Enzymatic Membrane Bioreactors and Their Applications
Enzymatic Membrane Bioreactors and Their Applications
Enzymatic Membrane Bioreactors and Their Applications
The basic concepts, advantages, problems, and applications of enzymatic membrane reactors are reviewed. A broad
classification of this type of reactor is proposed based on the type of contact between enzyme and substrates that occurs
in these devices. Applications of membrane reactors for enzymatic reactions published in the scientific literature in the
last decade are presented and discussed. Some comments on the state of the art and future prospects of this area are
also outlined.
Semipermeable Size exclusion 1s-19 Solution Sieving 81,82 Plate and frame 32 Ceramic 25,41,44
barrierS0,81 (free) 54
Immobilization Electrostatic Solution Solution Tubular 44 Cellulose 37,39
matrix 7-10 repulsion20, 21 (enlarged) 24 diffusion 16,18
Phase Electrostatic Membrane matrix Precipitation 4~ Hollow Fibers TM Nylon 26
separator 11-13,32 attraction 7,8
Physical Membrane surface 31 Electrical charge b Spiral w o u n d 1° Polypropylene 1°,32
adsorption 10,30-36
Chemical Dynamic module b Polyamide 15,1°°
binding 25-29
Enlargement 22-24 Ultrafiltration Polysulfone 24,54,8°
cell~5 Polytetrafluor-
ethylene7, TM
Cellulose acetate 73
Direct contact membrane reactors Figure 1 Direct contact membrane reactors: (a) CSTR recycle, (b)
dead-end and (c) dialysis membrane reactors. O, Enzyme; S, sub-
A first type of membrane reactor promotes what might be strate; P, product
called direct contact between the enzymes and the sub-
strate (i.e., substrates are introduced on the side of the
membrane containing the enzyme). In this type of reactor, A recycle membrane reactor is typically formed by a
soluble enzymes can act directly on the substrate as soon as stirred vessel coupled to an ultrafiltration module in a semi-
it enters the system. The enzyme may be either immobilized closed loop configuration (see Figure la). The enzymatic
or in the free form. This class of reactors can be further solution (if adsorption of the enzyme is not present), to-
divided into recycle, dead-end, and dialysis reactors (Table gether with the substrate, is continuously recycled from and
2). Table 5 lists several applications of direct contact mem- to the vessel through the ultrafiltration unit. If the enzyme is
brane reactors described in the literature. immobilized on the membrane surface (or interior), exter-
nal diffusional limitations can be reduced by high recycling
flow rates. 26 The membrane modules commonly used in
this type of reactor include tubular membranes and hollow
Table 2 Classification of membrane reactors based on the mecha- fibers. In spite of the presence of a membrane module,
nism by which enzymes and substrates establish contact (see Fig- studies on the residence time distribution in these recycle
ures 1-3 for a complete description of each subclass)
reactors indicate that the whole system can be considered
as a single entity behaving like an ideal CSTR. 5a-53 This
Contact by configuration is widely used and referred to in the
Direct contact diffusion Interracial contact literature. 22,26,35,36,41,44,45,51-56
Dead-end membrane reactors, which include the wide-
Recycle Single pass Dual single-pass
Dead-end Single-pass/recycle Single-pass/recycle spread ultrafiltration cells, are also included in this class. In
Dialysis Dual-recycle Dual-recycle this case, separation and reaction occur in the same com-
partment and the reaction media is pressurized against the
Advantages Disadvantages
(Figure 2a and b) or, alternatively, be recirculated using an productivity and possibly to the economic viability of the
external vessel 16,75 (Figure 2c). process. This is common to all continuous reactors when
compared to batch systems.
Multiphase membrane reactors Other important advantages stem from the continuous
Finally, multiphase membrane reactors are included in a selective removal of products from the reaction media. For
class of reactors capable of promoting interfacial contact instance, in those cases where chemical equilibrium affects
between enzyme and substrates at the membrane matrix the yield of reactions, a selective separation of products
(Figure3). Substrates and products may be located in either against the substrates (i.e., the substrate is retained behind
phase, and diffusion is again the dominant transport mech- the membrane in a higher degree when compared to the
anism together with interracial transport. In these cases, the product) can contribute to a favorable shift of the equilib-
membrane usually acts as a support for the interface be- rium towards the product side. 79
tween two distinct liquid phases (polar and apolar) that There is also the generalized idea that in membrane
constitute reservoirs for substrates and/or products. The reactors, as opposed to batch reactors, higher conversion
hydraulic pressure caused by circulation of the two phases and reaction rates can be obtained as a result of the contin-
is, in principle, sufficient to maintain a good phase separa- uous removal of inhibitory products from the reaction me-
tion at the membrane. 78 In some cases, a slight positive dia through the membrane pores. 15,79
pressure may have to be applied in order to keep the inter- Membrane reactors may display additional advantages
face in the plane of the membrane and prevent the phases in multiproduct systems. In such cases, if the membrane
from mixing. exhibits some selectivity toward the products, an enrich-
Figure 3 represents three different configurations, in the ment of the product that is less rejected can be obtained in
multiphase membrane reactor class, for a hypothetical case the outlet process stream.t1 On the other hand, if a product
of a two-substrate, two-product reaction. Each of the pro- is rejected by the membrane, it can be concentrated inside
cess streams adjacent to the membrane may flow through the system. This may be disadvantageous if product inhibi-
the module in a single pass 31-33,4° (Figure 3a) or be recircu- tion is present.
lated with external vessels 12,3° (Figure 3c). Configurations One of the early-recognized advantages of membrane
with a single pass of one of the streams and recirculation of reactors was detected in the hydrolysis of macromolecules.
the other are also used 34 (Figure 3b). The membrane not In these cases, a membrane with the correct cutoff usually
only separates the two immiscible phases but also provides permits some control of the molecular weight of the hydrol-
interfacial contact area and, together with the enzyme, acts yzates; this leads to an increase in lower-molecular-weight
as an interfacial catalyst. These multiphase membrane re- components in the permeate stream and to a concentration
actors have been mostly used, and seem specially indicated of the heavier products behind the membrane.l.8°-82
when interfacial activation is needed for the enzyme action As already mentioned above, membrane reactors also
(e.g., lipases and phospholipases). Table 7 lists several ap- offer the possibility of conducting two-phase reactions,
plications that have been described in the literature. without the emulsification problems, namely, the inactiva-
tion of the enzyme related to the intensive agitation neces-
Advantages and disadvantages of membrane reactors sary to make and maintain emulsions and the high power
requirements (hence, energy costs).
Advantages At a laboratory scale, ultrafiltration membrane reactors
Membrane reactors have several intrinsic advantages that have also proved themselves as a useful research tool for the
make them a possible alternative system when compared study of phenomena related to enzyme mechanisms, such
with other, more conventional, enzymatic reactors (e.g., as reaction kinetics, product inhibition effects, and enzyme
batch, fixed, and fluidized beds) (see Table 3). deactivation processes. 48,57,83
One of the great advantages of membrane reactors is The use of a membrane as an immobilization technique
undoubtedly the possibility of a continuous, and thus inten- presents advantages compared to enzyme supports, such as
sive, use of enzymes, which contributes to an increase in porous particles or beads, that may overcome the higher
~
brane reactor can be affected by several factors apart from
thermal inactivation of the enzyme. 51 For instance, enzyme
1"1 leakage may occur depending on the form of the enzyme
molecules and distribution of pore size, even when the mo-
lecular weight of the enzyme is higher than the membrane
UTunit cutoff. This loss of enzyme causes a gradual decrease in the
activity (if the enzyme is not present in excess). 8°,85 Small
enzyme activators, such as metal ions or cofactors, 59,63 may
also escape through the membrane, with consequent de-
crease in enzymatic activity. 51 In such cases, supplementa-
tion of the component leaking must be provided.
When the enzyme is used in a free form, unfavorable
adsorption to the membrane, with eventual alterations in
the enzyme conformation, may contribute to a decrease in
c) P2 activity. Even if no structural changes occur, the enzyme
may be poisoned upon contact with the membrane. This
means that the type of membrane material may influence
the stability of the enzyme. 46,48
Enzyme molecules in ultrafiltration systems and mem-
1"1 brane reactors are subjected to shear forces and friction
generated near the walls. This shear is claimed to cause
inactivation due to the sometimes observed correlation of
decrease in activity with increase in recirculating rates. 26,86
'l UT unit However, there is evidence that secondary effects occurring
together with high shear fields (e.g., interfacial inactivation,
adsorption, local heating, air entrainment) are important
and connected to the observed deactivation. 86- 88 These ef-
fects may be significant in recycle reactors that usually
Figure 3 Multiphase membrane reactors: (a) dual single-pass, (b)
single-pass/recycle, and (c) dual-recycle 0, Enzyme; $1, $2, sub- operate with high recirculating flow rates. In the case of
strates; P1, P2, products membrane reactors using stirrers, shearing-related ef-
fects associated with rotation may also contribute to
deactivation. 48
The usual enzyme inhibition caused by products and
substrates may be increased in membrane reactors using
costs usually associated with membranes. 84 Some of the enzymes immobilized on the membrane surface, due to
advantages are related to the separating possibilities of- gradual accumulation of these species in the form of a gel
fered by a membrane reactor, which permit an integration layer adjacent to the membrane.
of the catalytic process with separating steps. Furthermore, Whenever a decrease in operational kinetic stability
in certain membrane reactor configurations, mass transfer caused by one of the factors listed above is present, fresh
limitations that often occur in conventional fixed- or enzyme should be added to maintain constant productivity
fluidized-bed reactors due to diffusion in particles can be in the reactor.
reduced, since it is possible to operate the system with con- The loss of mass transfer efficiency (convection or diffu-
vective mechanisms rather than diffusive ones. In this way, sion) during the separation processes can also limit the use
to be retained by the membrane, 21,45,63,91,92,95,96 immobi- phogluconate, 7° lactate, 63,7° aldehydes, and lactones. 94 A
lized by size exclusion 97 or electrostatic repulsion, 2°,21,59 or large-scale process was even developed at DEGUSSA AG for
used as a permeable solute by immobilized enzyme. 17-19,70 the production of L-alanine from pyruvic acid catalyzed by
These cofactor-regenerating membrane reactors were I.-alanine dehydrogenase, with N A D + being regenerated back
used for the production of several different compounds: to N A D H by using formate dehydrogenase. 45 In this case
NADPH, 58 amino acids, 19.45 . . .91 94 95 hydroxyacids,92.94
, alco- N A D H was maintained in the system by increasing
hols, 20,21,70,94 acids, 45,65,97 glucose-6phosphate, 17,18,96 6-phos- its molecular weight upon binding to PEG. This use of
Table 7 Applications in multiphase membrane reactors (in chronological order starting from the oldest)
Flat sheet membrane Production of glycerol and fatty acids by the hydrolysis of olive oil catalyzed by lipase 32,102
Hollow fibers Production of glycerol and fatty acids by the hydrolysis of lipids catalyzed by lipase 33,40,78,101
Flat sheet membrane Phosphatidylglycerol synthesis catalyzed by phospholipase D 104
Flat sheet membrane Synthesis of glycerides catalyzed by lipase 34
Flat sheet membrane Production of glycerol and fatty acids by the hydrolysis of tallow catalyzed by lipase 103
Hollow fibers Synthesis of (R)-glycidol by the lipase-catalyzed resolution of racemic glycidyl butyrate 12
Hollow fibers Hydrolysis of the alkyl ester ethyl butyrate catalyzed by porcine liver esterase 12
Hollow fibers Synthesis of n-butyl oleate catalyzed by lipase 30
Hollow fibers Hydrolysis of triacetin catalyzed by lipase 100
Hollow fibers Resolution of a racemic mixture of N-benzoyl tyrosine ethyl ester by (x-chymotrypsin 13
Flat sheet membrane Hydrolysis of butter oil catalyzed by lipase 31
Hollow fibers Esterification of sorbitol and fatty acids catalyzed by lipase 39
Hollow fibers Synthesis of mono-, di-, and triglycerides catalyzed by lipase 37,38,79
Flat sheet membrane Hydrolysis of soybean oil by lipase in a reactor with 2 different membranes 99
membrane reactors as a process strategy for regenerating research effort (scientific and economic) that has been
cofactors has permitted cycle numbers (defined as the num- devoted to these enzymes in recent years, the particular
ber of product molecules per cofactor molecule) as high as structure and unusual mode of action of lipases is also re-
500,000 (reported by Wandrey 93). sponsible for this trend. The fact that lipases are activated
Many of the membrane reactor systems developed for co- by, and act at, interfaces probably makes them the perfect
factor regeneration use two l7-2070.929697
, , , , or even three 6591 , biocatalyst to use in membrane reactors, and particularly in
enzymes acting synergistically. This possibility of easily immo- multiphase membrane reactors, which promote interracial
bilizing different enzyme molecules is a particularly attrac- contact between enzymes and substrate (see Table 7).
tive feature of membrane reactors for the conduction of The majority of the examples deal eitherwith the hydrolysis
enzyme-catalyzed sequential reactions. Some authors have of lipids and fats for the production of fatty acids, mono- and
described further applications (other than cofactor regen- diglycerides, and glycerol 10,31-33,35,36,40,44,55,60,67,7s,99-103 or
erating) of membrane reactors using the conjugated ac- with the synthesis of esters, 30'34'37-39'79including transesterifi-
tion of two enzymes. Kragl and co-workers 98 used an epi- cation reaction~ 24,1°4
merase for the isomerization of N-acetylglucosamine to Usually in these reactors, the lipid (or organic) phase is
N-acetylmannosamine, which was then further converted passed in one side of the membrane, while a buffer solution
to the final product, N-acetylneuraminic acid, by the addi- flows tangentially on the other side. The membrane will
tion of pyruvic acid catalyzed by a lyase. Membrane reac- become wetted by the lipid phase if the membrane material
tors using two enzymes, 13-amylase/isoamylase54 and is hydrophobic, or by the aqueous phase if it is hydrophilic,
et-amylase/glucoamylase, 28were also investigated for the pro- and the reaction then takes place at the interface. The
duction of maltose syrups from starch. lipase may be immobilized on either side of the membrane.
Tanigaki and co-workers 99 developed a slightly different
Hydrokysis and synthesis catalyzed by lipases approach by using two different types of flat membranes in
the reactor: hydrophilic and hydrophobic. The hydrolysis
A significant number of the recent applications of mem- of soybean oil was conducted in an enzyme chamber sep-
brane enzyme reactors (see Tables 5 and 7) use lipases. arated by the two membranes, with water permeating
Although this fact might be a consequence of the large from one side through the hydrophilic membrane and oil