TR 3

Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT™, Molded Case, Low ESR
FEATURES
• Low ESR
• Surge current tested:
Available
cases A and B - selected ratings
cases C, D, E, and W - all ratings
Available
• Qualified to EIA-717
• Molded case available in seven case codes
• High ripple current carrying capability
Available
• Terminations: 100 % matte tin standard,
tin / lead available
• Compatible with “high volume” automatic pick and place
equipment
LINKS TO ADDITIONAL RESOURCES • Compliant terminations
• Moisture sensitivity level 1
3D 3D
3D Models Calculators Related Did You Technical
• Material categorization: for definitions of compliance
Documents Know? Notes please see www.vishay.com/doc?99912
Note
PERFORMANCE / ELECTRICAL * This datasheet provides information about parts that are
CHARACTERISTICS RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
www.vishay.com/doc?40192 Please see the information / tables in this datasheet for details
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required) APPLICATIONS
Capacitance Range: 0.47 μF to 1000 μF • Industrial
Capacitance Tolerance: ± 10 %, ± 20 % • Telecom infrastructure
Voltage Rating: 4 VDC to 75 VDC • Consumer
Note • Computer
• For recommended voltage derating guidelines see “Typical
• General purpose
Performance Characteristics”
ORDERING INFORMATION
TR3 D 107 K 010 C 0100
TYPE CASE CODE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION AND ESR
TOLERANCE RATING AT +85 °C PACKAGING
See Ratings This is expressed K = ± 10 % This is expressed Matte tin Maximum 100 kHz
and Case in picofarads. M = ± 20 % in V. To complete C = 7" (178 mm) reel ESR in mΩ.
Codes table The first two the three-digit D = 13" (330 mm) reel See note below.
digits are the block, zeros precede
significant figures. the voltage rating. V = 7" (178 mm) reel,
The third is the A decimal point is dry pack
number of zeros indicated by an “R” U = 13" (330 mm) reel,
to follow. (6R3 = 6.3 V). dry pack
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting
• Dry pack as specified in J-STD-033
Revision: 21-Nov-2023 1 Document Number: 40080

For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TR3
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]

L
W TW
TH H
Glue Pad
(MIN.)
Glue Pad P
CASE CODE EIA SIZE L W H P TW TH (MIN.)

0.126 ± 0.008 0.063 ± 0.008 0.063 ± 0.008 0.031 ± 0.012 0.047 ± 0.004 0.028
A 3216-18
[3.2 ± 0.20] [1.6 ± 0.20] [1.6 ± 0.20] [0.80 ± 0.30] [1.2 ± 0.10] [0.70]
0.138 ± 0.008 0.110 ± 0.008 0.075 ± 0.008 0.031 ± 0.012 0.087 ± 0.004 0.028
B 3528-21
[3.5 ± 0.20] [2.8 ± 0.20] [1.9 ± 0.20] [0.80 ± 0.30] [2.2 ± 0.10] [0.70]
0.236 ± 0.012 0.126 ± 0.012 0.098 ± 0.012 0.051 ± 0.012 0.087 ± 0.004 0.039
C 6032-28
[6.0 ± 0.30] [3.2 ± 0.30] [2.5 ± 0.30] [1.3 ± 0.30] [2.2 ± 0.10] [1.0]
0.287 ± 0.012 0.170 ± 0.012 0.110 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039
D 7343-31
[7.3 ± 0.30] [4.3 ± 0.30] [2.8 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0]
0.287 ± 0.012 0.169 ± 0.012 0.157 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039
E 7343-43
[7.3 ± 0.30] [4.3 ± 0.30] [4.0 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0]
0.287 ± 0.012 0.236 ± 0.012 0.138 ± 0.012 0.047 ± 0.008 0.122 ± 0.004 0.069
W 7361-38
[7.3 ± 0.30] [6.0 ± 0.30] [3.5 ± 0.30] [1.2 ± 0.20] [3.1 ± 0.10] [1.75]
Note
• Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option)
RATINGS AND CASE CODES

μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V 75 V
0.15 A (10.0)
0.22 A (6.00) A (10.0)
0.33 A (6.00) A (7.00)
0.47 A (7.00) A (4.00), B (6.00),

B (4.00) C (2.30)
0.68 A (6.00) A (6.00, 4.00)
A (6.00, 4.00, B (4.00, 2.00), D (3.00,

1.0 A (6.20) A (5.50, 3.00) A (4.00) 3.00),
B (2.00) C (1.60) 1.50)
B (2.00),
A (4.00, 3.00), B (3.00, 2.00), B (2.00), C (2.00),
1.5 A (3.00) B (1.80) C (2.50, 0.90) C (1.50) D (2.00,
1.00)
A (4.00), B (2.50, 2.00, B (2.00),
2.2 A (6.80, 6.00, A (4.00, 3.50, A (4.00, 3.00) B (1.70, 1.50, 1.50), C (1.50), D (1.50)
1.80) 1.80)
1.20, 0.90) C (1.50, 0.90) D (0.80)
A (3.50, 3.00), B (1.50, 1.00),
3.3 A (2.10) A (4.00, 3.50), A (4.00), B (2.00, 1.50, C (0.80, 0.70, C (1.50), D (1.00, D (1.20,
B (2.50) B (1.30) D (0.80) 0.80) 1.00, 0.80)
0.75) 0.60)
A (3.50, 3.00), B (1.50, 1.00, C (1.00, 0.70,
A (3.00, 1.50, A (3.00, 2.50, B (1.50, 1.00, 0.70), 0.50),
A (3.50, 1.80), D (0.70,
4.7 1.40, 1.00), 2.00, 1.50), B (1.00, 0.75) 0.90, 0.70), C (0.70, 0.60, D (0.70, 0.60, 0.50) E (1.50)
B (1.40) B (1.50, 0.80) C (0.60, 0.50), 0.50, 0.30),
0.525) D (0.70) E (0.60, 0.30)
A (3.20, 3.00, B (2.00, 1.50, C (0.90, 0.475), D (0.70, 0.60,

A (3.00, 1.80),A (3.00, 1.50), 1.20, 0.70, D (0.50, 0.40,
6.8 A (1.80) B (1.30) B (1.20, 0.60) 2.60), 0.50, 0.40), 0.30), 0.50, 0.30),
B (1.00, 0.60) E (0.55, 0.50)
C (0.60, 0.50) E (0.30)
Note
• ESR limits in Ω are shown in parenthesis

TR3
www.vishay.com
Vishay Sprague

μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V 75 V
C (1.20, 0.45),
B (1.30, 1.10, D (0.70, 0.55,
A (2.00, 1.80, A (1.70), B (1.00, 0.50), D (0.40, 0.30,
0.90, 0.45), 0.45),
A (2.00, 1.50), 1.00, 0.90), B (0.80, 0.50), C (0.70, 0.50, 0.26, 0.25,
10 C (0.60, 0.50, E (0.70, 0.55, E (0.60)
B (1.50) B (1.00, 0.80, C (0.60, 0.50, 0.475, 0.45, 0.20, 0.135,
0.45, 0.30), 0.50, 0.40,
0.75) 0.45) 0.40) 0.125),
D (0.40, 0.30) 0.30)
E (0.25, 0.20)
B (1.00, 0.80,
C (0.60, 0.40),
0.60),
D (0.35, 0.30,
A (2.00, 1.00), C (0.90,
B (0.80, 0.50),B (1.00, 0.50), 0.26, 0.225, E (0.40, 0.30,
15 A (1.50) A (2.00, 1.00) B (0.60, 0.45, 0.425),
C (0.40) C (0.40) 0.20, 0.150), 0.25, 0.20)
0.70), C (0.70) D (0.35,
E (0.30, 0.225,
0.275, 0.25,
0.20, 0.150)
0.20)
A (1.50, 1.00, B (0.80, 0.70, C (1.00, 0.90,
B (1.00, 0.70, D (0.40, 0.30,
A (3.00, 2.00, 0.90, 0.80), 0.60, 0.40), 0.425, 0.40,
0.60, 0.40), 0.275, 0.250,
1.00, 0.90), B (1.00, 0.70, C (0.40, 0.30, 0.275,
22 A (1.50) C (0.375, 0.20),
B (0.60), 0.50, 0.40), 0.375), 0.250),
0.350), E (0.30, 0.275,
C (0.50) C (0.40, D (0.30, D (0.30, 0.20),
D (0.25) 0.260, 0.20)
0.345, 0.30) 0.225, 0.20) E (0.30, 0.20)
B (0.140, B (0.70, 0.50,
A (2.00, 0.80, 0.65, 0.60, 0.35), C (0.35, 0.30, D (0.40, 0.30,
A (1.50), 0.60), 0.50, 0.425, C (0.30, 0.20), 0.225, 0.20), D (0.40, 0.25),
33
B (0.50) B (0.45, 0.35, 0.30), 0.225), D (0.40, 0.25, E (0.30, 0.20, E (0.40, 0.25)
0.60, 0.50) C (0.375, D (0.25, 0.20) 0.175)
0.30) 0.225, 0.15)
B (0.65, 0.60,
D (0.35, 0.25,
0.50, 0.35), C (0.50, 0.35, D (0.20,
A (0.80), 0.20, 0.15,
C (0.35, 0.30, 0.30), 0.175, 0.15,
A (0.80, 0.50), B (0.55, 0.50, 0.125, 0.10), E
47 0.20), D (0.20, 0.15, 0.10),
B (0.50) 0.35, 0.25), E (0.30, 0.20, (0.40, 0.20) (1)
D (0.22, 0.20, 0.12, 0.10, E (0.15,
C (0.30, 0.25) 0.15, 0.125,
0.14, 0.135, 0.080, 0.070) 0.125)
0.10)
0.10)
B (1.50, 0.90,
B (0.65, 0.55,
0.75, 0.60),
0.50, 0.35, D (0.20,
C (0.30,
0.25), 0.175, 0.15,
B (0.50), 0.275, 0.225 D (0.15, 0.10, E (0.25,
68 C (0.275, 0.115),
C (0.275) 0.20), 0.070) 0.125)
0.25, 0.20), E (0.20, 0.15,
D (0.20, 0.15,
D (0.20, 0.125, 0.12)
0.10, 0.07),
0.175)
E (0.15)
B (1.40),
D (0.20, 0.15,
B (1.50, 0.50, C (0.20, 0.15,
D (0.15, 0.10, 0.085,
0.40, 0.25), 0.10),
A (1.00), 0.125, 0.10, 0.08),
C (0.30, 0.25, D (0.15, 0.10, W (0.20, 0.15,
100 B (0.45), 0.075), E (0.20, 0.15,
0.15, 0.125, 0.08, 0.07, 0.10)
C (0.225) E (0.15, 0.10),
0.10), 0.065, 0.05),
0.125, 0.10) W (0.20, 0.10,
D (0.15, 0.14) E (0.125,
0.08, 0.06)
0.15, 0.10)
D (0.40, 0.15,
0.125, 0.10,
C (0.30, 0.20),
C (0.50), 0.085, 0.075,
B (0.90, 0.50, D (0.15,
D (0.15, 0.10, 0.060),
0.40), 0.125, W (0.20, 0.15,
150 0.075, 0.07, E (0.40, 0.15,
C (0.25), 0.075, 0.07, 0.10, 0.08)
0.05), 0.10, 0.075,
D (0.15) 0.05),
E (0.10, 0.08) 0.060),
E (0.10)
W (0.075,
0.060)
D (0.15,
B (1.10, 0.70, C (0.30, 0.25,
0.125, 0.10,
0.50, 0.45), 0.225),
0.05), E (0.15,
220 C (0.20), D (0.15, 0.10,
E (0.15, 0.10, 0.125, 0.10)
D (0.05, 0.15, 0.05),
0.070, 0.060,
0.10) E (0.15, 0.10)
0.050)
Notes
(1) 125 °C life test post test limits per AEC-Q200

TR3
www.vishay.com
Vishay Sprague

μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V 75 V
D (0.15,
0.125, 0.10,
0.06, 0.05, D (0.15,
0.125, 0.10),
330 D (0.10, 0.45, 0.45, 0.35), E (0.10, 0.06),
0.035, 0.15) E (0.15, 0.10,
0.05), W (0.10, 0.06,
0.04)
W (0.10, 0.06,
0.04)
D (0.20, 0.15,
D (0.125, 0.125, 0.10), E (0.20, 0.15,
0.10, 0.06, E (0.10,
470 0.045, 0.035) 0.065, 0.06, 0.10, 0.075),
W (0.10, 0.06,
E (0.10, 0.05), 0.05)
0.045, 0.035) W (0.10, 0.06,
0.05)
D (0.10, 0.06),
680 E (0.10, 0.04) E (0.10)
E (0.20, 0.15,
1000 E (0.10) 0.10),
W (0.05)
Note
MARKING
“A” CASE VOLTAGE CODE
Indicates Voltage Indicates
Capacitance code, pF VOLTS CODE
lead (Pb)-free Capacitance, μF lead (Pb)-free
4.0 G
Date code 6.3 J
designation
10 A 22 10L
V 104L Polarity
16 C band (+)
20 D XX 2
Voltage 25 E
code Date code Vishay marking
Polarity band (+) 35 V
A Case 50 T B, C, D, E, W Cases
75 S
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines,
depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility
designation. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors, for details see FAQ: www.vishay.com/doc?40110.
Capacitors may bear different marking scheme if parts are substituted with high performance Vishay Automotive Grade TP3 family or low
DCL TX3 family products. Marking examples are shown below.
Call the factory for further explanation.
ADDITIONAL MARKING EXAMPLES

TP3 MARKING
Capacitance Indicates Indicates

code, pF high performance (1) high performance (1)
Capacitance
Date code μF
designation Voltage
V 104Z Polarity 22 P10

band (+)
XX 2
Voltage
Polarity band (+) code Date code Vishay marking
A Case B, C, D, E Cases
Note
(1)
Capital letter indicates lead (Pb)-free

TR3
www.vishay.com
Vishay Sprague
ADDITIONAL MARKING EXAMPLES

TX3 MARKING
Indicates low DCL
Capacitance, µF product series (1) Rated voltage, V
22X16
Polarity
band (+)
YY 2
2 digits date code Vishay marking

B, C Cases
Note
(1) Capital letter indicates lead (Pb)-free
STANDARD RATINGS
MAX. DF MAX. ESR MAX. RIPPLE
CAPACITANCE CASE MAX. DCL AT +25 °C AT +25 °C 100 kHz
PART NUMBER AT +25 °C
(μF) CODE (μA) 120 Hz 100 kHz IRMS
(%) (Ω) (A)
4 VDC AT +85 °C; 2.7 VDC AT +125 °C
15 A TR3A156(1)004(2)1500 0.6 6 1.500 0.22
22 A TR3A226(1)004(2)1500 0.9 6 1.500 0.22
33 A TR3A336(1)004(2)1500 1.3 6 1.500 0.22
33 B TR3B336(1)004(2)0500 1.3 6 0.500 0.41
47 A TR3A476(1)004(2)0800 1.9 14 0.800 0.31
47 A TR3A476(1)004(2)0500 1.9 14 0.500 0.39
47 B TR3B476(1)004(2)0500 1.9 6 0.500 0.41
68 B TR3B686(1)004(2)0500 2.7 6 0.500 0.41
68 C TR3C686(1)004(2)0275 2.7 6 0.275 0.63
100 A TR3A107M004(2)1000 10.0 30 1.000 0.27
100 B TR3B107(1)004(2)0450 4.0 8 0.450 0.43
100 C TR3C107(1)004(2)0225 4.0 6 0.225 0.70
150 B TR3B157(1)004(2)0900 6.0 14 0.900 0.31
150 B TR3B157(1)004(2)0500 6.0 14 0.500 0.41
150 B TR3B157(1)004(2)0400 6.0 14 0.400 0.46
150 C TR3C157(1)004(2)0250 6.0 12 0.250 0.66
150 D TR3D157(1)004(2)0150 6.0 8 0.150 1.00
220 B TR3B227M004(2)1100 8.8 18 1.100 0.28
220 B TR3B227M004(2)0700 8.8 18 0.700 0.35
220 B TR3B227M004(2)0500 8.8 18 0.500 0.41
220 B TR3B227M004(2)0450 8.8 18 0.450 0.43
220 C TR3C227(1)004(2)0200 8.8 8 0.200 0.74
220 D TR3D227(1)004(3)0050 8.8 8 0.050 1.73
220 D TR3D227(1)004(2)0150 8.8 8 0.150 1.00
220 D TR3D227(1)004(2)0100 8.8 8 0.100 1.22
330 D TR3D337(1)004(2)0100 13.2 8 0.100 1.22
330 D TR3D337(1)004(3)0045 13.2 8 0.045 1.83
330 D TR3D337(1)004(3)0035 13.2 8 0.035 2.07
330 D TR3D337(1)004(2)0150 13.2 8 0.150 1.00
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
CAPACITANCE CASE PART NUMBER AT +25 °C AT +25 °C AT +25 °C 100 kHz
(μF) CODE 120 Hz 100 kHz IRMS
(μA) (%) (Ω) (A)
4 VDC AT +85 °C; 2.7 VDC AT +125 °C
470 D TR3D477(1)004(2)0125 18.8 10 0.125 1.10
470 D TR3D477(1)004(2)0100 18.8 10 0.100 1.22
470 D TR3D477(1)004(2)0060 18.8 10 0.060 1.58
470 D TR3D477(1)004(3)0045 18.8 10 0.045 1.83
470 D TR3D477(1)004(3)0035 18.8 10 0.035 2.07
470 E TR3E477(1)004(2)0100 18.8 10 0.100 1.28
470 E TR3E477(1)004(3)0045 18.8 10 0.045 1.91
470 E TR3E477(1)004(3)0035 18.8 10 0.035 2.17
680 D TR3D687M004(2)0100 27.2 25 0.100 1.22
680 D TR3D687M004(3)0060 27.2 25 0.060 1.58
680 E TR3E687(1)004(2)0100 27.2 12 0.100 1.28
680 E TR3E687(1)004(3)0040 27.2 12 0.040 1.37
1000 E TR3E108M004(2)0100 40.0 20 0.100 1.28
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
3.3 A TR3A335(1)6R3(2)2100 0.5 6 2.100 0.19
6.8 A TR3A685(1)6R3(2)1800 0.5 6 1.800 0.20
10 A TR3A106(1)6R3(2)2000 0.6 6 2.000 0.19
10 A TR3A106(1)6R3(2)1500 0.6 6 1.500 0.22
10 B TR3B106(1)6R3(2)1500 0.6 6 1.500 0.24
15 A TR3A156(1)6R3(2)2000 0.9 6 2.000 0.19
15 A TR3A156(1)6R3(2)1000 0.9 6 1.000 0.27
22 A TR3A226(1)6R3(2)3000 1.4 6 3.000 0.16
22 A TR3A226(1)6R3(2)2000 1.4 6 2.000 0.19
22 A TR3A226(1)6R3(2)1000 1.4 6 1.000 0.27
22 A TR3A226(1)6R3(2)0900 1.4 6 0.900 0.29
22 B TR3B226(1)6R3(2)0600 1.4 6 0.600 0.38
22 C TR3C226(1)6R3(2)0500 1.3 6 0.500 0.47
33 A TR3A336(1)6R3(2)2000 2.0 14 2.000 0.19
33 A TR3A336(1)6R3(2)0800 2.0 14 0.800 0.31
33 A TR3A336(1)6R3(2)0600 2.0 14 0.600 0.35
33 B TR3B336(1)6R3(2)0450 2.0 6 0.450 0.43
33 B TR3B336(1)6R3(2)0350 2.0 6 0.350 0.49
33 B TR3B336(1)6R3(2)0600 2.0 6 0.600 0.38
33 B TR3B336(1)6R3(2)0500 2.0 6 0.500 0.41
47 A TR3A476(1)6R3(2)0800 3.0 12 0.800 0.31
47 B TR3B476(1)6R3(2)0550 3.0 6 0.550 0.39
47 B TR3B476(1)6R3(2)0500 3.0 6 0.500 0.41
47 B TR3B476(1)6R3(2)0350 3.0 6 0.350 0.49
47 B TR3B476(1)6R3(2)0250 3.0 6 0.250 0.58
47 C TR3C476(1)6R3(2)0300 3.0 6 0.300 0.61
47 C TR3C476(1)6R3(2)0250 3.0 6 0.250 0.66
68 B TR3B686(1)6R3(2)0650 4.3 6 0.650 0.36
68 B TR3B686(1)6R3(2)0550 4.3 6 0.550 0.39
68 B TR3B686(1)6R3(2)0500 4.3 6 0.500 0.41
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
68 B TR3B686(1)6R3(2)0350 4.3 6 0.350 0.49
68 B TR3B686(1)6R3(2)0250 4.3 6 0.250 0.58
68 C TR3C686(1)6R3(2)0275 4.3 6 0.275 0.63
68 C TR3C686(1)6R3(2)0250 4.3 6 0.250 0.66
68 C TR3C686(1)6R3(2)0200 4.3 6 0.200 0.74
68 D TR3D686(1)6R3(2)0200 4.3 6 0.200 0.87
68 D TR3D686(1)6R3(2)0175 4.3 4 0.175 0.93
100 B TR3B107(1)6R3(2)1500 6.3 15 1.500 0.24
100 B TR3B107(1)6R3(2)0500 6.3 15 0.500 0.41
100 B TR3B107(1)6R3(2)0400 6.3 15 0.400 0.46
100 B TR3B107(1)6R3(2)0250 6.3 15 0.250 0.58
100 C TR3C107(1)6R3(2)0300 6.3 6 0.300 0.61
100 C TR3C107(1)6R3(2)0250 6.3 6 0.250 0.66
100 C TR3C107(1)6R3(2)0150 6.3 6 0.150 0.86
100 C TR3C107(1)6R3(2)0125 6.3 6 0.125 0.94
100 C TR3C107(1)6R3(2)0100 6.3 6 0.100 1.05
100 D TR3D107(1)6R3(2)0150 6.3 6 0.150 1.00
100 D TR3D107(1)6R3(2)0140 6.3 6 0.140 1.04
150 C TR3C157(1)6R3(2)0300 9.4 8 0.300 0.61
150 C TR3C157(1)6R3(2)0200 9.4 8 0.200 0.74
150 D TR3D157(1)6R3(2)0150 9.4 8 0.150 1.00
150 D TR3D157(1)6R3(2)0125 9.4 8 0.125 1.10
150 D TR3D157(1)6R3(2)0075 9.4 8 0.075 1.41
150 D TR3D157(1)6R3(2)0070 9.4 8 0.070 1.46
150 D TR3D157(1)6R3(3)0050 9.4 8 0.050 1.73
150 E TR3E157(1)6R3(2)0100 9.4 8 0.100 1.28
220 C TR3C227(1)6R3(2)0300 13.9 14 0.300 0.61
220 C TR3C227(1)6R3(2)0250 13.9 14 0.250 0.66
220 C TR3C227(1)6R3(2)0225 13.9 14 0.225 0.70
220 D TR3D227(1)6R3(2)0150 13.9 8 0.150 1.00
220 D TR3D227(1)6R3(2)0100 13.9 8 0.100 1.22
220 D TR3D227(1)6R3(3)0050 13.9 8 0.050 1.73
220 E TR3E227(1)6R3(2)0150 13.9 8 0.150 1.05
220 E TR3E227(1)6R3(2)0100 13.9 8 0.100 1.28
330 D TR3D337(1)6R3(2)0150 20.8 8 0.150 1.00
330 D TR3D337(1)6R3(2)0125 20.8 8 0.125 1.10
330 D TR3D337(1)6R3(2)0100 20.8 8 0.100 1.22
330 D TR3D337(1)6R3(2)0060 20.8 8 0.060 1.58
330 D TR3D337(1)6R3(3)0050 20.8 8 0.050 1.73
330 D TR3D337(1)6R3(3)0045 20.8 8 0.045 1.83
330 D TR3D337(1)6R3(3)0035 20.8 8 0.035 2.07
330 E TR3E337(1)6R3(3)0150 20.8 8 0.150 1.05
330 E TR3E337(1)6R3(2)0100 20.8 8 0.100 1.28
330 E TR3E337(1)6R3(2)0050 20.8 8 0.050 1.82
330 W TR3W337(1)6R3(3)0100 20.8 8 0.100 1.58
330 W TR3W337(1)6R3(3)0060 20.8 8 0.060 2.04
330 W TR3W337(1)6R3(3)0040 20.8 8 0.040 2.50
470 D TR3D477(1)6R3(2)0200 29.6 14 0.200 0.87
470 D TR3D477(1)6R3(2)0150 29.6 14 0.150 1.00
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
470 D TR3D477(1)6R3(2)0125 29.6 14 0.125 1.10
470 D TR3D477(1)6R3(3)0100 29.6 14 0.100 1.22
470 E TR3E477(1)6R3(2)0100 29.6 10 0.100 1.28
470 E TR3E477(1)6R3(3)0065 29.6 10 0.065 1.59
470 E TR3E477(1)6R3(3)0060 29.6 10 0.060 1.66
470 E TR3E477(1)6R3(3)0050 29.6 10 0.050 1.82
470 W TR3W477(1)6R3(3)0100 29.6 20 0.100 1.58
470 W TR3W477(1)6R3(3)0060 29.6 20 0.060 2.04
470 W TR3W477(1)6R3(3)0050 29.6 20 0.050 2.24
680 E TR3E687(1)6R3(2)0100 42.8 20 0.100 1.28
1000 E TR3E108M6R3(2)0200 63.0 30 0.200 0.91
1000 E TR3E108M6R3(2)0150 63.0 30 0.150 1.05
1000 E TR3E108M6R3(3)0100 63.0 30 0.100 1.28
1000 W TR3W108(1)6R3(3)0050 60.0 16 0.050 2.24
10 VDC AT +85 °C; 7 VDC AT +125 °C
2.2 A TR3A225(1)010(2)6800 0.5 6 6.800 0.11
2.2 A TR3A225(1)010(2)6000 0.5 6 6.000 0.11
2.2 A TR3A225(1)010(2)1800 0.5 6 1.800 0.20
4.7 A TR3A475(1)010(2)3000 0.5 6 3.000 0.16
4.7 A TR3A475(1)010(2)1500 0.5 6 1.500 0.22
4.7 A TR3A475(1)010(2)1400 0.5 6 1.400 0.23
4.7 A TR3A475(1)010(2)1000 0.5 6 1.000 0.27
4.7 B TR3B475(1)010(2)1400 0.5 6 1.400 0.25
6.8 A TR3A685(1)010(2)3000 0.7 6 3.000 0.16
6.8 A TR3A685(1)010(2)1800 0.7 6 1.800 0.20
6.8 B TR3B685(1)010(2)1300 0.7 6 1.300 0.26
10 A TR3A106(1)010(2)2000 1.0 6 2.000 0.19
10 A TR3A106(1)010(2)1800 1.0 6 1.800 0.20
10 A TR3A106(1)010(2)1000 1.0 6 1.000 0.27
10 A TR3A106(1)010(2)0900 1.0 6 0.900 0.29
10 B TR3B106(1)010(2)1000 1.0 6 1.000 0.29
10 B TR3B106(1)010(2)0800 1.0 6 0.800 0.33
10 B TR3B106(1)010(2)0750 1.0 6 0.750 0.34
15 A TR3A156(1)010(2)2000 1.5 6 2.000 0.19
15 A TR3A156(1)010(2)1000 1.5 6 1.000 0.27
15 B TR3B156(1)010(2)0600 1.5 6 0.600 0.38
15 B TR3B156(1)010(2)0450 1.5 6 0.450 0.43
15 B TR3B156(1)010(2)0700 1.5 6 0.700 0.35
15 C TR3C156(1)010(2)0700 1.5 6 0.700 0.40
22 A TR3A226(1)010(2)1500 2.2 8 1.500 0.22
22 A TR3A226(1)010(2)1000 2.2 8 1.000 0.27
22 A TR3A226(1)010(2)0900 2.2 8 0.900 0.29
22 A TR3A226(1)010(2)0800 2.2 8 0.800 0.31
22 B TR3B226(1)010(2)1000 2.2 6 1.000 0.29
22 B TR3B226(1)010(2)0700 2.2 6 0.700 0.35
22 B TR3B226(1)010(2)0500 2.2 6 0.500 0.41
22 B TR3B226(1)010(2)0400 2.2 6 0.400 0.46
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
10 VDC AT +85 °C; 7 VDC AT +125 °C
22 C TR3C226(1)010(2)0400 2.2 6 0.400 0.52
22 C TR3C226(1)010(2)0345 2.2 6 0.345 0.56
22 C TR3C226(1)010(2)0300 2.2 6 0.300 0.61
33 B TR3B336(1)010(2)1400 3.3 6 1.400 0.25
33 B TR3B336(1)010(2)0650 3.3 6 0.650 0.36
33 B TR3B336(1)010(2)0600 3.3 6 0.600 0.38
33 B TR3B336(1)010(2)0500 3.3 6 0.500 0.41
33 B TR3B336(1)010(2)0425 3.3 6 0.425 0.45
33 B TR3B336(1)010(2)0300 3.3 6 0.300 0.53
33 C TR3C336(1)010(2)0375 3.3 6 0.375 0.54
33 C TR3C336(1)010(2)0300 3.3 6 0.300 0.61
47 B TR3B476(1)010(2)0650 4.7 6 0.650 0.36
47 B TR3B476(1)010(2)0600 4.7 6 0.600 0.38
47 B TR3B476(1)010(2)0500 4.7 6 0.500 0.41
47 B TR3B476(1)010(2)0350 4.7 6 0.350 0.49
47 C TR3C476(1)010(2)0350 4.7 6 0.350 0.56
47 C TR3C476(1)010(2)0300 4.7 6 0.300 0.61
47 C TR3C476(1)010(2)0200 4.7 6 0.200 0.74
47 D TR3D476(1)010(2)0220 4.7 6 0.220 0.83
47 D TR3D476(1)010(2)0200 4.7 6 0.200 0.87
47 D TR3D476(1)010(2)0140 4.7 6 0.140 1.04
47 D TR3D476(1)010(2)0135 4.7 6 0.135 1.05
47 D TR3D476(1)010(2)0100 4.7 6 0.100 1.22
68 B TR3B686(1)010(2)1500 6.8 14 1.500 0.24
68 B TR3B686(1)010(2)0900 6.8 14 0.900 0.31
68 B TR3B686(1)010(2)0750 6.8 14 0.750 0.34
68 B TR3B686(1)010(2)0600 6.8 14 0.600 0.38
68 C TR3C686(1)010(2)0300 6.8 6 0.300 0.61
68 C TR3C686(1)010(2)0275 6.8 6 0.275 0.63
68 C TR3C686(1)010(2)0225 6.8 6 0.225 0.70
68 C TR3C686(1)010(2)0200 6.8 6 0.200 0.74
68 D TR3D686(1)010(2)0200 6.8 6 0.200 0.87
68 D TR3D686(1)010(2)0150 6.8 6 0.150 1.00
68 D TR3D686(1)010(2)0100 6.8 6 0.100 1.22
68 D TR3D686(1)010(3)0070 6.8 6 0.070 1.46
68 E TR3E686(1)010(2)0150 6.8 4 0.150 1.05
100 B TR3B107M010(2)1400 10.0 25 1.400 0.25
100 C TR3C107(1)010(2)0200 10.0 8 0.200 0.74
100 C TR3C107(1)010(2)0150 10.0 8 0.150 0.86
100 C TR3C107(1)010(2)0100 10.0 8 0.100 1.05
100 D TR3D107(1)010(2)0150 10.0 6 0.150 1.00
100 D TR3D107(1)010(2)0100 10.0 6 0.100 1.22
100 D TR3D107(1)010(2)0080 10.0 6 0.080 1.37
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
10 VDC AT +85 °C; 7 VDC AT +125 °C
100 D TR3D107(1)010(3)0070 10.0 6 0.070 1.52
100 D TR3D107(1)010(3)0065 10.0 6 0.065 1.46
100 D TR3D107(1)010(3)0050 10.0 6 0.050 1.73
100 E TR3E107(1)010(2)0125 10.0 6 0.125 1.15
100 E TR3E107(1)010(2)0150 10.0 6 0.150 1.05
100 E TR3E107(1)010(2)0100 10.0 6 0.100 1.28
150 C TR3C157(1)010(2)0500 15.0 20 0.500 0.47
150 D TR3D157(1)010(2)0150 15.0 8 0.150 1.00
150 D TR3D157(1)010(2)0100 15.0 8 0.100 1.22
150 D TR3D157(1)010(2)0075 15.0 8 0.075 1.41
150 D TR3D157(1)010(3)0070 15.0 8 0.070 1.46
150 D TR3D157(1)010(3)0050 15.0 8 0.050 1.73
150 E TR3E157(1)010(2)0100 15.0 8 0.100 1.28
150 E TR3E157(1)010(2)0080 15.0 8 0.080 1.44
220 D TR3D227(1)010(2)0150 22.0 8 0.150 1.00
220 D TR3D227(1)010(2)0125 22.0 8 0.125 1.10
220 D TR3D227(1)010(2)0100 22.0 8 0.100 1.22
220 D TR3D227(1)010(3)0050 22.0 8 0.050 1.73
220 E TR3E227(1)010(2)0150 22.0 8 0.150 1.05
220 E TR3E227(1)010(2)0100 22.0 8 0.100 1.28
220 E TR3E227(1)010(3)0070 22.0 8 0.070 1.54
220 E TR3E227(1)010(3)0060 22.0 8 0.060 1.66
220 E TR3E227(1)010(3)0050 22.0 8 0.050 1.82
330 D TR3D337(1)010(2)0150 33.0 15 0.150 1.00
330 D TR3D337(1)010(2)0125 33.0 15 0.125 1.10
330 D TR3D337(1)010(2)0100 33.0 15 0.100 1.22
330 E TR3E337(1)010(2)0100 33.0 10 0.100 1.28
330 E TR3E337(1)010(3)0060 33.0 10 0.060 1.66
330 W TR3W337(1)010(3)0100 33.0 10 0.100 1.58
330 W TR3W337(1)010(3)0060 33.0 10 0.060 2.04
330 W TR3W337(1)010(3)0040 33.0 10 0.040 2.50
470 E TR3E477(1)010(2)0200 47.0 15 0.200 0.91
470 E TR3E477(1)010(2)0150 47.0 15 0.150 1.05
470 E TR3E477(1)010(2)0100 47.0 15 0.100 1.28
470 E TR3E477(1)010(3)0075 47.0 15 0.075 1.48
470 W TR3W477(1)010(3)0100 47.0 20 0.100 1.58
470 W TR3W477(1)010(3)0060 47.0 20 0.060 2.04
470 W TR3W477(1)010(3)0050 47.0 20 0.050 2.24
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
16 VDC AT +85 °C; 10 VDC AT +125 °C
1.0 A TR3A105(1)016(2)6200 0.5 4 6.200 0.11
2.2 A TR3A225(1)016(2)4000 0.5 6 4.000 0.14
2.2 A TR3A225(1)016(2)3500 0.5 6 3.500 0.15
2.2 A TR3A225(1)016(2)1800 0.5 6 1.800 0.20
3.3 A TR3A335(1)016(2)4000 0.5 6 4.000 0.14
3.3 A TR3A335(1)016(2)3500 0.5 6 3.500 0.15
3.3 B TR3B335(1)016(2)2500 0.5 6 2.500 0.18
4.7 A TR3A475(1)016(2)3000 0.8 6 3.000 0.16
4.7 A TR3A475(1)016(2)2500 0.8 6 2.500 0.17
4.7 A TR3A475(1)016(2)2000 0.8 6 2.000 0.19
4.7 A TR3A475(1)016(2)1500 0.8 6 1.500 0.22
4.7 B TR3B475(1)016(2)1500 0.8 6 1.500 0.24
4.7 B TR3B475(1)016(2)0800 0.8 6 0.800 0.33
6.8 A TR3A685(1)016(2)3000 1.1 6 3.000 0.16
6.8 A TR3A685(1)016(2)1500 1.1 6 1.500 0.22
6.8 B TR3B685(1)016(2)1200 1.1 6 1.200 0.27
6.8 B TR3B685(1)016(2)0600 1.1 6 0.600 0.38
10 A TR3A106(1)016(2)1700 1.6 6 1.700 0.21
10 B TR3B106(1)016(2)0800 1.6 6 0.800 0.33
10 B TR3B106(1)016(2)0500 1.6 6 0.500 0.41
10 C TR3C106(1)016(2)0600 1.6 6 0.600 0.43
10 C TR3C106(1)016(2)0500 1.6 6 0.500 0.47
10 C TR3C106(1)016(2)0450 1.6 6 0.450 0.49
15 B TR3B156(1)016(2)0800 2.4 6 0.800 0.33
15 B TR3B156(1)016(2)0500 2.4 6 0.500 0.41
15 C TR3C156(1)016(2)0400 2.4 6 0.400 0.52
22 B TR3B226(1)016(2)1000 3.5 6 1.000 0.29
22 B TR3B226(1)016(2)0700 3.5 6 0.700 0.35
22 B TR3B226(1)016(2)0600 3.5 6 0.600 0.38
22 B TR3B226(1)016(2)0400 3.5 6 0.400 0.46
22 C TR3C226(1)016(2)0375 3.5 6 0.375 0.54
22 C TR3C226(1)016(2)0350 3.5 6 0.350 0.56
22 D TR3D226(1)016(2)0250 3.5 6 0.250 0.77
33 B TR3B336(1)016(2)0700 5.3 6 0.700 0.35
33 B TR3B336(1)016(2)0500 5.3 6 0.500 0.41
33 B TR3B336(1)016(2)0350 5.3 6 0.350 0.49
33 C TR3C336(1)016(2)0300 5.3 6 0.300 0.61
33 C TR3C336(1)016(2)0225 5.3 6 0.225 0.70
33 D TR3D336(1)016(2)0250 5.3 6 0.250 0.77
33 D TR3D336(1)016(2)0225 5.3 4 0.225 0.82
33 D TR3D336(1)016(2)0150 5.3 6 0.150 1.00
47 C TR3C476(1)016(2)0500 7.5 6 0.500 0.47
47 C TR3C476(1)016(2)0350 7.5 6 0.350 0.56
47 C TR3C476(1)016(2)0300 7.5 6 0.300 0.61
47 D TR3D476(1)016(2)0200 7.5 6 0.200 0.87
47 D TR3D476(1)016(2)0150 7.5 6 0.150 1.00
47 D TR3D476(1)016(2)0120 7.5 6 0.120 1.12
47 D TR3D476(1)016(2)0100 7.5 6 0.100 1.22
47 D TR3D476(1)016(3)0080 7.5 6 0.080 1.37
47 D TR3D476(1)016(3)0070 7.5 6 0.070 1.46
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
16 VDC AT +85 °C; 10 VDC AT +125 °C
68 D TR3D686(1)016(2)0150 10.9 6 0.150 1.00
68 D TR3D686(1)016(2)0100 10.9 6 0.100 1.22
68 D TR3D686(1)016(3)0070 10.9 6 0.070 1.46
100 D TR3D107(1)016(2)0150 16.0 8 0.150 1.00
100 D TR3D107(1)016(2)0125 16.0 8 0.125 1.10
100 D TR3D107(1)016(2)0100 16.0 8 0.100 1.22
100 D TR3D107(1)016(3)0075 16.0 8 0.075 1.41
100 E TR3E107(1)016(2)0150 16.0 8 0.150 1.05
100 E TR3E107(1)016(2)0125 16.0 8 0.125 1.15
100 E TR3E107(1)016(2)0100 16.0 8 0.100 1.28
150 D TR3D157(1)016(2)0400 24.0 8 0.400 0.61
150 D TR3D157(1)016(2)0150 24.0 8 0.150 1.00
150 D TR3D157(1)016(2)0125 24.0 8 0.125 1.10
150 D TR3D157(1)016(2)0100 24.0 8 0.100 1.22
150 D TR3D157(1)016(2)0085 24.0 8 0.085 1.33
150 D TR3D157(1)016(3)0075 24.0 8 0.075 1.41
150 D TR3D157(1)016(3)0060 24.0 8 0.060 1.58
150 E TR3E157(1)016(2)0400 24.0 8 0.400 0.64
150 E TR3E157(1)016(2)0150 24.0 8 0.150 1.05
150 E TR3E157(1)016(2)0100 24.0 8 0.100 1.28
150 E TR3E157(1)016(3)0075 24.0 8 0.075 1.48
150 E TR3E157(1)016(3)0060 24.0 8 0.060 1.66
150 W TR3W157(1)016(3)0075 24.0 10 0.075 1.83
150 W TR3W157(1)016(3)0060 24.0 10 0.060 2.04
220 E TR3E227(1)016(2)0150 35.2 14 0.150 1.05
220 E TR3E227(1)016(2)0125 35.2 14 0.125 1.15
220 E TR3E227(1)016(2)0100 35.2 14 0.100 1.28
20 VDC AT +85 °C; 13 VDC AT +125 °C
1.0 A TR3A105(1)020(2)5500 0.5 4 5.500 0.12
1.0 A TR3A105(1)020(2)3000 0.5 4 3.000 0.16
1.5 A TR3A155(1)020(2)3000 0.5 6 3.000 0.16
2.2 A TR3A225(1)020(2)4000 0.5 6 4.000 0.14
2.2 A TR3A225(1)020(2)3000 0.5 6 3.000 0.16
3.3 A TR3A335(1)020(2)4000 0.7 6 4.000 0.14
3.3 B TR3B335(1)020(2)1300 0.7 6 1.300 0.26
4.7 A TR3A475(1)020(2)3500 0.9 6 3.500 0.15
4.7 A TR3A475(1)020(2)1800 0.9 6 1.800 0.20
4.7 B TR3B475(1)020(2)1000 0.9 6 1.000 0.29
4.7 B TR3B475(1)020(2)0750 0.9 6 0.750 0.34
6.8 A TR3A685(1)020(2)3200 1.4 6 3.200 0.15
6.8 A TR3A685(1)020(2)3000 1.4 6 3.000 0.16
6.8 A TR3A685(1)020(2)2600 1.4 6 2.600 0.17
6.8 B TR3B685(1)020(2)1000 1.4 6 1.000 0.29
6.8 B TR3B685(1)020(2)0600 1.4 6 0.600 0.38
10 B TR3B106(1)020(2)1000 2.0 6 1.000 0.29
10 B TR3B106(1)020(2)0500 2.0 6 0.500 0.41
10 C TR3C106(1)020(2)0700 2.0 6 0.700 0.40
10 C TR3C106(1)020(2)0500 2.0 6 0.500 0.47
10 C TR3C106(1)020(2)0475 2.0 6 0.475 0.48
10 C TR3C106(1)020(2)0450 2.0 6 0.450 0.49
10 C TR3C106(1)020(2)0400 2.0 6 0.400 0.52
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
20 VDC AT +85 °C; 13 VDC AT +125 °C
15 B TR3B156(1)020(2)1000 3.0 6 1.000 0.29
15 B TR3B156(1)020(2)0500 3.0 6 0.500 0.41
15 C TR3C156(1)020(2)0400 3.0 6 0.400 0.52
22 B TR3B226(1)020(2)0800 4.4 6 0.800 0.33
22 B TR3B226(1)020(2)0700 4.4 6 0.700 0.35
22 B TR3B226(1)020(2)0600 4.4 6 0.600 0.38
22 B TR3B226(1)020(2)0400 4.4 6 0.400 0.46
22 C TR3C226(1)020(2)0400 4.4 6 0.400 0.52
22 C TR3C226(1)020(2)0375 4.4 6 0.375 0.54
22 D TR3D226(1)020(2)0300 4.4 6 0.300 0.71
22 D TR3D226(1)020(2)0225 3.5 4 0.225 0.82
22 D TR3D226(1)020(2)0200 4.4 6 0.200 0.87
33 C TR3C336(1)020(2)0350 6.6 6 0.350 0.56
33 C TR3C336(1)020(2)0300 6.6 6 0.300 0.61
33 C TR3C336(1)020(2)0200 6.6 6 0.200 0.74
33 D TR3D336(1)020(2)0400 6.6 6 0.400 0.61
33 D TR3D336(1)020(2)0250 6.6 6 0.250 0.77
33 D TR3D336(1)020(2)0200 6.6 6 0.200 0.87
47 D TR3D476(1)020(2)0200 9.4 6 0.200 0.87
47 D TR3D476(1)020(2)0175 9.4 6 0.175 0.93
47 D TR3D476(1)020(2)0150 9.4 6 0.150 1.00
47 D TR3D476(1)020(3)0100 9.4 6 0.100 1.22
47 E TR3E476(1)020(2)0150 9.4 6 0.150 1.05
47 E TR3E476(1)020(3)0125 9.4 6 0.125 1.15
68 D TR3D686(1)020(2)0200 13.6 6 0.200 0.87
68 D TR3D686(1)020(2)0175 13.6 6 0.175 0.93
68 D TR3D686(1)020(2)0150 13.6 6 0.150 1.00
68 D TR3D686(1)020(2)0115 13.6 6 0.115 1.14
68 E TR3E686(1)020(2)0200 13.6 6 0.200 0.91
68 E TR3E686(1)020(2)0150 13.6 6 0.150 1.05
68 E TR3E686(1)020(2)0125 13.6 6 0.125 1.15
68 E TR3E686(1)020(2)0120 13.6 6 0.120 1.17
100 D TR3D107(1)020(2)0200 20.0 8 0.200 0.87
100 D TR3D107(1)020(2)0150 20.0 8 0.150 1.00
100 D TR3D107(1)020(2)0100 20.0 8 0.100 1.22
100 D TR3D107(1)020(3)0085 20.0 8 0.085 1.33
100 D TR3D107(1)020(3)0080 20.0 8 0.080 1.37
100 E TR3E107(1)020(2)0200 20.0 8 0.200 0.91
100 E TR3E107(1)020(2)0150 20.0 8 0.150 1.05
100 E TR3E107(1)020(2)0100 20.0 8 0.100 1.28
100 W TR3W107(1)020(3)0200 20.0 8 0.200 1.12
100 W TR3W107(1)020(3)0100 20.0 8 0.100 1.58
100 W TR3W107(1)020(3)0080 20.0 8 0.080 1.77
100 W TR3W107(1)020(3)0060 20.0 8 0.060 2.04
150 W TR3W157(1)020(3)0200 30.0 10 0.200 1.12
150 W TR3W157(1)020(3)0150 30.0 10 0.150 1.29
150 W TR3W157(1)020(3)0100 30.0 10 0.100 1.58
150 W TR3W157(1)020(3)0080 30.0 10 0.080 1.77
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
25 VDC AT +85 °C; 17 VDC AT +125 °C
0.47 A TR3A474(1)025(2)7000 0.5 4 7.000 0.10
0.68 A TR3A684(1)025(2)6000 0.5 4 6.000 0.11
1.0 A TR3A105(1)025(2)4000 0.5 4 4.000 0.14
1.5 A TR3A155(1)025(2)4000 0.5 6 4.000 0.14
1.5 A TR3A155(1)025(2)3000 0.5 6 3.000 0.16
1.5 B TR3B155(1)025(2)1800 0.5 6 1.800 0.22
2.2 A TR3A225(1)025(2)4000 0.6 6 4.000 0.14
2.2 B TR3B225(1)025(2)1700 0.6 8 1.700 0.22
2.2 B TR3B225(1)025(2)1500 0.6 6 1.500 0.24
2.2 B TR3B225(1)025(2)1200 0.6 6 1.200 0.27
2.2 B TR3B225(1)025(2)0900 0.6 6 0.900 0.31
3.3 A TR3A335(1)025(2)3500 0.8 6 3.500 0.15
3.3 A TR3A335(1)025(2)3000 0.8 6 3.000 0.16
3.3 B TR3B335(1)025(2)2000 0.8 6 2.000 0.21
3.3 B TR3B335(1)025(2)1500 0.8 6 1.500 0.24
3.3 B TR3B335(1)025(2)0750 0.8 6 0.750 0.34
4.7 A TR3A475(1)025(2)3500 1.2 6 3.500 0.15
4.7 A TR3A475(1)025(2)3000 1.2 6 3.000 0.16
4.7 B TR3B475(1)025(2)1500 1.2 6 1.500 0.24
4.7 B TR3B475(1)025(2)1000 1.2 6 1.000 0.29
4.7 B TR3B475(1)025(2)0900 1.2 6 9.000 0.10
4.7 B TR3B475(1)025(2)0700 1.2 6 0.700 0.35
4.7 C TR3C475(1)025(2)0600 1.2 6 0.600 0.43
4.7 C TR3C475(1)025(2)0525 1.2 6 0.525 0.46
6.8 B TR3B685(1)025(2)2000 1.7 6 2.000 0.21
6.8 B TR3B685(1)025(2)1500 1.7 6 1.500 0.24
6.8 B TR3B685(1)025(2)1200 1.7 6 1.200 0.27
6.8 B TR3B685(1)025(2)0700 1.7 6 0.700 0.35
6.8 B TR3B685(1)025(3)0500 1.7 6 0.500 0.41
6.8 B TR3B685(1)025(3)0400 1.7 6 0.400 0.46
6.8 C TR3C685(1)025(2)0600 1.7 6 0.600 0.43
6.8 C TR3C685(1)025(2)0500 1.7 6 0.500 0.47
10 B TR3B106(1)025(2)1300 2.5 6 1.300 0.26
10 B TR3B106(1)025(2)1100 2.5 6 1.100 0.28
10 B TR3B106(1)025(2)0900 2.5 6 0.900 0.31
10 B TR3B106(1)025(2)0450 2.5 6 0.450 0.43
10 C TR3C106(1)025(2)0600 2.5 6 0.600 0.43
10 C TR3C106(1)025(2)0500 2.5 6 0.500 0.47
10 C TR3C106(1)025(2)0450 2.5 6 0.450 0.49
10 C TR3C106(1)025(2)0300 2.5 6 0.300 0.61
10 D TR3D106(1)025(2)0400 2.5 6 0.400 0.61
10 D TR3D106(1)025(2)0300 2.5 6 0.300 0.71
15 B TR3B156(1)025(2)1000 3.8 6 1.000 0.29
15 B TR3B156(1)025(2)0800 3.8 6 0.800 0.33
15 B TR3B156(1)025(2)0600 3.8 6 0.600 0.38
15 C TR3C156(1)025(2)0900 3.8 6 0.900 0.35
15 C TR3C156(1)025(2)0425 3.8 6 0.425 0.51
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
25 VDC AT +85 °C; 17 VDC AT +125 °C
15 D TR3D156(1)025(2)0350 3.8 6 0.350 0.65
15 D TR3D156(1)025(2)0275 3.8 6 0.275 0.74
15 D TR3D156(1)025(2)0250 3.8 6 0.250 0.77
15 D TR3D156(1)025(2)0200 3.8 6 0.200 0.87
22 C TR3C226(1)025(2)1000 5.5 6 1.000 0.33
22 C TR3C226(1)025(2)0900 5.5 6 0.900 0.35
22 C TR3C226(1)025(2)0425 5.5 6 0.425 0.51
22 C TR3C226(1)025(2)0400 5.5 6 0.400 0.52
22 C TR3C226(1)025(2)0300 5.5 6 0.300 0.61
22 C TR3C226(1)025(2)0275 5.5 6 0.275 0.63
22 C TR3C226(1)025(2)0250 5.5 6 0.250 0.66
22 D TR3D226(1)025(2)0300 5.5 6 0.300 0.71
22 D TR3D226(1)025(2)0200 5.5 6 0.200 0.87
22 E TR3E226(1)025(2)0300 5.5 6 0.300 0.74
22 E TR3E226(1)025(2)0200 5.5 6 0.200 0.91
33 D TR3D336(1)025(2)0400 8.3 6 0.400 0.61
33 D TR3D336(1)025(2)0300 8.3 6 0.300 0.71
33 D TR3D336(1)025(2)0225 8.3 6 0.225 0.82
33 D TR3D336(1)025(2)0200 8.3 6 0.200 0.87
33 E TR3E336(1)025(2)0300 8.3 6 0.300 0.74
33 E TR3E336(1)025(2)0200 8.3 6 0.200 0.91
33 E TR3E336(1)025(2)0175 6.6 4 0.175 0.97
47 D TR3D476(1)025(2)0350 11.8 8 0.350 0.65
47 D TR3D476(1)025(2)0250 11.8 8 0.250 0.77
47 D TR3D476(1)025(2)0200 11.8 8 0.200 0.87
47 D TR3D476(1)025(2)0150 11.8 8 0.150 1.00
47 D TR3D476(1)025(3)0125 11.8 8 0.125 1.10
47 D TR3D476(1)025(3)0100 11.8 8 0.100 1.22
47 E TR3E476(1)025(2)0300 11.8 6 0.300 0.74
47 E TR3E476(1)025(2)0200 11.8 6 0.200 0.91
47 E TR3E476(1)025(2)0150 11.8 8 0.150 1.05
47 E TR3E476(1)025(3)0125 11.8 8 0.125 1.15
47 E TR3E476(1)025(3)0100 11.8 8 0.100 1.28
68 E TR3E686(1)025(2)0250 17.0 8 0.250 0.81
68 E TR3E686(1)025(3)0125 17.0 8 0.125 1.15
100 W TR3W107(1)025(3)0200 25.0 15 0.200 1.12
100 W TR3W107(1)025(3)0150 25.0 15 0.150 1.29
100 W TR3W107(1)025(3)0100 25.0 15 0.100 1.58
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
35 VDC AT +85 °C; 23 VDC AT +125 °C
0.22 A TR3A224(1)035(2)6000 0.5 4 6.000 0.11
0.33 A TR3A334(1)035(2)6000 0.5 4 6.000 0.11
0.47 A TR3A474(1)035(2)4000 0.5 4 4.000 0.14
0.47 B TR3B474(1)035(2)4000 0.5 6 4.000 0.15
0.68 A TR3A684(1)035(2)6000 0.5 4 6.000 0.11
0.68 A TR3A684(1)035(2)4000 0.5 4 4.000 0.14
1.0 A TR3A105(1)035(2)6000 0.5 4 6.000 0.11
1.0 A TR3A105(1)035(2)4000 0.5 4 4.000 0.14
1.0 A TR3A105(1)035(2)3000 0.5 4 3.000 0.16
1.0 B TR3B105(1)035(2)2000 0.5 4 2.000 0.21
1.5 B TR3B155(1)035(2)3000 0.5 6 3.000 0.17
1.5 B TR3B155(1)035(2)2000 0.5 6 2.000 0.21
1.5 C TR3C155(1)035(2)2500 0.5 6 2.500 0.21
1.5 C TR3C155(1)035(2)0900 0.5 6 0.900 0.35
2.2 B TR3B225(1)035(2)2500 0.8 6 2.500 0.18
2.2 B TR3B225(1)035(2)2000 0.8 6 2.000 0.21
2.2 B TR3B225(1)035(2)1500 0.8 6 1.500 0.24
2.2 C TR3C225(1)035(2)1500 0.8 6 1.500 0.27
2.2 C TR3C225(1)035(2)0900 0.8 6 0.900 0.35
3.3 B TR3B335(1)035(2)1500 1.2 6 1.500 0.24
3.3 B TR3B335(1)035(2)1000 1.2 6 1.000 0.29
3.3 C TR3C335(1)035(2)0800 1.2 6 0.800 0.37
3.3 C TR3C335(1)035(2)0700 1.2 6 0.700 0.40
3.3 C TR3C335(1)035(2)0600 1.2 6 0.600 0.43
4.7 B TR3B475(1)035(2)1500 1.6 6 1.500 0.24
4.7 B TR3B475(1)035(2)1000 1.6 6 1.000 0.29
4.7 B TR3B475(1)035(2)0700 1.6 6 0.700 0.35
4.7 C TR3C475(1)035(2)0700 1.6 6 0.700 0.40
4.7 C TR3C475(1)035(2)0600 1.6 6 0.600 0.43
4.7 C TR3C475(1)035(2)0500 1.6 6 0.500 0.47
4.7 D TR3D475(1)035(2)0700 1.6 6 0.700 0.46
6.8 C TR3C685(1)035(2)0900 2.4 6 0.900 0.35
6.8 C TR3C685(1)035(2)0475 2.4 6 0.475 0.48
6.8 D TR3D685(1)035(2)0500 2.4 6 0.500 0.55
6.8 D TR3D685(1)035(2)0400 2.4 6 0.400 0.61
6.8 D TR3D685(1)035(2)0300 2.4 6 0.300 0.71
6.8 E TR3E685(1)035(2)0300 2.4 4 0.300 0.74
10 C TR3C106(1)035(2)1200 3.5 6 1.200 0.30
10 C TR3C106(1)035(2)0450 3.5 6 0.450 0.49
10 D TR3D106(1)035(2)0400 3.5 6 0.400 0.61
10 D TR3D106(1)035(2)0300 3.5 6 0.300 0.71
10 D TR3D106(1)035(2)0260 3.5 6 0.260 0.76
10 D TR3D106(1)035(2)0250 3.5 6 0.250 0.77
10 D TR3D106(1)035(2)0200 3.5 6 0.200 0.87
10 D TR3D106(1)035(3)0135 3.5 6 0.135 1.05
10 D TR3D106(1)035(3)0125 3.5 6 0.125 1.10
10 E TR3E106(1)035(2)0250 3.5 6 0.250 0.81
10 E TR3E106(1)035(2)0200 3.5 6 0.200 0.91
15 C TR3C156(1)035(2)0600 5.3 6 0.600 0.43
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
35 VDC AT +85 °C; 23 VDC AT +125 °C
15 C TR3C156(1)035(2)0400 5.3 6 0.400 0.52
15 D TR3D156(1)035(2)0350 5.3 6 0.350 0.65
15 D TR3D156(1)035(2)0300 5.3 6 0.300 0.71
15 D TR3D156(1)035(2)0260 5.3 6 0.260 0.76
15 D TR3D156(1)035(2)0225 5.3 6 0.225 0.82
15 D TR3D156(1)035(2)0200 5.3 6 0.200 0.87
15 D TR3D156(1)035(2)0150 5.3 6 0.150 1.00
15 E TR3E156(1)035(2)0300 5.3 6 0.300 0.74
15 E TR3E156(1)035(2)0225 5.3 6 0.225 0.86
15 E TR3E156(1)035(2)0200 5.3 6 0.200 0.91
15 E TR3E156(1)035(2)0150 5.3 6 0.150 1.05
22 D TR3D226(1)035(2)0400 7.7 6 0.400 0.61
22 D TR3D226(1)035(2)0300 7.7 6 0.300 0.71
22 D TR3D226(1)035(2)0275 7.7 6 0.275 0.74
22 D TR3D226(1)035(2)0250 7.7 6 0.250 0.77
22 D TR3D226(1)035(2)0200 7.7 6 0.200 0.87
22 E TR3E226(1)035(2)0300 7.7 6 0.300 0.74
22 E TR3E226(1)035(2)0275 7.7 6 0.275 0.77
22 E TR3E226(1)035(2)0260 7.7 6 0.260 0.80
22 E TR3E226(1)035(2)0200 7.7 6 0.200 0.91
33 D TR3D336(1)035(2)0400 11.6 6 0.400 0.61
33 D TR3D336(1)035(3)0250 11.6 6 0.250 0.77
33 E TR3E336(1)035(2)0400 11.6 6 0.400 0.64
33 E TR3E336(1)035(3)0250 11.6 6 0.250 0.81
47 E TR3E476(1)035(2)0400 20.0 10 0.400 0.64
47 E TR3E476(1)035(3)0200 20.0 10 0.200 0.91
50 VDC AT +85 °C; 33 VDC AT +125 °C
0.15 A TR3A154(1)050(2)10R0 0.5 4 10.000 0.09
0.22 A TR3A224(1)050(2)10R0 0.5 4 10.000 0.09
0.33 A TR3A334(1)050(2)7000 0.5 4 7.000 0.10
0.47 B TR3B474(1)050(2)6000 0.5 4 6.000 0.12
0.47 C TR3C474(1)050(2)2300 0.5 4 2.300 0.22
1.0 B TR3B105(1)050(2)4000 0.5 4 4.000 0.15
1.0 B TR3B105(1)050(2)2000 0.5 4 2.000 0.21
1.0 C TR3C105(1)050(2)1600 0.5 4 1.600 0.26
1.5 B TR3B155(1)050(2)2000 0.8 6 2.000 0.21
1.5 C TR3C155(1)050(2)1500 0.8 6 1.500 0.27
2.2 B TR3B225(1)050(2)2000 1.1 6 2.000 0.21
2.2 C TR3C225(1)050(2)1500 1.1 6 1.500 0.27
2.2 D TR3D225(1)050(2)0800 1.1 6 0.800 0.43
3.3 C TR3C335(1)050(2)1500 1.7 6 1.500 0.27
3.3 D TR3D335(1)050(2)0800 1.7 6 0.800 0.43
4.7 C TR3C475(1)050(2)1000 2.4 6 1.000 0.33
4.7 C TR3C475(1)050(2)0700 2.4 6 0.700 0.40
4.7 C TR3C475(1)050(2)0500 2.4 6 0.500 0.47
4.7 D TR3D475(1)050(2)0700 2.4 6 0.700 0.46
4.7 D TR3D475(1)050(2)0600 2.4 6 0.600 0.50
4.7 D TR3D475(1)050(2)0500 2.4 6 0.500 0.55
4.7 D TR3D475(1)050(2)0300 2.4 6 0.300 0.71
4.7 E TR3E475(1)050(2)0600 2.4 4 0.600 0.52
4.7 E TR3E475(1)050(2)0300 2.4 4 0.300 0.74
Note

TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
(μA) (%) (Ω) (A)
50 VDC AT +85 °C; 33 VDC AT +125 °C
6.8 D TR3D685(1)050(2)0700 3.4 6 0.700 0.46
6.8 D TR3D685(1)050(2)0600 3.4 6 0.600 0.50
6.8 D TR3D685(1)050(2)0500 3.4 6 0.500 0.55
6.8 D TR3D685(1)050(2)0300 3.4 6 0.300 0.71
6.8 E TR3E685(1)050(2)0550 3.4 6 0.550 0.55
6.8 E TR3E685(1)050(2)0500 3.4 6 0.500 0.57
10 D TR3D106(1)050(2)0700 5.0 6 0.700 0.46
10 D TR3D106(1)050(2)0550 5.0 6 0.550 0.52
10 D TR3D106(1)050(2)0450 5.0 6 0.450 0.58
10 E TR3E106(1)050(2)0700 5.0 6 0.700 0.49
10 E TR3E106(1)050(2)0550 5.0 6 0.550 0.55
10 E TR3E106(1)050(2)0500 5.0 6 0.500 0.57
10 E TR3E106(1)050(2)0400 5.0 6 0.400 0.64
10 E TR3E106(1)050(2)0300 5.0 6 0.300 0.74
15 E TR3E156(1)050(2)0400 7.5 6 0.400 0.64
15 E TR3E156(1)050(3)0300 7.5 6 0.300 0.74
15 E TR3E156M050(2)0250 7.5 6 0.250 0.81
15 E TR3E156M050(3)0200 7.5 6 0.200 0.91
63 VDC AT +85 °C; 40 VDC AT +125 °C
3.3 D TR3D335(1)063(2)1000 2.1 6 1.000 0.39
3.3 D TR3D335(1)063(2)0800 2.1 6 0.800 0.43
4.7 D TR3D475(1)063(2)0700 3.0 6 0.700 0.46
4.7 D TR3D475(1)063(2)0500 3.0 6 0.500 0.55
10 E TR3E106(1)063(2)0600 6.3 6 0.600 0.52
75 VDC AT +85 °C; 50 VDC AT +125 °C
1.0 D TR3D105(1)075(2)3000 0.8 6 3.000 0.22
1.0 D TR3D105(1)075(2)1500 0.8 6 1.500 0.32
1.5 B TR3B155(1)075(2)2000 1.1 6 2.000 0.21
1.5 C TR3C155(1)075(2)2000 1.1 6 2.000 0.23
1.5 D TR3D155(1)075(2)2000 1.1 6 2.000 0.27
1.5 D TR3D155(1)075(2)1000 1.1 6 1.000 0.27
2.2 D TR3D225(1)075(2)1500 1.7 6 1.500 0.32
3.3 D TR3D335(1)075(2)1200 2.5 6 1.200 0.35
3.3 D TR3D335(1)075(2)1000 2.5 6 1.000 0.39
3.3 D TR3D335(1)075(2)0800 2.5 6 0.800 0.43
4.7 E TR3E475(1)075(2)1500 3.5 10 1.500 0.26
Note

TR3
www.vishay.com
Vishay Sprague
TYPICAL CURVES AT +25 °C, IMPEDANCE AND ESR VS. FREQUENCY

“D” Case “D” Case
1 10000 1 10000
ESR ESR
Impedance Impedance
Impedance / ESR (Ω)
Impedance / ESR (Ω)

1000 1000
2nd line
2nd line
68 μF, 20 VDC
1st line
1st line
2nd line
2nd line
0.1 0.1 220 μF, 10 VDC
100 100
470 μF, 4 VDC 330 μF, 6.3 VDC
0.01 10 0.01 10
0.1 1 10 100 1000 0.1 1 10 100 1000
Frequency (kHz) Frequency (kHz)
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
A 0.075
B 0.085
C 0.110
D 0.150
E 0.165
W 0.250
STANDARD PACKAGING QUANTITY

UNITS PER REEL
CASE CODE
7" REEL 13" REEL
A 2000 9000
B 2000 8000
C 500 3000
D 500 2500
E 400 1500
W 500 2000
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
Pad Dimensions www.vishay.com/doc?40074
Packaging Dimensions
Moisture Sensitivity (MSL) www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110

Molded Guide
www.vishay.com
Vishay Sprague
Guide for Molded Tantalum Capacitors
INTRODUCTION Rating for rating, tantalum capacitors tend to have as much

Tantalum electrolytic capacitors are the preferred choice in as three times better capacitance / volume efficiency than
applications where volumetric efficiency, stable electrical aluminum electrolytic capacitors. An approximation of the
parameters, high reliability, and long service life are primary capacitance / volume efficiency of other types of capacitors
considerations. The stability and resistance to elevated may be inferred from the following table, which shows the
temperatures of the tantalum / tantalum oxide / manganese dielectric constant ranges of the various materials used in
dioxide system make solid tantalum capacitors an each type. Note that tantalum pentoxide has a dielectric
appropriate choice for today's surface-mount assembly constant of 26, some three times greater than that of
technology. aluminum oxide. This, in addition to the fact that extremely
thin films can be deposited during the electrolytic process
Vishay Sprague has been a pioneer and leader in this field, mentioned earlier, makes the tantalum capacitor extremely
producing a large variety of tantalum capacitor types for efficient with respect to the number of microfarads available
consumer, industrial, automotive, military, and aerospace per unit volume. The capacitance of any capacitor is
electronic applications. determined by the surface area of the two conducting
Tantalum is not found in its pure state. Rather, it is plates, the distance between the plates, and the dielectric
commonly found in a number of oxide minerals, often in constant of the insulating material between the plates.
combination with Columbium ore. This combination is
known as “tantalite” when its contents are more than COMPARISON OF CAPACITOR
one-half tantalum. Important sources of tantalite include DIELECTRIC CONSTANTS
Australia, Brazil, Canada, China, and several African
countries. Synthetic tantalite concentrates produced from e
DIELECTRIC
tin slags in Thailand, Malaysia, and Brazil are also a DIELECTRIC CONSTANT
significant raw material for tantalum production. Air or vacuum 1.0
Electronic applications, and particularly capacitors, Paper 2.0 to 6.0
consume the largest share of world tantalum production. Plastic 2.1 to 6.0
Other important applications for tantalum include cutting Mineral oil 2.2 to 2.3
tools (tantalum carbide), high temperature super alloys, Silicone oil 2.7 to 2.8
chemical processing equipment, medical implants, and
Quartz 3.8 to 4.4
military ordnance.
Glass 4.8 to 8.0
Vishay Sprague is a major user of tantalum materials in the
form of powder and wire for capacitor elements and rod and Porcelain 5.1 to 5.9
sheet for high temperature vacuum processing. Mica 5.4 to 8.7
Aluminum oxide 8.4
THE BASICS OF TANTALUM CAPACITORS Tantalum pentoxide 26
Most metals form crystalline oxides which are Ceramic 12 to 400K
non-protecting, such as rust on iron or black oxide on
copper. A few metals form dense, stable, tightly adhering, In the tantalum electrolytic capacitor, the distance between
electrically insulating oxides. These are the so-called the plates is very small since it is only the thickness of the
“valve”metals and include titanium, zirconium, niobium, tantalum pentoxide film. As the dielectric constant of the
tantalum, hafnium, and aluminum. Only a few of these tantalum pentoxide is high, the capacitance of a tantalum
permit the accurate control of oxide thickness by capacitor is high if the area of the plates is large:
electrochemical means. Of these, the most valuable for the
electronics industry are aluminum and tantalum. C = eA
-------
Capacitors are basic to all kinds of electrical equipment, t
from radios and television sets to missile controls and where
automobile ignitions. Their function is to store an electrical
charge for later use. C = capacitance
Capacitors consist of two conducting surfaces, usually e = dielectric constant
metal plates, whose function is to conduct electricity. They
are separated by an insulating material or dielectric. The A = surface area of the dielectric
dielectric used in all tantalum electrolytic capacitors is t = thickness of the dielectric
tantalum pentoxide.
Tantalum capacitors contain either liquid or solid
Tantalum pentoxide compound possesses high-dielectric electrolytes. In solid electrolyte capacitors, a dry material
strength and a high-dielectric constant. As capacitors are (manganese dioxide) forms the cathode plate. A tantalum
being manufactured, a film of tantalum pentoxide is applied
lead is embedded in or welded to the pellet, which is in turn
to their electrodes by means of an electrolytic process. The
connected to a termination or lead wire. The drawings show
film is applied in various thicknesses and at various voltages
the construction details of the surface-mount types of
and although transparent to begin with, it takes on different
colors as light refracts through it. This coloring occurs on the tantalum capacitors shown in this catalog.
tantalum electrodes of all types of tantalum capacitors.
Revision: 08-Mar-2023 1 Document Number: 40074

Molded Guide
www.vishay.com
Vishay Sprague
SOLID ELECTROLYTE TANTALUM CAPACITORS TANTALUM CAPACITORS FOR ALL DESIGN
Solid electrolyte capacitors contain manganese dioxide, CONSIDERATIONS
which is formed on the tantalum pentoxide dielectric layer Solid electrolyte designs are the least expensive for a given
by impregnating the pellet with a solution of manganous rating and are used in many applications where their very
nitrate. The pellet is then heated in an oven, and the small size for a given unit of capacitance is of importance.
manganous nitrate is converted to manganese dioxide. They will typically withstand up to about 10 % of the rated
The pellet is next coated with graphite, followed by a layer DC working voltage in a reverse direction. Also important
of metallic silver, which provides a conductive surface are their good low temperature performance characteristics
between the pellet and the leadframe. and freedom from corrosive electrolytes.
Molded Chip tantalum capacitor encases the element in Vishay Sprague patented the original solid electrolyte
plastic resins, such as epoxy materials. The molding capacitors and was the first to market them in 1956. Vishay
compound has been selected to meet the requirements of Sprague has the broadest line of tantalum capacitors and
UL 94 V-0 and outgassing requirements of ASTM E-595. has continued its position of leadership in this field. Data
After assembly, the capacitors are tested and inspected to sheets covering the various types and styles of Vishay
assure long life and reliability. It offers excellent reliability Sprague capacitors for consumer and entertainment
and high stability for consumer and commercial electronics electronics, industry, and military applications are available
with the added feature of low cost where detailed performance characteristics must be
specified.
Surface-mount designs of “solid tantalum” capacitors use
lead frames or lead frameless designs as shown in the
accompanying drawings.
MOLDED CHIP CAPACITOR
Epoxy
Silver Encapsulation
Adhesive
Anode
Polarity Bar
MnO2/Carbon/
Silver Coating
Solderable Leadframe Solderable Anode
Cathode Sintered Termination
Termination Tantalum

Molded Guide
www.vishay.com
Vishay Sprague
COMMERCIAL PRODUCTS
SOLID TANTALUM CAPACITORS - MOLDED CASE
793DX-CTC3-
SERIES 293D 593D TR3 TP3 TL3
CTC4
PRODUCT IMAGE
TYPE Surface-mount TANTAMOUNT™, molded case

Standard High performance,
FEATURES CECC approved Low ESR Low ESR Very low DCL
industrial grade automotive grade
TEMPERATURE
-55 °C to +125 °C
RANGE
CAPACITANCE 0.1 μF to 470
0.1 μF to 1000 μF 0.1 μF to 100 μF 1 μF to 470 μF 0.47 μF to 1000 μF 0.1 μF to 470 μF
RANGE μF
VOLTAGE RANGE 4 V to 75 V 4 V to 50 V 4 V to 50 V 4 V to 75 V 4 V to 50 V 4 V to 50 V
CAPACITANCE
± 10 %, ± 20 %
TOLERANCE
0.005 CV or
LEAKAGE 0.25 μA,
0.01 CV or 0.5 μA, whichever is greater
CURRENT whichever is
greater
DISSIPATION
4 % to 30 % 4 % to 6 % 4 % to 15 % 4 % to 30 % 4 % to 15 % 4 % to 15 %
FACTOR
CASE CODES A, B, C, D, E A, B, C, D A, B, C, D, E A, B, C, D, E, W A, B, C, D, E A, B, C, D, E
TERMINATION 100 % matte tin standard, tin / lead available

SERIES TX3 TH3 TH4 TH5
PRODUCT IMAGE
TYPE Surface-mount TANTAMOUNT™, molded case

High temperature +150 °C, High temperature +175 °C, Very high temperature
FEATURES E-detonators
automotive grade automotive grade +200 °C
TEMPERATURE
-55 °C to +125 °C -55 °C to +150 °C -55 °C to +175 °C -55 °C to +200 °C
RANGE
CAPACITANCE
10 μF to 100 μF 0.33 μF to 220 μF 10 μF to 100 μF 4.7 μF to 100 μF
RANGE
VOLTAGE RANGE 16 V to 25 V 6.3 V to 50 V 6.3 V to 35 V 5 V to 24 V
CAPACITANCE
± 10 %, ± 20 %
TOLERANCE
LEAKAGE
0.005 CV 0.01 CV or 0.5 μA, whichever is greater
CURRENT
DISSIPATION
6 % to 20 % 4 % to 8 % 4.5 % to 8 % 6 % to 10 %
FACTOR
CASE CODES B, C A, B, C, D, E B, C, D, E D, E
100 % matte tin standard,
TERMINATION 100 % matte tin tin / lead and gold plated 100 % matte tin Gold plated
available

Molded Guide
www.vishay.com
Vishay Sprague
HIGH RELIABILITY PRODUCTS
SERIES TM3 T83 CWR11 95158
PRODUCT
IMAGE
TANTAMOUNT™,
TANTAMOUNT™, TANTAMOUNT™, molded case,
TYPE molded case,
molded case, hi-rel. DLA approved
hi-rel. COTS
High reliability, High reliability,

FEATURES MIL-PRF-55365/8 qualified Low ESR
for medical Instruments standard and low ESR
TEMPERATURE
-55 °C to +125 °C
RANGE
CAPACITANCE
1 μF to 220 μF 0.1 μF to 470 μF 0.1 μF to 100 μF 4.7 μF to 220 μF
RANGE
VOLTAGE RANGE 4 V to 20 V 4 V to 63 V 4 V to 50 V
CAPACITANCE
± 10 %, ± 20 % ± 5 %, ± 10 %, ± 20 % ± 10 %, ± 20 %
TOLERANCE
LEAKAGE 0.005 CV or 0.25 μA,

0.01 CV or 0.5 μA, whichever is greater
CURRENT whichever is greater
DISSIPATION
4 % to 8 % 4 % to 15 % 4 % to 6 % 4 % to 12 %
FACTOR
CASE CODES A, B, C, D, E A, B, C, D, E A, B, C, D C, D, E
100 % matte tin;

100 % matte tin; Tin / lead; Tin / lead solder plated;
TERMINATION tin / lead;
tin / lead tin / lead solder fused gold plated
tin / lead solder fused

Molded Guide
www.vishay.com
Vishay Sprague
PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]

0.157 ± 0.004
[4.0 ± 0.10] 10 pitches cumulative
Tape thickness
tolerance on tape
Deformation ± 0.008 [0.200]
0.059 + 0.004 - 0.0
0.014 between
[1.5 + 0.10 - 0.0]
[0.35] embossments 0.079 ± 0.002 0.069 ± 0.004
MAX. Embossment
[2.0 ± 0.05] [1.75 ± 0.10]
Top
cover
A0 20°
tape 0.030 [0.75]
F W
B1 MAX. MIN. (Note 3) Maxim um
K0
(Note 6) component
B0
Top 0.030 [0.75] rotation
cover MIN. (Note 4) (Side or front sectional view)
tape
0.004 [0.1] Center lines P1
For tape feeder MAX. of cavity D1 MIN. for components
reference only 0.079 x 0.047 [2.0 x 1.2] and larger .
including draft. USER DIRECTION OF FEED
Maximum (Note 5)
Concentric around B0 cavity size
(Note 5) (Note 1)
Cathode (-)
Anode (+)
Direction of Feed
20° maximum 3.937 [100.0] Tape and Reel Specifications: all case sizes are available
component rotation 0.039 [1.0] on plastic embossed tape per EIA-481. Standard reel
MAX.
Typical diameter is 7" [178 mm], 13" [330 mm] reels are available and
component
Tape
recommended as the most cost effective packaging method.
B0 cavity
center line 0.039 [1.0] The most efficient packaging quantities are full reel
MAX.
0.9843 [250.0]
increments on a given reel diameter. The quantities shown
Typical allow for the sealed empty pockets required to be in
component Camber
A0 center line (top view) conformance with EIA-481. Reel size and packaging
Allowable camber to be 0.039/3.937 [1/100] orientation must be specified in the Vishay Sprague part
(Top view) non-cumulative over 9.843 [250.0] number.
Notes
• Metric dimensions will govern. Dimensions in inches are rounded and for reference only
(1) A , B , K , are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
0 0 0
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°
(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum
(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less
(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less
(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location shall be applied independent of each other
(6) B dimension is a reference dimension tape feeder clearance only
1
CASE TAPE B1 D1 K0
F P1 W
CODE SIZE (MAX.) (MIN.) (MAX.)
MOLDED CHIP CAPACITORS; ALL TYPES
A 0.165 0.039 0.138 ± 0.002 0.094 0.157 ± 0.004 0.315 ± 0.012
8 mm
B [4.2] [1.0] [3.5 ± 0.05] [2.4] [4.0 ± 1.0] [8.0 ± 0.30]
C
D 0.32 0.059 0.217 ± 0.00 0.177 0.315 ± 0.004 0.472 ± 0.012
12 mm
E [8.2] [1.5] [5.5 ± 0.05] [4.5] [8.0 ± 1.0] [12.0 ± 0.30]
W

Molded Guide
www.vishay.com
Vishay Sprague
RECOMMENDED REFLOW PROFILES

Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles.
Tp
TC - 5 °C
Max. ramp-up rate = 3 °C/s tp
Max. ramp-down rate = 6 °C/s
TEMPERATURE (°C)
TL
tL
Ts max. Preheat area
Ts min.
ts
25
Time 25 °C to peak
TIME (s)
PROFILE FEATURE SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY

Preheat / soak
Temperature min. (Ts min.) 100 °C 150 °C
Temperature max. (Ts max.) 150 °C 200 °C
Time (ts) from (Ts min. to Ts max.) 60 s to 120 s 60 s to 120 s
Ramp-up
Ramp-up rate (TL to Tp) 3 °C/s max. 3 °C/s max.
Liquidus temperature (TL) 183 °C 217 °C
Time (tL) maintained above TL 60 s to 150 s 60 s to 150 s
Peak package body temperature (Tp) Depends on case size - see table below
Time (tp) within 5 °C of the specified
classification temperature (TC) 20 s 30 s
Time 25 °C to peak temperature 6 min max. 8 min max.
Ramp-down
Ramp-down rate (Tp to TL) 6 °C/s max. 6 °C/s max.
PEAK PACKAGE BODY TEMPERATURE (Tp)

PEAK PACKAGE BODY TEMPERATURE (Tp)
CASE CODE
SnPb EUTECTIC PROCESS LEAD (Pb)-FREE PROCESS
A, B, C 235 °C 260 °C
D, E, W 220 °C 250 °C
PAD DIMENSIONS in inches [millimeters]

D
B C
A B C D
CASE CODE
(MIN.) (NOM.) (NOM.) (NOM.)
MOLDED CHIP CAPACITORS, ALL TYPES
A 0.071 [1.80] 0.067 [1.70] 0.053 [1.35] 0.187 [4.75]
B 0.118 [3.00] 0.071 [1.80] 0.065 [1.65] 0.207 [5.25]
C 0.118 [3.00] 0.094 [2.40] 0.118 [3.00] 0.307 [7.80]
D 0.157 [4.00] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]
E 0.157 [4.00] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]
W 0.185 [4.70] 0.098 [2.50] 0.150 [3.80] 0.346 [8.80]

Molded Guide
www.vishay.com
Vishay Sprague
GUIDE TO APPLICATION
1. AC Ripple Current: the maximum allowable ripple be established when calculating permissible
current shall be determined from the formula: operating levels. (Power dissipation calculated using
+25 °C temperature rise).
P
I RM S = ------------ 6. Printed Circuit Board Materials: molded capacitors
R ESR are compatible with commonly used printed circuit
board materials (alumina substrates, FR4, FR5, G10,
where, PTFE-fluorocarbon and porcelanized steel).
P= power dissipation in W at +25 °C as given in
the tables in the product datasheets (Power 7. Attachment:
Dissipation).
7.1 Solder Paste: the recommended thickness of the
RESR = the capacitor equivalent series resistance at solder paste after application is 0.007" ± 0.001"
the specified frequency [0.178 mm ± 0.025 mm]. Care should be exercised in
selecting the solder paste. The metal purity should be
2. AC Ripple Voltage: the maximum allowable ripple as high as practical. The flux (in the paste) must be
voltage shall be determined from the formula: active enough to remove the oxides formed on the
V RMS = I RM S x Z metallization prior to the exposure to soldering heat. In
practice this can be aided by extending the solder
or, from the formula: preheat time at temperatures below the liquidous
state of the solder.
P
V R MS = Z ------------
R ESR 7.2 Soldering: capacitors can be attached by
conventional soldering techniques; vapor phase,
where, convection reflow, infrared reflow, wave soldering,
and hot plate methods. The soldering profile charts
P= power dissipation in W at +25 °C as given in show recommended time / temperature conditions
the tables in the product datasheets (Power for soldering. Preheating is recommended. The
Dissipation). recommended maximum ramp rate is 3 °C per
RESR = the capacitor equivalent series resistance at second. Attachment with a soldering iron is not
the specified frequency recommended due to the difficulty of controlling
temperature and time at temperature. The soldering
Z= the capacitor impedance at the specified iron must never come in contact with the capacitor.
frequency For details see www.vishay.com/doc?40214.
2.1 The sum of the peak AC voltage plus the applied DC
voltage shall not exceed the DC voltage rating of the 7.2.1 Backward and Forward Compatibility: capacitors
capacitor. with SnPb or 100 % tin termination finishes can be
soldered using SnPb or lead (Pb)-free soldering
2.2 The sum of the negative peak AC voltage plus the processes.
applied DC voltage shall not allow a voltage reversal
exceeding 10 % of the DC working voltage at 8. Cleaning (Flux Removal) After Soldering: molded
+25 °C. capacitors are compatible with all commonly used
solvents such as TES, TMS, Prelete, Chlorethane,
3. Reverse Voltage: solid tantalum capacitors are not Terpene and aqueous cleaning media. However,
intended for use with reverse voltage applied. CFC / ODS products are not used in the production
However, they have been shown to be capable of of these devices and are not recommended.
withstanding momentary reverse voltage peaks of up Solvents containing methylene chloride or other
to 10 % of the DC rating at 25 °C and 5 % of the DC epoxy solvents should be avoided since these will
rating at +85 °C. attack the epoxy encapsulation material.
4. Temperature Derating: if these capacitors are to be 8.1 When using ultrasonic cleaning, the board may
operated at temperatures above +25 °C, the resonate if the output power is too high. This
permissible RMS ripple current shall be calculated vibration can cause cracking or a decrease in the
using the derating factors as shown: adherence of the termination. DO NOT EXCEED 9W/l
at 40 kHz for 2 min.
TEMPERATURE (°C) DERATING FACTOR
+25 1.0 9. Recommended Mounting Pad Geometries: proper
+85 0.9 mounting pad geometries are essential for
+125 0.4 successful solder connections. These dimensions
+150 (1) 0.3 are highly process sensitive and should be designed
to minimize component rework due to unacceptable
+175 (1) 0.2
solder joints. The dimensional configurations shown
+200 (1) 0.1 are the recommended pad geometries for both wave
Note and reflow soldering techniques. These dimensions
(1) Applicable for dedicated high temperature product series
are intended to be a starting point for circuit board
designers and may be fine tuned if necessary based
upon the peculiarities of the soldering process and /
5. Power Dissipation: power dissipation will be or circuit board design.
affected by the heat sinking capability of the
mounting surface. Non-sinusoidal ripple current may
produce heating effects which differ from those
shown. It is important that the equivalent IRMS value

Typical Performance Characteristics
www.vishay.com
Vishay Sprague
Molded Chip Tantalum Capacitors
CAPACITOR ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM PERFORMANCE CHARACTERISTICS
Category temperature range -55 °C to +85 °C (to +125 °C with voltage derating)
Capacitance tolerance ± 20 %, ± 10 %. Tested via bridge method, at +25 °C, 120 Hz
Dissipation factor Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz
ESR Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz
Leakage current After application of rated voltage applied to capacitors for 5 min using a steady source of power with
1 kΩ resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or
0.5 μA, whichever is greater. Note that the leakage current varies with temperature and applied voltage.
See graph below for the appropriate adjustment factor.
Capacitance change by +20 % max. (at +125 °C)
temperature +10 % max. (at +85 °C)
-10 % max. (at -55 °C)
Reverse voltage Capacitors are capable of withstanding peak voltages in the reverse direction equal to:
10 % of the DC rating at +25 °C
5 % of the DC rating at +85 °C
Vishay does not recommend intentional or repetitive application of reverse voltage
Ripple current For maximum ripple current values (at 25 °C) refer to relevant datasheet. If capacitors are to be used at
temperatures above +25 °C, the permissible RMS ripple current (or voltage) shall be calculated using the
derating factors:
1.0 at +25 °C; 0.9 at +85 °C; 0.4 at +125 °C
Maximum operating and surge +85 °C +125 °C
voltages vs. temperature
RATED VOLTAGE SURGE VOLTAGE CATEGORY VOLTAGE SURGE VOLTAGE
(V) (V) (V) (V)
4 5.2 2.7 3.4
6.3 8 4 5
10 13 7 8
16 20 10 12
20 26 13 16
25 32 17 20
35 (3) 46 23 28
35 (4) 42 23 28
50 65 33 40
50 (1) 60 33 40
63 75 42 50
75 (2) 75 50 50
Recommended voltage VOLTAGE RAIL (V) CAPACITOR VOLTAGE RATING (V)
derating guidelines ≤ 3.3 6.3
(below 85 °C) (5)
5 10
10 20
12 25
15 35
24 50 or series configuration
28 63 or series configuration
≥ 32 75 or series configuration
Notes
• All information presented in this document reflects typical performance characteristics
• For more information about recommended voltage derating see: www.vishay.com/doc?40246
(1) Capacitance values 15 μF and higher
(2) For 293D and TR3 only
(3) Capacitance values lower than 33 μF
(4) Capacitance values 33 μF and higher
(5) For temperatures above +85 °C the same voltage derating ratio is recommended, but with respect to category voltage: up to +85 °C:
category voltage = rated voltage; at +125 °C: category voltage = 2/3 of rated voltage, between these temperatures it decreases linearly -
see graph below
Revision: 19-Sep-2022 1 Document Number: 40192

www.vishay.com
Vishay Sprague
CATEGORY VOLTAGE VS. TEMPERATURE

Axis Title
1.2 10000
1.0
Category Voltage (V)

0.8 1000
2nd line
1st line
2nd line
0.6
0.4 100
0.2
0 10
-55 0 25 55 85 105 125
Temperature (°C)
TYPICAL LEAKAGE CURRENT TEMPERATURE FACTOR

Axis Title
100 10000
10
Leakage Current Factor
+175 °C
+150 °C 1000
1 +125 °C
2nd line
1st line
2nd line
85 °C
0.1 +55 °C
100
+25 °C
0.01
0 °C
-55 °C
0.001 10
0 10 20 30 40 50 60 70 80 90 100
Percent of Rated Voltage
Note
• At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.
At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.
At +175 °C, the leakage current shall not exceed 18 times the value listed in the Standard Ratings table

www.vishay.com
Vishay Sprague
ENVIRONMENTAL PERFORMANCE CHARACTERISTICS

ITEM CONDITION POST TEST PERFORMANCE
Surge voltage Post application of surge voltage (as specified in Capacitance change Within ± 10 % of initial value
the table above) in series with a 33 Ω resistor at Dissipation factor Initial specified limit
the rate of 30 s ON, 30 s OFF, for 1000 successive Leakage current Initial specified limit
test cycles at 85 °C.
Life test at +85 °C 1000 h application of rated voltage at 85 °C. Capacitance change Within -20 % / +10 % of initial value
MIL-STD-202, method 108 Dissipation factor Initial specified limit
Leakage current Shall not exceed 125 % of initial limit
Life test at +125 °C 1000 h application 2/3 of rated voltage at 125 °C. Capacitance change Within -20 % / +10 % of initial value
MIL-STD-202, method 108 Dissipation factor Initial specified limit
Humidity tests At 60 °C / 90 % RH 1000 h, biased Capacitance change Within -10 % / +20 % of initial value
Dissipation factor Not to exceed 150 % of initial limit
Thermal shock MIL-STD-202, method 107, test condition A Capacitance change Within ± 10 % of initial value
(-55 °C / +85 °C, for 1000 cycles) Dissipation factor Initial specified limit
Leakage current Initial specified limit
MECHANICAL PERFORMANCE CHARACTERISTICS

TEST CONDITION CONDITION POST TEST PERFORMANCE
Terminal strength / Apply a pressure load of 17.7 N for 60 s horizontally Capacitance change Within ± 10 % of initial value
shear force test to the center of capacitor side body. Dissipation factor Initial specified limit
There shall be no mechanical or visual damage to capacitors
post-conditioning.
Vibration MIL-STD-202, method 204, condition D, Electrical measurements are not applicable, since the same
10 Hz to 2000 Hz, 20 g peak, 8 h, at rated voltage parts are used for shock (specified pulse) test.
post-conditioning.
Shock MIL-STD-202, method 213, condition I, Capacitance change Within ± 10 % of initial value
(specified pulse) 100 g peak Dissipation factor Initial specified limit
post-conditioning.
Resistance to Recommended reflow profiles temperatures and Capacitance change Within ± 10 % of initial value
soldering heat durations are located within the Capacitor Series Dissipation factor Initial specified limit
Guides Leakage current Initial specified limit
MIL-STD-202, method 210, condition B There shall be no mechanical or visual damage to capacitors
post-conditioning.
Solderability and MIL-STD-202, method 208, ANSI/J-STD-002, test There shall be no mechanical or visual damage to capacitors
dissolution of B (SnPb) and B1 (lead (Pb)-free). Dissolution of post-conditioning.
metallization metallization: method D.
Does not apply to gold terminations.
Flammability Encapsulation materials meet UL 94 V-0 with an
oxygen index of 32 %.

Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023 1 Document Number: 91000

TR 3

Uploaded by

Copyright:

Available Formats

TR 3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TR 3

Uploaded by

Copyright:

Available Formats

Upgrade for High Reliability With T83

Revision: 21-Nov-2023 1 Document Number: 40080

DIMENSIONS in inches [millimeters]

CASE CODE EIA SIZE L W H P TW TH (MIN.)

RATINGS AND CASE CODES

0.22 A (6.00) A (10.0)

0.33 A (6.00) A (7.00)

0.47 A (7.00) A (4.00), B (6.00),

0.68 A (6.00) A (6.00, 4.00)

A (6.00, 4.00, B (4.00, 2.00), D (3.00,

A (3.20, 3.00, B (2.00, 1.50, C (0.90, 0.475), D (0.70, 0.60,

Revision: 21-Nov-2023 2 Document Number: 40080

RATINGS AND CASE CODES

Revision: 21-Nov-2023 3 Document Number: 40080

RATINGS AND CASE CODES

ADDITIONAL MARKING EXAMPLES

Capacitance Indicates Indicates

V 104Z Polarity 22 P10

Revision: 21-Nov-2023 4 Document Number: 40080

ADDITIONAL MARKING EXAMPLES

2 digits date code Vishay marking

Revision: 21-Nov-2023 5 Document Number: 40080

Revision: 21-Nov-2023 6 Document Number: 40080

Revision: 21-Nov-2023 7 Document Number: 40080

Revision: 21-Nov-2023 8 Document Number: 40080

Revision: 21-Nov-2023 9 Document Number: 40080

Revision: 21-Nov-2023 10 Document Number: 40080

Revision: 21-Nov-2023 11 Document Number: 40080

Revision: 21-Nov-2023 12 Document Number: 40080

Revision: 21-Nov-2023 13 Document Number: 40080

Revision: 21-Nov-2023 14 Document Number: 40080

Revision: 21-Nov-2023 15 Document Number: 40080

Revision: 21-Nov-2023 16 Document Number: 40080

Revision: 21-Nov-2023 17 Document Number: 40080

Revision: 21-Nov-2023 18 Document Number: 40080

TYPICAL CURVES AT +25 °C, IMPEDANCE AND ESR VS. FREQUENCY

Impedance / ESR (Ω)

470 μF, 4 VDC 330 μF, 6.3 VDC

STANDARD PACKAGING QUANTITY

Revision: 21-Nov-2023 19 Document Number: 40080

INTRODUCTION Rating for rating, tantalum capacitors tend to have as much

Revision: 08-Mar-2023 1 Document Number: 40074

MOLDED CHIP CAPACITOR

Revision: 08-Mar-2023 2 Document Number: 40074

TYPE Surface-mount TANTAMOUNT™, molded case

SOLID TANTALUM CAPACITORS - MOLDED CASE

TYPE Surface-mount TANTAMOUNT™, molded case

Revision: 08-Mar-2023 3 Document Number: 40074

High reliability, High reliability,

LEAKAGE 0.005 CV or 0.25 μA,

100 % matte tin;

Revision: 08-Mar-2023 4 Document Number: 40074

PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]

Revision: 08-Mar-2023 5 Document Number: 40074

RECOMMENDED REFLOW PROFILES

PROFILE FEATURE SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY

PEAK PACKAGE BODY TEMPERATURE (Tp)

PAD DIMENSIONS in inches [millimeters]

Revision: 08-Mar-2023 6 Document Number: 40074