Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Cikomould Pu: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    CIKOmould PU is a two-component, polyurethane-based liquid mould material used to create negative moulds for precast concrete elements. It has high resilience and elasticity once cured. The document provides instructions on mixing, applying, and curing CIKOmould PU. It is suitable for glass reinforced concrete industries and precast cladding applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cikomould Pu: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    66 views2 pages
    CIKOmould PU is a two-component, polyurethane-based liquid mould material used to create negative moulds for precast concrete elements. It has high resilience and elasticity once cured. The document provides instructions on mixing, applying, and curing CIKOmould PU. It is suitable for glass reinforced concrete industries and precast cladding applications.

    Original Title

    CIKOmould PU

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CIKOmould PU is a two-component, polyurethane-based liquid mould material used to create negative moulds for precast concrete elements. It has high resilience and elasticity once cured. The document provides instructions on mixing, applying, and curing CIKOmould PU. It is suitable for glass reinforced concrete industries and precast cladding applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views2 pages

    Cikomould Pu: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    CIKOmould PU is a two-component, polyurethane-based liquid mould material used to create negative moulds for precast concrete elements. It has high resilience and elasticity once cured. The document provides instructions on mixing, applying, and curing CIKOmould PU. It is suitable for glass reinforced concrete industries and precast cladding applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data

    Sheet

    CIKOmould PU
    Liquid applied rubber mould for GRC

    Description Coverage
    CIKOmould PU is high resilient polyurethane CIKOmould PU provides yield as follows.
    based, liquid applied mould material for
    20 kg pack 15.5 litre
    preparing negative mould to in precast or in
    situ concrete industries. CIKOmould PU is
    mostly used for making architectural glass Note: The coverage depends on the surface type and
    reinforced concrete elements. The cured condition.
    material provides very high elastomeric
    property with sufficient hardness. Application instructions
    Surface preparation
    The master positive mould should be free from all loose
    Properties particles and dust. All holes and corners should be
     Cold applied two component system. sealed using silicone sealant. After ensuring preparation,
     Available in pouring grade mould release agent, CIKOmould release, should be
    consistency. applied on master positive mould just before application
     Exhibits good resilience. of CIKOmould PU.
     Available in grey colour.
     Low maintenance cost. Mixing
    The base component of CIKOmould PU should be mixed
    thoroughly using a heavy duty slow speed drill fitted with
    Application area
    paddle and ensure a homogenous mix. The hardener
    CIKOmould PU is a high quality mould material
    component should be poured into the base component
    suitable for,
    and mixed well, typically 4 to 5 minutes, until a
     Glass reinforced concrete industries. homogenous mix is obtained.
     Concrete pre-cast claddings.
     Special architectural works. Application method
    Partial mixing of CIKOmould PU is strictly prohibited
    Physical properties because of its sensitivity. Properly mixed materials shall
    Two component Semi- be poured into master positive mould by providing
    Form shuttering around. Spread the liquid component
    viscous liquid system
    Colour Greyish uniformly over master positive and make sure it is at
    least 5mm above master positive. Care should be taken
    Solid content 100% to avoid entrapped air in the mixed material.
    0
    Viscosity @ 25 C 8000 cps ± 1000 CIKOmould PU should be allowed to cure for 24 hours
    Consistency Pouring grade before de-moulding.
    0
    Pot life 30-40 minutes @ 25 C
    Packaging
    Application 0 0 CIKOmould PU is available in 20.0 kg kits.
    +10 C to +50 C
    temperature
    Tacky free time 24 hours @ 25 C
    0 Shelf life
    CIKOmould PU has a shelf life of 12 months in
    Stripping time 24 hours unopened pails and if stored in accordance with CIKO
    instructions.
    Shore A hardness 50±3

    1
    Storage
    CIKOmould PU should be stored under
    enclosed shaded area at temperatures
    0
    between 10 – 30 C.

    Precautions
     Do not use over damp surface or
    standing water.

    Health & safety


    CIKOmould PU should not come in contact
    with eyes or be swallowed. Ensure adequate
    ventilation and avoid inhalation of vapours.
    Applicator should wear appropriate clothes,
    gloves and goggles. Use of barrier cream is
    recommended to provide additional skin
    protection. If comes in contact with eyes flush
    with plenty of fresh water and seek medical
    advice.

    Refer Material Safety Data Sheet for further


    details.

    Technical Support
    For any technical support, do not hesitate to
    contact CIKO team at any time as CIKO offers
    on and off site services to end users, specifier
    and contractors.

    More from CIKO Middle East


    A wide range of construction chemical
    products are manufactured by CIKO Middle
    East which includes:
     Concrete admixtures and additives
     Waterproofing and damp proof
    coatings
     Surface treatments
     Flooring and toppings
     Grouts and anchors
     Tile adhesives and grout
     Concrete repair materials
     Adhesives and bonding agent
     Protective coating
     Joint Sealants and Moulding
    compounds
     Ancillaries

    TDS/ST18 Rev.:1 Issue:C


    Note: The information presented herein based on the best of our knowledge and expertise for which every effort is made to ensure its
    reliability. Although all the products are subjected to rigid quality tests and are guaranteed against defective materials and manufacture,
    no specific guarantee can be extended because results depend not only on quality but also on other factors beyond our control

    You might also like