15kV ESD Protected 5V RS-232 Transceiver: Feature Summary

ST207E
± 15kV ESD protected 5V RS-232 transceiver
Feature summary
■ ESD protection for RS-232 i/o pins: ±15 kV
human body model
■ 230kbps data rate
■ Guaranteed slew rate 3V/ms (min) SOP
■ Operates from a single 5V power supply
■ Packaged in SO-24, SSO-24 and TSSOP24
Description
The ST207E is a 5 driver and 3 receiver devices
designed for RS-232 and V.28 communications in SSOP TSSOP
harsh environments. Each transmitter output and
receiver input is protected against ±15KV
electrostatic discharge (ESD) shocks. The drivers
and receivers of the ST207E meet all EIA/TIA- .
232E and CCITT V.28 specifications at data rates
up to 120Kbps, when loaded in accordance with
the EIA/TIA-232E specification.
The ST207E operates with four 0.1µF capacitors.
It came in 24-pin SO and TSSOP packages.
Order codes
Temperature
Type Package Comments
Range
ST207ECDR 0 to 70 °C SO-24 (Tape & Reel) 1000 parts per reel
ST207ECPR 0 to 70 °C SSOP-24 (Tape & Reel) 1350 parts per reel
ST207EBPR -40 to 85 °C SSOP-24 (Tape & Reel) 1350 parts per reel
ST207ECTR 0 to 70 °C TSSOP24 (Tape & Reel) 2500 parts per reel
ST207EBTR -40 to 85 °C TSSOP24 (Tape & Reel) 2500 parts per reel
ST207EATR -40 to 125 °C TSSOP24 (Tape & Reel) 2500 parts per reel
March 2006 Rev. 14 1/17

www.st.com 17
ST207E
Contents
1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
ST207E Pin configuration
1 Pin configuration
Figure 1. Pin connections (top view)
Table 1. Pin description

PlN N° SYMBOL NOTE
1 T3OUT RS-232 driver output

4 R1IN RS-232 receiver input
5 R1OUT TTL/CMOS receiver output
6 T2IN TTL/CMOS Driver input internal pull-up to VCC
7 T1IN TTL/CMOS driver input internal pull-up to VCC
8 GND Ground
9 VCC 4.75V to 5.25V supply voltage
10 C1+ Terminal for positive charge-pump capacitor
11 V+ 2VCC Generated by the charge-pump
12 C 1- Terminal for negative charge-pump capacitor
13 C2+ Terminal for positive charge-pump capacitor
14 C 2- Terminal for negative charge-pump capacitor
15 V- -2VCC Generated by the charge-pump
16 R3IN RS-232 Receiver input
3/17
Pin configuration ST207E
Table 1. Pin description

PlN N° SYMBOL NOTE

23 R2IN RS-232 receiver input
4/17
ST207E Maximum ratings
2 Maximum ratings
Table 2. Absolute maximum ratings

Symbol Parameter Value Unit
VCC Supply voltage -0.3 to 6 V

V+ Extra positive voltage (VCC - 0.3) to 14 V
V- Extra negative voltage -14 to 0.3 V
TIN Transmitter input voltage range -0.3 to (VCC + 0.3) V
RIN Receiver input voltage range ± 30 V
TOUT Transmitter output voltage range (V- - 0.3) to (V+ + 0.3) V
ROUT Receiver output voltage range -0.3 to (VCC + 0.3) V
TSHORT Short circuit duration on tout Continuous
TSTG Storage temperature range -65 to 150 °C
Note: Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these condition is not implied. V+ and V- can have a
maximum magnitude of +7V, but their absolute addition can not exceed 13 V.
5/17
Electrical characteristics ST207E
3 Electrical characteristics
Table 3. ESD Performance: transmitter outputs, receiver inputs

Symbol Parameter Test Min. Typ. Max. Unit
ESD ESD Protection voltage Human body model ± 15 KV

ESD ESD Protection voltage IEC-1000-4-2 Contact discharge ±8 KV
Table 4. Electrical characteristics

(C1 - C4 = 0.1µF, VCC = 5V ± 5%, TA = min. to max., unless otherwise specified. Typical
values are referred to TA = 25°C).
ISUPPLY VCC Power supply current No Load, TA = 25°C 2 5 mA
Table 5. Transmitter electrical characteristics

VTOUT Output voltage swing All Driver loaded with 3KΩ to GND ±5 ± 8.5 V
ROUT Transmitter output resistance VCC = V+ = V- = 0V VOUT = ± 2V 300 Ω
ISC Output short circuit current ± 18 ± 60 mA
IIL Input pull-up current TIN = 0V 15 200 µA
VTIL Input logic threshold low 0.8 V
VTIH Input logic threshold high 2 V
Table 6. Receiver electrical characteristics

Receiver input voltage

VRIN -30 30 V
operating range
VRIL Input threshold low TA = 25°C VCC = 5V 0.8 1.2 V
VRIH Input threshold high TA = 25°C VCC = 5V 1.7 2.4 V
VRIHYS Input hysteresis VCC = 5V, no hysteresis in shutdown 0.2 0.5 1 V
RRIN Input resistance TA = 25°C VCC = 5V 3 5 7 KΩ
VOL Output voltage low 0.4 V
VOH Output voltage high IOUT = -1mA 3.5 VCC-0.4 V
6/17
ST207E Electrical characteristics
Table 7. Timing characteristics

RL = 3KΩ to 7KΩ
CL= 50pF to 1000pF 150 240 Kbps
DR Maximum data rate one transmitter switching
RL = 3KΩ to 7KΩ CL= 50pF to 150pF
230 300 Kbps
one transmitter switching
tPHLR Receiver propagation
All drivers loaded with 3KΩ to GND 0.2 10 µs
tPLHR delay
tPHLT Transmitter propagation RL = 3KΩ CL= 2500pF
2 3 µs
tPLHT delay All transmitter loaded
TA = 25°C RL = 3 to 7KΩ VCC = 5V
Transition-region slew
SR CL = 50pF to 1000pF measured from 3 7 30 V/µs
rate
+3V to -3V or -3V to +3V
7/17
Typical application ST207E
4 Typical application
Figure 2. Application circuit
Table 8. Capacitance value (µF)

C1 C2 C3 C4 C5
0.1 0.1 0.1 0.1 0.1
8/17
ST207E Package mechanical data
5 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK ®

packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
9/17
Package mechanical data ST207E
SO-24 MECHANICAL DATA
mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 2.35 2.65 0.093 0.104
A1 0.1 0.30 0.004 0.012
B 0.33 0.51 0.013 0.020
C 0.23 0.32 0.009 0.013
D 15.20 15.60 0.598 0.614
E 7.4 7.6 0.291 0.299
e 1.27 0.050
H 10.00 10.65 0.394 0.419
h 0.25 0.75 0.010 0.030
L 0.4 1.27 0.016 0.050
k 0° 8° 0° 8°
ddd 0.100 0.004
0070769C
10/17
SSOP24 MECHANICAL DATA
mm. inch
DIM.
A 2 0.079
A1 0.05 0.002
A2 1.65 1.75 1.85 0.065 0.069 0.073
b 0.22 0.38 0.009 0.015
c 0.09 0.25 0.004 0.010
D 7.9 8.2 8.5 0.311 0.323 0.335
E 7.4 7.8 8.2 0.291 0.307 0.323
E1 5.00 5.3 5.6 0.197 0.209 0.220
e 0.65 BSC 0.0256 BSC
K 0˚ 8˚ 0˚ 8˚
L 0.55 0.75 0.95 0.022 0.030 0.037
A A2
K L
A1 b e E
c
E1
PIN 1 IDENTIFICATION
1
0053237/C
11/17
TSSOP24 MECHANICAL DATA
mm. inch
DIM.
A 1.1 0.043
A1 0.05 0.15 0.002 0.006
A2 0.9 0.035
b 0.19 0.30 0.0075 0.0118
c 0.09 0.20 0.0035 0.0079
D 7.7 7.9 0.303 0.311
E 4.3 4.5 0.169 0.177
e 0.65 BSC 0.0256 BSC
H 6.25 6.5 0.246 0.256
K 0° 8° 0° 8°
L 0.50 0.70 0.020 0.028
A A2
K L
A1 b e H
c
PIN 1 IDENTIFICATION
1
7047476B
12/17
Tape & Reel SO-24 MECHANICAL DATA
mm. inch
DIM.
A 330 12.992
C 12.8 13.2 0.504 0.519
D 20.2 0.795
N 60 2.362
T 30.4 1.197
Ao 10.8 11.0 0.425 0.433
Bo 15.7 15.9 0.618 0.626
Ko 2.9 3.1 0.114 0.122
Po 3.9 4.1 0.153 0.161
P 11.9 12.1 0.468 0.476
13/17
Tape & Reel SSOP24 MECHANICAL DATA
mm. inch
DIM.
A 330 12.992
C 12.8 13.2 0.504 0.519
D 20.2 0.795
N 60 2.362
T 22.4 0.882
Ao 8.4 8.6 0.331 0.339
Bo 8.7 8.9 0.343 0.351
Ko 2.9 3.1 0.114 0.122
Po 3.9 4.1 0.153 0.161
P 11.9 12.1 0.468 0.476
14/17
Tape & Reel TSSOP24 MECHANICAL DATA
mm. inch
DIM.
A 330 12.992
C 12.8 13.2 0.504 0.519
D 20.2 0.795
N 60 2.362
T 22.4 0.882
Ao 6.8 7 0.268 0.276
Bo 8.2 8.4 0.323 0.331
Ko 1.7 1.9 0.067 0.075
Po 3.9 4.1 0.153 0.161
P 11.9 12.1 0.468 0.476
15/17
Revision history ST207E
6 Revision history
Table 9. Revision history

Date Revision Changes
09-Feb-2005 13 Mistake on Table 1.

14-Mar-2006 14 Order codes has been updated and new template.
16/17
ST207E
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17

15kV ESD Protected 5V RS-232 Transceiver: Feature Summary

Uploaded by

Copyright:

Available Formats

15kV ESD Protected 5V RS-232 Transceiver: Feature Summary

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

15kV ESD Protected 5V RS-232 Transceiver: Feature Summary

Uploaded by

Copyright:

Available Formats

ST207E

± 15kV ESD protected 5V RS-232 transceiver

March 2006 Rev. 14 1/17

5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 1. Pin connections (top view)

Table 1. Pin description

1 T3OUT RS-232 driver output

Table 1. Pin description

18 T3IN TTL/CMOS driver input internal pull-up to VCC

Table 2. Absolute maximum ratings

VCC Supply voltage -0.3 to 6 V

Table 3. ESD Performance: transmitter outputs, receiver inputs

ESD ESD Protection voltage Human body model ± 15 KV

Table 4. Electrical characteristics

ISUPPLY VCC Power supply current No Load, TA = 25°C 2 5 mA

Table 5. Transmitter electrical characteristics

Table 6. Receiver electrical characteristics

Receiver input voltage

Table 7. Timing characteristics

Figure 2. Application circuit

Table 8. Capacitance value (µF)

0.1 0.1 0.1 0.1 0.1

5 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK ®

SO-24 MECHANICAL DATA

A 2.35 2.65 0.093 0.104

A1 0.1 0.30 0.004 0.012

B 0.33 0.51 0.013 0.020

C 0.23 0.32 0.009 0.013

D 15.20 15.60 0.598 0.614

E 7.4 7.6 0.291 0.299

H 10.00 10.65 0.394 0.419

h 0.25 0.75 0.010 0.030

L 0.4 1.27 0.016 0.050

ddd 0.100 0.004

SSOP24 MECHANICAL DATA

A2 1.65 1.75 1.85 0.065 0.069 0.073

b 0.22 0.38 0.009 0.015

c 0.09 0.25 0.004 0.010

D 7.9 8.2 8.5 0.311 0.323 0.335

E 7.4 7.8 8.2 0.291 0.307 0.323

E1 5.00 5.3 5.6 0.197 0.209 0.220

e 0.65 BSC 0.0256 BSC

L 0.55 0.75 0.95 0.022 0.030 0.037

TSSOP24 MECHANICAL DATA

A1 0.05 0.15 0.002 0.006

b 0.19 0.30 0.0075 0.0118

c 0.09 0.20 0.0035 0.0079

D 7.7 7.9 0.303 0.311

E 4.3 4.5 0.169 0.177

e 0.65 BSC 0.0256 BSC

H 6.25 6.5 0.246 0.256

L 0.50 0.70 0.020 0.028

Tape & Reel SO-24 MECHANICAL DATA

C 12.8 13.2 0.504 0.519

Ao 10.8 11.0 0.425 0.433

Bo 15.7 15.9 0.618 0.626

Ko 2.9 3.1 0.114 0.122

Po 3.9 4.1 0.153 0.161