Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    1.69" SS100-G2-F: Motor Loads General Dimensional Data

    Uploaded by

    Tony
    This document provides specifications for the 1.69" SS100-G2-F downhole motor. Key details include: 1) The motor has an overall length of 8.6 feet and connections of 1" MT/REG at the top and bottom. It can accommodate bit sizes from 1-7/8 to 2-3/4 inches. 2) The motor can operate continuously at 3,750 pounds of weight on bit and 1,610 pounds of backreaming. Its maximum overpull ratings are 22,000 pounds for the bit and 29,000 pounds for the motor body. 3) The power section operates at a flow range of 20-40 gallons per minute and can

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1.69" SS100-G2-F: Motor Loads General Dimensional Data

    Uploaded by

    Tony
    47 views1 page
    This document provides specifications for the 1.69" SS100-G2-F downhole motor. Key details include: 1) The motor has an overall length of 8.6 feet and connections of 1" MT/REG at the top and bottom. It can accommodate bit sizes from 1-7/8 to 2-3/4 inches. 2) The motor can operate continuously at 3,750 pounds of weight on bit and 1,610 pounds of backreaming. Its maximum overpull ratings are 22,000 pounds for the bit and 29,000 pounds for the motor body. 3) The power section operates at a flow range of 20-40 gallons per minute and can

    Original Description:

    Original Title

    1.69 SS100-G2-F

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the 1.69" SS100-G2-F downhole motor. Key details include: 1) The motor has an overall length of 8.6 feet and connections of 1" MT/REG at the top and bottom. It can accommodate bit sizes from 1-7/8 to 2-3/4 inches. 2) The motor can operate continuously at 3,750 pounds of weight on bit and 1,610 pounds of backreaming. Its maximum overpull ratings are 22,000 pounds for the bit and 29,000 pounds for the motor body. 3) The power section operates at a flow range of 20-40 gallons per minute and can

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    47 views1 page

    1.69" SS100-G2-F: Motor Loads General Dimensional Data

    Uploaded by

    Tony
    This document provides specifications for the 1.69" SS100-G2-F downhole motor. Key details include: 1) The motor has an overall length of 8.6 feet and connections of 1" MT/REG at the top and bottom. It can accommodate bit sizes from 1-7/8 to 2-3/4 inches. 2) The motor can operate continuously at 3,750 pounds of weight on bit and 1,610 pounds of backreaming. Its maximum overpull ratings are 22,000 pounds for the bit and 29,000 pounds for the motor body. 3) The power section operates at a flow range of 20-40 gallons per minute and can

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    1.

    69” SS100-G2-F
    www.bicodrilling.com

    General Dimensional Data Motor: G2 Transmission: Flex Shaft Motor Loads


    A - Overall Motor Length 8.6 ft (2.6 m) Continuous Operation Ultimate Loading
    Common Top Connection 1” MT/REG WOB - lbs (kg) 3,750 (1,700) –
    Common Bottom Connection 1” MT/ REG Backreaming - lbs (kg) 1,610 (730) –
    Recommended Bit Sizes 1-7/8 in to 2-3/4 in (47.6 - 69.9 mm) Bit Overpull* - lbs (kg) 22,000 (9,980) 39,000 (17,690)
    Estimated Weight - Body Overpull* - lbs (kg) 29,000 (13,150) 52,000 (23,590)
    *While Not Operating
    Continuous Loads - Lay motor down if exceeded
    Ultimate Loads - Motor may part if exceeded

    Power Section Specifications Lobes: 5/6


    Flow Range 20 - 40 gpm (76 - 151 lpm) Max Recommended Pressure 600 psi (41.4 bar)
    Speed Ratio 10.82 rev/gal (2.86 rev/l) Torque Slope 0.22 ft-lb/psi (4.33 Nm/bar)
    No Load Bit Speed 216 - 433 rpm Torque @ Max Recommended Pressure 132 ft-lbs (179 Nm)
    A No Load Pressure Drop 300 psi (20.68 bar) Power @ Max Recommended Pressure 10 hp (7 kW)

    Performance Curve
    Rated
    440 160
    40 GPM

    330 120
    Bit Speed (rpm)

    30 GPM

    Torque (ft-lbs)
    220 80
    20 GPM

    110 40

    0 0
    100 200 300 400 500 600 700
    Motor Differential Pressure (psi)
    Disclaimer: The Performance Curve and Performance Data published by BICO Drilling Tools are based on recorded dynamometer data at surface temperature (72 degF) on a standard fit configuration between rotor and stator, with
    clean water, and are presented as a reference to the potential power of the power section and or motor. Downhole conditions such as highly elevated bottom hole temperatures and different drilling/intervention fluids shall require
    adjusted loose fits that may produce reduced power during surface (dynamometer) testing and will achieve the expected torque and speed values when reaching planned conditions. Contact BICO for the adjusted performance curves.
    R1.1

    You might also like