Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 92 views

    LAB 2: DHCP Configuration: December 22, 2018

    Uploaded by

    betsega shifera
    This document provides instructions for configuring a DHCP server on a router. It includes details on the network topology, address table, objectives, and tasks to configure the DHCP service. The tasks include preparing the network, basic router configuration, configuring the DHCP server and pool, assigning the router interface IP, setting the default router and DNS, and testing the DHCP configuration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LAB 2: DHCP Configuration: December 22, 2018

    Uploaded by

    betsega shifera
    92 views11 pages
    This document provides instructions for configuring a DHCP server on a router. It includes details on the network topology, address table, objectives, and tasks to configure the DHCP service. The tasks include preparing the network, basic router configuration, configuring the DHCP server and pool, assigning the router interface IP, setting the default router and DNS, and testing the DHCP configuration.

    Original Description:

    network device lecture note

    Original Title

    dhcp

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for configuring a DHCP server on a router. It includes details on the network topology, address table, objectives, and tasks to configure the DHCP service. The tasks include preparing the network, basic router configuration, configuring the DHCP server and pool, assigning the router interface IP, setting the default router and DNS, and testing the DHCP configuration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    92 views11 pages

    LAB 2: DHCP Configuration: December 22, 2018

    Uploaded by

    betsega shifera
    This document provides instructions for configuring a DHCP server on a router. It includes details on the network topology, address table, objectives, and tasks to configure the DHCP service. The tasks include preparing the network, basic router configuration, configuring the DHCP server and pool, assigning the router interface IP, setting the default router and DNS, and testing the DHCP configuration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 11

    LAB 2: DHCP Configuration

    December 22, 2018

    MEU,FET,IT www.meu.edu.et December 22, 2018 1 / 10


    Topology

    MEU,FET,IT www.meu.edu.et December 22, 2018 2 / 10


    Address Table

    Device Interface IP address Subnet Mask


    DHCPServer G0/1 192.168.10.1 255.255.255.0

    MEU,FET,IT www.meu.edu.et December 22, 2018 3 / 10


    Scenario
    In this lab, you will configure the DHCP service. One router is the
    DHCP server. The router forwards DHCP requests to the server.
    Objective
    Configure a router for Dynamic Host Configuration Protocol (DHCP)
    to dynamically assign addresses to attached hosts.

    MEU,FET,IT www.meu.edu.et December 22, 2018 4 / 10


    Preparation

    • On DHCPServer, firstly we will give an IP address to the router


    interface (g0/1) that is connected to the switch.
    • Secondly that we will create a DHCP pool named DHCPPool.
    • In this pool we will mention IP addresses that will be given to the
    DHCP clients.
    • After that we will assign the router’s interface address as a
    default-router address for clients.
    • And in the last part we will exclude some addresses that we don’t want
    to use during this dynamic IP assignments.

    MEU,FET,IT www.meu.edu.et December 22, 2018 5 / 10


    Tasks I
    Task 1: Prepare the Network
    Step 1: Cable a network that is similar to the one in the topology
    diagram.
    Step 2: Clear all existing configurations on the router.
    Task 2: Perform Basic Router Configurations
    Configure the DHCPServer router according to the following
    guidelines:
    Configure the device hostname.
    Disable DNS lookup.
    Configure a privileged EXEC mode password.
    Configure a message-of-the-day banner.
    Configure a password for the console connections.
    Configure a password for all vty connections.

    MEU,FET,IT www.meu.edu.et December 22, 2018 6 / 10


    Tasks II
    Task 3: Configure a Cisco IOS DHCP Server
    Cisco IOS software supports a DHCP server configuration called Easy
    IP. The goal for this lab is to have device on the networks
    192.168.10.0/24 request IP addresses via DHCP from DHCPServer.
    Step 1: Exclude statically assigned addresses.
    The DHCP server assumes that all IP addresses in a DHCP address pool
    subnet are available for assigning to DHCP clients. You must specify the
    IP addresses that the DHCP server should not assign to clients. These IP
    addresses are usually static addresses reserved for the router interface,
    switch management IP address, servers, and local network printer. The ip
    dhcp excluded-address command prevents the router from assigning IP
    addresses within the configured range. The following commands exclude
    the first 10 IP addresses from each pool for the LANs attached to
    DHCPServer. These addresses will not be assigned to any DHCP clients.

    DHCPServer#config terminal
    DHCPServer(config)#ip dhcp excluded-address 192.168.10.1 192.168.10.10

    MEU,FET,IT www.meu.edu.et December 22, 2018 7 / 10


    Tasks III

    Step 2: Assign IP address to DHCPServer interface G0/1 interface


    connected to switch port.

    DHCPServer#config terminal
    DHCPServer(config)#interface g0/1
    DHCPServer(config-if )# ip address 192.168.10.1 255.255.255.0

    DHCPServer(config-if )#no shutdown

    Step 3: Configure the pool.


    Create the DHCP pool using the ip dhcp pool command and name it
    DHCPPool.

    DHCPServer(config)#ip dhcp pool DHCPPool

    MEU,FET,IT www.meu.edu.et December 22, 2018 8 / 10


    Tasks IV
    Specify the subnet to use when assigning IP addresses. DHCP pools
    automatically associate with an interface based on the network
    statement. The router now acts as a DHCP server, handing out
    addresses in the 192.168.10.0/24 subnet starting with 192.168.10.1.

    DHCPServer(dhcp-config)#network 192.168.10.0 255.255.255.0


    Configure the default router and domain name server for the network.
    Clients receive these settings via DHCP, along with an IP address.

    DHCPServer(dhcp-config)#dns-server 192.168.11.5
    DHCPServer(dhcp-config)#default-router 192.168.10.1

    Step 4: Test DHCP


    After this configuration, when we check the ip address of PC0, we will
    see the IP address 192.168.10.11 . Because it is the first available address in
    DHCP pool.

    MEU,FET,IT www.meu.edu.et December 22, 2018 9 / 10


    Tasks V

    MEU,FET,IT www.meu.edu.et December 22, 2018 10 / 10


    —————————————————————–

    MEU,FET,IT www.meu.edu.et December 22, 2018 10 / 10

    You might also like