Specification FOR Approval: Title 14.0" HD TFT LCD

Global LCD Panel Exchange Center www.panelook.
com
LP140WH7
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ୛ ) Final Specification
Title 14.0” HD TFT LCD
Customer Acer SUPPLIER LG Display Co., Ltd.
MODEL *MODEL LP140WH7

Suffix TSA1
*When you obtain standard approval,
please use the above model name without suffix
APPROVED BY SIGNATURE APPROVED BY SIGNATURE
Do Young Kim / Manager

/
REVIEWED BY
/
Dong Yong Kim / Engineer
/ PREPARED BY
D. H. Do / Engineer
K. T. Baek / Engineer
Please return 1 copy for your confirmation with Products Engineering Dept.
your signature and comments. LG Display Co., Ltd
Ver. 1.0 Apr. 09. 2012 1/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP140WH7
Contents
No ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTREISTICS 6
3-2 INTERFACE CONNECTIONS 7
3-3 esp. SIGNAL TIMING SPECIFICATION 8
3-4 SIGNAL TIMING SPECIFICATIONS 9
3-5 SIGNAL TIMING WAVEFORMS 9
3-6 COLOR INPUT DATA REFERNECE 10
3-7 POWER SEQUENCE 11
4 OPTICAL SFECIFICATIONS 12-14
5 MECHANICAL CHARACTERISTICS 15-17
6 RELIABLITY 18
7 INTERNATIONAL STANDARDS
7-1 SAFETY 18
7-2 EMC 18
7-3 Environment 18
8 PACKING
8-1 PACKING FORM 19-20
9 PRECAUTIONS 21-22
A APPENDIX. Enhanced Extended Display Identification Data 23-25
Ver. 1.0 Apr. 09. 2012 2/25
LP140WH7
RECORD OF REVISIONS
EDID
Revision No Revision Date Page Description
ver.
0.0 Sep. 5. 2011 - First Draft (Preliminary Specification)
0.1 Oct. 11. 2011 13 Update Power sequence
18 Update Mechanical Characteristics
20 Update General tolerance
0.2 Dec.29.2011 17-18 Update Mechanical drawing
0.3 Jan.19.2012 12 Update note about power sequence
0.4 Jan.31.2012 13 Update Optical Specification
24-26 Update EDID
0.5 Feb.23.2012 6 Update Electrical Characteristics
0.6 Mar.30.2012 11 Update Optical Specification
13 Update Gray scale specification
1.0 Apr.09.2012 Final CAS 1.0
Ver. 1.0 Apr. 09. 2012 3/25
LP140WH7
1. General Description
The LP140WH7 is a Color Active Matrix Liquid Crystal Display with an internal LED backlight system. The
matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in
the normally white mode. This TFT-LCD has 14.0 inches diagonally measured active display area with HD
resolution (1366 horizontal by 768 vertical pixel array). Each pixel is divided into Red, Green and Blue sub-
pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is
determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144
colors. The LP140WH7 has been designed to apply the interface method that enables low power, high
speed, low EMI. The LP140WH7 is intended to support applications where thin thickness, low power are
critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-
pixels, the LP140WH7 characteristics provide an excellent flat display for office automation products such
as Notebook PC.
‫ڳڰڜ‬ 1366
esp.
esp. Timing
TimingControl
Control 1
esp. (Tcon)
1Lane (Tcon)Block
Block
User connector
TFT-LCD Panel
(HD, GIP, TN)
EP
DVCC
I
TCLKs
768
30
Power DVCC, AVDD
Pin
VCC Power
VGH, VGL, GMA Source Driver
Block
Block (Bottom)
GIP CLKs, DSC
VOUT_LED
FB1~3
LED Backlight Ass’y
Control & Data Power EDID signal & Power
General Features
Active Screen Size 14.0 inches diagonal
1) Panel (W/O PCB) : 324.0(H, Typ.) Ý 200.2(V, Typ.) [mm]
Outline Dimension
2) Panel (With PCB) : 324.0(H, Typ.) Ý 213.0(V, Typ.) [mm]
Pixel Pitch 0.2265mm Ý 0.2265 mm
Pixel Format 1366 horiz. by 768 vert. Pixels RGB strip arrangement
Color Depth 6-bit, 262,144 colors
Power Consumption Total 3.1 W (Typ.) Logic : 0.75 W (Typ.@ Mosaic), B/L : 2.35 W
Luminance, white 200cd/m2 (Typ. 5 point)
Weight 320 g (Max.)
Display Operating Mode Transmissive mode, normally white
Surface Treatment Glare treatment (3H) of the front Polarizer
RoHS Compliance Yes
BFR / PVC / As Free Yes for all
Ver. 1.0 Apr. 09. 2012 4/25
LP140WH7
2. Absolute Maximum Ratings

The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. ABSOLUTE MAXIMUM RATINGS
Values
Parameter Symbol Units Notes
Min Max
Power Input Voltage VCC -0.3 4.0 Vdc at 25 r 5qC
Operating Temperature TOP 0 50 qC 1
Storage Temperature HST -20 60 qC 1,2
Operating Ambient Humidity HOP 10 90 %RH 1
Storage Humidity HST 10 90 %RH 1,2
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39qC Max, and no condensation of water.
Note : 2. Storage Condition is guaranteed under packing condition.
90% 80%
60 60%
Wet Bulb 50
Humidity[(%)RH]
Temperature [୅] Storage
40 40%
30 Operation
20
20%
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [୅]
Ver. 1.0 Apr. 09. 2012 5/25
LP140WH7
3. Electrical Specifications
3-1. Electrical Characteristics
The LP140WH7 requires one power inputs. The first logic is employed to power the LCD electronics and to
drive the TFT array and liquid crystal.
Table 2. ELECTRICAL CHARACTERISTICS

Values
Parameter Symbol Unit Notes
Min Typ Max
LOGIC :
Power Supply Input Voltage VCC 3.0 3.3 3.6 V 1
Power Supply Input Current ICC - 226 260 mA

Mosaic 2
Power Consumption PCC - 0.75 0.85 W
Power Supply Inrush Current ICC_P - - 1500 mA 3

esp. Impedance ZeDP 90 100 110 ȳ 4
LED : W/O LED Driver
LED Output Voltage VOUT 32 34 V
LED Output Current IOUT 72 73.5 mA 1string 24mA
LED Power Consumption Full Duty POUT 2.35 2.5 W
Note)
1. The measuring position is the connector of Board Ass’y
and the test conditions are under 25୅, fv = 60Hz, Black pattern.
2. The specified Icc current and power consumption are under the
Vcc = 3.3V , 25୅, fv = 60Hz condition.
3. This Spec. is the max load condition for the cable impedance designing. Mosaic Pattern
4. This impedance value is needed for proper display and measured form esp. Tx to the mating connector.
** The below figures are the measuring Vcc condition and the Vcc control block LGD used.
The Vcc condition is same as the minimum of T1 at Power on sequence.
3.3V
Rising time
Vcc 90%
0V 10%
0.5ms
Ver. 1.0 Apr. 09. 2012 6/25
LP140WH7
3-2. Interface Connections

This LCD employs two interface connections, a 30 pin connector is used for the module electronics interface
and the other connector is used for the integral backlight system.
The electronics interface connector is a model CABLINE-VS RECE ASS’Y.
Table 3. MODULE CONNECTOR PIN CONFIGURATION (CN1)
Pin Symbol Description Notes

1 NC No Connection (Reserved) [Interface Chip]
1, Interface chips
2 H_GND High Speed (Main Link) Ground
1.1 LCD :SiW, SW0661 (LCD Controller)
3 NC No Connection (Reserved) including esp. Receiver
4 NC No Connection (Reserved) 1.2 System : GM60028 or ANX9804
or equivalent
* Pin to Pin compatible with esp.
6 ML0- Complement Signal-Lane 0
7 ML0+ True Signal-Main Lane 0 [Connector]
HD2S030HA1, JAE or I-PEX(CABLINE-VS)
9 AUX+ True Signal-Auxiliary Channel
10 AUX- Complement Signal-Auxiliary Channel
[Mating Connector]
CABLINE-VS PLUG CABLE ASS’Y
12 VCC LCD Logic and driver power (3.3V Typ.) or equivalent.
13 VCC LCD Logic and driver power (3.3V Typ.)
[LED Block]
14 BIST Built-In Self Test (active high)
LED block move to system set base
15 GND Ground
16 GND Ground [Connector pin arrangement]
Check LCM drawing (Page 18)
17 HPD HPD signal pin
18 GND Ground
19 GND Ground
20 NC No Connection (Reserved)
21 FB3 Regulated Current sink
24 NC No Connection (Reserved – Use P-vcom)
25 NC No Connection (Reserved – Use P-vcom)
26 VOUT Boost output voltage

Ver. 1.0 Apr. 09. 2012 7/25
LP140WH7
3-3. esp. Signal Timing Specifications
3-3-1. DC Specification
The VESA Display Port related AC specification is compliant with the VESA Display Port Standard.
Description Symbol Min Max Unit Notes

120 - For high bit rate
Differential peak-to-peak Input voltage VDIFF p-p mV
40 - For reduced bit rate
Rx DC common mode voltage VCM 0 2.0 V -
3-3-2. AC Specification
The VESA Display Port related AC specification is compliant with the VESA Display Port Standard.
Description Symbol Min Typ Max Unit Notes
Unit Interval for high bit rate

UI_High_Rate - 370 - ps Range is nominal ·350ppm.
(2.7Gbps/lane) DisplayPort Link Rx does not
require local crystal for link
Unit Interval for high bit rate clock generation
UI_Low_Rate - 617 - ps
(1.62Gbps/lane)
V Rx-SKEW-
Lane-to-Lane skew - - 5200 ps -
INTER_PAIR
V Rx-SKEW- - - 100 ps For high bit rate

Lane intra-pair skew
INTRA_PAIR - - 300 ps For reduced bit rate
Ver. 1.0 Apr. 09. 2012 8/25
LP140WH7
3-4. Signal Timing Specifications

This is the signal timing required at the input of the User connector. All of the interface signal timing should be
satisfied with the following specifications and specifications of esp. Tx/Rx for its proper operation.
Table 4. TIMING TABLE
ITEM Symbol Min Typ Max Unit Note
DCLK Frequency fCLK 68.1 70.0 73.0 MHz
Period tHP 1462 1492 1536
Hsync Width tWH 32 48 62 tCLK
Width-Active tWHA 1366 1366 1366
Period tVP 776 782 792

Vsync
Width tWV 2 5 8 tHP
Width-Active tWVA 768 768 768
Horizontal back porch tHBP 32 42 68

tCLK
Data Horizontal front porch tHFP 32 36 40
Enable Vertical back porch tVBP 4 6 12
tHP
Vertical front porch tVFP 2 3 4
3-5. Signal Timing Waveforms Condition : VCC =3.3V
High: 0.7VCC
Data Enable, Hsync, Vsync
Low: 0.3VCC
tCLK
DCLK 0.5 Vcc
tHP
Hsync t
WH
tHBP tWHA tHFP
Data Enable
tVP
tWV
Vsync tVFP
tVBP tWVA
Data Enable
Ver. 1.0 Apr. 09. 2012 9/25
LP140WH7
3-6. Color Input Data Reference

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the
color ; the higher the binary input, the brighter the color. The table below provides a reference for color
versus data input.
Table 5. COLOR DATA REFERENCE

Input Color Data
RED GREEN BLUE
Color
MSB LSB MSB LSB MSB LSB
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Color Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
RED (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
RED … … … …
RED (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
RED (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
GREEN (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
GREEN ... … … …
GREEN (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
GREEN (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
BLUE (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE … … … …
BLUE (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
BLUE (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Ver. 1.0 Apr. 09. 2012 10/25
LP140WH7
3-7. Power Sequence
Power Supply Input 90%

VCC 10%
esp. Display
HPD from Sink
Sink Aux CH
Source Main Link

Data
LED on/off
control Signal
LED_EN
Table 6-1. POWER SEQUENCE TABLE

Values
Parameter Units
Min Typ Max
T1 0.5 - 10 ms
T2 0 - 200 ms
T3 0 - 200 ms
T4 - - - ms
T5 - - - ms
T6 - - - ms
T7 0 - 50 ms
T8 200 - - ms
T9 200 - - ms
T10 0 - 500 ms
T11 3 - 10 ms
T12 500 - - ms
Note)
1. AUX Channel communication between source and sink must be operational after or upon HPD high.
2. Do not insert the mating cable when system turn on.
3. Valid Data have to meet “3-3. esp. Signal Timing Specifications”
Ver. 1.0 Apr. 09. 2012 11/25
LP140WH7
4. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 20 minutes in
a dark environment at 25qC. The values specified are at an approximate distance 50cm from the LCD surface
at a viewing angle of ) and 4 equal to 0q.
FIG. 1 presents additional information concerning the measurement equipment and method.
FIG. 1 Optical Characteristic Measurement Equipment and Method
LCD Module Equipment

Optical Stage(x,y)
500mm·50mm
Table 7. OPTICAL CHARACTERISTICS Ta=25qC, VCC=3.3V, fV=60Hz, fCLK= 70 MHz
Values
Parameter Symbol Units Notes
Min Typ Max
Contrast Ratio CR 400 500 - 1
Surface Luminance, white LWH 170 200 2
Luminance Variation(13points) G WHITE 1.4 1.6 3
Response Time TrR + TrD - 16 25 ms 4
Color Coordinates
RED RX 0.554 0.584 0.614
RY 0.319 0.349 0.379
GREEN GX 0.309 0.339 0.369
GY 0.532 0.562 0.592
BLUE BX 0.129 0.159 0.189
BY 0.084 0.114 0.144
WHITE WX 0.283 0.313 0.343
WY 0.299 0.329 0.359
Viewing Angle 5
x axis, right()=0q) 4r 40 45 - degree
x axis, left ()=180q) 4l 40 45 - degree
y axis, up ()=90q) 4u 10 15 - degree
y axis, down ()=270q) 4d 30 35 - degree
Gray Scale 6
Color Gamut C/G - 45 - %
Ver. 1.0 Apr. 09. 2012 12/25
LP140WH7
Notes)
1. Contrast Ratio(CR) is defined mathematically as
Surface Luminance with all white pixels
Contrast Ratio =
Surface Luminance with all black pixels
2. Surface luminance is the 5point (1~5)average across the LCD surface 50cm from the surface
with all pixels displaying white. For more information see FIG 2.
When ILED= TBD mA, LWH=200cd/m2(Typ.)
3. The variation in surface luminance , The panel total variation (G WHITE) is determined by measuring LN
at each test position 1 through 13 and then defined as followed numerical formula.
For more information see FIG 2.
Maximum(L1,L2, … L13)
G WHITE =
Minimum(L1,L2, … L13)
4. Response time is the time required for the display to transition from white to black (rise time, TrR) and
from black to white(Decay Time, TrD). For additional information see FIG 3.
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined
for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the
LCD surface. For more information see FIG 4.
6. Gray scale specification * fV=60Hz
Gray Level Luminance [%] (Typ)

L0 0.2
L7 1.2
L15 4.8
L23 10.9
L31 21.0
L39 34.8
L47 52.5
L55 74.2
L63 100
Ver. 1.0 Apr. 09. 2012 13/25
LP140WH7
FIG. 2 Luminance
<Measuring point for Average Luminance & measuring point for Luminance variation>
H
10mm A
6 7 8 10mm
2 3
B H,V : ACTIVE AREA
V A : H/4 mm
9 1 10
B : V/4 mm
POINTS: 13 POINTS
4 5 13
11 12
FIG. 3 Response Time Active Area

The response time is defined as the following figure and shall be measured by switching the input signal
for “black” and “white”.
TrR TrD
%
100
90
Optical
Response
10
0 white white
black
FIG. 4 Viewing angle Normal

Eye Y
<Dimension of viewing angle range> I = 90 q , Up
I = 180 q ,
Left T
I = 0q ,
Right
I = 270 q ,
Down
Ver. 1.0 Apr. 09. 2012 14/25
LP140WH7
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model LP140WH7. In addition the figures
in the next page are detailed mechanical drawing of the LCD Module.
Horizontal (A) 324 r 0.3mm

Outline Dimension
Vertical (B) 200.2r 0.3mm
(Without PCB)
Thickness 3.8mm (Typ.) 4.1mm (Max.)
Horizontal 309.40 mm
Active Display Area
Vertical 173.95 mm
Weight 320 g (Max.)
Surface Treatment Hard Coating(3H), Glare treatment of the front polarizer
Ver. 1.0 Apr. 09. 2012 15/25
LP140WH7
<FRONT VIEW> Note) Unit:[mm], General tolerance: r 0.3mm
Ver. 1.0 Apr. 09. 2012 16/25
LP140WH7
<SECTION VIEW> Note) Unit:[mm], General tolerance: r 0.3mm
Ver. 1.0 Apr. 09. 2012 17/25
LP140WH7
6. Reliability
Environment test condition
No Test Item Conditions
1 High temperature storage test Ta= 60qC, 240h
2 Low temperature storage test Ta= -20qC, 240h
3 High temperature operation test Ta= 50qC, 50%RH, 240h
4 Low temperature operation test Ta= 0qC, 240h
5 Vibration test (non-operating) Sine wave, 5 ~ 150Hz, 1.5G, 0.37oct/min,3 axis, 30min/axis
6 Shock test (non-operating) - No functional or cosmetic defects following a shock to all 6
sides delivering at least 180 G in a half sine pulse no longer
than 2 ms to the display module
- No functional defects following a shock delivering at least
200 g in a half sine pulse no longer than 2 ms to each of 6
sides. Each of the 6 sides will be shock tested with one each
display, for a total of 6 displays
7 Altitude operating 0 ~ 10,000 feet (3,048m) 24Hr
storage / shipment 0 ~ 40,000 feet (12,192m) 24Hr
{ Result Evaluation Criteria }

There should be no change which might affect the practical display function when the display quality
test is conducted under normal operating condition.
7. International Standards
7-1. Safety
a) UL 60950-1, Underwriters Laboratories Inc.
Information Technology Equipment - Safety - Part 1 : General Requirements.
b) CAN/CSA C22.2 No.60950-1-07, Canadian Standards Association.
c) EN 60950-1, European Committee for Electrotechnical Standardization (CENELEC).

d) IEC 60950-1, The International Electrotechnical Commission (IEC).
7-2. EMC
a) ANSI C63.4 “American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.”
American National Standards Institute (ANSI), 2003.
b) CISPR 22 “Information technology equipment – Radio disturbance characteristics – Limit and
methods of measurement." International Special Committee on Radio Interference
(CISPR), 2005.
c) CISPR 13 “Sound and television broadcast receivers and associated equipment – Radio disturbance
characteristics – Limits and method of measurement." International Special Committee on Radio
Interference (CISPR), 2006.
7-3. Environment
a) RoHS, Directive 2002/95/EC of the European Parliament and of the council of 27 January 2003
Ver. 1.0 Apr. 09. 2012 18/25
LP140WH7
8. Packing
8-1. Designation of Lot Mark

a) Lot Mark
A B C D E F G H I J K L M
A,B,C : SIZE(INCH) D : YEAR

E : MONTH F ~ M : SERIAL NO.
Note
1. YEAR
Year 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
Mark A B C D E F G H J K
2. MONTH
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Mark 1 2 3 4 5 6 7 8 9 A B C
b) Location of Lot Mark

Serial No. is printed on the label. The label is attached to the backside of the LCD module.
This is subject to change without prior notice.
8-2. Packing Form

a) Package quantity in one box : 30 pcs
b) Box Size : 478 mm X 365 mm X 288 mm
Ver. 1.0 Apr. 09. 2012 19/25
LP140WH7
8-3. Label Description
Model Name
LGD CODE
Lot Mark
LGD Code
(1) Model Name : L P 1 4 0 W H 7 - T S A 1
Revision Code
Product Type
Display Mode
Basic Model Serial No.
Resolution : HD
Size (inch) : 14.0”
Application : NBPC
LGD Brand Initial: L
(2) Lot Mark : 1 4 0 A B C 0 0 0 0 0 0 1
SERIAL NO.
MONTH
YEAR
SIZE
Ver. 1.0 Apr. 09. 2012 20/25
LP140WH7
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
9-1. MOUNTING PRECAUTIONS

(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to the
module. And the case on which a module is mounted should have sufficient strength so that external
force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break
by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental
to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives
used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause
chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
(10) When handling the LCD module, it needs to handle with care not to give mechanical stress to the PCB
and Mounting Hole area.”
9-2. OPERATING PRECAUTIONS

(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage :
V=· 200mV(Over and under shoot voltage)
(2) Response time depends on the temperature. (In lower temperature, it becomes longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)
And in lower temperature, response time(required time that brightness is stable after turned on) becomes
longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or
electrical contacted parts. And after fading condensation, smear or spot will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be
done by system manufacturers. Grounding and shielding methods may be important to minimized the
interference.
Ver. 1.0 Apr. 09. 2012 21/25
LP140WH7
9-3. ELECTROSTATIC DISCHARGE CONTROL

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
9-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.
9-5. STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
temperature between 5qC and 35qC at normal humidity.
(2) The polarizer surface should not come in contact with any other object.
It is recommended that they be stored in the container in which they were shipped.
9-6. HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) When the protection film is peeled off, static electricity is generated between the film and polarizer.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
(2) The protection film is attached to the polarizer with a small amount of glue. If some stress is applied
to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to
remain on the polarizer.
Please carefully peel off the protection film without rubbing it against the polarizer.
(3) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of glue still on the polarizer after the protection film is peeled off.
(4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige is
recognized, please wipe them off with absorbent cotton waste or other soft material like chamois
soaked with normal-hexane.
Ver. 1.0 Apr. 09. 2012 22/25
LP140WH7
APPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 1/3

Byte Byte Value Value
(Dec) (Hex) Field Name and Comments (Hex) (Bin)
0 00 Header 00 00000000
1 01 Header FF 11111111
2 02 Header FF 11111111
Header
3 03 Header FF 11111111
4 04 Header FF 11111111
5 05 Header FF 11111111
6 06 Header FF 11111111
7 07 Header 00 00000000
8 08 ID Manufacture Name LGD 30 00110000
9 09 ID Manufacture Name E4 11100100
10 0A ID Product Code 0375h 75 01110101
Vendor / Product
11 0B ( Hex. LSB first ) 03 00000011

EDID Version
12 0C ID Serial No. - Optional ("00h" If not used, Number Only and LSB First) 00 00000000
13 0D ID Serial No. - Optional ("00h" If not used, Number Only and LSB First) 00 00000000
14 0E ID Serial No. - Optional ("00h" If not used, Number Only and LSB First) 00 00000000
15 0F ID Serial No. - Optional ("00h" If not used, Number Only and LSB First) 00 00000000
16 10 Week of Manufacture - Optinal 00 weeks 00 00000000
17 11 Year of Manufacture 2012 years 16 00010110
18 12 EDID structure version # = 1 01 00000001
19 13 EDID revision # = 4 04 00000100
Video input Definition = Input is a Digital Video signal Interface , Colo Bit Depth : 6 Bits per Primary Color , Digital
20 14
Video Interface Standard Supported: DisplayPort is supported
95 10010101
21 Horizontal Screen Size (Rounded cm) = 31 cm 1F 00011111

Parameters
15
Display
22 16 Vertical Screen Size (Rounded cm) = 17 cm 11 00010001

23 17 Display Transfer Characteristic (Gamma) = (gamma*100)-100 = Example:(2.2*100)-100=120 78 01111000
Feature Support [ Display Power Management(DPM) : Standby Mode is not supported, Suspend Mode is not supported,
Active Off = Very Low Power is not supported ,Supportted Color Encoding Formats : RGB 4:4:4 & YCrCb 4:4:4 ,Other
24 18
Feature Support Flags : No_sRGB, Preferred Timing Mode, No_Display is continuous frequency (Multi-mode_Base
0A 00001010
EDID and Extension Block).]

25 19 Red/Green Low Bits (RxRy/GxGy) 9F 10011111
26 1A Blue/White Low Bits (BxBy/WxWy) D5 11010101
27 1B Red X Rx = 0.584 95 10010101
Coordinates
Panel Color
28 1C Red Y Ry = 0.349 59 01011001

29 1D Green X Gx = 0.339 56 01010110
30 1E Green Y Gy = 0.562 8F 10001111
31 1F Blue X Bx = 0.159 28 00101000
32 20 Blue Y By = 0.114 1D 00011101
33 21 White X Wx = 0.313 50 01010000
34 22 White Y Wy = 0.329 54 01010100
Timing
35 Established timing 1 ( Optional_00h if not used) 00 00000000

Establi
23
shed
36 24 Established timing 2 ( Optional_00h if not used) 00 00000000

37 25 Manufacturer's timings ( Optional_00h if not used) 00 00000000
38 26 Standard timing ID1 ( Optional_01h if not used) 01 00000001
42 2A Standard timing ID3 ( Optional_01h if not used) 01 00000001
Standard Timing ID
43 2B Standard timing ID3 ( Optional_01h if not used) 01 00000001

44 2C Standard timing ID4 ( Optional_01h if not used) 01 00000001
45 2D Standard timing ID4 ( Optional_01h if not used) 01 00000001
46 2E Standard timing ID5 ( Optional_01h if not used) 01 00000001
47 2F Standard timing ID5 ( Optional_01h if not used) 01 00000001
Ver. 1.0 Apr. 09. 2012 23/25
LP140WH7

54 36 Pixel Clock/10,000 (LSB) 70 MHz @ 60 Hz 58 01011000
55 37 Pixel Clock/10,000 (MSB) 1B 00011011
56 38 Horizontal Active (HA) (lower 8 bits) 1366 pixels 56 01010110
57 39 Horizontal Blanking (HB) (lower 8 bits) 126 pixels 7E 01111110
58 3A Horizontal Active (HA) / Horizontal Blanking (HB) (upper 4:4bits) 50 01010000
59 Vertical Avtive (VA) 768 lines 00 00000000
Timing Descriptor #1
3B
60 3C Vertical Blanking (VB) (DE Blanking typ.for DE only panels) 14 lines 0E 00001110
61 3D Vertical Active (VA) / Vertical Blanking (VB) (upper 4:4bits) 30 00110000
62 3E Horizontal Front Porch in pixels (HF) (lower 8 bits) 36 pixels 24 00100100
63 3F Horizontal Sync Pulse Width in pixels (HS) (lower 8 bits) 48 pixels 30 00110000
64 40 Vertical Front Porch in lines (VF) : Vertical Sync Pluse Width in lines (VS) (lower 4 bits) 3 lines : 5 lines 35 00110101
65 41 Horizontal Front Porch/ Sync Pulse Width/ Vertical Front Porch/ Sync Pulse Width (upper 2bits) 00 00000000
66 42 Horizontal Vedio Image Size (mm) (lower 8 bits) 309 mm 35 00110101
67 43 Vertical Vedio Image Size (mm) (lower 8 bits) 174 mm AE 10101110
68 44 Horizontal Image Size / Vertical Image Size (upper 4 bits) 10 00010000
69 45 Horizontal Border = 0 (Zero for Notebook LCD) 00 00000000
70 46 Vertical Border = 0 (Zero for Notebook LCD) 00 00000000
71 47 Non-Interlace, Normal display, no stereo, Digital Separate [ Vsync_NEG, Hsync_NEG (outside of V-sync) ] 19 00011001
72 48 Flag 00 00000000
73 49 Flag 00 00000000
74 4A Flag 00 00000000
75 4B Data Type Tag (Descriptor Defined by manufacturer ) 00 00000000
76 4C Flag 00 00000000
77 4D Descriptor Defined by manufacturer 00 00000000
78 4E Descriptor Defined by manufacturer 00 00000000

79 4F Descriptor Defined by manufacturer 00 00000000
80 50 Descriptor Defined by manufacturer 00 00000000
90 5A Flag 00 00000000
91 5B Flag 00 00000000
92 5C Flag 00 00000000
93 5D Data Type Tag ( Alphanumeric Data String (ASCII String) ) FE 11111110
94 5E Flag 00 00000000
95 Alphanumeric Data String (ASCII String) L 4C 01001100
5F
96 60 Alphanumeric Data String (ASCII String) G 47 01000111
97 61 Alphanumeric Data String (ASCII String) 20 00100000
98 62 Alphanumeric Data String (ASCII String) D 44 01000100
99 63 Alphanumeric Data String (ASCII String) i 69 01101001
100 64 Alphanumeric Data String (ASCII String) s 73 01110011
101 65 Alphanumeric Data String (ASCII String) p 70 01110000
102 66 Alphanumeric Data String (ASCII String) l 6C 01101100
103 67 Alphanumeric Data String (ASCII String) a 61 01100001
104 68 Alphanumeric Data String (ASCII String) y 79 01111001
105 69 Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASCⅡ 0A char 00001010
code 0Ah,set remaining = 20h)
106 6A Manufacturer P/N(If<13 char--> 0Ah, then terminate with ASCⅡ 20 char00100000
code 0Ah,set remaining = 20h)
Ver. 1.0 Apr. 09. 2012 24/25
LP140WH7

108 6C Flag 00 00000000
109 6D Flag 00 00000000
110 6E Flag 00 00000000
111 6F Data Type Tag ( Alphanumeric Data String (ASCII String) ) FE 11111110
112 70 Flag 00 00000000
113 Alphanumeric Data String (ASCII String) L 4C 01001100
71
114 72 Alphanumeric Data String (ASCII String) P 50 01010000
115 73 Alphanumeric Data String (ASCII String) 1 31 00110001
118 76 Alphanumeric Data String (ASCII String) W 57 01010111
119 77 Alphanumeric Data String (ASCII String) H 48 01001000
121 79 Alphanumeric Data String (ASCII String) - 2D 00101101
122 7A Alphanumeric Data String (ASCII String) T 54 01010100
123 7B Alphanumeric Data String (ASCII String) S 53 01010011
124 7C Alphanumeric Data String (ASCII String) A 41 01000001
125 7D Alphanumeric Data String (ASCII String) 1 31 00110001
Check
126 7E Extension flag (# of optional 128 panel ID extension block to follow, Typ = 0) 00 00000000
127 7F Check Sum (The 1-byte sum of all 128 bytes in this panel ID block shall = 0) 52 01010010
Ver. 1.0 Apr. 09. 2012 25/25

Specification FOR Approval: Title 14.0" HD TFT LCD

Uploaded by

Copyright:

Available Formats

Specification FOR Approval: Title 14.0" HD TFT LCD

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Specification FOR Approval: Title 14.0" HD TFT LCD

Uploaded by

Copyright:

Available Formats

Global LCD Panel Exchange Center www.panelook.

Title 14.0” HD TFT LCD

Customer Acer SUPPLIER LG Display Co., Ltd.

MODEL *MODEL LP140WH7

APPROVED BY SIGNATURE APPROVED BY SIGNATURE

Do Young Kim / Manager

Ver. 1.0 Apr. 09. 2012 1/25

2 ABSOLUTE MAXIMUM RATINGS 5

3-1 ELECTRICAL CHARACTREISTICS 6

3-2 INTERFACE CONNECTIONS 7

3-3 esp. SIGNAL TIMING SPECIFICATION 8

3-4 SIGNAL TIMING SPECIFICATIONS 9

3-5 SIGNAL TIMING WAVEFORMS 9

3-6 COLOR INPUT DATA REFERNECE 10

3-7 POWER SEQUENCE 11

4 OPTICAL SFECIFICATIONS 12-14

5 MECHANICAL CHARACTERISTICS 15-17

8-1 PACKING FORM 19-20

A APPENDIX. Enhanced Extended Display Identification Data 23-25

Ver. 1.0 Apr. 09. 2012 2/25

Ver. 1.0 Apr. 09. 2012 3/25

Control & Data Power EDID signal & Power

Ver. 1.0 Apr. 09. 2012 4/25

2. Absolute Maximum Ratings

Table 1. ABSOLUTE MAXIMUM RATINGS

Operating Temperature TOP 0 50 qC 1

Storage Temperature HST -20 60 qC 1,2

Operating Ambient Humidity HOP 10 90 %RH 1

Storage Humidity HST 10 90 %RH 1,2

Temperature [୅] Storage

Dry Bulb Temperature [୅]

Ver. 1.0 Apr. 09. 2012 5/25

Table 2. ELECTRICAL CHARACTERISTICS

Power Supply Input Current ICC - 226 260 mA

Power Supply Inrush Current ICC_P - - 1500 mA 3

Ver. 1.0 Apr. 09. 2012 6/25

3-2. Interface Connections

Table 3. MODULE CONNECTOR PIN CONFIGURATION (CN1)

Pin Symbol Description Notes

27 VOUT Boost output voltage

28 VOUT Boost output voltage

Ver. 1.0 Apr. 09. 2012 7/25

3-3. esp. Signal Timing Specifications

Description Symbol Min Max Unit Notes

Description Symbol Min Typ Max Unit Notes

Unit Interval for high bit rate

V Rx-SKEW- - - 100 ps For high bit rate

Ver. 1.0 Apr. 09. 2012 8/25

3-4. Signal Timing Specifications

ITEM Symbol Min Typ Max Unit Note

DCLK Frequency fCLK 68.1 70.0 73.0 MHz

Period tHP 1462 1492 1536

Hsync Width tWH 32 48 62 tCLK

Width-Active tWHA 1366 1366 1366

Period tVP 776 782 792

Width-Active tWVA 768 768 768

Horizontal back porch tHBP 32 42 68

3-5. Signal Timing Waveforms Condition : VCC =3.3V

tHBP tWHA tHFP