SDX15D4: Features

Datasheet -- SDX15D4
SDX15D4
Pressure Sensors: Measurement Type: Differential, Gage; 0
psid to 15 psid, Temperature Compensated Sensor, "D4"
DIP Package - Straight Port
Features
● Low Cost DIP
● Precision Temperature Compensation
Representative photograph, ● Calibrated Zero & Span
actual product appearance ● Small Size
may vary. ● Low Noise
● High Impedance for Low Power Applications
Due to regional agency ● Prime Grade Available (SDXxxxyy-A)
approval requirements,
some products may not be
available in your area.
Please contact your Typical Applications
regional Honeywell office ● Medical Equipment
regarding your product of ● Computer Peripherals
choice. ● Pneumatic Controls
● HVAC
Description
The SDX series sensors provide a very cost effective solution for
pressure applications that require small size plus performance.
These calibrated and temperature compensated sensors give an
accurate and stable output over a 0 °C to 50 °C [32 °F to 122 °F]
temperature range. This series is intended for use with non-
corrosive, non-ionic working fluids such as air, dry gases and the
like.
Devices are available to measure absolute and gage pressures from

1 psi (SDX01) up to 100 psi (SDX100). The absolute devices have
an internal vacuum reference and an output voltage proportional to
absolute pressure.
SDX Sensors are available in standard commercial and prime grades

file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15D4.htm (1 of 6)14/03/2005 12:33:36 ã
(SDCxxxyy – A) to allow optimization of accuracy and cost in any

given application.
The SDX devices feature an integrated circuit (IC) sensor element

and laser trimmed thick film ceramic housed in a compact solvent
resistant case. The package is a double-wide (i.e. 0.600 inches lead
spacing) dual-inline package (DIP). This is the same familiar
package used by IC manufacturers except it is only 11,94 mm
[0.470 in] long and has a pressure port(s). The pc board area used
by each DIP is approximately 0.26 in x 0.26 in. This extremely small
size enables the use of multiple sensors in limited available space.
The DIP provides excellent corrosion resistance and isolation to
external package stress.
The DIP mounts on a pc board like a standard IC with through-hole

pins. The pins anchor the pressure sensor to the pc board and
provide a more secure and stable unit than other types of packages.
The output of the bridge is ratiometric to the supply voltage and
operation from any Vdc supply voltage up to 20 Vdc is acceptable.
SDX15D4
Pressure Sensors: Measurement Type: Differential, Gage; 0 psid to 15 psid,
Temperature Compensated Sensor, "D4" DIP Package - Straight Port
Product Specifications
Measurement Type Gage, Differential
Signal Conditioning Unamplified
Pressure Range 0 psid to 15 psid
Maximum Overpressure 30 psi
Supply Voltage 20 Vdc max.
Compensated Yes
Output Calibration Yes
Response Time 100 µS
Termination PCB
Port Style Straight
Package Style A4/D4 DIP
Full Scale Span 86.85 mV min, 90.00 mV typ., 93.15 mV max.

± 0.2 % FS span typ., ± 1.0 % FS span max.; 0 °C to
Null Shift over Temperature
50 °C [32 °F to 122 °F]
± 0.4 % FS span typ., ± 2.0 % FS span max.; 0 °C to
Span Shift Over Temperature
50 °C [32 °F to 122 °F]
Zero Pressure Offset -1.0 mV min., 0.0 mV typ., 1.0 mV max.
Linearity, Hysteresis Error ± 0.2 typ. ± 1.0 max. %FS
Repeatability ± 0.2 % span typ., ± 0.5 % span max.
Input Resistance 4.0 kOhms typ.
Output Resistance 4.0 kOhms typ.
Operating Temperature Range -40 °C to 85 °C [-40 °F to 185 °F]
Compensated Temperature
0 °C to 50 °C [32 °F to 122 °F]
Range
Storage Temperature Range -55 °C to 125 °C [-67 °F to 257 °F]
Media Compatibility Clean, dry gases only
UNSPSC Code 411121
UNSPSC Commodity 411121 Transducers
Lead Temperature Soldering 2 s to 4 s at 250 °C [482
Comment
°F]
Availability Global
Series Name SDX Series
SDX15D4


SDX15D4
SDX15D4

PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices, or in any other
application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious injury.
MISUSE OF DOCUMENTATION
● The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
● Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious injury.
© Copyright Honeywell Inc.1998-2004 All rights reserved.

SDX15D4: Features

Uploaded by

Copyright:

Available Formats

SDX15D4: Features

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SDX15D4: Features

Uploaded by

Copyright:

Available Formats

Datasheet -- SDX15D4

Devices are available to measure absolute and gage pressures from

SDX Sensors are available in standard commercial and prime grades

(SDCxxxyy – A) to allow optimization of accuracy and cost in any

The SDX devices feature an integrated circuit (IC) sensor element

The DIP mounts on a pc board like a standard IC with through-hole

Full Scale Span 86.85 mV min, 90.00 mV typ., 93.15 mV max.

file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15D4.htm (3 of 6)14/03/2005 12:33:36 ã

file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15D4.htm (4 of 6)14/03/2005 12:33:36 ã

file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15D4.htm (5 of 6)14/03/2005 12:33:36 ã

© Copyright Honeywell Inc.1998-2004 All rights reserved.

file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15D4.htm (6 of 6)14/03/2005 12:33:36 ã

You might also like