TERM PAPER

MATHS
Name: Kamaldeep Singh

Course: B-tech(Hons) M.E.

Roll No.: A14

Section: A4005

REG. ID: 11011377

DEFINATION

The definite integral is defined to be exactly the limit and summation

that we looked at in the last section to find the net area between a
function and the x-axis.  Also note that the notation for the definite
integral is very similar to the notation for an indefinite integral .There is
also a little bit of terminology that we should get out of the way here.

A definite integral is an integral

(1

with upper and lower limits. If is restricted to lie on the real line, the definite integral is known as a Riemann integral (which is the usual

definition encountered in elementary textbooks). However, a general definite integral is taken in the complex plane, resulting in the contour

integral

(2

with , , and in general being complex numbers and the path of integration from to known as a contour.

The first fundamental theorem of calculus allows definite integrals to be computed in terms of indefinite integrals, since if is the indefinite

integral for a continuous function , then

(3

This result, while taught early in elementary calculus courses, is actually a very deep result connecting the purely algebraic indefinite integral

and the purely analytic (or geometric) definite integral. Definite integrals may be evaluated in Mathematica using Integrate[f, x, a, b ].

The question of which definite integrals can be expressed in terms of elementary functions is not susceptible to any established theory. In

fact, the problem belongs to transcendence theory, which appears to be "infinitely hard." For example, there are definite integrals that are
equal to the Euler-Mascheroni constant . However, the problem of deciding whether can be expressed in terms of the values at rational

values of elementary functions involves the decision as to whether is rational or algebraic, which is not known.

Integration rules of definite integration include

(4

and

The number “a” that is at the bottom of the integral sign is called the
lower limit of the integral and the number “b” at the top of the integral
sign is called the upper limit of the integral

Also, despite the fact that a and b were given as an interval the lower
limit does not necessarily need to be number smaller then the upper
limit.  Collectively we’ll often call a and b the interval of integration

Definite integral is defined informally to be the net signed area of the region in
the xy-plane bounded by the graph of ƒ, the x-axis, and the vertical lines x = a
and x = b.
The term integral may also refer to the notion of anti derivative, a
function F whose derivative is the given function f. In this case, it is called
an indefinite integrals, while the integrals discussed in this article are
termed definite integrals. Some authors maintain a distinction between
anti derivatives and indefinite integrals .

The principles of integration were formulated independently by Isaac

Newton and Leibniz in the late 17th century. Through the fundamental
theorem which they independently developed, integration is connected
with differentiation: if ƒ is a continuous real-valued function defined as
closed interval [a, b], then, once an anti derivative F of ƒ is known, the
definite integral of ƒ over that interval is given by

∫ f ( X ) dx=F ( b )−F (a)

a
 Integrals and derivatives became the basic tools of calculus, with
numerous applications in science and engineering. A rigorous
mathematical definition of the integral was given by reimamm. It is
based on a limiting procedure which approximates the area of a
curvilinear region by breaking the region into thin vertical slabs.
Beginning in the nineteenth century, more sophisticated notions of
integrals began to appear, where the type of the function as well as
the domain over which the integration is performed has been
generalized. A line integral is defined for functions of two or three
variables, and the interval of integration [a, b] is replaced by a
certain curve connecting two points on the plane or in the space. In
a surface integral, the curve is replaced by a piece of a surface in
the three-dimensional space. Integrals of differential forms play a
fundamental role in modern differential geometry. These
generalizations of integral first arose from the needs of physics,
and they play an important role in the formulation of many
physical laws, notably those of electrodynamics. There are many
modern concepts of integration, among these; the most common is
based on the abstract mathematical theory known as Lebesgue
integration, developed by Henri Lebesgue.
 A definite integral of a function can be represented as the signed area of

the region bounded by its graph

PROPERTIES OF DEFINITE INTEGRALS

b b b

1.∫ f ( X ) + g ( X ) dx=∫ f ( X ¿)dx ¿+∫ g ( X ) dx.

a a a

b b

2. ∫ ∝ f ( X ) dx=¿ ∝∫ f ( X ) dx ¿ for any arbitrary α

a a

3. ∫ f ( X ) dx=0
c

a b
4. ∫ f ( X ) dx=−¿ ∫ f ( X ) dx ¿
b a
 b c b
5. ∫ f ( X ) dx=¿ ∫ f ( X ) dx +¿ ∫ f ( X ) dx ¿ ¿
a a c

The property (5) can be easily illustrated by the following picture

APPLICATION
1. WORK DONE BY FORCE

In physics, work is done when a force acting upon an object causes

displacement. (For example, riding bicycle
If the force is not constant, we must use integration to find the work

Done

therefore we use

Where f(x) is a variable force.

.

2.TO FIND DISPLACEMENTOF MOVING OBJECT

If we know the expression, v, for velocity in terms of t, the time, we can

find the displacement of a moving object from time t = a to time t = b by
integration,

Example. Find the displacement of an object from t = 2 to t = 3, if the

velocity of the object at time t is given by

That is, evaluate:

Improper integrals
Main article:  Improper integral
The improper integral

has unbounded intervals for both domain and range.

A "proper" Riemann integral assumes the integrand is defined and finite on a closed and bounded interval, bracketed by the limits of

integration. An improper integral occurs when one or more of these conditions is not satisfied. In some cases such integrals may be

defined by considering the limit of a sequence of proper Riemann integrals  on progressively larger intervals.

If the interval is unbounded, for instance at its upper end, then the improper integral is the limit as that endpoint goes to infinity.

If the integrand is only defined or finite on a half-open interval, for instance (a,b], then again a limit may provide a finite result.

That is, the improper integral is the limit of proper integrals as one endpoint of the interval of integration approaches

either a specified real number, or ∞, or −∞. In more complicated cases, limits are required at both endpoints, or at

interior points.

Consider, for example, the function   integrated from 0 to ∞ (shown right). At the lower bound, as x goes
to 0 the function goes to ∞, and the upper bound is itself ∞, though the function goes to 0. Thus this is a doubly

improper integral. Integrated, say, from 1 to 3, an ordinary Riemann sum suffices to produce a result of   . To

integrate from 1 to ∞, a Riemann sum is not possible. However, any finite upper bound, say  t (with t > 1), gives a well-

defined result,  . This has a finite limit as t goes to infinity, namely  . Similarly, the integral

from 1⁄3 to 1 allows a Riemann sum as well, coincidentally again producing   . Replacing 1⁄3 by an arbitrary positive
value s (with s < 1) is equally safe, giving  . This, too, has a finite limit as s goes to

zero, namely  . Combining the limits of the two fragments, the result of this improper integral is

This process does not guarantee success; a limit may fail to exist, or may be unbounded. For example, over the

bounded interval 0 to 1 the integral of   does not converge; and over the unbounded interval 1 to ∞ the integral
of   does not converge.

It may also happen that an integrand is unbounded at an interior point, in which case the integral must be split

at that point, and the limit integrals on both sides must exist and must be bounded. Thus

But the similar integral

cannot be assigned a value in this way, as the integrals above and below zero do not

independently converge. (However, see Cauchy principal value.)

[edit]Multiple integration
Main article:  Multiple integral
Double integral as volume under a surface.

Integrals can be taken over regions other than intervals. In general, an integral over a set E of a

function f is written:

Here x need not be a real number, but can be another suitable quantity, for instance,

a vector in R3. Fubini's theorem shows that such integrals can be rewritten as an iterated

integral. In other words, the integral can be calculated by integrating one coordinate at a

time.

Just as the definite integral of a positive function of one variable represents the area of the

region between the graph of the function and the x-axis, the double integral  of a positive

function of two variables represents the volume of the region between the surface defined

by the function and the plane which contains itsdomain. (The same volume can be obtained

via the triple integral — the integral of a function in three variables — of the constant

function f(x, y, z) = 1 over the above mentioned region between the surface and the

plane.) If the number of variables is higher, then the integral represents a hypervolume, a

volume of a solid of more than three dimensions that cannot be graphed.

For example, the volume of the cuboid of sides 4 × 6 × 5 may be obtained in two ways:

 By the double integral

of the function f(x, y) = 5 calculated in the region D in the xy-plane which is the base of the cuboid. For example, if a

rectangular base of such a cuboid is given via the xy inequalities 2 ≤ x ≤ 7, 4 ≤ y ≤ 9, our above double integral now

reads

From here, integration is conducted with respect to either  x or y first; in this example, integration is first done with respect

to x as the interval corresponding to x is the inner integral. Once the first integration is completed via the  F(b)

− F(a) method or otherwise, the result is again integrated with respect to the other variable. The result will equate to the
volume under the surface.

 By the triple integral

of the constant function 1 calculated on the cuboid itself.

[edit]Line integrals
Main article:  Line integral

A line integral sums together elements along a

curve.

The concept of an integral can be extended to

more general domains of integration, such as

curved lines and surfaces. Such integrals are

known as line integrals and surface integrals

respectively. These have important applications in

physics, as when dealing with vector fields.

A line integral (sometimes called a path integral)

is an integral where the function to be integrated

is evaluated along a curve. Various different line

integrals are in use. In the case of a closed curve

it is also called a contour integral.

The function to be integrated may be a scalar

field or a vector field. The value of the line integral

is the sum of values of the field at all points on the

curve, weighted by some scalar function on the

curve (commonly arc length or, for a vector field,

the scalar product of the vector field with

a differential vector in the curve). This weighting

distinguishes the line integral from simpler

integrals defined on intervals. Many simple

formulas in physics have natural continuous

analogs in terms of line integrals; for example, the

fact that work is equal to force, F, multiplied by

displacement, s, may be expressed (in terms of

vector quantities) as:

For an object moving along a path in

a vector field   such as an electric

field or gravitational field, the total work

done by the field on the object is obtained

by summing up the differential work done in

moving from   to  . This gives

the line integral

[edit]Surface integrals
Main article:  Surface integral
The definition of surface integral
relies on splitting the surface into
small surface elements.

A surface integral is a definite

integral taken over a surface (which

may be a curved set in space); it can

be thought of as the double

integral analog of the line integral.

The function to be integrated may be

a scalar field or a vector field. The

value of the surface integral is the

sum of the field at all points on the

surface. This can be achieved by

splitting the surface into surface

elements, which provide the

partitioning for Riemann sums.

For an example of applications of

surface integrals, consider a vector

field v on a surface S; that is, for

each point x in S, v(x) is a vector.

Imagine that we have a fluid flowing

through S, such that v(x)

determines the velocity of the fluid

at x. The flux is defined as the

quantity of fluid flowing through S in

unit amount of time. To find the flux,

 we need to take the dot

product of v with the unit surface

normal to S at each point, which will

give us a scalar field, which we

integrate over the surface:

The fluid flux in this example

may be from a physical fluid

such as water or air, or from

electrical or magnetic flux.

Thus surface integrals have

applications inphysics,

particularly with the classical

theory of electromagnetism.

TYPES OF POISONS

An algaecide is a substance used for killing and preventing the growth of

algae. It is placed in mesh bags and floated in fish ponds or water
gardens to help reduce algal growth without harming pond plants and
animals.

ALGAECIDE
AVICIDE

An avicide is any substance which can be used to kill birds. Commonly used avicides include
strychnine, and CPTH, and Avitrol . Chloralose is also used as an avicide. In the past, highly
concentrated formulations of parathion in diesel oil were also used, applied by aircraft spraying
over the nesting colonies of the birds.

FUNGICIDES

Fungicides are chemical compounds or biological organisms used to kill or inhibit fungi or
fungal spores. Fungi can cause serious damage in agriculture, resulting in critical losses of yield,
quality and profit. Fungicides are used both in agriculture and to fight fungal infections in
animals.

Most fungicides that can be bought retail are sold in a liquid form. The most common active
ingredient is sulfur, present at 0.08% in weaker concentrates, and as high as 0.5% for more
potent fungicides. Fungicides in powdered form are usually around 90% sulfur and are very
toxic.

Fungicide residues have been found on food for human consumption, mostly from post-harvest
treatments. Some fungicides are dangerous to human health, such as vinclozolin, which has now
been removed from use.
 FUNGICIDES CROPS DAMAGED BY FUNGICIDE

HERBICIDE

An herbicide, commonly known as a weed killer, is a type of pesticide used to kill unwanted
plants. Selective herbicides kill specific targets while leaving the desired crop relatively
unharmed. Some of these act by interfering with the growth of the weed and are often synthetic
"imitations" of plant hormones.

Herbicides have widely variable toxicity. In addition to acute toxicity from high exposures there
is concern of possible carcinogenicity as well as other long-term problems such as contributing
to Parkinson's Disease.

Some herbicides cause a range of health effects ranging from skin rashes to death. The pathway
of attack can arise from intentional or unintentional direct consumption, improper application
resulting in the herbicide coming into direct contact with people or wildlife, inhalation of aerial
sprays, or food consumption prior to the labeled pre-harvest interval. Under extreme conditions
herbicides can also be transported via surface run off to contaminate distant water sources.
PESTICIDE

Pesticide is any substance or mixture of substances intended for preventing, destroying, repelling
or mitigating any pest. A pesticide may be a chemical substance, biological agent , antimicrobial,
disinfectant or device used against any pest that destroy property, spread disease . Although there
are benefits to the use of pesticides, there are also drawbacks, such as potential toxicity to
humans and other animals. According to the Stockholm Convention on Persistent Organic
Pollutants, 10 of the 12 most dangerous and persistent organic chemicals are pesticides.

Pesticides can enter the human body through inhalation of aerosols, dust and vapor that contain
pesticides; through oral exposure by consuming food and water; and through dermal exposure by
direct contact of pesticides with skin. Pesticides are sprayed onto food, especially fruits and
vegetables, they secrete into soils and groundwater which can end up in drinking water, and
pesticide spray can drift and pollute the air.

The effects of pesticides on human health are more harmful based on the toxicity of the chemical
and the length and magnitude of exposure. Farm workers and their families experience the
greatest exposure to agricultural pesticides through direct contact with the chemicals. But every
human contains a percentage of pesticides found in fat samples in their body. Children are most
susceptible and sensitive to pesticides due to their small size and underdevelopment.

Medicine as poisions
 A drug may be helpful or harmful. The effects of drugs can vary depending upon the kind of
drug taken, how much is taken, how often it is used, how quickly it gets to the brain, and what
other drugs, food, or substances are taken at the same time. Effects can also vary based on the
differences in body size, shape, and chemistry.

Although substances can feel good at first, they can ultimately do a lot of harm to the body and brain.
Drinking alcohol, smoking tobacco, taking illegal drugs, and sniffing glue can all cause serious damage
to the human body. Some drugs severely impair a person's ability to make healthy choices and
decisions. Teens who drink, for example, are more likely to get involved in dangerous situations, such
as driving under the influence or having unprotected sex

EXAMPLE

Alcohol

The oldest and most widely used drug in the world, alcohol is a depressant that alters perceptions,
emotions, and senses. Small amount of alcohol act as a medicine. people feel warm, relaxed and a bit
sleepy. High doses of alcohol seriously affect judgment and coordination. Drinkers may have slurred
speech, confusion, depression, short-term memory loss, and slow reaction times. Large volumes of
alcohol drunk in a short period of time may cause alcohol poisoning.

Cocaine and Crack

Cocaine is a white crystalline powder made from the dried leaves of the coca plant. Crack, named for
its crackle when heated, is made from cocaine. Cocaine is a stimulant that rocks the central nervous
system, giving users a quick, intense feeling of power and energy. Snorting highs last between 15 and
30 minutes; smoking highs last between 5 and 10 minutes. Cocaine also elevates heart rate,
breathing rate, blood pressure, and body temperature. Injecting cocaine can give you hepatitis or
AIDS if you share needles with other users. Snorting can also put a hole inside the lining of your nose.
Both cocaine and crack can stop breathing or have fatal heart attacks. Using either of these drugs
even one time can kill you.

Cough and Cold Medicines (DXM)

Several over-the-counter cough and cold medicines contain the ingredient dextromethorphan. If taken
in large quantities, these over-the-counter medicines can cause hallucinations, loss of sense. Cough
and cold medicines, which come in tablets, capsules, gel caps, and lozenges as well as syrups, are
swallowed. DXM is often extracted from cough and cold medicines, put into powder form, and
snorted.Small doses help suppress coughing, but larger doses can cause fever, confusion, impaired
judgment, irregular heartbeat, high blood pressure, headache. Sometimes users mistakenly take
cough syrups that contain other medications in addition to dextromethorphan. High doses of these
other medications can cause serious injury or death.
Heroin

Heroin comes from the dried milk of the opium poppy, which is also used to create the class of
painkillers called narcotics medicines like codeine and morphine. Heroin can range from a white to
dark brown powder to a sticky, tar-like substance. Heroin gives you a burst of euphoric (high)
feelings, especially if it's injected. This high is often followed by drowsiness, nausea, stomach cramps,
and vomiting. Users feel the need to take more heroin as soon as possible just to feel good again.
With long-term use, heroin ravages the body. It is associated with chronic constipation, dry skin,
scarred veins, and breathing problems. Users who inject heroin often have collapsed veins and put
themselves at risk of getting deadly infections such as HIV, hepatitis B or C, and bacterial endocarditic
(inflammation of the lining of the heart) if they share needles with other users.

Ketamine
Ketamine hydrochloride is a quick-acting anesthetic that is legally used in both humans (as a sedative
for minor surgery) and animals (as a tranquilizer). At high doses, it causes intoxication and
hallucinations similar to LSD. Ketamine usually comes in powder. Users may become delirious,
hallucinate, and lose their sense of time and reality. Users may become nauseated or vomit, become
delirious, and have problems with thinking or memory. At higher doses, ketamine causes movement
problems, body numbness, and slowed breathing.

KETAMINE POWDERED KETAMINE

Nicotine
Nicotine is a highly addictive stimulant found in tobacco. This drug is quickly absorbed into the
bloodstream when smoked. It gets people hooked on cigarettes, but researchers hope that nicotine and
related compounds will have therapeutic uses.

Nicotine is rightly reviled because of its associations with smoking and addiction. But the rogue substance
has a wide range of effects on the brain. Nicotine is typically smoked in cigarettes or cigars. Some
people put a pinch of tobacco into their mouths and absorb nicotine through the lining of their mouths.
Physical effects include rapid heartbeat, increased blood pressure, shortness of breath, and a greater
likelihood of colds and flu .Nicotine users have an increased risk for lung and heart disease and stroke.
Smokers also have bad breath and yellowed teeth. Chewing tobacco users may suffer from cancers of
the mouth and neck
CIGARETTES CONTAINING NICOTINE STRUCTURE OF NICOTINE