TRONIC-CY (LiY-CY) / TRONIC-DY (LiY-DY)

colour code DIN 47100, without colour repetition, EMC-preferred type

• x = without protective conductor

TECHNICAL DATA • Cores stranded in layers with optimal lay lengths
• Foil wrapping
PVC data cable in alignment with DIN VDE 0812
• Drain wire, tinned copper
Temperature range flexible -5°C to +80°C • Screen:
fixed -40°C to +80°C 1 core(s): helically wound tinned copper wires, approx. coverage
Peak operating voltage 0.14 mm²: 350 V 85 %
0.25 - 1.5 mm²: 500 V 2 - 61 core(s): braided screen of tinned copper wires, approx. co-
(not for high power current verage 85 %
installation purposes) • Outer sheath: PVC acc. to DIN VDE 0207-363-4-1 /
Test voltage core/core 1200 V DIN EN 50363-4-1 (compound type TM2)
• Sheath colour: grey (RAL 7001)
Test voltage core/screen 800 V
• Length marking: in metres
Breakdown voltage 2400 V
Mutual capacitance core/core at 800 Hz
0.14 - 0.25 mm²: approx. 100 PROPERTIES
n
pF/m • largely resistant to: oil,
0.34 - 1.5 mm²: approx. 150 for details, see "Technical Information"
pF/m • the materials used during manufacturing are cadmium-free, con-
Mutual capacitance core/screen tain no silicone and are free from substances harmful to the wetting
at 800 Hz properties of lacquers
0.14 - 0.25 mm²: approx. 200
pF/m
0.34 - 1.5 mm²: approx. 270 TESTS
n
pF/m • flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-
Characteristic impedance 78 Ohm 1-2 / IEC 60332-1-2
(approx. value)
Inductance approx. 0.65 mH/km
Coupling resistance at 30 MHz, approx. 250 Ohm/ APPLICATION
n
13.01.2021 / We reserve the right to make technical changes; the imprint in the image is purely exemplary

km Suitable for flexible applications with free movement, without tensile

Minimum bending radius flexible 10x Outer-Ø stress and without forced motion control in dry, damp and wet
fixed 5x Outer-Ø rooms, however, not suitable for outdoor use. Used as control and
signal cables in the milliampere range for computer systems, control
CABLE STRUCTURE
n devices, scales etc. Due to its extremely small outer-Ø, it is especially
• Copper wire bare, 0.5 - 1.5 mm²: finely stranded acc. to suitable for subminiature plugs, electronic devices etc. These cables
DIN VDE 0295 Class 5 / IEC 60228 Class 5 with copper screening are ideally suited for interefence-free data and
• Wire structure: signal transmission for measurement and control technology. EMC=
0.14 mm²: approx. 18 x 0.10 mm Electromagnetic Compatibility; in order to optimise EMC properties,
0.25 mm²: approx. 14 x 0.15 mm we recommend a double-sided and all-round large contact area of
0.34 mm²: 7 x 0.25 mm the copper braiding.
• Core insulation: PVC acc. to DIN VDE 0207-363-3 /
DIN EN 50363-3 (compound type TI2)
• Core identification in alignment with DIN 47100, colour coded,
NOTES
n
without colour repetition from the 45th core • the conductor is metrically (mm²) constructed, AWG numbers are
approximated, and are for reference only

TRONIC-DY (LiY-DY), helically wound tinned copper wires

Part no. No. cores x AWG, Outer Cu-weight Weight Part no. No. cores x AWG, Outer Cu-weight Weight
cross-sec. approx. Ø mm, kg/km kg/km, cross-sec. approx. Ø mm, kg/km kg/km,
mm² approx. approx. mm² approx. approx.
20139 1 x 0.14 26 2.6 6.1 16.0 16001 1 x 0.5 20 3.5 15.0 40.0
20084 1 x 0.25 24 3.0 7.2 27.0 16025 1 x 0.75 19 4.0 19.0 41.0
20088 1 x 0.34 22 3.2 13.5 24.0

TRONIC-CY (LiY-CY), braided screen of tinned copper wires

Part no. No. cores x AWG, Outer Cu-weight Weight Part no. No. cores x AWG, Outer Cu-weight Weight
cross-sec. approx. Ø mm, kg/km kg/km, cross-sec. approx. Ø mm, kg/km kg/km,
mm² approx. approx. mm² approx. approx.
20001 2 x 0.14 26 3.9 12.0 20.0 20003 4 x 0.14 26 4.3 14.5 32.0
20002 3 x 0.14 26 4.0 13.0 27.0 20004 5 x 0.14 26 4.7 15.5 37.0

Continued on next page

 TRONIC-CY (LiY-CY) / TRONIC-DY (LiY-DY)
colour code DIN 47100, without colour repetition, EMC-preferred type

TRONIC-CY (LiY-CY), braided screen of tinned copper wires

Part no. No. cores x AWG, Outer Cu-weight Weight Part no. No. cores x AWG, Outer Cu-weight Weight
cross-sec. approx. Ø mm, kg/km kg/km, cross-sec. approx. Ø mm, kg/km kg/km,
mm² approx. approx. mm² approx. approx.
20005 6 x 0.14 26 5.2 18.2 42.0 20068 21 x 0.34 22 10.9 116.0 199.0
20006 7 x 0.14 26 5.2 19.0 48.0 20069 24 x 0.34 22 11.7 129.0 229.0
20007 8 x 0.14 26 5.9 21.3 55.0 20093 25 x 0.34 22 12.0 120.0 241.0
20008 10 x 0.14 26 6.5 28.7 65.0 20070 27 x 0.34 22 12.1 138.0 258.0
20009 12 x 0.14 26 6.7 30.5 77.0 20071 30 x 0.34 22 12.6 158.0 290.0
20010 14 x 0.14 26 6.9 32.0 79.0 20072 32 x 0.34 22 13.0 163.0 305.0
20011 16 x 0.14 26 7.3 43.2 89.0 20073 36 x 0.34 22 13.8 178.0 330.0
20012 18 x 0.14 26 7.6 51.0 103.0 20090 37 x 0.34 22 13.8 192.0 348.0
20013 20 x 0.14 26 8.3 55.0 116.0 20074 40 x 0.34 22 14.8 198.0 364.0
20014 21 x 0.14 26 8.4 56.0 120.0 20075 42 x 0.34 22 14.9 203.0 389.0
20015 24 x 0.14 26 8.9 62.0 131.0 20076 44 x 0.34 22 15.6 214.0 414.0
20091 25 x 0.14 26 9.1 61.0 136.0 20077 48 x 0.34 22 15.8 227.0 420.0
20016 27 x 0.14 26 9.2 65.0 142.0 20078 52 x 0.34 22 16.3 242.0 450.0
20017 30 x 0.14 26 9.5 69.0 157.0 20079 56 x 0.34 22 16.8 267.0 480.0
20018 32 x 0.14 26 9.9 76.0 163.0 20080 61 x 0.34 22 17.2 295.0 520.0
20019 36 x 0.14 26 10.2 83.0 182.0 16002 2 x 0.5 20 5.3 29.0 45.0
20020 40 x 0.14 26 11.1 88.0 209.0 16003 3 x 0.5 20 5.6 39.0 55.0
20021 42 x 0.14 26 11.2 94.0 217.0 16004 4 x 0.5 20 6.3 46.0 61.0
20022 44 x 0.14 26 11.5 110.0 226.0 16005 5 x 0.5 20 6.8 52.0 76.0
20023 48 x 0.14 26 11.7 115.0 240.0 16006 6 x 0.5 20 7.3 66.0 89.0
20024 52 x 0.14 26 12.3 124.0 270.0 16007 7 x 0.5 20 7.3 68.0 98.0
20025 56 x 0.14 26 12.5 132.0 320.0 16008 8 x 0.5 20 8.6 80.0 117.0
20026 61 x 0.14 26 12.8 146.0 370.0 16009 10 x 0.5 20 9.4 93.0 135.0
20029 2 x 0.25 24 4.3 15.8 31.0 16010 12 x 0.5 20 9.6 117.0 157.0
20030 3 x 0.25 24 4.5 18.6 36.0 16011 14 x 0.5 20 10.1 122.0 190.0
20031 4 x 0.25 24 4.8 22.0 40.0 16012 16 x 0.5 20 10.6 129.0 210.0
20032 5 x 0.25 24 5.4 26.5 51.0 16013 18 x 0.5 20 11.3 152.0 217.0
20083 6 x 0.25 24 5.8 32.4 58.0 16526 19 x 0.5 20 11.3 156.0 246.0
20033 7 x 0.25 24 5.8 35.0 64.0 16014 20 x 0.5 20 12.0 173.0 275.0
20034 8 x 0.25 24 7.0 42.1 82.0 16015 24 x 0.5 20 13.2 236.0 337.0
20035 10 x 0.25 24 7.3 49.9 85.0 16016 25 x 0.5 20 13.7 250.0 351.0
20036 12 x 0.25 24 7.5 58.0 90.0 16527 27 x 0.5 20 13.8 265.0 373.0
20037 14 x 0.25 24 8.1 62.0 98.0 16017 30 x 0.5 20 14.2 297.0 396.0
20038 16 x 0.25 24 8.5 67.0 110.0 16018 32 x 0.5 20 14.7 301.0 431.0
20039 18 x 0.25 24 9.1 78.0 142.0 16164 34 x 0.5 20 15.4 312.0 440.0
20086 19 x 0.25 24 9.1 79.0 146.0 16019 36 x 0.5 20 15.5 320.0 445.0
13.01.2021 / We reserve the right to make technical changes; the imprint in the image is purely exemplary

20040 20 x 0.25 24 9.5 88.0 152.0 16528 37 x 0.5 20 15.5 325.0 458.0
20041 21 x 0.25 24 9.6 91.0 150.0 16020 40 x 0.5 20 16.4 345.0 470.0
20042 24 x 0.25 24 10.4 96.0 163.0 16021 50 x 0.5 20 18.2 407.0 570.0
20092 25 x 0.25 24 10.6 99.0 169.0 16022 61 x 0.5 20 19.2 508.0 650.0
20043 27 x 0.25 24 10.7 122.0 176.0 16026 2 x 0.75 19 5.8 38.0 59.0
20044 30 x 0.25 24 11.1 132.0 189.0 16027 3 x 0.75 19 6.3 50.0 66.0
20045 32 x 0.25 24 11.5 138.0 204.0 16028 4 x 0.75 19 6.8 57.0 77.0
20046 36 x 0.25 24 11.9 146.0 219.0 16029 5 x 0.75 19 7.4 70.0 93.0
20087 37 x 0.25 24 11.9 152.0 230.0 16030 6 x 0.75 19 8.2 87.0 113.0
20047 40 x 0.25 24 12.9 157.0 247.0 16031 7 x 0.75 19 8.2 96.0 130.0
20048 42 x 0.25 24 13.0 160.0 269.0 16032 8 x 0.75 19 9.7 110.0 145.0
20049 44 x 0.25 24 13.7 162.0 292.0 16033 10 x 0.75 19 10.3 140.0 180.0
20050 48 x 0.25 24 13.9 168.0 317.0 16034 12 x 0.75 19 10.5 151.0 202.0
20051 52 x 0.25 24 14.3 175.0 330.0 16035 14 x 0.75 19 11.3 167.0 225.0
20052 56 x 0.25 24 14.7 189.0 343.0 16036 16 x 0.75 19 11.9 183.0 275.0
20053 61 x 0.25 24 15.2 204.0 365.0 16037 18 x 0.75 19 12.7 207.0 292.0
20056 2 x 0.34 22 4.9 18.0 30.0 16529 19 x 0.75 19 12.7 221.0 322.0
20057 3 x 0.34 22 5.1 22.0 37.0 16038 20 x 0.75 19 13.6 238.0 362.0
20058 4 x 0.34 22 5.5 28.0 48.0 16039 24 x 0.75 19 14.9 270.0 435.0
20059 5 x 0.34 22 6.0 31.0 54.0 16040 25 x 0.75 19 15.0 278.0 415.0
20085 6 x 0.34 22 6.6 45.0 61.0 16041 27 x 0.75 19 15.1 287.0 467.0
20060 7 x 0.34 22 6.6 51.0 67.0 16042 30 x 0.75 19 16.0 315.0 486.0
20061 8 x 0.34 22 7.7 54.0 81.0 16043 32 x 0.75 19 16.5 330.0 530.0
20062 10 x 0.34 22 8.4 65.0 103.0 16163 34 x 0.75 19 17.1 350.0 570.0
20063 12 x 0.34 22 8.6 70.0 110.0 16044 36 x 0.75 19 17.4 370.0 600.0
20064 14 x 0.34 22 9.0 81.0 153.0 16530 37 x 0.75 19 17.4 386.0 640.0
20065 16 x 0.34 22 9.6 88.0 159.0 16045 40 x 0.75 19 18.7 395.0 680.0
20066 18 x 0.34 22 10.1 103.0 172.0 16120 42 x 0.75 19 18.9 408.0 714.0
20089 19 x 0.34 22 10.1 106.0 181.0 16047 61 x 0.75 19 22.0 555.0 900.0
20067 20 x 0.34 22 10.8 112.0 191.0 16475 2 x 1 18 6.4 46.0 65.0

Continued on next page

 TRONIC-CY (LiY-CY) / TRONIC-DY (LiY-DY)
colour code DIN 47100, without colour repetition, EMC-preferred type

TRONIC-CY (LiY-CY), braided screen of tinned copper wires

Part no. No. cores x AWG, Outer Cu-weight Weight Part no. No. cores x AWG, Outer Cu-weight Weight
cross-sec. approx. Ø mm, kg/km kg/km, cross-sec. approx. Ø mm, kg/km kg/km,
mm² approx. approx. mm² approx. approx.
16476 3 x 1 18 6.7 56.0 80.0 16501 3 x 1.5 16 7.4 76.0 100.0
16477 4 x 1 18 7.2 69.0 98.0 16502 4 x 1.5 16 8.1 98.0 126.0
16478 5 x 1 18 8.0 89.0 127.0 16503 5 x 1.5 16 9.0 116.0 160.0
16479 6 x 1 18 8.7 105.0 144.0 16504 6 x 1.5 16 9.8 140.0 192.0
16480 7 x 1 18 8.7 111.0 158.0 16505 7 x 1.5 16 9.8 152.0 208.0
16481 8 x 1 18 10.3 130.0 197.0 16506 8 x 1.5 16 11.0 172.0 244.0
16482 10 x 1 18 11.2 140.0 232.0 16507 10 x 1.5 16 12.6 193.0 315.0
16483 12 x 1 18 11.4 168.0 260.0 16508 12 x 1.5 16 12.8 254.0 338.0
16484 14 x 1 18 12.0 198.0 302.0 16509 14 x 1.5 16 13.5 272.0 383.0
16485 16 x 1 18 12.8 218.0 346.0 16510 16 x 1.5 16 14.6 285.0 424.0
16486 19 x 1 18 13.6 268.0 412.0 16511 19 x 1.5 16 15.6 387.0 506.0
16487 24 x 1 18 16.0 320.0 493.0 16512 24 x 1.5 16 18.1 448.0 690.0
16488 27 x 1 18 16.4 360.0 562.0 16513 27 x 1.5 16 18.7 506.0 781.0
16489 37 x 1 18 18.6 485.0 790.0 16514 37 x 1.5 16 21.4 682.0 941.0
16500 2 x 1.5 16 7.0 63.0 88.0
13.01.2021 / We reserve the right to make technical changes; the imprint in the image is purely exemplary