consult the authorized Customer Center/Dealer in your area.

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:07 UTC 2018
4
DocMine SC 8300 s/n DEQ169170 -

Mechanical Housing part 2

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:08 UTC 2018
5
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

51 3363119438 Compensation plate 1 C

52 3363119439 Shim set 2 A

53 3363119440 Cutter blade 2

54 3363118655 Flat head socket bolt 8

55 3363118656 Guide blade 2

56 3363119441 Compensation plate 1 C

57 3363118658 Compensation plate 1 C

58 3363118657 Shim set 2 B

59 0211164300 Allen screw, M24 x 120 mm 12.9 4

60 3363118665 Washer 18

61 3363118661 Front blade 1

62 3363118662 Hexagon head bolt 2

63 3360203349 Hexagon nut 8

64 0211164500 SCREW 4

65 3363118663 Guide blade seat 1

Comments for Page: Housing part 2

A | for item 53

B | for item 55

C | Serial number related, consult the authorized Customer Center/Dealer in your area.

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:08 UTC 2018
6
DocMine SC 8300 s/n DEQ169170 -

Mechanical Cutter jaw

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:08 UTC 2018
7
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

101 Cutter jaw 1 A

102 3363118726 Nose blade 1

103 3360203349 Hexagon nut 8

104 3363118665 Washer 8

105 3363118729 Allen screw 3

106 3363118728 Nose blade 1

107 3363119440 Cutter blade 2

108 3363118669 Flat head socket bolt 2

109 3363118671 Flat head socket bolt 5

110 3363118672 Bearing bush 1

111 3363118670 Flat head socket bolt 1

Comments for Page: Cutter jaw

A | Cutter jaw must be aligned at factory. Consult the authorized Customer Center/Dealer in your area.

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
8
DocMine SC 8300 s/n DEQ169170 -

Mechanical Hydraulic cylinder

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
9
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

201 3363118696 Counterbalance valve 2

202 3363119453 Hydraulic cylinder 1

203 3363118699 Check valve 1

204 3363118700 Relief valve 1

205 3363118702 Port block 1

206 3363118703 Support plate 2

207 0211155500 Allen screw, M20 x 70 mm 12.9 20

208 3361850748 Pair of lock washers 20

209 3363118704 Seal 3

210 3363118705 Glide bush 2

211 3363119469 Hydraulic hose 1 A

212 3363119454 Hydraulic hose 1

213 3363119467 Hydraulic hose 1 B

214 3363118709 Seal 4

215 3363118710 Flange half 4

216 3363083439 Flange half 8

217 0211148000 SCREW 8

218 3361333703 Pair of lock washers 8

220 3363118713 Seal kit (Hydraulic cylinder) 1

231 3363118697 Seal kit 1 C

241 3363118677 Seal kit 1 D

Comments for Page: Hydraulic cylinder

A | CR - Steel cutter jaw close

B | CB - Steel cutter jaw open

C | for item 201

D | for item 204

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
10
DocMine SC 8300 s/n DEQ169170 -

Mechanical Hydraulic hose connections

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
11
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

801 Intermediate plate 1

802 3363119070 Washer 28

803 3363119458 Hexagon head screw 28

804 3363119460 Portblock 2

805 0300027622 PLAIN WASHER 8

806 3360103768 Allen screw 8

807 3363119465 Blind flange 2

808 3363119466 Flange half 4

809 3363118704 Seal 2

810 0211155500 Allen screw, M20 x 70 mm 12.9 8

811 3361850748 Pair of lock washers 8

812 3363119468 Blind flange 4

813 3363083439 Flange half 8

814 3363118709 Seal 4

815 3361333703 Pair of lock washers 16

816 0211148000 SCREW 16

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
12
DocMine SC 8300 s/n DEQ169170 -

Mechanical Tightening torques

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:09 UTC 2018
13
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

4 - Allen screw - 215 Nm (159 ft lbf)

5 - Allen screw - 720 Nm (531 ft lbf)

7 - Grease nipple - 18 Nm (13 ft lbf)

14 - Allen screw - 150 Nm (111 ft lbf)

18 - Screw - 150 Nm (111 ft lbf)

19 - Allen screw - 720 Nm (531 ft lbf)

20 - Flat head socket bolt - 130 Nm (96 ft lbf)

29 - Allen screw - 215 Nm (159 ft lbf)

30 - Flat head socket bolt - 87 Nm (64 ft lbf)

54 - Flat head socket bolt - 1060 Nm (782 ft lbf)

59 - Allen screw - 1240 Nm (915 ft-lbf)

62 - Hexagon head bolt - 1240 Nm (915 ft-lbf)

63 - Hexagon nut - 1060 Nm (782 ft lbf)

64 - Allen screw - 1240 Nm (915 ft-lbf)

103 - Hexagon nut - 1060 Nm (782 ft lbf)

105 - Allen screw - 3737 Nm (2756 ft lbf) A

108 - Flat head socket bolt - 1060 Nm (782 ft lbf)

109 - Flat head socket bolt - 1060 Nm (782 ft lbf)

111 - Flat head socket bolt - 1060 Nm (782 ft lbf)

207 - Allen screw - 720 Nm (531 ft lbf)

217 - Allen screw - 370 Nm (273 ft lbf)

803 - Hexagon head screw - 2100 Nm (1549 ft lbf)

806 - Allen screw - 215 Nm (159 ft lbf)

810 - Allen screw - 720 Nm (531 ft lbf)

816 - Allen screw - 370 Nm (273 ft lbf)

Comments for Page: Tightening torques

A | Recommended to use copper grease

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:10 UTC 2018
14
DocMine SC 8300 s/n DEQ169170 -

Mechanical Dimensions

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:10 UTC 2018
15
DocMine SC 8300 s/n DEQ169170 -

This page intentionally left blank

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:10 UTC 2018
16
DocMine SC 8300 s/n DEQ169170 -

Options / accessories Hydraulic hoses

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:10 UTC 2018
17
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

- 3363118842 Hydraulic Hose, I.D. 38 (1.50 in.) flange SAE 45° 1 1/2 in. - 6000 PSI, , 1 7/8 in. 2
JIC, length 2800 mm (110 in.)

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:10 UTC 2018
18
DocMine SC 8300 s/n DEQ169170 -

Options / accessories Optional equipment

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:11 UTC 2018
19
DocMine SC 8300 s/n DEQ169170 -

Item Part No. Name Qty L

900 3363094914 Cutter grease cartridge, 12 x 400 g (0.88 lbs) 1

901 4812037402 Grease / 12 cartridges / 12 Kart. 1 A

902 0909107100 LUBRICAT.GUN 1

903 3363120977 Maintenance box 1

904 Adapter plate matching the carrier. Consult the authorized Customer Center/Dealer 1
in your area.

905 3363104609 Base plate with threaded inserts 1

906 3363103061 Bolt kit 1

907 3363102877 Base plate with through borings 1

908 3363094578 Bolt kit 1

909 3360103802 Allen screw 1

Comments for Page: Optional equipment

A | PARLUBE, 12 x 400 g cartridges, fully synthetic, for temperatures up to 200 °C / 392 °F

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Wed May 23 11:25:11 UTC 2018
20
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers, and
drawings.

epiroc.com