Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 216 views

    Product Certification Report: Sieve Analysis Hardness

    Uploaded by

    Freddy Taipe Cru
    1. This report certifies that a shipment of 26,000 tons of HG-50 ST AMASTEEL GRIT met specifications for chemical composition, hardness, sieve analysis, and other tests. 2. Testing showed the product met specifications for carbon, manganese, silicon, sulfur, phosphorus, hardness, sieve analysis results, and other mechanical and miscellaneous tests. 3. The certification report details test procedures used to ensure the product complied with specifications from standards organizations like SAE International and ASTM.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Product Certification Report: Sieve Analysis Hardness

    Uploaded by

    Freddy Taipe Cru
    216 views2 pages
    1. This report certifies that a shipment of 26,000 tons of HG-50 ST AMASTEEL GRIT met specifications for chemical composition, hardness, sieve analysis, and other tests. 2. Testing showed the product met specifications for carbon, manganese, silicon, sulfur, phosphorus, hardness, sieve analysis results, and other mechanical and miscellaneous tests. 3. The certification report details test procedures used to ensure the product complied with specifications from standards organizations like SAE International and ASTM.

    Original Title

    HG-50

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This report certifies that a shipment of 26,000 tons of HG-50 ST AMASTEEL GRIT met specifications for chemical composition, hardness, sieve analysis, and other tests. 2. Testing showed the product met specifications for carbon, manganese, silicon, sulfur, phosphorus, hardness, sieve analysis results, and other mechanical and miscellaneous tests. 3. The certification report details test procedures used to ensure the product complied with specifications from standards organizations like SAE International and ASTM.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    216 views2 pages

    Product Certification Report: Sieve Analysis Hardness

    Uploaded by

    Freddy Taipe Cru
    1. This report certifies that a shipment of 26,000 tons of HG-50 ST AMASTEEL GRIT met specifications for chemical composition, hardness, sieve analysis, and other tests. 2. Testing showed the product met specifications for carbon, manganese, silicon, sulfur, phosphorus, hardness, sieve analysis results, and other mechanical and miscellaneous tests. 3. The certification report details test procedures used to ensure the product complied with specifications from standards organizations like SAE International and ASTM.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    PRODUCT CERTIFICATION REPORT

    08.06.2021 G21-464 SO80121003787


    Date Certification No. Ervin Order No.

    TM Metalcorp Eirl TMM-21-239 07.06.2021


    Customer P.O. No. Shipping Date

    SH80121004546
    Attention Release No. Customer No.

    Av. Proceres MZ B4 Lt 21 Urb. Puerta De Pro HG-50 ST AMASTEEL GRIT


    Address Product shipped

    Los Olivos Lima-Peru Peru


    City State Postal code Country

    G0050-H-YB-0001 26,000t GC210420, GB210528,GC210601


    Product Code Quantity Shipped *Manufacturing Date (lot#)

    Specification(s) Certified to (including revision Date or Code): SAE J1993, SAE J444

    CERTIFICATION TEST RESULTS:

    SIEVE ANALYSIS HARDNESS


    MM Inches Specification Cumulative % Retained RC - Converted from Vickers 500 Grams
    0,710 .0278 0% max. 0% Hardness Number
    0,300 .0117 65% min. 98% Specification min. 60 HRC - 90% min
    0,180 .0070 75% min. 100% # of readings 10

    Average 64,7 HRC


    Range 6,5 HRC

    CHEMICAL ANALYSIS MISCELLANEOUS TESTS


    Element Specification Percent * Characteristic Specification Results
    Carbon 0.80-1.20 0,87 Internal Defects 40% Max Less Than 40%
    Manganese
    S230 and up, 0.60-1.20 0,97 Cracks 40% Max Less Than 40%
    and all Grit Shrinkage 10% Max Less Than 10%
    S170 0.50-1.20 Density 7.3 gr/ml Greater Than 7.3 gr/ml
    S70-S110 0.35-1.20 Particle Shape (Round/Half Round Particles)
    Silicon 0.40 Min. 0,97 S/M Hardness 10% Max Less Than 10%
    Sulphur 0.05 Max. 0,020 L/H Hardness 5% Max Less Than 5%
    Phosphorous 0.05 Max. 0,021 Moisture 0.2% Max Less Than 0,2%
    Microstructure: Uniform tempered martensite with fine, well-distributed carbides.

    COMMENTS: Product certification report is according DIN EN 10204 - 2.2

    Signature: Title: Quality Assurance

    Revised 15/05/20 ERVIN Germany GmbH - Rudower Chaussee 48 - 12489 Berlin - Germany C43-4

    Page 1 of 2
    1. This report is confidential and proprietary information for the customer requiring this report.

    2. This report will not be copied and/or distributed outside of Ervin without written consent of the customer.

    3. The following applicable test procedures we used to generate the data included in this report.

    4. Ervin Amasteel complies to all the latest revisions for the specifications listed below.

    SAE International:
    SAE J442 Test Strip Holder and Gauge for Shot Peening
    SAE J443 Procedures for Using Standard Shot Peening Test Strip
    SAE J444 Cast Shot and Grit Size Specifications for Peening and Cleaning
    SAE J445 Metallic Shot and Grit Mechanical Testing
    SAE J827 Cast Steel Shot
    SAE J1993 Cast Steel Grit
    SAE AMS2431 Peening Media General Requirements
    SAE AMS2431/1 Cast Steel Shot, Regular Hardness (45 - 52 HRC)
    SAE AMS2431/2 Cast Steel Shot, High Hardness (55 - 62 HRC)

    * ISO (International Organisation for Standardisation):


    ISO 11125 Preparation of Steel Substrates Before Application of Paints and Related Products -
    Test Methods for Blast Cleaning Abrasive.
    Part 1: Sampling
    Part 2: Determination of Particle Size Distribution
    Part 3: Determination of Hardness
    Part 4: Determination of apparent density
    Part 5: Determination of percentage defective particles and of microstructure
    Part 6: Determination of foreign matter
    Part 7: Determination of moisture

    ASTM:
    B 215 Standard Practices for Sampling Finished lots of Metal Powders
    D 512 Standard Test Method for Chloride Ion in Water
    D 4940 Standard Test Method for Conductimetric Ionic Contamination of Blasting Abrasive
    E 11 Specification for Wire Cloth Sieves for Test Purposes
    E 140 Hardness Conversion Tables for Metals (Relationship between Brinell Hardness, Vickers
    Hardness, Rockwell Hardness, Rockwell Superficial Hardness and Knoop Hardness
    E 305 Standard Practice for Establishing and Controlling Spectrochemical Analytical Curves
    E 384 Test Methods for Microhardness of Materials
    E 406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
    E 415 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon
    and Low Alloy Steel
    E 1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for
    Spectrochemical Analysis by Remelting
    E 1257 Standard Guide for Evaluating Materials Used for Surface Preparation in
    Spectrochemical Analysis

    Ervin Amasteel Quality Instructions:


    Q.I. No. - TL-5/GL-5 Durability Test
    Q.I. No. - TL-43/GL-43 Transmitted Energy Test

    Revised 06.05.2020 ERVIN Germany GmbH - Rudower Chaussee 48 - 12489 Berlin - Germany C43-9
    Page 2 of 2

    You might also like