Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Sprinter

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4
At a glance
Powered by AI
The document provides information about various components and sensors of a Mercedes Sprinter vehicle, including abbreviations and functions.

The vehicle is a 1999-2006 Mercedes Sprinter 901/2/3/4/5 series with a 2.2L diesel engine producing 95 kW at 3800 rpm.

The document provides color codes and abbreviations for different wire colors and also notes that some manufacturers use numbers instead of colors to identify wires.

 

Telephone:
Fax:
VAT Registration No.:

A63 AC control module


B138 Accelerator pedal position (APP) sensor
31 Battery -
30 Battery +
S23 Bonnet switch
B132 Camshaft position (CMP) sensor
S258 Clutch pedal position (CPP) switch
A94 Combination control module/relay
CAN-H Controller area network (data bus) high
CAN-L Controller area network (data bus) low
R57 Crankcase breather heater
B54 Crankshaft position (CKP) sensor
S162 Cruise control actuator switch
S79 Cruise control master switch
X1 Data link connector (DLC)
A35 Engine control module (ECM)
K46 Engine control relay
B24 Engine coolant temperature (ECT) sensor
A224 Engine oil sensor module
Y28 Exhaust gas recirculation (EGR) solenoid
M12 Fuel pump (FP)
K20 Fuel pump (FP) relay
Y170 Fuel rail pressure (FRP) control valve
B186 Fuel rail pressure (FRP) sensor
Y12 Fuel shut-off solenoid
B26 Fuel system pressure sensor
B31 Fuel temperature sensor
F Fuse
X28-I Fuse box/relay plate, steering column 1
R5 Glow plug
A104 Glow plug control module
H25 Glow plug warning lamp
15 Ignition switch - ignition ON
50 Ignition switch - start signal
Y3 Injector
A5 Instrument panel
A75 Instrumentation control module
Y102 Intake manifold air control solenoid
B30 Mass air flow (MAF) sensor
S259 Neutral position (NP) switch
Y160 Piston cut-off solenoid
S28 Reverse gear position switch

Manufacturer: Mercedes-Benz Model: Sprinter (901/2/3/4/5) 2,2D 213 CDI (c) Autodata Limited 2013
Engine code: 611.981 Output: 95 (129) 3800 . 9/12/2020
Tuned for: Year: 1999-06 V9.200-
K4 Starter motor relay
S194 Stop-start system master switch
A198 Supplementary restraint system (SRS) control module
B193 Turbocharger (TC) boost air temperature sensor
B105 Turbocharger (TC) boost pressure sensor
Y68 Turbocharger (TC) wastegate regulating valve

bl = blue br = brown el = cream ge = yellow


gn = green gr = grey nf = neutral og = orange
rs = pink rt = red sw = black vi = violet
ws = white hbl = light blue hgn = light green rbr = maroon
x = braided cable y = high tension z = non-cable connection

NOTE: In certain diagrams (Citroen, Peugeot & Renault), colour codes are replaced by numbers which are used to
identify a particular cable and not the colour. In this instance, the cables will be numbered at each end close to the
harness connector.

Manufacturer: Mercedes-Benz Model: Sprinter (901/2/3/4/5) 2,2D 213 CDI (c) Autodata Limited 2013
Engine code: 611.981 Output: 95 (129) 3800 . 9/12/2020
Tuned for: Year: 1999-06 V9.200-
Manufacturer: Mercedes-Benz Model: Sprinter (901/2/3/4/5) 2,2D 213 CDI (c) Autodata Limited 2013
Engine code: 611.981 Output: 95 (129) 3800 . 9/12/2020
Tuned for: Year: 1999-06 V9.200-
Manufacturer: Mercedes-Benz Model: Sprinter (901/2/3/4/5) 2,2D 213 CDI (c) Autodata Limited 2013
Engine code: 611.981 Output: 95 (129) 3800 . 9/12/2020
Tuned for: Year: 1999-06 V9.200-

You might also like