Midterm Exam in Fire Technology and Arson Investigation
Midterm Exam in Fire Technology and Arson Investigation
Midterm Exam in Fire Technology and Arson Investigation
301. Product of combustion which combustible materials and oxidizing agents react
to heat.
a. Fire c. Smoke
b. Fire Gases d. Flame
302. Means employed to avoid the occurrence of fire.
a. Fire Suppression c. Fire Inspection
b. Fire Control d. Fire prevention
303. Fires involving flammable liquids.
a. Class C c. Class D
b. Class B d. Class A
304. Caused by volcanic eruption or humidity.
a. Providential fire c. Unnatural fire
b. Intentional fire d. Accidental fire
305. Fire stage that has the highest rate of intensity.
a. Incipient c. Smoldering
b. Free burning d. Initial
306. Decomposition of matter in reaction to heat.
a. Thermal balance c. Burning
b. Oxidation d. Pyrolysis
307. Composed of tiny solid particles.
a. Fire gases c. Smoke
b. Flames d. Heat
308. Means employed to pacify the fire.
a. Fire prevention c. Fire control
b. Fire safety d. Fire suppression
309. Rate of temperature of fire.
a. Heat c. Magnitude
b. Intensity d. Ignition point
310. It is performed to assess the safety of an installation from destructive fires.
a. Fire control c. Fire prevention
b. Fire safety d. Fire inspection
311. Known as the “Fire Code of the Philippines”.
a. RA 6975 c. RA 9514
b. RA 9263 d. PD 1613
312. Known as the 4th element of fire.
a. Fuel c. Uninhibited chemical reaction
b. Heat d. Oxygen
313. Heat transfer that occurs in fluids.
a. Convection c. Conduction
b. Radiation d. Electrolysis
314. The means employed to keep the fire to a minimum or manageable level.
a. Fire control c. Fire suppression
b. Fire prevention d. Fire inspection
315. It refers to the size of fire which is determined by the size of flame and the area
of fuel that is burning.
a. Temperature c. Intensity
b. Heat d. Magnitude
316. An act of removing fire hazards from the building.
a. Lien c. Inspection
b. Abatement d. Renovation
317. Normal pattern or movement of fire, smoke and fire gases within a building or
structure or natural condition created by fire.
a. Thermal balance c. Fire turbulence
b. Thermal imbalance d. Fire direction
318. Office of the BFP that facilitates the implementation of the Fire Code of the
Philippines.
a. Fire Investigation Section c. Fire Safety inspection Section
b. Fire Safety Enforcement Branch d. Personnel Section
319. The process of determining the cause of fire in a particular installation.
a. Fire safety c. Fire investigation
b. Fire inspection d. Fire control
320. The first to be observed in ascertaining the cause of fire.
a. The point of origin c. The room of origin
b. The burnt pattern of ceiling d. The color of smoke and flame
321. Place in the fire scene where the fire started.
a. Kitchen c. Electrical Wire
b. Point of origin d. None
322. The burnt pattern in woods indicating the spontaneous and intensive burning
has occurred.
a. Alligatoring c. Collapse
b. Discoloration d. Charring
323. Which of the following should be performed first in conducting fire
investigation?
a. Secure the fire scene c. Pacify the fire
b. Photograph the facade d. Conduct search