Triple-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electr. Downtilt
Triple-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electr. Downtilt
Triple-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electr. Downtilt
16°
790 – 960 790 – 960 1920 – 2170 1920–2170
–45° +45° –45° +45°
10 10
3
dB
dB
0
7-16 7-16 7-16 7-16 7-16 7-16
Horizontal Pattern Vertical Pattern
0°– 14° electrical downtilt
Mechanical specifications
1710 –1880 +45°/ –45° Polarization
Input 6x 7-16 female (long neck)
65°
125°
Connector position Bottom
Subject to alteration.
7.4°
Adjustment 3x, Position bottom
mechanism continuously adjustable
10 10
3
Wind load Frontal: 600 N (at 150 km/h)
dB
dB
Category of
M (Medium)
120° 61° mounting hardware
6.7° Weight 19 kg / 21 kg (clamps incl.)
Packing size 1696 x 282 x 182 mm
10 10
Scope of supply Panel and 2 units of clamps
for 50 – 115 mm diameter
dB
dB
3 3
Accessories 72
64
9
Weight
Type No. Description Remarks Units per antenna
approx.
1384
1417
1455
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material: Reflector screen: Weather-proof aluminum.
Fiberglass housing: It covers totally the internal antenna components.
The special design reduces the sealing areas to a minimum and
guarantees the best weather protection. Fiberglass material guarantees
optimum performance with regards to stability, stiffness, UV resistance
and painting. The colour of the radome is light grey.
All screws and nuts: Stainless steel or hot-dip galvanized steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-
mental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C
Adjustment mechanism
Ice protection: Due to the very sturdy antenna construction and the with integrated scale
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests: Kathrein antennas have passed environmental tests as recommended
in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
Layout of interface:
146*
167*
108
46
49
60
167
184
Bottom view
Subject to alteration.
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
936.3859/b
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.