Metallic Material Specifications\MS-06-304\AF|Released|SV_ProdSRPC| for 2010686\AB |Tue Aug 21 06:49:45 CEST 2018|Scale =1.

PDM # MS-06-304
Revision: AF
Date: 05-JULY-2018
SPECIFICATION Page: 1 of 3
TITLE: Cast or Wrought 17.4 PH Stainless Steel

1.0 SCOPE
This specification covers the requirements for cast or wrought 17-4 PH precipitation hardening
stainless steel components that are used in thrust bearing manufacturing.
2.0 APPLICABLE DOCUMENTS
ASTM A 747/A 747M Steel Casting, Stainless, Precipitation Hardening
ASTM A564 Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and
Shapes
ASTM A370 Test Methods and Definitions
AMS 2175 Classification and Inspection of castings
3.0 ENGINEERING REQUIREMENTS
3.1 Material Precipitation Hardening Stainless Steel.
3.2 Chemical Composition (Cast 17-4 PH stainless steel)
Carbon --------------------------------------------------------------------------------------------- 0.07% max
Manganese --------------------------------------------------------------------------------------- 0.70% max
Silicon ---------------------------------------------------------------------------------------------- 1.00% max
Phosphorus ------------------------------------------------------------------------------------- 0.035% max
Sulfur ----------------------------------------------------------------------------------------------- 0.03% max
Chromium ------------------------------------------------------------------------------------- 15.5 to 17.7%
Nickel---------------------------------------------------------------------------------------------- 3.6 to 4.6%
Columbium ----------------------------------------------------------------------------------- 0.15 to 0.35%
Copper ----------------------------------------------------------------------------------------- 2.50 to 3.20%
Nitrogen ------------------------------------------------------------------------------------------- 0.05% max
3.3 Chemical Composition (Wrought 17-4 PH stainless steel)
Carbon --------------------------------------------------------------------------------------------0.07% max
Manganese ---------------------------------------------------------------------------------------1.00%
max
Phosphorous -----------------------------------------------------------------------------------0.040% max
Sulphur ------------------------------------------------------------------------------------------0.030% max
Silicon ---------------------------------------------------------------------------------------------1.00% max
Chromium ----------------------------------------------------------------------------------15.0 to 17.50%
Nickel ------------------------------------------------------------------------------------------3.00 to 5.00%
Do not disclose, use or reproduce without written approval from Schlumberger.

Warning: The controlled source document of this document is stored within the Product Data Management (PDM) System Any paper version
of this document is uncontrolled and should be compared with the source document at time of use to ensure it is up-to-date.
Metallic Material Specifications\MS-06-304\AF|Released|SV_ProdSRPC| for 2010686\AB |Tue Aug 21 06:49:45 CEST 2018|Scale =1.0

PDM # MS-06-304
Revision: AF
Date: 05-JULY-2018
SPECIFICATION Page: 2 of 3
TITLE: Cast or Wrought 17.4 PH Stainless Steel

Copper ----------------------------------------------------------------------------------------3.00 to 5.00%

Columbium + Tantalum-------------------------------------------------------------------0.15 to 0.45%
Iron ----------------------------------------------------------------------------------------------------Balance

3.4 Physical Properties (applicable for both cast and wrought 17-4 PH stainless steel)
3.4.1 Heat Treatment Condition H1075
Ultimate Tensile Strength ------------------------------------------- 145,000 psi minimum
Yield Strength (0.2%) ------------------------------------------------- 115,000 psi minimum
Elongation in 2 inches, % -------------------------------------------------------- 9% minimum
Hardness ---------------------------------------------------------277 - 311 HB (29 – 33 HRC)
3.4.2 Heat Treatment Condition H1150
Ultimate Tensile Strength ------------------------------------------- 125,000 psi minimum
Yield Strength (0.2%) --------------------------------------------------- 97,000 psi minimum
Elongation in 2 inches, % ------------------------------------------------------ 10% minimum
Hardness ---------------------------------------------------------269 - 311 HB (28 – 33 HRC)
3.5 Acceptance Standard (for cast 17-4 PH stainless steel only):
AMS 2175, Class 3, Grade C

4.0 PRODUCT ASSURANCE

4.1 A certified test report, showing mechanical and physical properties shall be submitted to
Schlumberger Quality.
4.2 The casting shall conform to the dimensions on the casting print. Surfaces of the
castings shall be free of burnt-on sand, smooth and well cleaned. Runners, risers, fins
and other useless cast-on pieces shall be removed.
4.3 The casting shall be homogenous and free from shrinkage cracks, blowholes, sand holes,
hard spots, foreign matter and other injurious defects and shall not expose defects
when machining.
4.4 Sample castings from new or reworked patterns shall be approved by Schlumberger
prior to production release.

Do not disclose, use or reproduce without written approval from Schlumberger.

Warning: The controlled source document of this document is stored within the Product Data Management (PDM) System Any paper version
of this document is uncontrolled and should be compared with the source document at time of use to ensure it is up-to-date.
Metallic Material Specifications\MS-06-304\AF|Released|SV_ProdSRPC| for 2010686\AB |Tue Aug 21 06:49:45 CEST 2018|Scale =1.0

PDM # MS-06-304
Revision: AF
Date: 05-JULY-2018
SPECIFICATION Page: 3 of 3
TITLE: Cast or Wrought 17.4 PH Stainless Steel

5.0 PREPARATION FOR DELIVERY

5.1 Packaging
Parts made from this material shall be packaged in standard commercial containers so
constructed as to ensure acceptance by common or other carriers for safe transportation
at the lowest rate to the point of delivery, unless otherwise specified.
5.2 Marking
Each shipping container shall be marked in accordance with the current D.O.T.
regulations outlined in 49 CFR 172.300, as well as current OSHA regulations outlined in
29CFR 1910.1200. In addition, each shipping container shall be legibly marked with the
following information:
Schlumberger Purchase Order Number
Schlumberger Part Number
Ma ufacturer’s Na e or Mark
Quantity
Trade Name or Material

6.0 Required Approvals: (REDA_SPECS)

Do not disclose, use or reproduce without written approval from Schlumberger.

Warning: The controlled source document of this document is stored within the Product Data Management (PDM) System Any paper version
of this document is uncontrolled and should be compared with the source document at time of use to ensure it is up-to-date.