Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Cikomould Sil: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    CIKOmould SIL is a two-part silicone rubber material for making molds. It is available in soft, medium, and hard grades. To use, the master mold must be clean and dry. A primer is applied before mixing the two components of CIKOmould SIL in a 100:3 ratio. The mixed material is poured onto the primed mold and allowed to cure for 4-5 hours. The cured rubber produces accurate replicas and has good resilience and dimensional stability. Proper storage, application, and safety precautions are described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cikomould Sil: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    43 views2 pages
    CIKOmould SIL is a two-part silicone rubber material for making molds. It is available in soft, medium, and hard grades. To use, the master mold must be clean and dry. A primer is applied before mixing the two components of CIKOmould SIL in a 100:3 ratio. The mixed material is poured onto the primed mold and allowed to cure for 4-5 hours. The cured rubber produces accurate replicas and has good resilience and dimensional stability. Proper storage, application, and safety precautions are described.

    Original Title

    CIKOmould SIL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CIKOmould SIL is a two-part silicone rubber material for making molds. It is available in soft, medium, and hard grades. To use, the master mold must be clean and dry. A primer is applied before mixing the two components of CIKOmould SIL in a 100:3 ratio. The mixed material is poured onto the primed mold and allowed to cure for 4-5 hours. The cured rubber produces accurate replicas and has good resilience and dimensional stability. Proper storage, application, and safety precautions are described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views2 pages

    Cikomould Sil: Technical Data Sheet

    Uploaded by

    Vaittianathan Mahavapillai
    CIKOmould SIL is a two-part silicone rubber material for making molds. It is available in soft, medium, and hard grades. To use, the master mold must be clean and dry. A primer is applied before mixing the two components of CIKOmould SIL in a 100:3 ratio. The mixed material is poured onto the primed mold and allowed to cure for 4-5 hours. The cured rubber produces accurate replicas and has good resilience and dimensional stability. Proper storage, application, and safety precautions are described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data

    Sheet

    CIKOmould SIL
    Liquid applied silicone rubber for mould making

    Description The mould must be free from dampness and standing


    CIKOmould SIL is silicone based mould water.
    making material that can be used for making Application of primer
    replicas with a wide variety of materials Apply CIKOmould primer on the master mould using soft
    including epoxy resins, polyester resins, GRC, brush and allow the primer to dry.
    gypsum, wax etc. The cured material is
    Mixing
    elastomeric with sufficient hardness.
    The base component [Part-A] of CIKOmould SIL should
    CIKOmould SIL is silicone resin cured with be mixed thoroughly using a heavy duty slow speed drill
    hardener to form a tough rubbery material after fitted with paddle and ensure a homogenous mix. Over
    curing. CIKOmould SIL is available in three mixing shall be avoided to minimise air entrainment. The
    variants as ‘soft’, ‘medium’ and ‘hard’ grades hardener component [Part-B] should be poured into the
    represented as CIKOmould SIL-S, CIKOmould base component [Part-A] and mixed well until a
    SIL-M and CIKOmould SIL-H respectively. homogenous mix is obtained.
    Mix ratio of base to hardener is 100:3 to achieve
    Properties
    optimum performance results.
     Cold applied two component system.
     Can be used as pouring grade or Application method
    brushing grade. Properly mixed material can be directly poured in to the
     Exhibits very little shrinkage and primed mould and levelled to the top surface.
    superior dimensional stability.
     Uniform curing irrespective of Packaging
    thickness. CIKOmould SIL is available in 21.0 kg kits.
     Non-exothermic, maintaining the
    original properties of master. Shelf life
     Exhibits good resilience and easy CIKOmould SIL has a shelf life of 12 months in
    demould. unopened pails and if stored in accordance with CIKO
     Good duplication time. instructions.
     Provides smooth surface. Storage
    CIKOmould SIL should be stored under enclosed
    Application area 0
    shaded area at temperatures between 10 – 30 C.
    CIKOmould SIL is a high quality mould
    material suitable for, Precautions
     Glass reinforced concrete industries  Do not use over damp surface or standing water.
     Concrete pre-cast claddings
     Gypsum and plaster decoration Health & safety
    elements. CIKOmould SIL should not come in contact with eyes or
     Wax ornamental members be swallowed. Ensure adequate ventilation and avoid
     Special architectural works inhalation of vapours. Applicator should wear
    appropriate clothes, gloves and goggles. Use of barrier
    Application instuctions cream is recommended to provide additional skin
    Surface preparation protection. If comes in contact with eyes flush with plenty
    Clean the master mould to make it free from all of fresh water and seek medical advice.
    loose particles, dust and other contaminations.
    Refer Material Safety Data Sheet for further details.

    1
    Physical Properties & Other Information

    Description CIKOmould SIL-S CIKOmould SIL-M CIKOmould SIL-H

    Colour White White White


    0
    Specific gravity @25 C 1.06±0.02 1.08±0.02 1.11±0.02

    Mixing ratio 100:3 100:3 100:3


    0
    Pot life @25 C; mins 30 - 40 30 - 40 30 - 40
    0
    Curing time @25 C; hrs 4-5 4-5 4-5

    Hardness; Shore A 20±2 30±2 40±2

    Tensile strength; MPa 3.0±0.3 3.8±0.5 3.5±0.5

    Tear strength; kN/m 19±2 26±2 17±2

    Shrinkage rate % <0.3% <0.3% <0.3%

    Elongation % 400% 400% 150%

    Technical Support
    For any technical support, do not hesitate to
    contact CIKO team at any time as CIKO offers
    on and off site services to end users, specifier
    and contractors.

    More from CIKO Middle East


    A wide range of construction chemical
    products are manufactured by CIKO Middle
    East which includes:
     Concrete admixtures and additives
     Waterproofing and damp proof
    coatings
     Surface treatments
     Flooring and toppings
     Grouts and anchors
     Tile adhesives and grout
     Concrete repair materials
     Adhesives and bonding agent
     Protective coating
     Joint Sealants and Moulding
    compounds
     Ancillaries

    TDS/ST18 Rev.:1 Issue:C


    Note: The information presented herein based on the best of our knowledge and expertise for which every effort is made to ensure its
    reliability. Although all the products are subjected to rigid quality tests and are guaranteed against defective materials and manufacture,
    no specific guarantee can be extended because results depend not only on quality but also on other factors beyond our control

    You might also like