Rigid Body Equilibrium

Support Reactions Prevention of Translation or

Rotation of a body

Restraints

1
Rigid Body Equilibrium

Various Supports
2-D Force Systems

2
Rigid Body Equilibrium

Various Supports
3-D Force Systems

3
Rigid Body
Equilibrium
Categories
in 2-D

4
Rigid Body
Equilibrium
Categories
in 3-D

5
Equilibrium of a Rigid Body in Two Dimensions
• For all forces and moments acting on a two-
dimensional structure,

Fz  0 M x  M y  0 M z  MO
• Equations of equilibrium become

 Fx  0  Fy  0  M A 0
where A is any point in the plane of the structure.
• The 3 equations can be solved for no more
than 3 unknowns.

• The 3 equations can not be augmented with

additional equations, but they can be replaced

 Fx  0  M A  0  MB  0
6
Statically Indeterminate Reactions

• More
• Fewer unknowns • Equal number unknowns
unknowns than
equations: than equations, and equations but
Statically partially constrained improperly constrained
Indeterminate 7
Rigid Body Equilibrium: Example
Solution:
• Create a free-body diagram of the
joist.
- The joist is a 3 force body acted upon
by the rope, its weight, and the
reaction at A.
• The three forces must be concurrent
for
length 4 m, by pulling on a -Reaction
static R must pass through the
equilibrium.
Arope.
man raises a 10 kg joist, of intersection of the lines of action of
the weight and rope forces.
Find the tension in the
rope -Determine the direction of the reaction
and the reaction at A. force R.
• Utilize a force triangle to determine
the magnitude of the reaction force R.
8
Rigid Body Equilibrium: Example
• Create a free-body diagram of the joist

• Determine the direction of the reaction force

R

AF  AB cos 45  4 mcos 45  2.828 m

CD  AE  12 AF  1.414
m
BD  CD cot(45  20)  1.414 mtan 20 
0.515 m
CE  BF  BD  2.828  0.515 m  2.313 m
CE 2.313
tan  AE  1.636
1.414

58.6

9
Rigid Body Equilibrium: Example
• Determine the magnitude of the reaction
force R.

T 98.1

R  N
sin 31.4  sin110 sin
38.6

T  81.9 N
R  147.8 N

10
Engineering Structure
• Any connected system of members to transfer the
loads and safely withstand them

11
Structural Analysis
Structural Analysis
ME101 Trusses/Frames/Machines/Beams/Cables
 Statically Determinate Structures
To determine the internal forces in the structure, dismember
the structure and analyze separate free body diagrams of
individual members or combination of members.

ME101 - Division III 12

Structural Analysis :: Plane Truss

13
Structural Analysis :: Plane Truss

14
Structural Analysis: Plane Truss
Truss: A framework composed of members joined at
their ends to form a rigid structure
– Joints (Connections): Welded, Riveted, Bolted, Pinned

Plane Truss: Members lie in a single plane

15
Structural Analysis: Plane Truss
Simple Trusses
Basic Element of a Plane Truss is the Triangle
• Three bars joined by pins at their ends  Rigid Frame
– Non-collapsible and deformation of members due to induced
internal strains is negligible

• Four or more bars polygon  Non-Rigid Frame

How to make it rigid or stable?
by forming more triangles!

Structures built from basic triangles

Simple Trusses

16
Structural Analysis: Plane Truss
Basic Assumptions in Truss Analysis
• All members are two-force members
• Weight of the members is small compared
with the force it supports (weight may be
considered at joints).
– no effect of bending on members even if weight is
considered
• External forces are applied at the pin
connections
• Welded or riveted connections  Pin Joint if the
member centerlines are concurrent at the joint

Common Practice in Large Trusses

- Roller/Rocker at one end. Why?
- to accommodate deformations due to temperature
changes and applied loads.
- otherwise it will be a statically indeterminate truss
17
Structural Analysis: Plane Truss
Truss Analysis: Method of Joints
• Finding forces in members
Method of Joints: Conditions of equilibrium are
satisfied for the forces at each joint
– Equilibrium of concurrent forces at each joint
–only two independent equilibrium equations are involved
Steps of Analysis
1. Draw Free Body Diagram of Truss
2. Determine external reactions by applying
equilibrium equations to the whole truss
3.Perform the force analysis of the remainder
of the truss by Method of Joints

18
Structural Analysis: Plane Truss
Method of Joints
• Start with any joint where at least one known load exists
and where not more than two unknown forces are present.

FBD of Joint A and members AB and AF: Magnitude of forces denoted as AB & AF
- Tension indicated by an arrow away from the pin
- Compression indicated by an arrow toward the pin
Magnitude of AF from
Magnitude of AB
from

Analyze joints F, B,
C, E, & D in that 19
Structural Analysis: Plane Truss
Method of Joints

Zero Force
Member

Check
Equilibrium
• Negative force if assumed
sense is incorrect
Show
forces on

members
20
Method of Joints: Example
Determine the force in each member of the loaded truss by
the method of joints

21
Method of Joints: Example

Free Body Diagram

22
Method of Joints: Example
• Joint A

23
Method of Joints: Example
• Joint B

24
Method of Joints: Example
• Joint C

25
Method of Joints: Example
• Joint E

26