Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Pump Models S8C1 460V 3P S8C1 575V 3P: The Gorman Rupp Company

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

ACU PUBLICATION NUMBER PL-04194-03

February 5, 2008
Use With: OM-04151 Rev. A 03‐22‐12
MR-04204

PUMP MODELS
S8C1 460V 3P
S8C1 575V 3P

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


www.grpumps.com
GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.
e2008 The Gorman‐Rupp Company
Register your new
Gorman‐Rupp pump online at
www.grpumps.com
Valid serial number and e‐mail address required.

RECORD YOUR PUMP MODEL AND SERIAL NUMBER

Please record your pump model and serial number in the


spaces provided below. Your Gorman‐Rupp distributor
needs this information when you require parts or service.

Pump Model:
Serial Number:
S SERIES PUMP PL-04194

PERFORMANCE CURVE - SECTION A


RECORDING MODEL AND SERIAL PERFORMANCE CURVE
NUMBERS
Please record the pump model and serial number The performance curve below is based on 70_ F
in the spaces provided below and in the separate (21_ C) clear water at sea level. Since pump instal­
Installation/Operation Manual accompanying your lations are seldom identical, your performance
pump. Your Gorman‐Rupp distributor needs this may be different due to such factors as viscosity,
information when you require parts or service. specific gravity, elevation, temperature, and impel­
ler trim.
Pump Model:

Serial Number: If your pump serial number is followed by an “N”,


your pump is NOT a standard production model.
WARRANTY INFORMATION Contact the Gorman‐Rupp Company to verify per­
The pump warranty is provided as part of formance or part numbers.
Gorman‐Rupp's support program for customers
who operate and maintain their equipment as
described in this manual and other accompanying
literature. Please note that should the equipment
be abused or modified to change its performance
beyond the original factory specifications, the war­ Pump speed and operating condition
ranty will become void and any claim will be de­ points must be within the continuous per­
nied. formance range shown on the curve(s).

Performance Curve - Model S8C1 460V 3P And S8C1 575V 3P

PART LIST MANUAL PAGE A - 1


ACU
S8C1 460V/575V 3P
S/N 1388717 UP
PUMP ISSUE 3
PARTS PAGE

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company 1 of 6


FEBRUARY 5, 2008
Page 150.8 C2
S8C1 460V/575V 3P ACU

S/N 1388717 UP
PUMP ISSUE 3

If your pump serial number is followed by an “N”, your pump is NOT a standard production model. Contact the Gorman‐
Rupp Company to verify part numbers.

ITEM PART NAME PART MAT'L QTY ITEM PART NAME PART MAT'L QTY
NO. NUMBER CODE NO. NUMBER CODE

1 DIFFUSER 38632-023 11030 1 46 SOC HD CAPSCREW BD0503 17000 6


2 IMPELLER 38623-517 11030 1 47 GASKET 38682-812 20000 1
3 LOWER SEAL ASSY 46512-055 --- 1 48 STRAINER SCREEN 10090 1599V 1
4 UPPER SEAL ASSY 25271-947 --- 1 49 PIPE 31413-026 15079 6
5 DIFFUSER GASKET 38682-813 20000 1 50 HEX HD CAPSCREW B1024 15991 6
6 SEAL CAVITY PIPE PLUG P06 17000 1 51 BASE PLATE 10036 13080 1
7 MTR CAVITY DRAIN PLUG P06 17000 1 52 GASKET 38683-817 20000 1
8 MTR CAVITY FILL PLUG P06 17000 1 53 STUD C1211 1706G 8
9 INTERMEDIATE 38261-022 13040 1 54 HEX NUT D12 17000 8
10 GASKET 38684-703 20000 1 55 LOCK WASHER J12 17000 8
56 SUCTION HEAD 38246-033 10010 1
11 GASKET 10062G 20000 1
57 WEAR RING 38691-309 14000 1
12 GASKET 10038G 20000 1
13 HEX HD CAPSCREW B0608 15991 4 58 IMPELLER WASHER 11199 17000 1
14 LOCK WASHER J06 15991 4 59 JAM NUT AT20S 17000 1
15 GASKET 10085G 20000 1 60 RETAINING RING S264 --- 1
16 BEARING CAP 10085 10010 1 61 BAIL 10039 2400V 1
17 STATOR ASSY (460V) 47113-077 --- 1 62 HEX HD CAPSCREW B1210 15991 2
17 STATOR ASSY (575V) 47113-078 --- 1 63 LOCK WASHER J12 15991 2
18 ROTOR & SHAFT ASSY 47112-077 --- 1 64 FLAT WASHER K12 15991 2
19 PIPE PLUG P06 17000 1 65 BUSHING 10045 15071 2
20 BALL BEARING S1077 --- 1 NOT SHOWN:
21 MOTOR HOUSING 42822-015 24130 1 CONTROL BOX
-460V 27515-507 --- 1
22 GASKET 1759G 18000 1
-575V 27515-517 --- 1
23 FLANGE 1759 10010 1
24 PIPE CAP V16 11999 1 1 QT SUB MOTOR OIL 9568 --- 1
25 STREET TEE ASSY 14138 --- 1 MOTOR VOLTAGE TAG
-460V 6588BL --- 1
26 PRESS RELIEF VLV ASSY 14139 --- 1
-575V 6588BM --- 1
27 PIPE NIPPLE THA1614 15079 1
IMP KNOCKER 2177C 14070 1
28 FILL TUBE ASSY 10040 24040 1
HEATER PACK
29 STUD C1211 15991 8
-460V 27521-220 --- 1
30 HEX NUT D12 15991 8
-575V 27521-219 --- 1
31 TERM HSG & CBL ASSY 47367-061 --- 1
32 STUD C0607 15991 6
OPTIONAL:
33 DEFORM LOCK NUT DD06 15991 6
REPAIR GASKET SET 11000V --- 1
34 DRIVE SCREW BM#04-03 17000 6
HEAT‐SHRINK TUBE & 48315-004 --- 1
35 NAME PLATE 2613CY 17020 1
ADHESIVE KIT
36 BALL BEARING 23431-461 --- 1
TERM POTTING KIT 12442A --- 1
37 STUD 10443 1706G 12
ANODE PLATE ASSY 42116-002 --- 1
38 HEX NUT D10 17000 12
39 LOCK WASHER J10 17000 12
LIQUID LEVEL DEVICES:
40 SEAL PLATE 38272-707 10010 1
DIAPHRAGM TYPE GRP48-03 --- 1
41 WEAR RING 38691-309 14000 1 GRP48-06 --- 1
42 O‐RING S2207 --- 1 FLOAT TYPE 27471-180 --- 1
43 HEX HD CAPSCREW B1216 15991 20 LIQ LEV CONTRL RELAY 27521-321 --- 1
44 HEX NUT D12 15991 20
45 LOCK WASHER J12 15991 20

INDICATES PARTS RECOMMENDED FOR STOCK

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company FEBRUARY 5, 2008


2 of 6
Page 150.8 C2
ACU
S8C1 460V/575V 3P
S/N 1388717 UP
PUMP ISSUE 3

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company 3 of 6


FEBRUARY 5, 2008
Page 150.8 C2
S8C1 460V/575V 3P ACU

S/N 1388717 UP
PUMP ISSUE 3
460V 3P Terminal Housing And Cable Assembly 47367-061
If your pump serial number is followed by an “N”, your pump is NOT a standard production model. Contact
the Gorman‐Rupp Company to verify part numbers.

ITEM PART MAT'L


NO. PART NAME NUMBER CODE QTY

1 TERMINAL POST 38724-009 14100 3


2 TERMINAL COLLAR 10052A 14100 3
3 HEAT‐SHRINK TUBE 31417-030 19530 3
4 T‐TYPE LOCKWASHER AK06 15991 2
5 RD HD MACH SCREW X0603 14990 2
6 TERMINAL 27214-058 --- 1
7 TERMINAL WASHER 10659B 15991 1
8 GLAND BUSHING 10758E 19100 1
9 INFORMATION PLATE 38816-047 17990 1
10 DRIVE SCREW BM#04-03 17000 4
11 CABLE GRIP 11227F --- 1
12 TERMINAL GLAND 10658 13040 1
13 POWER CABLE 10325A --- 1
14 HEX NUT D08 15991 2
15 STUD C0808 15991 2
16 TERMINAL HOUSING 10088B 13040 1
17 TERMINAL 27214-065 --- 1
18 AL HD SETSCREW GA0602 14990 3
19 TERMINAL PLT ASSY 11163 24010 1
20 DYNA SEAL WASHER S1586 --- 3
21 AL HD SETSCREW GA0501 1/2 14990 3

NOT SHOWN:
2 OZ RTV SEALANT 18771-106 --- 1

OPTIONAL:
HEAT SHRINK TERMINAL KIT 48315-004 --- 1

INDICATES PARTS RECOMMENDED FOR STOCK

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company FEBRUARY 5, 2008


4 of 6
Page 150.8 C2
ACU
S8C1 460V/575V 3P
S/N 1388717 UP
PUMP ISSUE 3

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company 5 of 6


FEBRUARY 5, 2008
Page 150.8 C2
S8C1 460V/575V 3P ACU

S/N 1388717 UP
PUMP ISSUE 3
575V 3P Terminal Housing And Cable Assembly 47367-028
If your pump serial number is followed by an “N”, your pump is NOT a standard production model. Contact
the Gorman‐Rupp Company to verify part numbers.

ITEM PART MAT'L


NO. PART NAME NUMBER CODE QTY

1 TERMINAL POST 38724-009 14100 3


2 TERMINAL COLLAR 10052A 14100 3
3 HEAT‐SHRINK TUBE 31417-030 19530 3
4 T‐TYPE LOCKWASHER AK06 15991 2
5 RD HD MACH SCREW X0603 14990 2
6 TERMINAL 27214-062 --- 1
7 TERMINAL WASHER 31133-110 15991 1
8 GLAND BUSHING 31144-001 19100 1
9 INFORMATION PLATE 38816-047 17990 1
10 DRIVE SCREW BM#04-03 17000 4
11 CABLE GRIP 11227H --- 1
12 TERMINAL GLAND 10658 13040 1
13 POWER CABLE 10325L --- 1
14 HEX NUT D08 15991 2
15 STUD C0808 15991 2
16 TERMINAL HOUSING 10088B 13040 1
17 TERMINAL S1550 --- 1
18 AL HD SETSCREW GA0602 14990 3
19 TERMINAL PLT ASSY 11163 24010 1
20 DYNA SEAL WASHER S1586 --- 3
21 AL HD SETSCREW GA0501 1/2 14990 3

NOT SHOWN:
1 OZ RTV SEALANT 18771-106 --- 1

INDICATES PARTS RECOMMENDED FOR STOCK

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA Printed in U.S.A.

E2008 The Gorman‐Rupp Company FEBRUARY 5, 2008


6 of 6
Page 150.8 C2
For U.S. and International Warranty Information,
Please Visit www.grpumps.com/warranty
or call:
U.S.: 419-755-1280
International: +1-419-755-1352

For Canadian Warranty Information,


Please Visit www.grcanada.com/warranty
or call:
519-631-2870

THE GORMAN‐RUPP COMPANY D MANSFIELD, OHIO


GORMAN‐RUPP OF CANADA LIMITED D ST. THOMAS, ONTARIO, CANADA

You might also like