TA25

Articulated Truck

MAX. GROSS 46,010 – 96,720 lbs

VEHICLE (20,870 – 43,870 kg)
WEIGHT
GROSS ENGINE 266 hp
POWER (198 kW)
MAX PAYLOAD 25 Tons (23 t)
HEAPED 17.6 Yd3 (13.5 m3)
CAPACITY
TA25
ARTICULATED TRUCK

Specifications

Engine Transmission

Make / Model Cummins QSC 8.3 ZF 6WG 210 fully automatic transmission with manual
Type Four cycle, emission certified, direct injection override. The transmission assembly consists of a torque
diesel, 6 cylinder, in-line, water-cooled, converter close-coupled to a countershaft type gearbox
turbocharged and aftercooled. with integral output transfer gearing. Automatic shifting
throughout the range, with kick-down feature. Lockup in
Piston displacement 505 in3 (8.3 L)
all forward gears. A torque-proportioning output differential
Bore x stroke 4.49" x 5.32" (114 x 135 mm) transmits drive permanently to front and rear axles. This
Gross power at 2,000 rpm (SAE J 1995) 280 hp (224 kW) differential may be locked by the driver for use in difficult
Net power at 2,200 rpm (SAE J 1349) 266 hp (198 kW) traction conditions.
Forward Reverse
Maximum torque at 1,300 rpm 907 lbf ft (1,230 Nm)
Gear 1st 2nd 3rd 4th 5th 6th R1 R2 R3
Engine emission meets USA EPA Tier 3 / CARB MOH 40
CFR 89 Tier 3 and proposed EUNRMM (non-road mobile mph 3.7 5.6 8.8 13.7 20.1 32.3 3.7 8.8 20.1
machinery directive). 24 volt electric start. 70A alternator. km/h 5.9 9.1 14.2 22.1 32.4 52.0 5.9 14.2 32.4
Two 12 volt 175 Ah batteries. Dry-type air cleaner with
safety element, automatic dust ejector and restriction
indicator. Modulating fan reduces noise level and
consumes engine power only when required.
Specifications
Frame Steering

Front and rear frames are all-welded high grade steel fabrications with Hydrostatic power steering by two double-acting cushioned steering
rectangular box-section beams forming the main side and cross cylinders with pressure supplied by a variable displacement/load
members. Inter-frame oscillation is provided by a large diameter sensing piston pump. Secondary steering pressure is provided by a
cylindrical coupling which houses nylon bushings. Frames articulate 45° ground driven pump mounted on the transmission. An audible alarm
to either side for steering by means of two widely-spaced pivot pins in and warning light indicates should the secondary system activate.
back-to-back sealed taper roller bearings. System conforms to ISO 5010, (SAE J 53). Steering components are
protected by full flow filtration on the return line.
Axles
Steering angle to either side 45°
Three axles in permanent all-wheel drive (6 x 6) with differential
Lock to lock turns, steering wheel 4
coupling between each axle to prevent driveline wind-up. Heavy duty
axles with fully-floating axle shafts and outboard planetary reduction System pressure 3,500 psi (241 bar)
gearing. Automatic limited slip differentials in each axle. Leading rear
Hoist
axle incorporates a through-drive differential to transmit drive to the rear
most axle. This differential and the transmission output differential are Two single-stage, double-acting hoist cylinders, cushioned at both ends
locked simultaneously using one switch selected by the driver. of stroke. Variable displacement, load sensing piston pump driven from
power take-off on transmission. Full flow return line filtration. Full
Differential ratio 3.44:1
electro-hydraulic hoist control, with electronic detent in power down.
Planetary reduction 6.35:1
System pressure 3,200 psi (220 bar)
Overall drivetrain reduction 21.85:1
Pump output flow rate 77.6 gpm (4.9 L/sec)
Tires and Wheels Raise time, loaded 12 sec
Tires Standard 23.5 R 25 two star radial. Optional 750/65 R25 Power down 7.5 sec
Rims Standard 25 x 19.50. For optional tire, 25 x 22.00
Body
Wheels 5-piece earthmover rims with 12 stud fixing
All welded construction, fabricated from high hardness (min. 360 BHN)
Suspension 145,000 psi (1,000 MPa) yield strength steel.
Front: Axle is carried on the leading arms of a sub-frame which pivots Plate thicknesses: Floor and tailchute 0.47 in (12 mm)
on the main frame. Suspension by rubber elements with four heavy duty
Sides 0.47 in (12 mm)
hydraulic dampers.
Front 0.31 in (8 mm)
Axle vertical travel 5" (127 mm)
Volume: Struck (SAE) 13.1 yd3 (10.0 m3)
Rear: Each axle is coupled to the frame by three rubber-bushed links
Heaped 2:1 (SAE) 17.6 yd3 (13.5 m3)
with lateral restraint by a transverse link. Pivoting inter-axle balance
beams equalize load on each rear axle. Suspension movement is Service Capacities
cushioned by rubber/metal laminated compression units between each
Fuel tank 103.0 gal (390 L)
axle and underside of balance beam ends.
Hydraulic system (steering & body) 53.4 gal (202 L)
Axle vertical travel ± 5" (± 130 mm)
Engine crankcase 5.3 gal (20 L)
Axle oscillation ± 12°
Cooling system 14.5 gal (55 L)
Pivot points on leading and trailing links are rubber-bushed and
maintenance-free. Transmission (including filters & cooler) 14.3 gal (54 L)
Differentials - front & rear (each) 4.5 gal (17 L)
Brakes
Differential - center 4.9 gal (18.5 L)
All hydraulic braking system with dry disc on each wheel and double
heavy-duty calipers per disc. Independent circuits for front and rear Planetaries (each) 0.8 gal (3.0 L)
brake systems. Brake system conforms to ISO 3450, (SAE J 1473).
Parking Spring-applied, hydraulic-released disc on rear driveline
Secondary Secondary brake control actuates
rear service and parking brakes
RetardationGuillotine-type engine exhaust brake is standard and operates
automatically should the engine approach overspeed condition

2
 Articulated Truck
TA25

Standard Equipment Optional Equipment

CAB Body Up GENERAL Television monitor, rear view
Air conditioner R 134A Brake pressure balance Auto lube system Tool kit, hand
27,300 BTU/hr (8kW) Engine maintenance Cold start kit Tires, 750/65 R25
Cigarette lighter, 24V Front/rear brake pressures Fast fuel adapter BODY OPTIONS
Coat hook Check engine Fire extinguisher Exhaust heating
Engine diagnostic facility Fuel, low level First aid kit Liner plates
Heater and de-mister 32,400 Secondary steering Headlamp guards, hinged Side extensions
BYU/hr (9.5w)
Inter-axle diff locks "on" Mirror, front mounted Spillguard extensions
Hydraulic diagnostic facility
Parking brake "on" Mirror, wide angle Tailgate, scissor-chain operated
RS232
Steering pressure Mirrors, heated Tailgate - underhinged
Inspection lamp socket, 24V
Stop engine Mud flaps, in front of leading LIGHTS
Insulation, thermal and acoustic
Transmission "stop" rear wheels Beacon, flashing
Interior Light
Warning lights test button Parking brake guard Fog, rear
Mirrors, rear view (4)
Audible warning of low brake Seat, heated Reverse, flashing
Mug holder
pressure Tachograph Working, rear-facing
Radio/Cassette player
GENERAL
ROPS/FOPS protection
Air Filter, dual element with
(ISO 3471/3449, SAE J 1040, Weights
restriction indicator
Apr 88/SAE J231)
Articulation locking bar Net Distribution
Seat belts, retractable
(SAE J 386) Articulation locking bar and Front axle 24,050 lbs (10,910 kg)
oscillation lock pin
Seat, operator air suspension, Bogie axle, leading 10,890 lbs (4,940 kg)
high back, headrest and Battery master switch
adjustable arm rests Body prop Bogie axle, trailing 11,070 lbs (5,020 kg)
Seat, passenger Brake splash guards Vehicle, Net 46,010 lbs (20,870 kg)
Steering wheel, tilt/telescopic Diagnostic pressure test points
Payload 50,710 lbs (23,000 kg)
Storage compartment Downshift inhibitor
Gross Distribution
Sun blind Engine hood, hinged
Tinted glass Engine underguard, hinged Front axle 32,210 lbs (14,610 kg)
Transmission visual display unit Exhaust muffler Bogie axle, leading 32,100 lbs (14,560 kg)
Window protection grille, rear Fan, modulating Bogie axle, trailing 32,410 lbs (14,700 kg)
Wiper and washer, front and Horn, electronic 117db
Vehicle, Gross 96,720 lbs (43,870 kg)
rear windows Hydraulic filter restriction
GAUGES indicator Bare chassis 37,345 lbs (16,940 kg)
Fuel Level Hydraulic oil cooler Body 7,495 lbs (3,400 kg)
Hourmeter Mudflaps front Hoists, pair 1,170 lbs (530 kg)
Speedometer, with odometer Neutral start interlock
Tachometer, with hourmeter Nitrogen inflated tires
Transmission oil temperature Rear light guards
Water temperature Reverse alarm, audible
INDICATOR LIGHTS (SAE J994)
Direction indicators Security kit
Headlight high beam Servo body hoist
Turn signals Tow points, front and rear
AUDIBLE ALARMS Transmission oil cooler with
modulating fan
Brakes, tractor, low pressure
Transmission sump guard
Brakes, trailer, low pressure
LIGHTS
Engine Stop
Headlamps, 4, halogen
Transmission stop
Highlevel working lamps
Steering, low pressure
Side, tail, stop, reverse &
WARNING LIGHTS
hazard warning and direction
Alternator not charging indicators

3
Articulated Truck
TA25
Performance Data (Graphs Based On 2% Rolling Resistance)
GRADEABILITY VEHICLE WEIGHT RETARDA TION VEHICLE WEIGHT
30 40 50 60 80 100 140 lb x 1 000 30 40 50 60 80 100 140 lb x 1 000

lbf x kN kgf x 15 20 30 40 50 60 kg x 1 000 lbf x kN kgf x 15 20 30 40 50 60 kg x 1 000

1 000 1 000 1 000 1 000
400 40 400 40
80 80
Net VW Gross VW 50 40 30 300 Exhaust Brake Net VW Gross VW 50 40 30
300 30 30
60 60
25 25
50 50
200 20 20 200 20 20
40 1C 40
1
150 15 15 150 15 15

TOTA L % RESISTANCE Rolling minus Grade

TOTA L % RESISTANCE Rolling plus Grade
30 1L 30
12 12
TRACTIVE EFFORT (RIMPULL)

2
100 10 10 100 10 10
20 2 20
9 9
80 80 3
8 8 8 8
15 7 15 7
60 6 6 60 6 6
50 5 3 5 50 5 5
10 10 4
40 4 4 40 4 4
8 8 5
4
30 3 3 30 3 3
6 5 6
6
5 5
20 2 2 20 2
4 6 4
15 1.5 15 1.5
3 3

10 1.0 10 1.0
km/h 0 10 20 30 40 50 60 km/h 0 10 20 30 40 50 60
SPEED SPEED
mile/h 0 5 10 15 20 25 30 35 mile/h 0 5 10 15 20 25 30 35

Instructions: From intersection of vehicle weight and percentage resistance line read across to determine maximum gear attainability and ten downward for speed.

Dimensions

19' 8"
(6 m)
65˚

16' 5"
(5 m)
16' 2"
(4.7 m)
11' 3"
(3.5 m)
11' 2"
(3.4 m)
9' 10" 8' 6"
(3 m) (2.6 m)

7' 0"
(2.1 m)
1' 6" 2' 3"
(405 mm) (725 mm)
5' 3"
(1.6 m)
7' 2" 7' 9" 4' 4" 9' 8" 5' 6" 4' 9"
(2.2 m) (2.4 m) (1.3 m) (2.9 m) (1.7 m) (1.4 m)
9' 6" 32' 0"
(3 m) (9.8 m)

Max. 8' 9"

Body 3' 8" (2.7 m)
Depth (1.1 m)
9' 5"
(2.9 m)

45˚

For more information, product demonstration, or details on purchase, lease and rental
plans, please contact your local Terex Distributor.

Terex Construction Americas

8800 Rostin Road TEL 662-393-1800
Southaven, MS 38671 SALES 866-837-3923
USA PARTS & TECH SUPPORT 888-201-6008
FAX 662-393-1700
EMAIL sales@terexca.com
WEB terexca.com
Effective date: August 15, 2006. For further information, please contact your local distributor or the Terex sales office listed. Product specifications are subject to change without notice or obligation. The photographs and drawings
in this brochure are for illustrative purposes only. Refer to the appropriate Operator's Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator's Manual when using our equipment
or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular product
and sale. Terex makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries and
all rights are reserved. "Terex" is a Registered Trademark of Terex Corporation in the USA and many other countries. Copyright ©2006 Terex Corporation
TA25 .5K 1006A Part #109087