Manual Canon

ENGLISH
DIGITAL CAMERA
Camera User Guide
Camera User Guide

z Please read the Read This First section (p. 4).
CDI-E175-010 XXXXXX © 2004 CANON INC. PRINTED IN JAPAN z Please also see the Software Starter Guide and the Direct Print User Guide.
Disclaimer Trademark Acknowledgements
• While every effort has been made to ensure that • Macintosh, Mac OS and QuickTime are
the information contained in this guide is trademarks of Apple Computer Inc., registered in
accurate and complete, no liability can be the United States and/or other countries.
accepted for any errors or omissions. • Microsoft® and Windows® are either registered
• Canon reserves the right to change the trademarks or trademarks of Microsoft
specifications of the hardware and software Corporation in the United States and/or other
described herein at any time without prior countries.
notice. • SD is a trademark.
• No part of this guide may be reproduced, • Other names and products not mentioned above
transmitted, transcribed, stored in a retrieval may be registered trademarks or trademarks of
system, or translated into any language in any their respective companies.
form, by any means, without the prior written Use of genuine Canon accessories is
permission of Canon. recommended.
• Canon makes no warranties for damages This product is designed to achieve excellent
resulting from corrupted or lost data due to a performance when used with genuine Canon
mistaken operation or malfunction of the accessories. Canon shall not be liable for any
camera, the software, memory cards, personal damage to this product and/or accidents such as
computers, peripheral devices, or use of non- fire, etc., caused by the malfunction of non-
Canon memory cards. genuine Canon accessories (e.g., a leakage and/
or explosion of a battery pack). Please note that
this warranty does not apply to repairs arising out
of the malfunction of non-genuine Canon
accessories, although you may request such
repairs on a chargeable basis.
0
Flowchart and Reference Guides Symbols Used
This Guide Icons under title bars show the available shooting
modes. As in the example below, the shooting
Shooting with the Camera mode dial should be set to , , , , ,
, , , , , or .
Software Starter Guide Using the Flash

Installing the Software
Mode Dial
This Guide
Connecting the Camera to a Computer This mark denotes issues that may affect the
camera’s operation.
This Guide
Software Starter Guide This mark denotes additional topics that
complement the basic operating procedures.
Downloading Images to a Computer
Direct Print User Guide This camera can use SD* memory cards or
Printer User Guide MultiMediaCards.
Using the Printer and Printing * SD=Secure Digital, a copyright protection system.
1
Table of Contents
Items marked with are lists or charts that Slow Shutter ....................................... 38
summarize camera functions or procedures. Changing the Resolution and Compression.... 40
Read This First 4 Using the Flash ......................................... 42
Macro Mode .............................................. 44
Please Read ......................................................4
Self-timer......................................................... 45
Safety Precautions ............................................6 Digital Zoom .................................................... 47
Preventing Malfunctions ..................................11
Continuous Shooting....................................... 48
Components Guide 12 Shooting Panoramic Images (Stitch Assist)... 49
Preparing the Camera 15 Special Scene Mode ................................. 51
Postcard Print Mode........................................ 54
Installing the Batteries .....................................15
Installing the Memory Card .............................18 Movie Mode .............................................. 56
Formatting Memory Cards ........................19 Playback – The Basics 58
Setting the Date/Time......................................22 Displaying Images Individually (Single Image Playback).. 58
Setting the Language ......................................23 Magnifying Images.................................... 59
Using the LCD Monitor ....................................24 Viewing Images in Sets of Nine (Index Playback).. 60
Basic Functions 30 Jumping between Images ............................... 61
Turning the Power On/Off ...............................30 Viewing/Editing Movies ................................... 61
Switching between Shooting and Playback.....32 Erasing 65
Shooting – The Basics 33 Erasing Images Individually ...................... 65
Auto Mode...............................................33 Erasing All Images .......................................... 65
Reviewing an Image Right after Shooting .......36 Shooting – Advanced Functions 66
Using the Mode Dial (Image Zone) .................38 Selecting Menus and Settings......................... 66
Portrait ................................................38 Menu Settings and Default Settings................ 69
Landscape ..........................................38 Resetting the Settings to Default..................... 75
Night Scene ........................................38 Using the Mode Dial (Creative Zone).............. 76
Fast Shutter ........................................38 Program AE ....................................... 77
2
Table of Contents
Setting the Shutter Speed ..................77 List of Messages 121

Setting the Aperture ...........................79 Troubleshooting 123
Manually Setting the Shutter Speed and Aperture ..80
Switching between Focusing Modes ...............81 Appendix 129
Switching between Metering Modes................82 Using the Power Kits (Sold Separately) ........ 129
Adjusting the Exposure ...................................83 Using the Lenses (Sold Separately).............. 132
Adjusting the Tone (White Balance) ................84 Using an Externally Mounted Flash (Sold Separately) .. 136
Changing the ISO Speed ................................87 Replacing the Date Battery ........................... 137
Changing the Photo Effect ..............................88 Camera Care and Maintenance .................... 139
Adjusting the Flash Output ..............................89 Specifications 140
Shooting Hard-to-Focus Subjects ...................90
Setting the Auto Rotate Function ....................92 Battery Performance ..................................... 144
Memory Cards and Estimated Capacities
Playback – Advanced Functions 94 (Recordable Images)................................... 145
Rotating Images in the Display........................94 Photo Tips and Information 151
Attaching Sound Memos to Image ..................95
Auto Play .........................................................96 INDEX 153
Protecting Images ...........................................97 Functions Available in Each Shooting Mode .. 159
Various Functions 98
About Printing ..................................................98
DPOF Print Settings ......................................100
Image Transmission Settings (DPOF Transfer Order) ...104
Downloading Images to a Computer .............106
Computer System Requirements ............107
Viewing Images on a TV Set .........................114
Resetting the File Number.............................115
Customizing the Camera (My Camera Settings) ..117
Registering My Camera Settings...................118
3
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you shoot several trial images
to confirm that the camera is operating and being operated correctly. Please note that Canon Inc., its
subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from
any malfunction of a camera or accessory, including memory cards, that results in the failure of an image
to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and should never be used in a
manner that infringes upon or contravenes international or domestic copyright laws and regulations.
Please be advised that in certain cases the copying of images from performances, exhibitions, or
commercial properties by means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If a problem arises while the camera is in
use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a
Canon Customer Support Help Desk.
For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your
camera.
4
Read This First
Camera Body Temperature

If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this
and take care when operating the camera for an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99%
of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as
red or black dots.
This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region before using it with a TV
monitor (p. 115).
Language Setting
Please see page 23 to change the language setting.
5
Read This First
Safety Precautions
z Before using the camera, please ensure that you read and understand the safety precautions described
below. Always ensure that the camera is operated correctly.
z The safety precautions noted on the following pages are intended to instruct you in the safe and correct
operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and
equipment.
z In the next few pages, the term “equipment” refers primarily to the camera and its power supply
accessories (see the System Map for power supply accessory details).
Storing memory cards
Store the memory card out of the reach of children and infants.
It may be swallowed accidentally. If this occurs, consult a doctor immediately.
WARNINGS
z Do not aim the camera directly into the sun or at other intense light sources that could damage
your eyesight.
z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light
produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away
from infants when using the flash.
z Store this equipment out of the reach of children and infants. Accidental damage to the camera or
batteries by a child could result in serious injury. In addition, placement of the strap around a child’s neck
could result in asphyxiation.
z Be particularly careful to keep the date battery used in the camera away from children. Seek
medical assistance immediately if a child swallows a battery.
6
Read This First
z Do not attempt to disassemble or alter any part of the equipment that is not expressly described
in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections,
alterations and repairs should be conducted by qualified service personnel authorized by your camera
distributor or a Canon Customer Support Help Desk.
z To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if
it has been damaged. Similarly, never touch internal portions of the equipment that become exposed
as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to
consult your camera distributor or a Canon Customer Support Help Desk.
z Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so
may result in fire or electrical shock. Immediately turn the camera’s power off, remove the camera
batteries or unplug the power cord from the power outlet. Confirm that smoke or fume emissions have
ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
z Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result
in fire or electrical shock. Immediately turn the camera’s power off, remove the camera batteries or
unplug the power cord from the power outlet. Please consult your camera distributor or the closest
z Do not allow the equipment to come into contact with, or become immersed in, water or other
liquids. Do not allow liquids to enter the interior. The equipment has not been waterproofed. If the
exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event
that water or other foreign substances enter the interior, immediately turn the camera’s power off and
remove the camera batteries or unplug the power cord from the power outlet. Continued use of the
equipment may result in fire or electrical shock. Please consult your camera distributor or the closest
z Do not use substances containing alcohol, benzene, thinners or other flammable substances to
clean or maintain the equipment. The use of these substances may lead to fire.
7
Read This First
z Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects
on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy
environments, the dust that collects around the plug over long periods of time may become saturated
with humidity and short-circuit, leading to fire.
z Do not cut, damage, alter or place heavy items on the power cord. Any of these actions may cause
an electrical short circuit, which may lead to fire or electrical shock.
z Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical
shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pulling on the
flexible portion of the cord may damage or expose the wire and insulation, creating the potential for fires
or electrical shocks.
z Use only the recommended power accessories. Use of power sources not expressly recommended
for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other
hazards.
z Do not place the batteries near a heat source or expose them to direct flame or heat. Neither
should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of
corrosive liquids, fire, electrical shock, explosion or serious injury.
z Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury
due to an explosion. Immediately flush with water any area of the body, including the eyes and mouth,
skin, or clothing that comes into contact with the inner contents of a battery. If the eyes or mouth contact
these substances, immediately flush with water and seek medical assistance.
z Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It
could lead to leakage and injury.
z Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead
to overheating, burns and other injuries.
8
Read This First
z Before you discard a battery, cover the terminals with tape or other insulators to prevent direct
contact with other objects. Contact with the metallic components of other materials in waste
containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available
in your area.
z Use only recommended batteries and accessories. Use of batteries not expressly recommended for
this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
z If using AA-size NiMH batteries, use only Canon AA-size NiMH batteries and the charger
recommended for use with these batteries. Use of another charger may cause batteries to overheat
or deform, posing risk of fire or electric shock.
z Disconnect the battery charger or compact power adapter from both the camera and power
outlet after recharging and when the camera is not in use to avoid fires and other hazards.
Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
z The camera terminal of the compact power adapter is designed for exclusive use with your
camera. Do not use it with other products or batteries. There is a risk of fire and other hazards.
z Exercise due caution when screwing on the separately sold wide converter, tele-converter,
close-up lens and conversion lens adapter. If they loosen, fall off and shatter, the glass shards may
cause an injury.
Caution about magnetic fields

Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the
camera (p. 12). Such items may lose data or stop working.
9
Read This First
CAUTIONS
z Avoid using, placing or storing the equipment in places subject to strong sunlight or high
temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat
may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High
temperatures may also cause deformation of the casing. Ensure that there is good ventilation when
using the battery charger to charge the batteries.
z Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire,
electrical shock or other damage.
z Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to
injury or damage the equipment when wearing or holding it by the strap.
z Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be
damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several
pictures in rapid succession. Either action could result in burns.
z Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up
could damage the flash.
z Ensure that the battery charger or compact power adapter is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery charger varies according to
region.
z Do not use the battery charger or compact power adapter if the cable or plug is damaged, or if
the plug is not fully inserted into the power outlet.
z Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.
z If your camera is used for prolonged periods, the camera body may become warm. Please take
care when operating the camera for an extended period as your hands may experience a burning
sensation.
10
Read This First
Preventing Malfunctions
Avoid Strong Magnetic Fields

Never place the camera in close proximity to electric motors or other equipment generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems

Moving the equipment rapidly between hot and cold temperatures may cause condensation (water
droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an
airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from
the bag.
If Condensation Forms Inside the Camera

Stop using the camera immediately if you detect condensation.
Continued use may damage the equipment. Remove the memory card, batteries, and compact power
adapter from the camera and store it at room temperature until the moisture evaporates completely before
resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the batteries from the camera or battery
charger and store the equipment in a safe place. Storing the camera for extended periods with batteries
installed may cause battery leakage and damage the camera. (Do not remove the date battery.)
11
Components Guide
Shooting Mode Dial (p. 14) Power Button (p. 30)
Speaker AF-assist Beam (p. 36)
Power Lamp (p. 14) Red-eye Reduction Lamp (p. 43)
Shutter Button (p. 33) Self-timer Lamp (p. 45)
Zoom Lever (p. 33, Viewfinder Window (p. 35)
47, 59, 61)
Flash (p. 42)
Microphone A/V (Audio/Video) Out Terminal
(p. 114)
Ring
DIGITAL Terminal (p. 109)
Ring Release Button
DC IN Terminal (p. 131)
Lens Terminal Cover
The following cables are used to connect the camera to a computer or printer.
Computer (p. 106)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (sold separately)
• Compact Photo Printers (SELPHY CP series), Card Photo Printers: Interface Cable IFC-400PCU (supplied with
the camera), or the Direct Interface Cable DIF-100 (supplied with the printer).
• Bubble Jet Printers (PIXMA series/SELPHY DS series)
- Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide.
- PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera).
• PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera).
Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print
compatible printer information.
12
Components Guide
SET Button (Flash)/ Button (p. 42)

Mode Switch (p. 32) Strap Mount Attaching the
Viewfinder (p. 35) wrist strap*1
Preparing the Camera, Basic Function

Indicators (p. 14)
Button
LCD Monitor*2 (p. 24) Button
(Macro)/ MF (Manual Focus)/

(Print/Share) Button Button (p. 44, 91)
(p. 98, 111)
Battery Cover (p. 15)
Tripod Socket
Battery Cover Lock (p. 15)
MENU Button (p. 67)
Memory Card Slot Cover (p. 18)
FUNC. (Function)/ (Single Image
Erase) Button (p. 65, 66) DISP. (Display) Button (p. 24, 27)
The following operations are accessible through one easy press of the (Print/Share) button.
• Printing: See the Direct Print User Guide (separate from this guide)
• Downloading images (Windows only): See page 106 of this guide and the Software Starter Guide (separate
from this guide)
The indicator blinks or lights during a printer or computert connection.
Blue: Ready to print/Ready to transfer images
Blinking Blue: Printing/Transferring (p. 111)
*1 When carrying the camera by the strap, be careful not to swing the camera or catch it on other items.
*2 The LCD monitor is covered with a thin plastic sheet for protection against scratches during shipment. Remove it
before using the camera.
13
Components Guide
Shooting Mode Dial Indicators

Creative Use the shooting mode The indicators light or blink when the Power button
Zone dial to switch between or the shutter button is pressed.
the Shooting modes.
Upper Indicator
z : Auto (p. 33) Green: Ready to shoot
Auto
Blinking Green: Recording to memory card/
The camera
Reading memory card/Erasing from memory
automatically selects
settings. card/Transmitting data (during a computer
connection)
Image Zone Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake
z Image Zone warning)/Flash is charging
The camera automatically selects settings
according to the image composition type. Lower Indicator
: Portrait (p. 38) : Landscape (p. 38) Yellow: Macro mode/Manual Focus mode/AF Lock
: Night Scene (p. 38) : Fast Shutter (p. 38) Blinking Yellow: Focusing difficulty (although you
: Slow Shutter (p. 38) can press the shutter button, you are
: Special Scene (p. 38, 51) recommended to shoot using the focus lock
: Stitch Assist (p. 38, 49) : Movie (p. 56) (p. 90))
z Creative Zone Power Lamp
The user selects exposure, aperture or other Green: Power is on
settings to achieve special effects.
: Program AE (p. 77)
: Shutter-speed priority AE (p. 77)
: Aperture-priority AE (p. 79)
: Manual Exposure (p. 80)
14
Preparing the Camera
Installing the Batteries When the upper indicator blinks green, do not
Insert two AA-size alkaline batteries (supplied with turn off the power or open the battery cover.
the camera) or separately sold nickel metal hydride The camera is writing, reading, erasing or
transmitting an image to or from the memory

(NiMH) batteries.
card.
1 Be sure that the camera power is
off. z The use of the separately sold AC Adapter
Kit ACK800 is recommended to power the
2 Slide the battery camera during long usage sessions
cover lock in the (p. 131).
z The separately sold battery charger kit lets
direction of the you use rechargeable NiMH batteries to
arrow, and open power the camera (p. 129).
the cover. z See Battery Performance (p. 144).
z For information about the Battery and
3 Insert the batteries Charger Kit and AA-size rechargeable
NiMH batteries, see the System Map
as shown. (separate from this guide).
Negative end (–)
Positive end (+)
4 Close the battery cover.

15
Proper Battery Handling z Be careful to load the batteries with their

positive (+) and negative (–) ends in the right
z Use AA-size alkaline or Canon AA-size NiMH direction.
batteries (sold separately) only. For information z Never mix batteries of different types or from
on handling the AA-size rechargeable NiMH different manufacturers. Both batteries
batteries, see Using Rechargeable Batteries should be identical.
(p. 129). z Before inserting the batteries, wipe the battery
z Since the performance of alkaline batteries terminals well with a dry cloth. Oil from one’s skin
may differ according to brand, the operating or other dirt may cause a considerable reduction
time of the batteries you purchase may not be in the number of recordable images or reduced
as long as the batteries that came with the usage time.
camera. z Battery performance deteriorates at low
z Camera operating time may shorten at low temperatures (especially with alkaline batteries). If
temperatures when alkaline batteries are used. you are using the camera in cold areas and
Also due to their specifications, alkaline batteries batteries are running down faster than they
may expire faster than NiMH batteries. If you are should, you may be able to restore performance
using the camera in cold areas or for a long time, by placing batteries in an inner pocket to warm
we recommend using Canon AA-size NiMH them up prior to use. But be careful that you don’t
Battery Kit (a four-piece set). put the batteries into a pocket together with a
z While it is possible to use AA-size nickel- metal key chain or other metallic objects, as these
cadmium batteries, performance is unreliable objects may cause batteries to short-circuit.
and their use is not recommended. z If you do not plan to use the camera for a long
z Never mix unused and partially used time, remove the batteries from the camera and
batteries. Always load two fresh (or fully store them in a safe place. Batteries may leak
recharged) batteries at the same time. The and damage the camera if left installed during
partially used batteries may leak. prolonged periods of non-use.
16
Battery Status Indications

WARNING
Never use damaged batteries or batteries whose The LCD monitor displays an icon or message to
outer seal is completely or partially missing or let you know when batteries are low or depleted.

peeled off, as there is risk that such batteries may Batteries are beginning to run low.
leak, overheat, or burst. Always check the seals Replace or recharge the batteries if
on store-bought batteries before loading them, as you wish to continue using the
some batteries may come with defective seals. camera. If the LCD monitor is off, this
Do not use batteries with defective seals. icon will appear when you press any of
the following buttons: DISP., or /
Never use batteries that look like this. MF button.
Batteries with all or part of the seal
(electrical insulation sheath) peeled off. Batteries are fully depleted and the
Change the camera can no longer operate. You
batteries should replace the batteries
immediately.
The positive electrode (plus terminal) is
flat.
The negative terminal is correctly

formed (protruding from the metal
base), but the seal does not extend up
over the edge of the metal base.
17
Installing the Memory Card To remove the memory card

Push the memory card until it clicks and then
release it.
1 Be sure that the camera is turned
off.
2 Slide the memory
card slot cover in
the direction of the
arrow, and open it.
4 Close the memory card slot cover
securely.
3 Insert the memory card.
z Push the memory card in until it clicks into
place.
z Do not touch or allow metal objects to contact
the terminals on the back of the memory card.
18
Formatting Memory Cards

z When the upper indicator blinks green, the
camera is writing, reading, erasing or You should always format a new memory card or
transmitting an image to or from the one from which you wish to erase all images and
memory card. Do not perform the following

other data.
or image data may be lost or corrupted:
• Subject the camera body to vibration or
shocks. Please note that formatting (initializing) a
• Turn the camera’s power off, or open the memory card erases all data, including
memory card slot cover. protected images and other data types.
z Please note that memory cards formatted Please check the contents of the memory
with other manufacturers’ cameras or a card before formatting it.
computer, or formatted or edited with
application programs, may slow down
writing to the memory card or may not
operate correctly in the camera.
1 Turn the power on (p. 30).
z You are recommended to use memory
cards that have been formatted in your
2 Press the MENU
camera (See Formatting Memory Cards button and select
(p. 19)). The card supplied with the camera the [ (Set up)]
may be used without further formatting. menu using the
button.
See Memory Cards and Estimated Capacities
(Recordable Images) (p. 145).
19
3 Select (Format) z If the camera does not work properly, the

using the or inserted memory card may be
button and press malfunctioning. Reformatting the memory
the SET button. card may solve the problem.
z When a non-Canon brand memory card is
malfunctioning, reformatting it may solve
4 Select [OK] using the problem.
z Memory cards formatted in another camera,
the or button computer or peripheral device may not
and press the SET operate correctly. When that happens,
button. reformat the memory card with this camera.
If formatting in the camera does not work
z To cancel formatting properly, turn the camera off and reinsert
instead, select [Cancel] the memory card. Then turn the camera
and press the SET button. back on and format again.
z The capacity of the memory card displayed on
the LCD monitor when formatting is less than
the rated capacity of the memory card. This is
not a malfunction of the memory card or
camera.
5 Press the MENU button.
20
Memory Card Handling Precautions different temperature zone and allow it to adjust
slowly to the new temperature.
z Memory cards are high-precision electronic z If condensation forms on the memory card, store
devices. Do not bend them, apply force to them, it at room temperature until the water droplets

or subject them to shocks or vibration. have evaporated naturally.
z Do not attempt to disassemble or alter the z Do not use or store memory cards in the
memory card. following locations.
z Do not allow dirt, water or foreign objects to • Locations subject to dust or sand
contact the terminals on the back of the card. Do • Locations subject to high humidity and high
not touch the terminals with your hands or metal temperatures
objects.
z Do not peel away the original label on the
memory card or cover it with another label or
sticker.
z When writing on the memory card, use a soft
point pen (e.g. felt-tip pen). Using a sharp point
pen (e.g. ball-point pen) or pencil may damage
the memory card or corrupt the recorded data.
z Since some or all of the data recorded on the
memory card may be corrupted or erased by
electrical noise, static electricity or card
malfunction, making a backup copy of important
data is recommended.
z Moving a memory card rapidly between
temperature extremes will cause condensation to
form in the card and lead to a malfunction. To
avoid condensation, place the memory card in a
sealed plastic bag before moving it into a
21
Setting the Date/Time 4 Set the date and

The Set Date/Time menu will appear the first time
time.
the camera power is turned on, or whenever the z Press the or button
lithium date battery charge is low. Start from to select the item you
Step 4 to set the date and time. wish to set.
z Press the or button
1 Turn the power on (p. 30). to change its value.
z The date can be set up to the year 2030.
2 Press the MENU
button and select 5 Press the SET button.
the [ (Set up)] 6 Press the MENU button.
menu using the
button. z For embedding the date on the image data,
refer to page 55.
z To set the camera so that the date and time
will not appear on the image when it is
being shot but only when it is printed, see
Setting the Print Style (p. 103), the Direct
3 Press the or Print User Guide or the Software Starter
Guide supplied with the camera.
button to select
(Date/Time), and
Replacing the Date Battery (p. 137)
then press the SET
button.
22
Setting the Language 4 Select a language

Use this feature to select the language for the LCD
using the , ,
monitor display. or button and
press the SET

1 Turn the power on (p. 30). button.
2 Press the MENU z The Set up menu will
reappear without changing the language
button and select setting if you press the MENU button instead of
the [ (Set up)] the SET button.
menu using the
button. 5 Press the MENU button.
Shortcut Operation
The Language menu can also be displayed in
Playback mode by holding down the SET
button and pressing the MENU button. (This
function cannot be used while an image is
3 Select magnified or a movie clip is played back, or
when a printer is connected to the camera.)
(Language)
using the or
button and press
the SET button.
23
Using the LCD Monitor

The LCD monitor can be used to compose images while shooting, adjust menu settings and
play back recorded images. Pressing the DISP. button switches the LCD monitor display
mode.
Shooting Mode
DISP. Button
Standard Detailed
(No Information) (Information View) AF Frame
Spot AE
Point
Frame
Aperture Value
• Still images: Shots Remaining
Shutter Speed • Movies (seconds):
- Remaining Movie Time
DISP. Button DISP. Button - Elapsed Time
Off
When the shutter button is pressed halfway, the AF frame will display as follows (when the LCD monitor is
on).
AiAF set to [On] (p. 81) AiAF set to [Off] (p. 81) (1-point AF)
z Green: Focusing complete (focused AF frame) z Green: Focusing complete
z Does not appear: Focusing difficulty z Yellow: Focusing difficulty
24
Icons Displayed in Shooting Mode PowerShot A520:

5.7x 7.1x 8.9x 11x 14x Digital Zoom
p. 47
Shooting Mode p. 38, 76 PowerShot A510: Setting*2
5.1x 6.4x 8.0x 9.8x 13x

Exposure Camera Shake
p. 83 p. 26
Compensation Warning
White Balance p. 84 Low Battery p. 17
Drive Mode p. 45, 48 *1: Each mode of the SCN mode icon appears (p. 51).
*2: Zoom powers reflect the combined optical and digital
ISO Speed p. 87 zoom effects. These figures appear when the digital
Photo Effect p. 88 zoom is activated.
Metering Mode p. 82 z When a Shooting mode setting is changed, the
settings appear on the LCD monitor for about 6
Compression p. 40 seconds even if the LCD monitor is set to
Resolution Standard (No Information) or Off. (The Shooting
p. 40, 54
Postcard Print mode settings may not appear depending on the
Flash p. 42 camera setting.)
z and the icons in (the shaded area of
Red-eye Reduction p. 43 the chart) appear even when the information
Macro Mode p. 44 view is turned off.
Manual Focus p. 91 z In addition to the above, the AF frame, spot
metering frame, shutter speed, aperture value,
Auto Rotate recordable images or recordable movie time are
p. 92
Function
displayed as in the example on page 24.
Movie Recording z Setting the shooting mode dial to or
z(Red) p. 56
Mode modes turns the LCD monitor on regardless of
whether it is set to on or off.
25
z A slow shutter speed has likely been selected

because of insufficient lighting if the upper
indicator blinks orange after the metering
preparations are complete and the camera shake
icon ( ) displays in the LCD monitor. Set the
flash to or , or affix the camera to a tripod
to shoot.
z After you shoot an image by fully pressing the
shutter button, the image displays on the LCD
monitor for approximately three seconds (if the
review duration is changed, the image is
displayed for the selected number of seconds; or
if the hold function is activated, the image is
displayed until the shutter button is pressed
again) (p. 36). Keeping the shutter button fully
pressed after shooting, or pressing the SET
button while the image is displayed will also
continue to display the image.
26
Playback Mode
Standard
File Number

DISP. Button DISP. Button
Histogram
No Display Shooting Detailed*
Date/Time
Displayed image Total number
number of images Aperture Value
Shutter Speed
DISP. Button
Movie Length
Compression p. 40 * Detailed Display is not available

in Index Playback (9 images).
Resolution (Still image) p. 40
Sound memo (WAVE file) p. 95
Movie p. 56
Protection Status p. 97
27
Icons Displayed in Playback Mode The following information may also appear with
(Detailed Display) some images.
An audio file other than a WAVE file, or a file
*1 Shooting Mode p. 38, 76 with unrecognized format, is attached.
JPEG image not conforming to Design rule for
Exposure Camera File System Standards.
p. 83
Compensation
RAW image.
White Balance p. 84
Unrecognized data type.
Photo Effect p. 88
ISO Speed p. 87
z The on/off setting of the LCD monitor
Flash p. 42
display mode is memorized when the
Macro Mode p. 44 camera is turned off. When the camera is
Manual Focus p. 91 turned on again it assumes the last mode.
However, when the LCD monitor is turned
Metering Mode p. 82 on and the “Change the batteries” message
Resolution (Movies) p. 40 appears, the LCD monitor may not
*2 Low Battery p. 17 automatically turn on the next time the
camera is started.
In addition to the above, the shutter speed, z While a recorded image is displayed on the
aperture value, histogram and recorded movie time LCD monitor, you can check the exposure
are displayed as in the example in the figure on with the graph (see About the Histogram
page 27. (p. 29)) that shows the distribution of the
*1: Each mode of the SCN mode icon appears (p. 51). brightness data. If the exposure requires
*2: appears even in No Display mode. adjustment, set the exposure compensation
and re-shoot. (Press the DISP. button if the
histogram and other information are not
shown.)
28
z Please note that image information

recorded by this camera may not display
correctly on other cameras and image
information recorded by other cameras may

not display correctly on this camera.
About the Histogram
z The histogram is a graph that allows you to
judge the brightness of the shot image. The
greater the bias toward the left in the graph,
the darker the image. The greater the bias
toward to the right, the brighter the image. If
the image is too dark, adjust the exposure
compensation to a positive value. Similarly,
adjust the exposure compensation to a
negative value if the image is too bright
(p. 83).
Sample Histograms
Dark image Balanced Bright

image image
29
Basic Functions
Turning the Power On/Off Turning the Camera Off
Turning the Camera On 1 Press the Power button again to

turn the power off.
1 Press the Power button until the
power lamp lights green (p. 14). z You will hear a start-up sound and see the
start-up image when the power is turned on.
(To change the start-up sound and image,
Shooting Mode see pages 71, 74 and 117.)
z Current shooting settings will appear in the LCD z The start-up image does not appear when
monitor. the LCD monitor is Off in Shooting mode or
the A/V OUT terminal is connected to a TV.
Current shooting settings will disappear in Turning on the camera without the start-up
approximately 6 seconds when the LCD sound
monitor is set to Standard (No Information) or z Hold the MENU button while pressing the
Off (p. 24). Power button. This will set the [Mute]
setting to [On] and silence the operation
sound and the shutter sound. This is
Playback Mode convenient when you wish to shoot silently.
However, the warning signal beeps even
z The LCD monitor displays an image.
when the [Mute] setting is [On].
30
Basic Functions
Power Saving Function z Display Off (only in shooting mode)

The LCD monitor automatically shuts off
This camera is equipped with a power saving approximately 1 minute* after the last time a
function. Depending on the power saving setting, camera control is accessed.

the camera may power down or the LCD monitor * This time can be changed (p. 72).
may go off automatically.
When the Display Off Function Activates
z Auto Power Down The LCD monitor display turns back on by
[On]: Shooting mode: pressing any button other than the Power button,
Powers down approximately 3 minutes or by altering the vertical or horizontal orientation
after the last time a camera control is of the camera.
accessed.
Playback mode:
The power saving function will not activate
Powers down approximately 5 minutes
during Auto Play or during a computer
after the last time a camera control is connection (p. 96, 106).
accessed.
Connected to a Printer: .
Powers down approximately 5 minutes
after the last time a camera control is
accessed.
When the Auto Power Down Function
Activates
Pressing the Power button again will restore
power.
[Off]: The power saving function does not
activate.
31
Basic Functions
Switching between Shooting and Shooting Mode

Playback z Slide the mode switch to .
Playback Mode
You can quickly switch between Shooting z Slide the mode switch to .
mode and Playback mode. This is convenient • When a printer (sold separately) is connected,
when you wish to shoot again after checking images can be printed (see the Direct Print
or erasing an image immediately after it is User Guide).
shot. • When the camera is connected to a computer,
recorded images can be downloaded to and
viewed with a computer (p. 106).
Shooting Mode When a printer (sold separately) is properly

connected, the , or icon appears on
the LCD monitor.
Playback Mode
The lens does not
retract for
approximately 1
minute after the
camera switches to
Playback mode.
32
Shooting – The Basics
See Functions Available in Each Shooting Mode 4 Use the zoom lever to achieve the
(p. 159) at the end of this manual to find out which desired composition (relative
settings can be changed in which Shooting subject size in the viewfinder).
modes.
Auto Mode
The Basics
Mode Dial : Decreases the size
of the subject (Wide
In this mode, all you have to do is press the angle)
shutter button and let the camera do
everything else. : Magnifies the size of the subject
(Telephoto)
1 Check that the camera is in
z The angle of view can be adjusted within the
Shooting mode (p. 32).
35 to 140 mm range, in 35mm film equivalent.
2 Turn the shooting mode dial to z When the LCD monitor is on, the combined
use of the digital zoom and optical zoom
. enables magnified shooting up to the following
3 Aim the camera at the subject you magnification (Digital Zoom (p. 47)).
PowerShot A520: approx. 14x
wish to shoot. PowerShot A510: approx. 13x
5 Press the shutter button halfway.
z The shutter button has a two-stage action.
33
Pressing Halfway
z See page 159 for settings that can be
Pressing halfway changed in this mode.
automatically sets the z With the Review function, you can change
exposure and focus. the length of time images show on the LCD
z Two beeps will sound monitor after shooting, or set it so they do
when the camera has not show at all (p. 36).
finished metering, and the upper indicator z If the indicator blinks orange or yellow while
will light green or orange. If the LCD monitor you press the shutter button halfway, you
is on, the AF frame will appear green. can still press fully to take the shot.
z The lower indicator will blink yellow and the z Images are first saved into the camera’s
beep will sound one time if the subject is internal memory before being recorded onto
difficult to focus on. the memory card, allowing the next images
to be taken immediately as long as
6 Press the shutter sufficient space is available in the internal
memory.
button all the way. z The beep and shutter sound can be set [On/
Pressing Fully Off] in the [Set up] menu (p. 70).
z Even when the shutter sound is set to [ ,
Pressing fully releases the , (On)] (p. 74), no sound will be
shutter. heard if [Mute] is set to [On].
z You will hear the shutter sound when the z There is no shutter sound in movie mode.
shot is complete. Do not move the camera z Shots cannot be taken while the flash is
until you hear this sound. charging.
z The upper indicator blinks green while data
is recorded onto the memory card.
z The picture appears for approximately three
seconds on the LCD monitor, if it is on.
34
Shooting with the Viewfinder

About the Autofocus Function
You can save power by turning the LCD monitor off This camera employs AiAF (artificial
(p. 24) and using the viewfinder to shoot. intelligence autofocus) technology, which
uses a broad metering field to calculate the
1 Compose the image so that the focal distance with high precision. It delivers a
crisp focus even when the photographic
subject appears in the center of subject is slightly off-center.
the frame in the viewfinder
The Basics
Image Seen in Viewfinder vs. Recorded
(autofocus range). Image
When shooting an image, a larger range than
Viewfinder window the one visible in the viewfinder usually gets
recorded. You can confirm the actual range
that will be recorded in the LCD monitor. In
addition, due to the viewfinder’s specification,
the range visible in the viewfinder may
actually differ from the actual recorded image.
The closer the subject is to the lens, the more
Shows approximate noticeable the difference will be. In some
center of the image cases, portions of images shot up close that
appear in the viewfinder will not appear in the
recorded image. You are recommended to
use the LCD monitor during macro
photography (p. 44).
35
AF-assist Beam Reviewing an Image Right after

z The AF-assist beam will sometimes emit Shooting
when the shutter button is pressed halfway
to assist focusing in certain conditions, i.e. Mode Dial
dark conditions.
z The AF-assist beam can be turned off Right after a shot is taken, the image displays
(p. 69). on the LCD monitor for approximately 3
For example, if animals are your subject, seconds (the duration of display can be
turn off the beam when shooting in the dark changed.) In addition, the image will keep on
to avoid startling them.
However, please keep in mind the following displaying regardless of the review duration
facts. setting by performing one of the following
- If the AF-assist beam is turned off, it may operations.
become more difficult for the camera to
focus in dark conditions. z Keeping the shutter button fully pressed
- The red-eye reduction lamp may emit z Pressing the SET button while the image is
when you press the shutter button halfway displayed*
even if the AF-assist beam is turned off. Press the shutter button halfway again to stop
z In order to prevent any lamp from emitting displaying it so that you can shoot the next image.
before the flash fires, set both the red-eye
reduction function and the AF-assist beam
to [Off] in the Shooting menu. You can perform the following while images
are displayed.*
z Erase the image (p. 65).
z Display the image’s information (p. 27).
z Magnify the image (p. 59) (When pressing
the SET button while the image is
displayed.)
* Not available in (Stitch Assist) mode.
36
Changing the Image Display z Another shot can be taken by pressing the
Duration shutter button even while an image is
displayed.
The image review time can be set to [Off], any time
in the range of 3 to 10 seconds, or [Hold].
z The [
The Basics
(Rec.)] menu appears.
2 Select (Review)
using the or
button.
3 Select a duration
setting using the
or button and press the
MENU button.
z With the [Off] option, the image will not display.
z With the [3 sec.] to [10 sec.] options, the image
will appear for the time selected even if you
release the shutter button.
z If [Hold] is selected, the image will keep on
displaying until the next time the shutter button
is pressed.
37
Using the Mode Dial (Image Zone)

Settings fitting the shooting conditions of your subject can easily be set using the shooting
mode dial.
Portrait Movie Stitch Assist Special Scene
Use this mode to shoot
movies. Sound is also
recorded simultaneously
(p. 56).
Use this mode when taking Select from 8 scene

Use this mode when you shots that you want to modes to shoot with the
want the subject to appear combine into a panorama most appropriate settings
sharp and the background (p. 49). for the scene (p. 51).
to blur.
Landscape Night Scene Fast Shutter Slow Shutter
Use this mode to shoot Use this mode to capture human Use this mode to shoot Use this mode to shoot
subjects against the backdrop of an moving objects to make
landscape scenes. evening sky or night scene. The flash is fast moving objects.
directed at the person and the shutter them appear blurred, such
speed is slow, so both the person and as river rapids.
the background can be beautifully shot.
38
1 Turn the shooting Landscape Mode

mode dial and set • The icon (camera shake warning) may
the icon of the appear on the LCD monitor since slower
shutter speeds are frequently used in this
mode you wish to mode. If this happens, affix the camera to a
use to . tripod.
z Shooting procedures are Night Scene Mode
The Basics
the same as for the mode (p. 33). • The shutter speed slows down. Even if you
use the flash, tell your subjects not to move
for a few moments.
and Shooting Modes • If the Night Scene mode is used to shoot
Always use a tripod to prevent camera shake. mid-day shots, the same effects as with the
mode can be obtained.
Fast Shutter
z See page 159 for settings that can be • Noise in the recorded image may increase
changed in each mode. if you shoot in dark conditions.
z Tips for each function:
Portrait Mode
• You can achieve a better blurring effect of
the background by making sure the upper
half of your subject fills the entire LCD
monitor or viewfinder.
• You can enhance the blurring effect of the
background even more by setting the lens
to its telephoto end setting.
39
Changing the Resolution and or z The resolution is set to M1 (1600 x 1200) and the
(Postcard compression is set to (Fine).
Compression Print Mode) z See page 54 for Postcard Print mode information.
* Paper sizes vary according to region.
Mode Dial * *
* The Postcard Print mode is not available in and . Compression Purpose
You can change the resolution and Superfine High Quality Shoot higher quality
compression (excluding movies) depending images
on the purpose. Shoot normal quality
Fine
images
Resolution Purpose Normal Shoot more images
Normal
z Print larger than A4 size*
High 210 x 297 mm (8.3 x
PowerShot A520: 11.7 in.) prints Movies can be shot with the following resolutions.
2272 x 1704 pixels z Print larger than Letter
size* 216 x 279 mm (8.5 x Resolution
L 11 in.) prints
(Large) z Print up to A4 size* 210 x 640 x 480 pixels
297 mm (8.3 x 11.7 in.) 320 x 240 pixels
PowerShot A510: prints
2048 x 1536 pixels z Print up to Letter size* 216 160 x 120 pixels
x 279 mm (8.5 x 11 in.)
prints
z Print postcard size 148 x
M1
(Medium 1)
1600 x 1200 pixels
z
100 mm (6 x 4 in.) prints
Print L size 119 x 89 mm
1 Press the FUNC. button.
(4.7 x 3.5 in.) prints
M2 z Print card size 86 x 54 mm
1024 x 768 pixels
(Medium 2) (3.4 x 2.1 in.) prints
z Send images as e-mail
S Low
640 x 480 pixels attachments
(Small)
z Shoot more images
40
2 Select L* using 5 Select the

the or button. compression you
* The current setting is wish to set using
displayed. the or button.
z You can shoot the image right after selecting
Example: settings by pressing the shutter button. This
The Basics
PowerShot A510 screen will appear again, once the image is
shot.
3 Select the Excluding
resolution you
wish to set using
z Image Data Size (Estimated) (p. 146)
the or button. z Memory Cards and Estimated Capacities
(Recordable Images) (p. 145)
Number of
recordable images
(Only displayed
when the resolution
or compression is
selected)
4 Press the SET button.
41
Using the Flash z You can switch between settings by pressing

the button.
Mode Dial *
When the red-eye reduction function is on
* In (Fireworks), the flash is prohibited.
Use the flash according to the guidelines below.
The flash fires automatically as
Auto with required by the lighting level, When the red-eye reduction function is off
red-eye and the red-eye reduction lamp
reduction fires each time the main flash
fires.
The flash fires automatically as z This operation may not work in certain
Auto required by the lighting level. Shooting modes (p. 159).
Flash on with
red-eye
The red-eye reduction lamp and 2 Shoot the image.
the flash always fire. z The flash will fire if the upper indicator lights
reduction
orange when the shutter button is pressed
Flash on The flash always fires. halfway. (Does not fire in .)
Flash off The flash does not fire. z Shooting procedures are the same as for the
mode (p. 33).
1 Press the button
to switch between When shooting with a high ISO sensitivity and
flash modes. using the flash, there is more of a chance of
z The selected flash mode overexposure the closer you are to the
appears on the LCD subject.
monitor.
42
z When shooting in any mode other than M z The flash setting is saved when the camera
mode, the flash fires with automatic is turned off in the P, Tv, Av and M
adjustments. Shooting modes.
z The flash fires twice. A pre-flash will fire and
will be followed by the main flash. The pre-
flash is used by the camera to obtain the Setting the Red-eye Reduction
subject’s exposure data so that the main Function
The Basics
flash can be set to the optimal intensity for
the shot. The red-eye reduction lamp fires when the flash is
z In M mode, the [Flash Output] option can be used in dark areas. This reduces light reflecting
changed and the flash fires with the back from the eyes and making them appear red.
manually set adjustments (p. 89).
z The fastest shutter speed for flash 1 In the [ (Rec.)]
synchronization is 1/500 second. The menu, set (Red-
camera automatically resets the shutter
speed to 1/500 second if a faster speed is eye) to [On].
selected. z appears on the LCD
z Shots cannot be taken while the flash is monitor.
charging.
z The flash may take approximately 15
seconds to charge in some cases. The LCD
monitor, if it is on, will go off when the
indicator blinks orange while charging. The
LCD monitor will comeback on after the
indicator lights orange when charging is
completed. The charging time will vary
depending on usage and remaining battery
power.
43
z Red-eye Reduction
Macro Mode
For this mode to be effective, the subject *
must be looking right at the red-eye Mode Dial
reduction lamp. Try asking them to look * Macro mode is not available in and .
directly at the lamp. Even better results can
be obtained by shooting with the lens set to Use the macro mode when the distance
a wide angle, increasing the lighting in between the lens and the subject is in the
indoor settings or approaching closer to the range of 5 to 45 cm (2.0 in. to 1.5 ft.) at wide
subject. angle end and 30 to 45 cm (11.8 in. to 1.5 ft.)
z The red-eye reduction function cannot be at telephoto end.
set when the Special Scene mode (p. 51) is
set to (Fireworks). Use to take close-up shots of flowers or small
objects.
1 Press the DISP. button to turn the
LCD monitor on.
2 Press the
button.
z The icon appears on
the LCD monitor.
z Pressing the button
again cancels the macro
mode.
3 Shoot the image.
44
z The lower indicator will light yellow when the Self-timer

shutter button is pressed halfway.
z Shooting procedures are the same as for the Mode Dial
Mode (p. 33). * The cannot be set in and modes.
z Always use the LCD monitor to compose 1 Press the FUNC.

images in macro mode. Shooting with the button and select
The Basics
viewfinder is possible, however, part of the
image may not appear in the actual shot *(Drive Mode)
(p. 35). using the or
z When the lens is zoomed out to the wide button.
angle end*1, the recordable area is approx.
* The current setting is
60 x 44 mm (2.4 x 1.7 in.), and at telephoto
displayed.
end*2, it is approx. 84 x 63 mm (3.3 x
2.5 in.).
When the zoom position is located between
2 Select , or using the or
the telephoto end and the wide angle end, button and press the FUNC.
the distance between the front of the lens button.
and the subject will be the same as the z When is selected, the shutter release will
telephoto end. be delayed for 10 seconds, and when is
z The exposure may not be optimal when the
flash is used in macro mode.
selected, the shutter release will be delayed for
2 seconds, after you press the shutter button
*1 Closest focal distance. all the way.
*2 Maximum optical telephoto setting.
45
z When is selected, pressing the SET button - When the self-timer is set between 2 to 10
will allow you to set the start time (0 to 10 sec., the self-timer will sound 2 seconds
seconds) and the number of shots (1 to 10 before the shutter activates.
shots). Select the setting item using the or z Shooting procedures are the same as for the
button and change its value using the or mode (p. 33).
button.
z You can change the self-timer sound by
3 Shoot the image. changing the setting in [Self-timer Sound] in
the [ (My Camera)] menu (p. 74).
z When is selected, the self-timer lamp starts
z When is selected and the number of
blinking when the shutter button is pressed all
[shot] is set to two or more,
the way. The self-timer sounds and the blinking - if the internal memory is full, the interval
gets faster two seconds before the shutter between shots may lengthen.
activates. - if the flash is to be used, the interval
z When is selected, the self-timer lamp blinks between shots will lengthen to
fast from the beginning. The shutter activates accommodate the flash recharge time.
in two seconds. z See Photo Tips and Information (p. 151).
z When is selected, the self-timer lamp will
blink during shots, and self-timer sounds will
sound as follows. If you set multiple shots to be
taken, the self-timer will sound only for the first
shot.
- The self-timer will not sound when set to [0
sec.].
- The self-timer will not sound when set to [1
sec.], but the beeps will sound.
46
Digital Zoom 4 Press the zoom lever toward .

z The lens will zoom to the maximum optical
Mode Dial telephoto setting and stop. Press the zoom
Images can be zoomed with the combined lever toward again to further zoom the
image digitally.
optical and digital zoom functions as follows.
PowerShot A520: z Press the lever toward to zoom back out.
Approx. 5.7x, 7.1x, 8.9x, 11x and 14x
The Basics
PowerShot A510:
Approx. 5.1x, 6.4x, 8.0x, 9.8x and 13x The combined
magnifications of the
1 Press the DISP. button to turn the optical zoom and digital
LCD monitor on. zoom are displayed.
2 In the [ (Rec.)] 5 Shoot the image.

menu, select z Shooting procedures are the same as for the
(Digital Zoom). mode (p. 33).
z See Selecting Menus and
Settings (p. 66). The digital zoom cannot be used when the
LCD monitor is off.
3 Select [On] using the or

z Images become coarser the more they are
button and press the MENU digitally zoomed.
button. z Since camera shake may become a factor
when using the digital zoom, the use of a
tripod is recommended.
47
Continuous Shooting 5 Press the shutter button all the

way to shoot.
Mode Dial z Shooting will stop when the shutter button is
Use this mode to shoot successive shots released.
while the shutter button is pressed.
z Continuous shooting speed is as follows*. z The interval between shots may lengthen
PowerShot A520: Approx. 1.9 shots per second somewhat when the internal memory
PowerShot A510: Approx. 2.3 shots per second becomes full.
* Large/Fine mode with LCD monitor off (These figures z The flash can be used, but the interval
reflect Canon’s testing standard. The figures will vary between shots will lengthen to
depending on the subject and shooting conditions.) accommodate the flash recharge time.

2 Select *(Drive
Mode) using the
or button.
displayed.
3 Select using the or button

and press the FUNC. button.
4 Press the shutter button halfway to
lock the focus.
48
Shooting Panoramic Images Framing a Subject

(Stitch Assist) The PhotoStitch program detects the overlapping
portions of adjoining images and merges them.
Mode Dial When shooting, try to include a distinctive item
Stitch Assist can be used to shoot (landmark) in the overlapping portions.
overlapping images that can later be merged
The Basics
(stitched) to create one panoramic image on
a computer.
z Compose each frame so that it overlaps 30

to 50% of the adjoining image. Try to keep
the vertical misalignment to within 10% of
the image height.
z Do not include moving items in the overlap.
z Do not try to stitch images that include both
distant and close items. Objects may
appear warped or doubled up.
z Make the brightness in each image
consistent. The final image will appear
unnatural if the difference in brightness is
To merge the images on a computer, use too great.
PhotoStitch, one of the supplied software
programs.
49
z To shoot landscapes, swivel (pan) the z You can also press the shutter button directly
camera around its own vertical axis. to shoot without pressing the SET button.
z To shoot close-ups, slide the camera over
the subject, keeping it parallel to the subject 3 Shoot the first image.
as you move it. z The exposure and white balance settings are
set and locked with the first image.
Shooting 4 Compose and

shoot the second
Images can be shot in the following 2 image so that it
sequences in Stitch Assist mode.
overlaps the first.
Left Right Left to right horizontally z Minor discrepancies in
Left Right Right to left horizontally the overlapping portions Sequence
can be corrected when
1 Turn the Shooting mode dial to the images are stitched
. together.
z The LCD monitor will turn on. z Use the or button to check or retake the
recorded images.
2 Select the
5 Use the same procedures to shoot
shooting sequence
using the or the remaining images.
z A maximum of 26 images can be recorded.
button and press
the SET button. 6 Press the SET button after the last
z The shooting sequence is shot.
set.
50
z A custom white balance setting (p. 85) cannot

Special Scene Mode
be set in mode. To use a custom white
balance setting, first set it in another Shooting Mode Dial
mode. By simply selecting one of the following 8
z The settings in place for the first image are modes, you can shoot the image with the
locked in and cannot be changed for
subsequent shots. most appropriate settings for the scene.
The Basics
z A TV cannot be used as the monitor for Appropriate for shooting images with
shooting in this mode. Foliage flowers, leaves or trees to enhance
color.
See page 159 for settings that can be Appropriate for shooting the subject
changed in this mode. against the backdrop of snowy
Snow
mountains while preventing dark
subjects and bluish backgrounds.
Appropriate for shooting scenes by
Beach the sea or on sunlit sandy beaches
while preventing dark subjects.
Appropriate for shooting fireworks
Fireworks
clearly with the optimal exposure.
Appropriate for shooting images with
the Waterproof Case WP-DC60
(sold separately). This mode uses an
optimal white balance setting to
Underwater
reduce bluish tones and record
images with natural hues. The flash
is controlled to fire as seldom as
possible.
51
Prevents camera shake and z For the shooting procedures of , see the
maintains the subject’s true color Waterproof Case User Guide included with the
when shooting under fluorescent or Waterproof Case WP-DC60 (sold separately).
Indoor
tungsten lighting. The exposure is
regulated so as to avoid the use of
flash as much as possible.
Allows you to capture subjects that
move around, such as children and
Kids & Pets
pets, without missing photo
opportunities.
Use this to take snapshots of people
Night against twilight or night backgrounds
Snapshot to reduce the effects of camera
shake even without using a tripod.
1 Turn the shooting mode dial to

(Special Scene mode).
z The current Scene mode screen is displayed.
2 Select the scene you wish to shoot
using the or button and shoot
the image.
z The name of the Scene mode is displayed for
approximately six seconds each time you
change the mode.
z Shooting procedures are the same as for the
mode (p. 33) excluding .
52
Foliage Snow Beach Fireworks
The Basics
Night Snapshot Kids & Pets Indoor Underwater
z In mode, the shutter speed slows down. Use a tripod to avoid camera shake.
z In , , and modes, the ISO speed may increase and cause noise in the image.
z In mode, shoot subjects in the following range: 1 to 5 m (3.3 to 16 ft.) (telephoto end) or 1 m (3.3 ft.)
– infinity (other zooming positions).
z See page 159 for settings that can be changed in this mode.
z In mode, using the LCD monitor is recommended.
z Results may vary depending on the subject.
z When shooting images underwater, always turn the power off before inserting the camera into the
Waterproof Case WP-DC60 (sold separately).
z In and modes, using the Waterproof Case WP-DC60 (sold separately) is recommended.
53
Postcard Print Mode z You can shoot the image right after selecting
settings by pressing the shutter button. The
Mode Dial menu displays again after the shot, allowing
you to change the settings easily.
You can shoot images with the optimal
resolution and compression for postcard size 4 Press the FUNC. button.
printing.
• When printing standard image data to postcard 5 Shoot the image.
size, sometimes the top and bottom sides may z When you press the
not get printed. shutter button halfway,
• By shooting images in the Postcard Print mode, you the area that will not get
can check the printing area (vertical/horizontal ratio printed (the top and
of 3:2) beforehand. In addition, the resolution locks bottom sides) grays out.
to M1 (1600 x 1200) and the compression locks to z Shooting procedures are
the (Fine) setting, rendering smaller data sizes. the same as for the mode (p. 33).
Selecting cancels the [On] setting of the
2 Select L* using digital zoom.
the or button.
* The current setting is z This setting is not available with certain
displayed. Shooting modes. Please refer to Functions
Available in Each Shooting Mode (p. 159).
z When [Date Stamp] (p. 55) is set to [Date]
3 Select or [Date & Time],
LCD monitor.
icon appears in the
(Postcard) using z For printing instructions, refer to the Direct
the or button. Print User Guide.
54
Embedding the Date in the Image z See Setting the Date/Time (p. 22).
Data z If you do not want to embed the date on image
data, select [Off].
You can embed the date on image data when
(Postcard Print mode) is selected. The date will 4 Press the MENU button.
be printed on your images even if it has not been
set with a computer or printer. 5 Shoot the image.
z Ensure that the camera’s date/time is set
The Basics
z Shooting procedures are the same as for the
beforehand (p. 22). mode (p. 33).
z You cannot embed the date on image data when
(Postcard Print mode) is not selected.
z The Date Stamp cannot be deleted from the
1 Check that appears on the LCD image data once it has been set.
z When using a Compact Photo printer
monitor. (SELPHY CP series) or Card Photo printer,
a portion of the date may not get printed if
2 Select (Date the credit card size print (54 mm x 86 mm
Stamp) in the (2.1 x 3.4 in)) is selected.
[ (Rec.)] menu.
Settings (p. 66).
3 Select [Off], [Date]
or [Date & Time]
using the or
button.
55
Movie Mode The maximum length of individual movie clips may

vary with the subject and shooting conditions.
Mode Dial Recording will automatically stop when the
maximum is reached or when the memory cards
Use this mode to shoot movies. The runs out of free capacity.
resolution can be set to [ (640 x 480)],
[ (320 x 240)] or [ (160 x 120)] (p. 40). z The recording time may not display properly
during shooting or filming may stop
1 Turn the shooting mode dial to . unexpectedly with the following types of
z The LCD monitor turns on and displays the memory cards.
maximum recording time (in seconds). - Slow recording cards
- Cards formatted on a different camera or a
2 Press the shutter button all the way. computer
z Shooting and sound recording starts - Cards which have had images recorded
simultaneously. and erased repeatedly
z During the shooting a red circle appears in the Although recording time may not display
properly during shooting, the movie will be
upper right of the LCD monitor. recorded correctly on the memory card.
3 Press the shutter button all the Recording time will display properly if you
format the memory card in this camera
way to stop recording the movie. (excluding slow recording memory cards).
z The maximum length of individual movie clips
is 30 seconds at the setting (10 frames/
second) and 3 minutes at the and
settings (15 frames/second).
* Recording times vary by the memory card. See
Memory Cards and Estimated Capacities
(Recordable Images) (p. 145).
56
z You are recommended to use a memory z See page 159 for settings that can be
card that has been formatted in your changed in this mode.
camera to shoot movies (p. 19). The card z Sound is recorded monaurally.
supplied with the camera may be used z There is no shutter sound in movie mode.
without further formatting. z QuickTime 3.0 or higher is required to
z Be careful not to touch the microphone playback movies (File type: AVI/
while shooting. Compression method: Motion JPEG) on a
z During shooting, do not press any button
The Basics
computer. (QuickTime (for Windows) is
other than the shutter button. These bundled on the supplied Canon Digital
operation sounds will also be recorded. Camera Solution Disk. On the Macintosh
z The AE, AF, white balance and zoom platform, QuickTime 3.0 or later is generally
settings are set and locked to the settings of bundled with Mac OS 8.5 or later operating
the first frame. system.)
z After a shot, the upper indicator blinks
green while the movie clip is being written to
the memory card. You cannot shoot again
until it stops blinking.
57
Playback – The Basics
Displaying Images Individually z Press the DISP. button to show the
(Single Image Playback) information of the displayed image (p. 27).
z Press the button to quickly delete the
You can view the recorded images on the displayed image (p. 65).
LCD monitor.
1 Slide the mode
switch to .
z The last recorded image
appears (single image
playback).
2 Move between images using the

or button.
z Use the button to move to the previous
image and the button to move to the next.
Holding the or button moves more
rapidly between the images, but the images
will not appear as clearly.
You may not be able to play back images that

have been shot with another camera or edited
on a computer with other software
applications.
58
Magnifying Images Canceling the Magnified Display

Images can be magnified up to approximately
10 times in single image playback. 1 Press the zoom lever toward .
z Pressing the MENU button cancels
1 Slide the mode switch to . magnification immediately.
2 Press the zoom lever toward .
The Basics
Movie frames and index playback images
cannot be magnified.
You can magnify an image while it is

displayed on the LCD monitor in Shooting
Approximate position mode immediately after the image is shot
(p. 36).
z You can move around the magnified image
using the , , or button.
z Pressing the SET button switches to image
advance mode. Press the or button to
display the preceding or next image at the
same level of magnification. (However,
keeping on pressing the or button cannot
switch the images more quickly.) Pressing the
SET button again cancels image advance
mode.
59
Viewing Images in Sets of 4 Press the zoom lever toward .

Nine (Index Playback) z Index playback cancels and the display reverts
to single image playback.
Up to 9 images can be viewed at once in
index playback. Press the DISP. button to show the
information for the displayed image (p. 27).
1 Slide the mode switch to .
2 Press the zoom lever toward .
z 9 images appear at once (index playback).
3 Change the image selection using
the , , or button.
Pressing the button in this row displays
the previous set of 9 images.
Selected Image
Movie Pressing the button in

this row displays the next
set of 9 images.
60
Jumping between Images Viewing/Editing Movies

The display can be advanced or set back 9 Viewing Movies
images in index playback.
You can playback the movies shot in mode.
1 Press the zoom lever toward
while in index playback (p. 60). 1 Slide the mode switch to .
The Basics
z The jump bar appears. z Movies cannot be viewed in index playback.
2 Change the image 2 Select a movie using the or

selection. button and press the SET button.
z Jump 9 images back or z A movie displays with the icon on it.
forward using the or z The movie playback panel appears.
button.
z Pressing the or 3 Select (Play)
button while holding the Jump Bar using the or
SET button displays the button and press
first set or last set of 9 images. the SET button.
3 Press the zoom lever toward . z The movie and sound will
play.
z The jump bar disappears and the camera Volume
returns to index playback. z You can adjust the
z If you press the zoom lever once more toward volume using the or
Movie Playback
, the camera returns to single image button.
Panel
playback.
61
z When a movie has finished playing, it will

display the last frame. You may experience frame dropping and audio
If the SET button is pressed in this state, the breakup when playing back a movie on a
computer with insufficient system resources.
camera will revert to the movie playback panel.
If the SET button is pressed again, the movie
will start playing from the first frame. z The volume at which movies play back can
Pausing and Resuming Play also be adjusted in the Set up menu (p. 71).
z If [Mute] (p. 70) is set to [On] in the Set up
z Press the SET button to pause the movie. Press menu, the volume setting returns to 0 but it
it again to resume. can be adjusted using the or button.
Fast Forwarding/Rewinding z Please adjust the audio sound level on the
TV when viewing movies on a TV.
z Select one of the following operations using the
or button and press the SET button.
(Exit) :Returns to single image Editing Movies
playback
(First Frame) :Displays the first frame You can delete unwanted portions at the beginning
(Previous Frame):Returns to the previous or end of a movie clip.
frame (Rewinds if the
SET button is held down)
1 Select the movie you wish to edit
(Next Frame) :Proceeds to the next and press the SET button.
frame (Fast forwards if z See Viewing Movies (p. 61).
the SET button is held
down) 2 Select (Edit) using the or
(Last Frame) :Displays the last frame button and press the SET button.
z The movie editing panel and the movie editing
bar appear.
62
3 Select an editing Movie Editing 6 Select (Save)

method using the Panel using the or
or button. button and press
z (Cut Beginning): the SET button.
Deletes frames from the z When is selected,
beginning of the movie. the edited movie is not
z (Cut End):
The Basics
saved and the camera reverts to the movie
Deletes frames from the playback panel.
end of the movie.
z (Exit): Movie Editing Bar 7 Select [Overwrite]
Reverts to the movie or [New File] using
playback panel. the or button
4 Select the range and press the SET
you wish to delete button.
using the or z [Overwrite]:
Saves the edited movie under the same name
button. as the original movie. The original data is
5 Select (Play) using the or deleted.
z [New File]:
button and press the SET button. Saves the edited movie under a new name.
z The temporarily edited movie will start playing. The original data is left unchanged.
z The movie will stop if you press the SET button z When there is not enough space left on the
while it is playing. memory card, only the overwrite function is
available. If this happens, a small appears
on the counter of the movie editing bar.
63
z Protected movies and movies with an

original length of less than one second
cannot be edited (p. 97).
z It may take approximately 3 minutes to save
an edited movie. If the battery runs out
partway through, edited movie clips cannot
be saved. When editing movies, it is
recommended to use new AA size alkaline
batteries or fully charged AA-size NiMH
batteries (sold separately), or the AC
Adapter Kit ACK800 (sold separately)
(p. 131).
Movies with an original length of 1 second or

more can be edited in 1-frame units.
64
Erasing
Please note that erased images cannot be Erasing All Images
recovered. Exercise adequate caution before
erasing an image.
1 In the [ (Play)]
menu, select
Erasing Images Individually (Erase all) and
press the SET
The Basics
1 Slide the mode switch to . button.
z A confirmation screen
2 Select the image appears.
you wish to erase
using the or
2 Select [OK] using the or
button and press the SET button.
button and press z To cancel instead of erasing, select [Cancel]
the button. and press the SET button.
z A confirmation screen
appears.
z The [Erase all] function erases all the image
3 Select [Erase] using the or data recorded on the memory card.
z Protected images cannot be erased with
button and press the SET button. this function (p. 97).
z To cancel instead of erasing, select [Cancel] z To erase the images and all other data
and press the SET button. recorded on the memory card, see
Formatting Memory Cards (p. 19).
Protected images cannot be erased with this
function (p. 97).
65
Shooting – Advanced Functions
Selecting Menus and Settings
Selecting Settings with the FUNC. Button (Shooting Mode Only)

3. Select a FUNC. menu item using the or button.
1. 4. Select the setting contents using the or button.
2. Exposure Compensation (±0) (p. 83)
Flash Output (p. 89)
Resolution ( ) (p. 40)
White Balance( ) (p. 84)

Example: PowerShot A510
1 Slide the mode switch to . Resolution (Movies) ( ) (p. 40)
2 Press the FUNC. button. Drive Mode ( ) (p. 45, 48)
3 Use the or button to Compression ( ) (p. 40)

select a FUNC. menu item. ISO Speed ( ) (p. 87)
4 Use the or button to

Photo Effect ( ) (p. 88)
Items in ( ) show default
settings.
select the setting contents.
5. 6.
Metering Mode ( ) (p. 82) Shoot the
6 Shoot the image. image
66
Selecting Settings with the MENU Button

2 Use the or button to switch between
menus.
z You can also switch between menus using the zoom lever.
3 Use the or button to select a menu item.
Shooting Mode Playback Mode 4 Use the or button to select the setting
Advanced Functions
contents.
Rec. Menu Play Menu Set up Menu My Camera Menu
z For items with [...] next to them, press the SET button and select the settings from the next displayed
menu. Once the settings are complete, press the SET button again to enable the new settings.
z In the Shooting mode, you can also close the menu by pressing the shutter button halfway.
67
z Some menu items may not be available for

selection according to the Shooting mode
(p. 159).
z You can apply a desired image and sound
to and in the My Camera menu. For
details, see the Registering My Camera
Settings (p. 118) or the Software Starter
Guide.
z The default of all the settings changed by
the menu and button operations except for
[Date/Time], [Language] and [Video
System] can be restored all at once (p. 75).
68
Menu Settings and Default Settings
Rec. Menu
Reference
Menu Item Setting Content
Page
Sets the camera so that it will either automatically select the AF frame and
AiAF shoot, or shoot with the AF frame fixed in the center. 81
• On*/Off
Sets whether or not the red-eye reduction lamp fires when the flash fires.
Red-eye 43
Advanced Functions
• On*/Off
Sets whether or not the focusing point is magnified when using the manual
MF-Point Zoom focus. 91
• On*/Off
Sets whether or not the AF-assist beam is activated as needed when using
AF-assist Beam the auto focus. 36
• On*/Off
Sets whether or not the digital zoom combines with the optical zoom to
Digital Zoom zoom images. 47
• On/Off*
Sets the duration images display on the LCD monitor after the shutter
Review button is released. 36
• Off/3* to 10 sec./Hold
Sets the date format to be embedded into the image data during Postcard
Date Stamp Print mode. 55
• Off*/Date/Date & Time
* Default setting
69
Play Menu
Reference
Page
Protect Protects images from accidental erasure. 97
Rotate Rotates images 90 or 270 degrees clockwise in the display. 94
Sound Memo Adds sound memos to images. 95
Erase All Erases all images from a memory card (excluding protected images). 65
Auto Play Plays images automatically one after the other. 96
Sets which images and how many copies will be printed on a printer with
Print Order 100
the direct print function or at a photo lab service.
Transfer Order Specifies images before downloading to a computer. 104
Set up Menu
Reference
Page
Set [On] to mute the start-up sound, operation sound, self-timer sound and
shutter sound all at once. For details, see How the [Mute] setting in the
[ (Set up)] menu and each sound setting in the [ (My Camera)] menu
are related on page 74.
Mute –
• On/Off *
Turning the power on while pressing the MENU button will set the [Mute]
setting to [On].
Note that the warning signal beeps even when the [Mute] setting is [On].
* Default setting
70
Reference
Page
Adjusts the volume of the start-up sound, operation sound, self-timer
sound, shutter sound, or playback sound after pressing the SET button.
The volume cannot be adjusted if [Mute] is set to [On]. –
• (OFF) • (2)* • (4)
• (1) • (3) • (5)
Start-up Vol.
30
Adjusts the Start-up Sound volume when the camera powers up.
Operation Vol.
Advanced Functions
Volume Adjusts the Operation Sound volume when any button except the shutter –
button is operated.
Selftimer Vol.
Adjusts the volume of the self-timer sound played 2 sec. before the shutter 45
is released.
Shutter Volume
Adjusts the Shutter Sound volume when the shutter button is pressed all 34
the way. There is no shutter sound in Movie mode.
Playback Vol.
61, 95
Adjusts the volume of movie sounds and sound memos.
71
Reference
Page
The [Auto Power Down] and [Display Off] settings can be set by pressing
the SET button.
Auto Power Down
Sets whether or not the camera automatically powers down after a
specified period of time elapses without camera operation. 31
• On* /Off
Power Saving
Display Off
Specifies a period of time before the LCD monitor turns off when no
camera operation is performed.
• 10 sec. • 1 min.* 31
• 20 sec. • 2 min.
• 30 sec. • 3 min.
Date/Time Sets the date, time and date format. 22
Format Formats (initializes) memory cards. 19
Sets how file numbers are assigned to images.
File No. Reset 115
• On/Off *
Sets whether or not images shot with the camera held vertically are
Auto Rotate automatically rotated in the display. 92
• On*/Off
Sets the format of the MF indicator’s displayed distance units.
Distance Units • m/cm* 91
• ft/in
* Default setting
72
Reference
Page
Sets the language used in the menus and messages on the LCD monitor.
• English* (English) • Ɋɭɫɫɤɢɣ (Russian)
• Deutsch (German) • Português (Portuguese)
• Français (French) • ǼȜȜȘȞȚțȐ (Greek)
• Nederlands (Dutch) • Polski (Polish)
• Dansk (Danish) • ýeština (Czech)
Language • Suomi (Finnish) • Magyar (Hungarian) 23
• Italiano (Italian) • Türkçe (Turkish)
• Norsk (Norwegian)
Advanced Functions
• (Traditional Chinese)
• Svenska (Swedish) • (Korean)
• Español (Spanish) • (Japanese)
• (Simplified Chinese)
You can also change the language in Playback mode by holding the SET
button and pressing the MENU button.
Sets the video output signal standard.
Video System • NTSC 115
• PAL
73
Customizing the Camera (My Camera Settings)

You can select the theme, start-up image and sound, operation sound, self-timer sound and shutter sound
used on this camera. These are called My Camera settings. You can also customize the and
options for each item with images recorded on the memory card and newly recorded sounds or by using
the supplied software. See the Software Starter Guide for details.
Reference
Item/Menu Screen Setting Content
Page
Selects a common theme for the start-up image, start-up sound, operation
Theme
sound, self-timer sound and shutter sound.*1
Start-up Image Sets the start-up image when you turn on the camera.
Start-up Sound Sets the start-up sound when you turn on the camera.*1
Operation Sets the sound when any button other than the shutter button is
Sound operated.*1
117
Sets the sound played 2 seconds before the shutter releases in self-timer
Selftimer Sound
mode.*1
Sets the shutter sound when you depress the shutter button. There is no
Shutter Sound
shutter sound in Movie mode.*1
My Camera menu
(Off)/ *2/ /
settings content
*1 How the [Mute] setting in the [ (Set up)] menu and each sound setting in the [ (My Camera)] menu are
related
To turn off the start-up sound, operation sound, self-timer sound and shutter sound all at once, set [Mute] in the
[ (Set up)] menu to [On]. When [Mute] is set to [On], each sound option will not play even if they are set individually
to [On]. Note that the warning signal beeps even when the [Mute] setting is [On].
*2 Default setting
74
Resetting the Settings to Default z The following settings do not reset to

You can reset the menu and button operation default.
- [Date/Time], [Language] and [Video
settings to default. System] in the [ (Set up)] menu (p. 72,
73)
1 Turn the power on. - The custom white balance (p. 85)
z Can be performed from Shooting or Playback - Newly registered My Camera settings
mode. (p. 117)
z When the camera is connected to a
2 Press the MENU button for longer computer or a printer, this operation does
than 5 seconds. not work.
Advanced Functions
z The message “Reset settings to default?”
appears on the LCD monitor.
3 Press the or
button to select
[OK], and press
the SET button.
z The screen on the right
appears while resetting.
The normal screen resumes when resetting is
complete.
z To cancel resetting, select [Cancel] instead of
[OK].
75
Using the Mode Dial (Creative z If the LCD monitor is on,

Zone) the shutter speed and
aperture value appear
automatically.
Mode Dial
You can freely select camera settings such z The camera operates in
as the shutter speed and aperture value to the following ways
suit your shooting purposes. according to the selected Shutter Aperture
After settings are made, shooting procedures are function: Speed Value
the same as for the mode (p. 33).
P The camera automatically sets the shutter
speed and aperture value.
See Functions Available in Each Shooting Mode
(p. 159) at the end of this manual to find out which Tv Theoruserbutton.
selects a shutter speed using the
settings can be changed in which shooting
modes. Av The
the
user selects an aperture value using
or button.
How to Use the Mode Dial The user selects the setting (the shutter
M speed or the aperture value) using the SET
1 Check that the camera is in button and select a shutter speed or an
aperture value using the or button.
Shooting mode.
z When the shutter button is pressed halfway,
2 Turn the shooting the shutter speed and aperture value appear
mode dial and set on the LCD monitor. The correct exposure has
the icon of the been set when they appear in white.
function you wish 3 Shoot the image.
to use to .
76
Program AE Setting the Shutter Speed

Use the program AE mode to have the camera When you set the shutter speed in the shutter-
automatically set the shutter speed and aperture speed priority AE mode, the camera automatically
value to match the brightness of the scene. selects an aperture value to match the brightness.
Faster shutter speeds allow you to catch an
z The shutter speed and aperture value will show instantaneous image of a moving subject while
in red on the LCD monitor when the correct slower speeds create a flowing effect and allow
exposure cannot be obtained. Use the following you to shoot without a flash in dark areas.
methods to obtain the correct exposure and
make them appear in white. z If the aperture value shows in red, the
Advanced Functions
• Use the flash image is underexposed (insufficient light) or
• Change the ISO speed setting overexposed (too much light). Adjust the
• Change the metering mode shutter speed using the or button until
Differences between the P and Modes. the aperture value display turns to white.
z The following settings can be adjusted in P z The nature of CCD image sensors is such
that noise in the recorded image increases
mode, but not in mode.
at slow shutter speeds. This camera,
• Exposure Compensation • White Balance however, applies special processing to
• ISO Speed • Flash (Flash on) images shot at shutter speeds slower than
• AF frame selection • Photo Effects 1.3 seconds to eliminate the noise, thereby
• Continuous Shooting • Metering Mode producing high-quality images.
• Manual Focus Nevertheless, a certain amount of
processing time may be required before the
z For the correlation between aperture value and next image can be shot.
shutter speed, see page 78.
77
z Please note that camera shake becomes a Shutter Speed Display

factor at slow shutter speeds. If the camera The numbers in the table below indicate the
shake warning appears on the LCD shutter speed in seconds. 1/160 indicates 1/
monitor, secure the camera to a tripod 160 second. Also, quote marks indicate the
before shooting. decimal place, so that 0"3 indicates 0.3
z The aperture value and shutter speed second and 2" indicates 2 seconds.
change according to the zoom state as 15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3
follows. 1" 0"8 0"6 0"5 0"4 0"3
Shutter 1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30
Aperture 1/40 1/50 1/60 1/80 1/100 1/125 1/160 1/200
Speed
Value 1/250 1/320 1/400 1/500 1/640 1/800 1/1000
(seconds)
1/1250 1/1600 1/2000
F2.6 – 3.5 15 to 1/1250
Wide Angle
F4.0 – 8.0 15 to 1/2000
F5.5 – 7.1 15 to 1/1250
Telephoto
F8.0 15 to 1/2000
z The fastest shutter speed for flash
synchronization is 1/500 second. The
camera automatically resets the shutter
speed to 1/500 second if a faster speed is
selected.
78
Setting the Aperture

z Please note that camera shake becomes a
The aperture adjusts the amount of light that factor with larger aperture values that slow
passes through the lens. When you set the down shutter speeds. If (camera shake
aperture in the aperture-priority AE mode, the warning) appears on the LCD monitor,
camera automatically selects a shutter speed to secure the camera to a tripod before
shooting.
match the brightness. z In this mode, the shutter speed range with
Selecting a lower aperture value (opening the synchronized flash is 1/60 second to 1/500
aperture) allows you to fade the background and second. The aperture value setting may
create a beautiful portrait. A higher aperture value therefore be changed automatically to
(closing it) brings the entire range from foreground match the synchronized flash speed even if
Advanced Functions
to background into focus. The larger the aperture its value was set previously.
value, the greater the range of the image brought Aperture Value Display
into clear focus. The larger the aperture value, the smaller the
lens aperture.
z If the shutter speed shows in red on the F2.6 F3.2 F3.5 F4.0 F4.5 F5.0 F5.5 F5.6
LCD monitor, the image is underexposed F6.3 F7.1 F8.0
(insufficient light) or overexposed (too much
light). Adjust the aperture value using the
or button until the shutter speed display
turns to white.
z Some aperture values may not be available
with certain zoom positions (p. 78).
79
Manually Setting the Shutter

z See page 159 for settings that can be
Speed and Aperture changed in this mode.
z If you wish to change the exposure, select
You can manually set the shutter speed and the shutter speed or the aperture with the
aperture to shoot images. You can select settings SET button and change the value using the
such as a long exposure to suit your purpose. or button.
z When you press the shutter button halfway, the z If the zoom is adjusted after these values
difference between the standard exposure* and are set, the aperture value may change in
the selected exposure appears on the LCD accordance with the zoom position.
monitor. If the difference is more than ±2 stops, z The LCD monitor’s brightness matches the
“–2” or “+2” appears in red. selected shutter speed and aperture value.
* The standard exposure is calculated by the AE function When you select a fast shutter speed or
according to the selected metering method. shoot a subject in a dark place, the image
will always be bright if the flash is set to
(Flash On, with Red-eye Reduction)
or (Flash On).
z For the correlation between aperture value
and shutter speed, see page 78.
80
Switching between Focusing 2 Select [On] or [Off]

Modes using the or
button.
Mode Dial z After selecting an option,
You can change the autofocus frame (AF you can immediately
frame) selection method. The AF frame will shoot the image by
appear when the LCD monitor is turned on pressing the shutter button.
(p. 24). 3 Press the MENU button.
The camera automatically
Advanced Functions
On selects between 9 AF z The AF frame is set to center-point when
(Auto frames to focus on using the digital zoom.
Selection) according to the shooting z When [On] is selected, pressing the shutter
conditions. button halfway will display the AF frames in
Of 9 AF frames, the center the LCD monitor.
Off one is selected to focus.
(Center- This is convenient for
point) making sure the focus is
exactly where you want it.
indicates the AF frame which appears on the LCD
monitor
1 In the [ (Rec.)] menu, select

(AiAF).
z See Selecting Menus and Settings (p. 66).
81
Switching between Metering 1 Select

Modes *(Evaluative) in
the FUNC. menu.
Mode Dial z See Selecting Menus and
Settings (p. 66).
Appropriate for standard shooting
conditions, including backlit * The current setting is
scenes. The camera divides displayed.
images into several zones for
light metering. It evaluates the
2 Select a metering
complex lighting conditions, such mode using the
Evaluative
as the position of the subject, the or button.
brightness, the background, the
direct light, and the backlighting,
and adjusts the settings to the
correct exposure for the main
subject.
Averages the light metered from
Center-
the entire frame, but gives
weighted
greater weight to the subject
Averaging
matter at the center.
Meters the area within the spot
AE point frame at the center of
the LCD monitor. Use this setting
Spot
when you want to set the
exposure on the subject in the
center of the monitor.
82
Adjusting the Exposure z You can check the results of the compensation
by viewing the image on the LCD monitor when
Mode Dial it is on.
z You can shoot the image right after selecting
Adjust the exposure compensation setting to settings by pressing the shutter button. The
avoid making the subject too dark when it is menu displays again after the shot, allowing
backlit or shot against a bright background, you to change the settings easily.
or to avoid making lights appear too bright in
night shots. 3 Press the FUNC. button.
z To reset the exposure compensation, return
1 Select *(+/– the setting to 0 using the or button.
Advanced Functions
(Exp.)) in the
FUNC. menu. See Photo Tips and Information (p. 151).
Settings (p. 66).
displayed.
2 Adjust the
compensation
using the or
button.
z The settings can be adjusted in 1/3 stops in the
range of –2 stops to +2 stops.
83
Adjusting the Tone (White For recording under daylight

Balance) fluorescent, or daylight
Fluorescent H
fluorescent-type 3-wavelength
fluorescent lighting
Mode Dial
For recording with the optimal
When the white balance is set to match the white balance data memorized
light source, the camera reproduces colors Custom in the camera from a white-
more accurately. colored object, such as white
paper or cloth
Combinations of setting contents and light source
are as follows.
Settings are automatically set
1 Select *(Auto) in
Auto the FUNC. menu.
by the camera
For recording outdoors on a z See Selecting Menus and
Daylight Settings (p. 66).
bright day
For recording under overcast,
Cloudy displayed.
shady or twilight skies
For recording under tungsten 2 Select the white balance you wish
Tungsten and bulb-type 3-wavelength to set using the or button.
fluorescent lighting
z See Setting a Custom White Balance (p. 85).
For recording under warm- z When the LCD monitor is on, you can check
white, cool-white or warm-
Fluorescent
white (3-wavelength)
the setting on the display.
fluorescent lighting z A shot can be taken immediately by pressing
the shutter button. The menu will reappear
after the shot, allowing you to adjust the setting
easily.
84
3 Press the FUNC. button. 1 Select *(Auto) in the FUNC.

The white balance cannot be adjusted when
menu.
the photo effect is set to (Sepia) or (B/ z See Selecting Menus and Settings (p. 66).
W) (p. 88). * The current setting is displayed.
2 Select (Custom) using the or

Setting a Custom White Balance button.
You can set a custom white balance to obtain 3 Aim the camera at
the optimal setting for the shooting conditions a piece of white
Advanced Functions
by having the camera evaluate an object, paper or cloth, or
such as a piece of white paper or cloth, or a
gray card and
photo-quality gray card that you wish to
establish as the standard white color. press the SET
In particular, take a custom white balance button.
reading for the following situations that are z Aim the camera so that the white paper or
difficult for the (Auto) setting to detect cloth, or gray card, completely fills the frame at
the center of the LCD monitor or completely
correctly. fills the viewfinder.
z Shooting close-ups (Macro mode)
z Shooting subjects of monotone color (such as z You can shoot right after setting the white
sky, sea, or forest) balance by pressing the shutter button. The
z Shooting with a peculiar source of light (such as menu displays again after the shot, allowing
a mercury-vapor lamp) you to change the settings easily.
85
z You are recommended to set the white z In mode, white balance data cannot be
balance when shooting in the following read. Use a different shooting mode to read
conditions. the white balance data beforehand.
- The shooting mode dial is set to P and z The custom white balance setting is not
the exposure compensation is set to ±0. cancelled even if settings are reset to
The correct white balance may not be default settings (p. 75).
obtained when the exposure is incorrect
(image is completely black or white).
- The zoom is positioned to the telephoto
end setting.
Set the digital zoom to [Off].
- The flash is set to (Flash On) or
(Flash Off).
Use the same flash setting as the one that
will be used for shooting when you set the
white balance. If the white balance setting
conditions and shooting conditions are not
the same, the correct white balance may
not be obtained.
When the flash is set to (Auto with
red-eye reduction) or (Auto), the flash
may fire while the white balance data is
recorded to the custom white balance. If
this happens, make sure the flash also
fires when you shoot the image.
- The ISO speed is set to the same setting
to shoot the image.
86
Changing the ISO Speed z Higher ISO speeds increase the image
noise. To take clean images, use as low an
Mode Dial ISO speed as possible.
By raising the ISO speed, you can shoot z The [AUTO] setting selects the optimal
bright images even in poor lighting speed. It will automatically raise the speed
when the light from the flash is insufficient
conditions. This function is convenient when to illuminate the subject matter.
you want to prevent camera shake, shoot
without the flash or shoot with a faster shutter
speed in dark conditions. z You can easily shoot images in dark places
such as indoor settings by using the
Advanced Functions
1 Select *(ISO (Indoor (p. 52)) option of the SCN mode.
z See Photo Tips and Information (p. 152).
Speed) in the
FUNC. menu.
Settings (p. 66).
displayed.
2 Select the ISO speed using the

or button.
z A shot can be taken immediately by pressing
after the shot, allowing you to adjust the
settings easily.
87
Changing the Photo Effect 2 Select the photo effect using the
or button.
Mode Dial z If the LCD monitor is on, you can check the
You can shoot with different saturation and photo effect by viewing the image on the LCD
contrast color effects. monitor.
Records normally with this the shutter button. The menu will reappear
Effect Off
setting. after the shot, allowing you to adjust the
Emphasizes the contrast and settings easily.
Vivid color saturation to record in bold
color. 3 Press the FUNC. button.
Tones down the contrast and
Neutral color saturation to record neutral
hues.
Low Records subjects with softened
Sharpening outlines.
Sepia Records in sepia tones.
B/W Records in black and white.
1 Select *(Effect
Off) in the FUNC.
menu.
Settings (p. 66).
displayed.
88
Adjusting the Flash Output When the flash output is low, less shadow
appears in the image. However, when
Mode Dial shooting a wide scene or area, the image will
In M mode, the flash output can be controlled likely be darker due to insufficient light. When
in three steps when shooting. adjusting the flash output, consider all the
shooting conditions, including the distance to
1 Select (Flash the subject.
Output) in the
FUNC. menu.
Advanced Functions
Settings (p. 66).
2 Adjust the flash output using the
or button.
after the shot, allowing you to adjust the
settings easily.
89
Shooting Hard-to-Focus Subjects Shooting with Focus Lock
Mode Dial 1 Aim the AF frame at an object at a

The autofocus may not work well on the similar distance to the subject you
following types of subjects. wish to shoot.
z Subjects with extremely low contrast to the
surroundings 2 Press the shutter button halfway to
z Subjects mixing close and far objects
lock the focus.
z The AE setting will also lock when you do this.
z Subjects with extremely bright objects at the The exposure may occasionally be incorrect if
center of the composition the difference between the two items is too
z Subjects that are moving quickly great. Use AF Lock when this happens.
z When shooting through glass, get as close as
possible to avoid reflection off the glass. 3 Recompose the image and press
z Subject with horizontal stripes the shutter button all the way to
shoot the image.
To shoot these subjects, first aim the camera
at an object at a similar distance, lock the
focus and recompose the image with the Shooting with AF Lock
desired subject, or use manual focus.
1 Press the shutter button halfway to
lock the focus. Keep it pressed
and press the MF button.
z The icon appears on the LCD monitor.
90
z The focus will stay looked even if the shutter Shooting in Manual Focus Mode
button and the MF button are released.
z Pressing the MF button again cancels the AF The focus can be manually set.
lock setting.
1 Press the MF
2 Recompose the image and press button until
the shutter button all the way to appears.
shoot the image. z The indicator
appears.
AF lock is not available in and z When the [ (Rec.)]
Advanced Functions
modes. menu’s [MF-Point Indicator
Zoom] is set to [On], the
portion of the image in
z When shooting with focus lock, you can that frame will appear magnified.*
lock the focus to the subject in the center * Except in the (Stitch Assist) or (Movie)
AF frame by setting to [Off] in the modes, when the digital zoom is activated or a TV
[ (Rec.)] menu beforehand. is used as the display.
z Shooting with AF Lock is convenient * Can also be set so that the image displayed is not
because you can let go of the shutter button magnified (p. 69).
to recompose the image. Moreover, the z The indicator shows approximate figures.
focus stays locked after the shot is taken, Use them as a shooting guideline only.
so the same focus is used in subsequent
shots. z In the Tv, Av, or M modes, pressing the SET
button cycles the selection between the shutter
speed, the aperture value, and the MF
indicator. (A green appears next to the
selected item).
91
2 Focus using the or button Setting the Auto Rotate Function

and shoot the image.
This camera is equipped with an Intelligent
z Adjust the focus using the or button until
the image appears focused on the LCD Orientation sensor that detects the
monitor. orientation of an image shot with the camera
z Pressing the MF button again cancels the held vertically and automatically rotates it to
manual focus mode. the correct viewing orientation in the display.
You can set this function on/off.
z You can use manual focus in the macro
focal distance 5 to 45 cm (2.0 in. to 1.5 ft.) 1 In the [ (Set up)]
at wide angle end and 30 to 45 cm (11.8 in. menu, select
to 1.5 ft.) at telephoto end. In this case, the
scale of the MF indicator will be changed. (Auto Rotate).
z You can change the MF indicator displayed z See Selecting Menus and
distance units (p. 72). Settings (p. 66).
2 Select [On] and press the MENU

button.
z When this function is [On], an icon showing the
orientation of the camera appears at the upper
right corner of the LCD monitor (when
information display is on).
Normal
Right end down
Left end down
92
z This function may not operate correctly

when the camera is pointed straight up or
down. Check that the arrow is pointing
in the right direction and if it is not, then set
the Auto Rotate function to [Off].
z Even if the Auto Rotate function is set to
[On], the orientation of images downloaded
to a computer will depend upon the
software used to download the images.
Advanced Functions
When the camera is held vertically to shoot,
the Intelligent Orientation sensor judges the
upper end to be “up” and the lower end to be
“down”. It then regulates the optimal white
balance and exposure for vertical
photography. This function operates
regardless of the on/off status of the Auto
Rotate function.
93
Playback – Advanced Functions
Rotating Images in the Display z The display will return to the Play menu.
Pressing the MENU button again returns to the
You can rotate an image by 90° or 270° playback screen.
clockwise in the LCD monitor. z Movies cannot be rotated.
z When images are downloaded to a
computer, the orientation of images rotated
by the camera will depend upon the
software used to download the images.
(Original) 90° 270°

z Rotated images can be magnified (p. 59).
1 In the [ (Play)] menu, select z Images taken vertically with the auto rotate
function (p. 92) set to [On] will automatically
(Rotate) and press the SET be rotated to the vertical position when
button. viewed on the LCD monitor.
2 Press the or button to select
the image to be rotated and press
the SET button.
z The image cycles to the next orientation (90°
J 270° J original) each time the SET button is
pressed.
94
Attaching Sound Memos to 3 Select (Record) using the or

Image button and press the SET
button
In Playback mode (including single image z Recording starts and the elapsed recording
playback and index playback), you can attach time and remaining recording time is displayed.
sound memos (up to 60 seconds) to an z To stop recording, press the SET button. To
image. The sound data is saved in WAVE resume recording, press the SET button again.
format. z Up to 60 seconds of recordings may be added
to any one image.
1 Select (Sound Memo) in the
Advanced Functions
[ (Play)] menu and press the Playing the Sound Memos
z Select (Play) in step 3. The icon is
SET button. displayed on images with sound memos.
z See Selecting Menus and Settings (p. 66). z To stop playback, press the SET button. To
z icon appears. resume playback, press the SET button again.
You can adjust the volume using the or
2 Select the image to button.
which you wish to Erasing the Sound Memos
attach the sound z Select (Erase) in step 3.
memo using the Exiting the Sound Memos Settings
or button, and z Select (Exit) in step 3.
press the SET
Sound Memo
button. Panel
z The Sound Memo panel
appears.
95
z You cannot attach sound memos to movies.

Auto Play
z When the memory card capacity is full, a Use this feature to automatically play back all
“Memory card full” message appears and
recording will not be possible to that card. of the images in the memory card (Auto
z You cannot record or play back sound Play). The LCD monitor displays each image
memos for images that already have an for approximately 3 seconds.
incompatible sound memo attached. If you
attempt to record or play such images the 1 In the [ (Play)] menu, select
“Incompatible WAVE format” message will (Auto Play) and press the SET
display. Incompatible sound data can be
deleted with this camera. button.
z Sound memos for protected images cannot z See Selecting Menus and Settings (p. 66).
be erased (p. 97). z Once you have selected it, Auto Play starts.
z As with the single image playback mode, using
z You can also adjust the volume of the the or button during auto play will
sound memo in the Set up menu (p. 71). advance through the images more rapidly.
z If you set [Mute] to [On] in the Set up menu Pausing and Resuming Auto Play
(p. 70), no sound is reproduced. However, z You can pause Auto Play at any time by pressing
you can resume the sound and adjust the
volume during sound playback by using the
the SET button. You can then resume it by
or button. pressing the SET button again.
Stopping Auto Play
z To stop Auto Play, press the MENU button.
96
z To release the protection, press the SET

z The display interval may vary for some button again.
images.
z Movies play for the length of time that they z You can make the selection of images easier
were recorded. by toggling between single image playback
z The power saving function is disabled and index playback by pressing the zoom lever
during Auto Play (p. 96). (p. 58, 60).
Protecting Images z The display will return to the Play menu.
Pressing the MENU button again returns to the
Use the protect feature to protect important playback screen.
Advanced Functions
images and movies from accidental erasure.
1 In the [ (Play)] menu, select Please note that formatting (initializing) a
memory card (p. 19) erases all data, including
(Protect) and press the SET protected images. Please check the contents
button. of a memory card before formatting it.
2 Select an image
you want to
protect using the
or button and
press the SET
button.
z The icon appears on Protected Icon
protected images.
97
Various Functions
About Printing
Images shot with this camera can be printed using one of the following methods.
z You can easily print images stored in the memory card by connecting the camera to a direct print
compatible printer*1 with a cable and then pressing the camera’s button.
z You can select images and specify the number of print copies (DPOF*2 Print Settings) with the camera
before sending the image (memory card) to a photo developing service.
*1 As this camera complies with the industry standard PictBridge, you can print images using Canon Compact Photo
printers (SELPHY CP series), Card Photo printers, Bubble Jet Printers (PIXMA series/SELPHY DS series), in addition
to non-Canon PictBridge compliant printers.
*2 Digital Print Order Format
This manual explains the DPOF print settings. For information on how to print images, refer to the Direct
Print User Guide supplied with the camera. Also, refer to your printer’s manual.
98
Various Functions
Print settings
(DPOF Print Settings) (p. 100)
Image Transmission Settings
(DPOF Transfer Order) (p. 104)
Direct Print Compatible Printers (Canon)

Direct Print Compatible Printing
Photo Lab J For details, see the Direct Print User
Guide.
J Also, refer to your printer’s manual.
Various Functions
Compact Card Photo Bubble Jet
Photo Printer Printer Printer
Printers that Can Be Used with this Camera

Canon Direct Print Compatible Compact Photo
printers (SELPHY CP series), Card Photo
printers
J See the System Map
Direct Print Compatible Bubble Jet Printers
J For more information, visit your nearest
Canon retailer.
99
Various Functions
DPOF Print Settings Selecting Images Singly

You can select images on a memory card for 1 In the [ (Play)] menu, select
printing and specify the number of print (Print Order) and press the SET
copies in advance using the camera. This is button.
extremely convenient for sending the images z See Selecting Menus and Settings (p. 66).
to a photo developing service that supports
DPOF, or for printing on a direct print 2 Select [Order]
compatible printer. using the , ,
Refer to the Direct Print User Guide for or button and
instructions on how to print. press the SET
button.
z The icon may appear on images that have z Selecting [Reset] will
had print settings set by another DPOF cancel all print settings for the images.
compliant camera. These settings will be
overwritten by those set by your camera.
z The output of some printers or photo
3 Select images for printing.
developing services may not reflect the
z As shown below, selection methods differ
specified print settings. depending on the selected (Print Type)
z Print settings cannot be set for movies. setting (p. 103).
(Standard)/ (Both)
Single image playback
100
Various Functions
z Select an image using Number of Copies Index playback (p. 60)

the or button and z Select an image using the , , , or
specify the number of button and press the SET button to select or
copies (up to 99) to be deselect it. A checkmark displays on
printed using the or selected images.
button.
z Returns to the Print Order menu. Pressing the
Index playback (p. 60) MENU button again returns to the Play menu.
z Select an image using the , , , or Press it again to go back to the Playback
button and press the SET button to screen.
determine the selection. Use the or
button to specify the number of copies (up to Selecting All Images on the Memory Card at a
99) to be printed. Time
Various Functions
(Index) 1 In the [ (Play)]
Single image playback menu, select
z Select an image using Index print selection (Print Order)
the or button and
press the SET button and press the SET
to select or deselect it. button.
A checkmark displays z See Selecting Menus and
on selected images. Settings (p. 66).
101
Various Functions
2 Select [Mark all] z Images are printed in order from oldest to

using the , , newest by the shooting date.
or button and z A maximum of 998 images can be set.
press the SET z When [Print Type] is set to [Both], the
number of copies can be set. When it is set
button. to [Index], the number of copies cannot be
set (only one copy will be printed).
3 Select [OK] using z Print settings can also be assigned to
the or button images with the bundled software programs
and press the SET (ZoomBrowser EX or ImageBrowser) on a
computer.
button. z Do not set the date in the DPOF print
z The display will return to settings when printing images that have had
the Print Order menu. the date embedded with the [Date Stamp]
function. This may cause the date to be
4 Press the MENU button. printed twice.
z The display returns to the Play menu. Press
the MENU button again to go back to the
Playback screen.
102
Various Functions
Setting the Print Style 2 Select [Set up]

Set the print style after selecting the image to print. using the , ,
The following print settings can be selected. or button and
Prints one image per press the SET
Standard button.
page.
Prints the selected z Selecting [Reset] will
images together at a cancel all print settings for the images.
Index
reduced size in an index
Print Type
format. 3 Select (Print Type), (Date) or
Prints the images in both (File No.) using the or
Both the standard and index button, then select a setting using
formats. the or button.
Various Functions
Adds the date to the
Date Print Type
print.
Adds the file number to
Select [Standard], [Index]
File No. or [Both].
the print.
1 In the [ (Play)] Date

menu, select Select [On] or [Off].
(Print Order)
and press the SET
button. File No.
z See Selecting Menus and Select [On] or [Off].
Settings (p. 66).
103
Various Functions
4 Press the MENU button. Image Transmission Settings

z Returns to the Print Order menu. Pressing the (DPOF Transfer Order)
MENU button again returns to the Play menu.
Press it again to go back to the Playback You can use the camera to specify settings
screen. for images before downloading to a
computer. Refer to the Software Starter
z When [Print Type] is set to [Index], the Guide for instructions on how to transfer
[Date] and [File No.] cannot be set to [On] at images to your computer.
the same time. The settings used on the camera comply with
z Both [Date] and [File No.] can be set to [On]
if [Print Type] is set to [Both] or [Standard].
the Digital Print Order Format (DPOF)
However, the data that can be printed may standards.
vary depending on the type of printer you
are using. The icon may appear on images that have
z Embedded dates in (Postcard Print had transfer settings set by another DPOF
mode (p. 54)) print out even when [Date] is compliant camera. These settings will be
set to [Off]. overwritten by those set by your camera.
The date prints in the format specified in the Selecting Images for Transferring
Date/Time menu (p. 22).
There are two ways to select images.
z Select the images singly
z Select all the images on a memory card
104
Various Functions
Selecting Images Singly z You can switch to index playback (9 image

display) by pressing the zoom lever toward
1 In the [ (Play)] menu, select and select images using the same procedures.
(Transfer Order) and press the
SET button.
z Returns to the Transfer Order menu.Pressing
z See Selecting Menus and Settings (p. 66). the MENU button again returns to the Play
2 Select [Order] menu. Press it again to go back to the
Playback screen.
using the or
button and press Selecting All Images on the Memory Card at a
the SET button. Time
z Selecting [Reset] will
cancel all transfer order 1 In the [ (Play)]
Various Functions
settings. menu, select
(Transfer
3 Select an image Order) and press
using the or the SET button.
button and press z See Selecting Menus and
the SET button to Settings (p. 66).
select and
deselect them. 2 Select [Mark all]
z A checkmark displays on selected images. using the or
button and press
the SET button.
105
Various Functions
3 Select [OK] using Downloading Images to a

the or button Computer
and press the SET
button. The following methods can be used to
download images recorded by the camera to
z The display returns to the
Transfer Order menu.
a computer. Some methods are not
applicable to some operating systems. See
4 Press the MENU button. Computer System Requirements (p. 107) in
z The display returns to the Play menu. Pressing advance.
the MENU button again returns to the playback z Downloading via a Camera to Computer
screen. Connection
Windows Windows Windows Windows Mac
z Images are transferred in order from oldest 98 SE Me 2000 XP OS X
to newest by the shooting date.
z A maximum of 998 images can be selected. z With this method, you download images using
computer commands after you have installed
the appropriate software.
See Connecting the Camera to a
Computer (p. 107) and the separate
Software Starter Guide.
106
Various Functions
Connecting the Camera to a Computer

Windows Windows Windows Windows
98 SE Me 2000 XP
Computer System Requirements
z With this method, you download images using
camera button operations after you have z Windows
installed the appropriate software (the Windows 98 Second Edition (SE)
computer settings only need to be adjusted for Windows ME
the first download). OS Windows 2000 Service Pack 4
See Connecting the Camera to a Windows XP (Including Service Pack 1
Computer (p. 107) and Downloading and Service Pack 2)
Images by Direct Transfer (p. 111). Computer The above OS should be pre-installed on
Model computers with built-in USB ports.
Windows Mac CPU Pentium 500 MHz or higher processor
XP OS X
Various Functions
Windows 98 SE/Windows Me: 128 MB or more
z With this method, you download images using RAM
Windows 2000/Windows XP: 256 MB or more
computer commands without installing any
software. Interface USB
See Connecting the Camera to a z Canon Utilities
Computer (p. 107) (software installation ZoomBrowser EX: 250 MB or more
is not required) and Connecting the (including the PhotoRecord printing program)
Camera to the Computer to Download Free Hard PhotoStitch: 40 MB or more
Images without Installing the Software Disk z Canon Camera TWAIN Driver:
(p. 113). Space 25 MB or more
z Canon Camera WIA Driver:
25 MB or more
z Downloading from a Memory Card z ArcSoft PhotoStudio: 50 MB or more
See Downloading from a Memory Card 1,024 x 768 pixels/High Color (16 bit) or
(p. 113). Display
better
107
Various Functions
z Macintosh
z You do not need to turn off the camera or
OS Mac OS X (v10.1.5 – v10.3) computer power when making a USB
Computer The above OS should be pre-installed on connection.
Model computers with built-in USB ports. z Please refer to your computer’s manual for
information regarding the location of the
CPU PowerPC G3/G4/G5 USB port.
RAM 256 MB or more z You are recommended to use new AA size
Interface USB batteries, fully charged AA size NiMH
batteries (sold separately) or AC Adapter
z Canon Utilities Kit ACK800 (sold separately) to power the
Free Hard ImageBrowser: 200 MB or more camera when connecting to a computer
Disk Space PhotoStitch: 40 MB or more (p. 129, 131).
z ArcSoft PhotoStudio: 50 MB or more z All procedures performed with a connection
Display 1,024 x 768 pixels/32,000 Colors or better to a USB 2.0 compliant board are not
guaranteed.
IMPORTANT
You must install the software and driver bundled
on the supplied Canon Digital Camera Solution
Disk onto your computer before connecting the
camera to a computer.
The camera will not operate correctly if you

connect it to your computer before installing
the driver and software. If this happens,
please refer to the Troubleshooting section of
the Software Starter Guide.
108
Various Functions
1 Install the driver and the software

applications bundled on the Canon DIGITAL Terminal
Digital Camera Solution Disk (first 1. Open the terminal cover
with your finger nail.
time only). 2. Hold the USB connector with
z Please see the Software Starter Guide for the the side facing the front of
installation procedures. the camera and insert it into
z With a Macintosh, it is next necessary to set the DIGITAL terminal
the ImageBrowser auto start settings. Please securely.
see the Software Starter Guide for details.
2 Use the supplied interface cable to Always grasp the connector’s
connect the computer’s USB port sides to remove the interface
cable from the camera’s
to the camera’s DIGITAL terminal.
Various Functions
DIGITAL terminal.
USB port
3 Slide the camera’s mode switch to

.
4 Press the Power button until the
power lamp lights green.
Interface cable
109
Various Functions
Windows If the events dialog fails to appear, click the

J Proceed to step 5. [Start] menu, followed by [Programs] or [All
Programs], [Canon Utilities],
Macintosh [CameraWindow], and [CameraWindow].
J Refer to the Software Starter Guide and
download images.
z The following window appears.
5 Select [Canon CameraWindow] in

the event dialog that appears on
the computer and click [OK] (first
time only).
110
Various Functions
Using the software and computer to download Transfers and saves to the
images: DPOF Trans. computer only the images with
J See the Software Starter Guide. Images DPOF Transfer Order settings
(p. 104).
Using the Camera to Download Images (Direct Transfers and saves single
Transfer Function): Select &
Transfer
images to the computer as you
J See Downloading Images by Direct Transfer view and select them.
(p. 111).
Transfers and saves single
images to the computer as you
Wallpaper view and select them. The
Downloading Images by Direct transferred images display on
Transfer the computer desktop.
Use this method to download images using camera
Various Functions
operations.
Install the supplied software and adjust the 1 Confirm that the
computer settings before using this method for the Direct Transfer
first time (p. 109). menu is displayed
Transfers and saves all images on the camera’s
All Images
to the computer. LCD monitor.
Transfers and saves to the z The button will light Direct Transfer Menu
computer only the images that blue.
New Images
have not been previously z Press the MENU button if the Direct Transfer
transferred. menu fails to appear.
111
Various Functions
z The button will blink blue while

All Images/New Images/DPOF Trans. Images
downloading is in progress.
2 Use the or
button to select z The display will return to the Direct Transfer
, or and menu.
press the
button. Only JPEG images can be downloaded as
z The images will wallpaper for the computer. After images are
download. During downloading, the transferred, they are automatically converted
button blinks blue. When downloading is to BMP images.
complete, the display will return to the Direct
Transfer menu.
The option selected with the button is
z To cancel the transfer, press the SET button. retained even when the camera’s power is
turned off. The previous setting will be in
Select & Transfer/Wallpaper effect the next time the Direct Transfer menu
is displayed. The image selection screen will
2 Use the or button to select appear directly when the [Select & Transfer]
or and press the or the [Wallpaper] option was last selected.
button (or SET button).
3 Use the or button to select
images to download and press the
button (or SET button).
z The images will download.
112
Various Functions
Connecting the Camera to the Downloading from a Memory Card

Computer to Download Images
without Installing the Software 1 Eject the memory card from the
If you are using Windows XP or Mac OS X (v10.1.5 camera and insert it into a memory
– v10.3), you can use the software distributed with card reader connected to the
these operating systems to download images computer.
without installing the software bundled on the z Refer to your card adapter’s or card reader’s
Canon Digital Camera Solution Disk. This is useful manual for information regarding the
for downloading images to a computer in which the connection between the computer and card
software is not installed. adapter or card reader.
However, please note that there are certain
limitations to downloading images with this
method. For more details, please refer to the
2 Double-click the icon of the drive
containing the memory card.
Various Functions
supplied leaflet entitled For Windows® XP and Mac
OS X Users. z Depending on the operating system, a window
opens automatically.
1 Use the supplied interface cable to
3 Copy images from the card into a
connect the computer’s USB port
to the camera’s DIGITAL terminal. folder of your choice on the hard
z See steps 2 to 4 on page 109.
disk.
z The images are stored in the [xxxCANON]
2 Follow the onscreen instructions folders located in the [DCIM] folder (where xxx
to proceed with downloading. is a three-digit number from 100 to 998
(p. 116)).
113
Various Functions
Viewing Images on a TV Set 3 Plug the other ends of the AV

cable to the VIDEO IN and
You can use a video-compatible television as
a monitor to shoot or play back images when
AUDIO IN jacks on the TV.
it is connected to the camera with the Yellow Plug to the VIDEO IN Jack
supplied AV Cable AVC-DC300.
1 Turn off the camera (p. 30) and the
TV.
2 Attach the AV cable to the A/V Out Black Plug to the AUDIO IN Jack
terminal on the camera.
4 Turn on the TV and switch it to
Video mode.
5 Turn on the camera (p. 30).
z The image will appear on the TV. Shoot or
playback images as usual.
z If the images are not appearing on the TV
when shooting, press the DISP. button.
114
Various Functions
z No image will appear on the LCD monitor

Resetting the File Number
when the camera is connected to a TV The images you shoot are automatically
monitor.
z The video output signal can be switched assigned file numbers. You can select how
(NTSC or PAL) to accommodate different the file number is assigned.
regional standards (p. 73). The default The file number is reset to the start (100-0001)
setting varies between regions. each time a new memory card is inserted. New
- NTSC: Japan, U.S.A., Canada, Taiwan, On
images recorded on memory cards with existing
etc. images are assigned the next available number.
- PAL: Europe, Asia (excluding Taiwan),
Oceania, etc. The file number of the last image to be shot is
If the video system is set incorrectly, the Off memorized so that images recorded to a new
camera output may not display properly. memory card start from the next number.
z If the TV is a stereo model, you can plug the
1 In the [ (Set up)]
Various Functions
audio plug into either the left or right Audio
In jack. Please refer to the TV’s manual for menu, select
details.
z A TV set cannot be used in mode.
(File No. Reset).
Settings (p. 66).
2 Select [On] or [Off] using the or

button.
115
Various Functions
Setting the File Number Reset to [Off] is Folder File Capacity

useful for avoiding file number duplication Each folder usually contains up to 100
when images are downloaded to a computer. images. However, since images shot in
continuous shooting and Stitch Assist mode
About File and Folder Numbers
are always saved into the same folder, a
Images are assigned file number from 0001 to
folder may contain more than 100 images.
9900, and folders are assigned folder
The number of images may also exceed 100 if
numbers from 100 to 998 (Folder numbers
a folder contains images copied from a
cannot contain 99 in the last two digits).
computer or images shot with other cameras.
Please note, however, that the images in
folders containing 2001 or more images
cannot be played back in this camera.
Folder numbers cannot contain

99 in the last two digits.
116
Various Functions
Customizing the Camera (My 2 Select the [ (My

Camera Settings) Camera)] menu
pressing the
My Camera allows you to customize the button twice and select a menu
start-up image and start-up, operation, self-
timer and shutter sounds. Each menu item item using the or button.
has three choices. 3 Select the
Example: Start-up image contents you wish
to set using the
or button.
Various Functions
z The menu closes and settings are activated.
z In Shooting mode, the menu can be closed by
As default settings, My Camera setting has a pressing the shutter button halfway.
science fiction theme and My Camera setting
has an animal theme. z If you select [Theme] in step 2, you can
Changing My Camera Settings select a consistent theme for each of the My
Camera settings.
z If [Mute] in the [ (Set up)] menu is set to
1 Press the MENU [On], no sound is reproduced except for the
button. warning signal regardless of the selected
My Camera settings (p. 74). The Start-up
z The [ (Rec.)] or image displays.
[ (Play)] menu
appears.
117
Various Functions
Registering My Camera Settings Registering the Memory Card

Images and Sounds
Images recorded onto the memory card and
newly recorded sounds can be added to the
camera as My Camera settings. You can also 1 Slide the mode switch to .
use the supplied software to upload your z The camera turns into Playback mode.
computer’s images and sounds to the
camera. The following menu items can be
2 Press the MENU
saved to the camera.
button.
z The [ (Play)] menu
z Start-up Image z Start-up Sound appears.
z Operation Sound z Self-timer Sound
z Shutter Sound 3 Select [ (My
Camera)] menu
A computer is required to restore the My using the button
Camera Settings to the defaults. Use the and select the
supplied software (ZoomBrowser EX/ menu item you
ImageBrowser) to add the default settings to
the camera. wish to register
using the or button.
4 Select or
using the or
button.
z icon appears.
118
Various Functions
5 Press the DISP. button. 7 Select (Register Sound) using

z An image appears. the or button and press the
SET button.
Registering [Start-up Image] z Select (Exit) to return to the My Camera
menu without registering.
6 Select the image z Select (Play) to play the recorded sound.
you wish to
register using the 8 Select [OK] using
or button. the or button
and press the SET
7 Press the SET button.
button.
Various Functions
z Sounds recorded with the movies and
Registering [Start-up Sound], [Shutter Sound], sound memo function cannot be added as
[Operation Sound], and [Selftimer Sound] My Camera settings (p. 56, 95).
z When you register new My Camera
6 Select (Record) settings, the previously registered settings
using the or are erased.
button and press
the SET button.
z Recording starts.
z Recording stops when
the time is exceeded (p. 120).
119
Various Functions
Data that can be Registered as My • Recording Time

Camera Settings 11.025 kHz 8.000 kHz
My Camera settings should conform to the below Start-up
1.0 sec. or less 1.3 sec. or less
data types. However, memory card images shot Sound
with this camera can be registered as My Camera Operation
settings regardless of the below data types. 0.3 sec. or less 0.4 sec. or less
Sound
(excluding sounds recorded as a movie or with the Selftimer
sound memo function (p. 95)) 2.0 sec. or less 2.0 sec. or less
Sound
z Start-up Image Shutter
0.3 sec. or less 0.4 sec. or less
• Compression JPEG (baseline JPEG) Sound
Method Any data types other than those described above cannot
• Sampling Rate 4:2:0 or 4:2:2 be used with this camera.
• Dimensions 320 x 240 pixels
An example of this function is to record “Say
• Data Size 20 KB or less Cheese” as a self-timer sound so the camera will
z Start-up, Operation, Self-timer and Shutter play back this sound 2 seconds before the photo is
Sounds taken. You could also record cheerful music to
• Compression WAVE (monaural) bring out the natural smiles of your subjects, or so
Method they can strike a pose fitting the music. In these
ways, you can customize your camera by creating
• Quantization Bits 8 bit and adding new My Camera settings.
• Sampling Frequency 11.025 kHz or 8.000 kHz
See the supplied Software Starter Guide for more
information on creating and adding to the My
Camera data.
120
List of Messages
The following messages may appear on the LCD monitor.
z For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
The camera is recording image data to the memory card.
Busy...
The playback mode is running.
No memory card You turned on the power without a memory card installed.
You attempted to shoot with no memory card installed, or attempted to attach a sound
Cannot record !
memo to a movie.
Memory card error Memory card has experienced an anomaly.
Memory card full Memory card is too full to accommodate more images or print settings.
Card locked ! The SD card (sold separately) is write-protected.
The image could not be created because there is an image with the same name as the
directory that the camera is attempting to create, or the highest possible file number has
Naming error ! already been reached. In the [Set up] menu, please set [File No. Reset] to [On]. After
you save all the images you wish to retain onto a computer, format the memory card
(p. 19). Please note that formatting will erase all the existing images and other data.
List of Messages
Battery charge is insufficient to operate the camera. Replace both batteries at the same
Change the batteries time with new AA-size alkaline batteries (p. 15) or fully recharged Canon NiMH
batteries.
No image No images recorded on memory card.
You attempted to play back an image larger than 4064 x 3048 pixels or with a large data
Image too large
size.
Incompatible JPEG
You attempted to play back an incompatible JPEG image.
format
Corrupted data You attempted to play back an image with corrupted data.
121
List of Messages
RAW You attempted to play back a RAW image.

You attempted to play back an image that was recorded in a special data type
Unidentified Image (proprietary data type used by the camera of another manufacturer, etc.) or a movie
recorded by another camera.
You attempted to magnify an image recorded in a different camera or data type, an
Cannot magnify !
image edited with a computer, or a movie.
You attempted to rotate an image recorded in a different camera or data type, an image
Cannot rotate
edited with a computer, or a movie.
Incompatible WAVE A sound memo cannot be added to this image since the data type of the existing sound
format memo is incorrect.
Cannot register this You attempted to register an image recorded in a different camera or a movie as a start-
image ! up image.
Protected ! You attempted to erase a protected image or movie.
Too many images have been marked for printing or transferring. Cannot process any
Too many marks
more.
Unselectable image You attempted to set the print settings for a non-JPEG image.
Cannot complete ! Could not save the print or transfer settings.
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or play
back. If the same message recurs frequently, the camera may be damaged. Note the
error number [xx] and take the camera to a Customer Support Help Desk. If this
Exx
message appears immediately after you have taken a shot, the camera may not have
shot the image. Switch to the Playback mode and check whether the image was
actually recorded.
122
Troubleshooting
Problem Cause Solution
The camera will not Power is not turned on. z Press the Power button for a few moments.
operate Memory card slot cover or battery z Be sure the cover is closed securely.
cover is open.
Batteries are loaded in the wrong z Reload the batteries in the correct direction.
direction.
Batteries are depleted. z Replace with unused alkaline or fully
recharged batteries (two AA-size batteries).
z Use an AC Adapter Kit ACK800 (sold
separately).
Batteries are not the right type. z Use only unused AA-size alkaline batteries or
Canon AA-size NiMH batteries. (For
information about alkaline batteries, see
Proper Battery Handling (p. 16).)
Poor contact between camera and z Wipe the battery terminals with a clean dry
battery terminals. cloth.
Troubleshooting
z Reload the batteries several times.
The camera will not Camera is in Playback mode. z Change to the Shooting mode.
record Flash is charging. z Wait until the flash charges. You can press
the shutter button when the upper indicator
lights orange.
123
Troubleshooting
The camera will not Memory card is full. z Insert a new memory card.
record z If required, download the images to a
computer and erase them from the memory
card to make space.
Memory card is not formatted z Format the memory card. (See Formatting
correctly. Memory Cards (p. 19).)
z If reformatting does not work, the memory
card logic circuits may be damaged. Contact
the nearest Canon Customer Help Desk.
The SD card (sold separately) is z Slide the write protect tab of the SD card
write-protected. upward.
Cannot play back You attempted to play back images z Computer images that cannot be played back
shot with another camera or images will playback if they are added to the camera
edited with a computer. using the bundled software program
ZoomBrowser EX or ImageBrowser. See the
ZoomBrowser EX/ImageBrowser Software
User Guide (PDF).
File name was changed with a z Set the file name or file number according to the
computer or file location was Design rule for Camera File system standards.
changed. (See About File and Folder Numbers (p. 116).)
Lens will not retract Battery cover or memory card slot z Close the memory card slot cover or battery
cover opened with camera on. cover, then turn off the camera.
Battery cover or memory card slot z Close the memory card slot cover or battery
cover opened while recording to the cover, then turn off the camera.
memory card (warning signal
sounds).
124
Troubleshooting
Batteries consumed Batteries are not the right type. z Use only unused AA-size alkaline batteries or
quickly Canon AA-size NiMH batteries. (For
information about alkaline batteries, see
Proper Battery Handling (p. 16).)
Battery capacity drops due to low z If shooting in a cold area, keep the batteries
ambient temperatures. warm (by placing them in an inner pocket,
etc.) until ready to use them.
Battery terminals are dirty. z Wipe them well with a dry cloth before use.
z Reload the batteries several times.
Batteries have not been used for z If using rechargeable batteries: Performance
over a year. should return to normal after several charging
cycles.
If using rechargeable batteries: z Replace both batteries with new ones.
Battery life exceeded.
If using Batteries were placed in the charger z Put batteries back into the charger in the
rechargeable in the wrong direction. correct direction.
Troubleshooting
batteries: Batteries Poor electrical contact, between z Be sure to set batteries firmly into the charger.
do not charge in
separately sold batteries and the charger. z Be sure that the power cord is firmly
battery charger connected to the charger, and is firmly
plugged in to the power outlet.
Battery terminals are dirty. z Wipe them well with a dry cloth before
charging.
Battery life exceeded. z Replace both batteries with new ones.
125
Troubleshooting
Sounds come from The camera’s vertical and horizontal z The mechanism for detecting the camera’s
the camera interior orientation has changed. orientation is functioning. This is not a
malfunction.
Image is blurred or Camera moved z Hold the camera steady while pressing the
out of focus shutter button.
Autofocus function hampered by z Be careful not to block the AF-assist beam
obstruction to AF-assist beam. with fingers or other items.
The AF-assist beam is set to [Off]. z Set the [AF-assist beam] to [On] (p. 69).
Subject out of focal range. z Ensure that there is at least 45 cm (1.5 ft.)
between the camera lens and subject.
z Use the Macro mode to shoot close-ups
between 5 and 45 cm (2.0 in. to 1.5 ft.) from
the lens when set to wide angle and between
30 to 45 cm (11.8 in. to 1.5 ft.) when set to
telephoto.
Subject is hard to focus on. z Use the focus lock or the manual focus to
shoot the image. (See Shooting Hard-to-
Focus Subjects (p. 90).)
126
Troubleshooting
Subject in recorded Insufficient light for shooting. z Set the flash on.
image is too dark Subject is dark in comparison to the z Set the exposure compensation to a positive
background. (+) value or use the spot metering function.
Subject is too far for flash to reach. z When the flash is used, the distance between
lens and subject should not exceed 3.5 m
(11.5 ft.) at wide angle and 2.2 m (7.2 ft.) at
telephoto.
z Raise the ISO sensitivity and then shoot. (See
Changing the ISO Speed (p. 87).)
Subject in recorded Subject is too close causing flash to z When the flash is used, the distance between
image is too bright be too bright. lens and subject should be no less than
45 cm (1.5 ft.).
Subject is bright in comparison to z Set the exposure compensation to a negative
the background (–) value or use the spot metering function.
Light is shining directly or reflected z Adjust the camera angle.
off subject into the camera.
Troubleshooting
Flash is set to On z Set the flash to any other mode except On.
A vertical bar of light Subject is too bright. z This is a normal occurrence in devices
(red, purple) containing CCDs and does not constitute a
appears on the LCD malfunction. (This red bar of light will not be
monitor recorded when shooting still photos, but it will
be recorded when shooting movies.)
127
Troubleshooting
White dots or white Light from the flash has reflected off z This is a phenomenon that occurs with digital
asterisks appear on dust particles or insects in the air. cameras and does not constitute a
the image This occurs more frequently in the malfunction.
following conditions:
- When shooting at the wide angle
end.
- When shooting with a high
aperture value in the aperture-
priority AE mode.
Flash will not fire Flash is set to Off z Set the flash to On.
Images are not Incorrect video system setting. z Set the video system to the appropriate
appearing correctly setting, NTSC or PAL, for your TV (p. 115).
on a TV screen Shooting mode set to (Stitch z The output will not appear on a TV monitor in
Assist). (Stitch Assist) mode. Shoot in a different
shooting mode.
Zoom does not Zoom lever was pressed while z Operate the zoom before shooting in Movie
operate shooting in Movie mode. mode.
Reading images Currently used memory card was z Use a memory card formatted in your camera.
from memory card is formatted in another device. See Formatting Memory Cards (p. 19).
slow
Recording images
to memory card
takes a long time
128
Appendix
Using the Power Kits (Sold Separately) Although four batteries are supplied with the
Battery and Charger Kit CBK4-200, this
Using Rechargeable Batteries camera requires two batteries.
(Battery and Charger Kit CBK4-200)

z This charger can be used only to charge
This kit includes a battery charger and four Canon AA-size NiMH batteries NB-2AH.
rechargeable AA-size NiMH (nickel metal hydride) Please do not attempt to charge NB-2AH
batteries. Charge batteries as shown below. batteries in any other type of charger.
z Never mix new batteries together with
To a power To a power batteries that have been used in other
outlet outlet devices.
z When recharging batteries from the
Charge Charge camera, always recharge both of them at
Indicator Indicator the same time.
z Do not mix batteries with different purchase
dates or different charge states.
z Do not attempt to recharge fully charged
batteries, as doing so may reduce or impair
battery performance. Also, do not charge
Charging four Charging two batteries for more than 24 consecutive
batteries batteries hours.
Appendix
Two batteries can z Do not recharge batteries in enclosed areas
be charged instead that tend to retain heat.
of four. z Repeatedly recharging batteries before they
become fully depleted may cause batteries
The charge indicator blinks while charging, then
to lose capacity. Do not recharge the
remains lit when charging is finished. batteries until the LCD monitor displays the
“Change the batteries” message.
129
Appendix
z Wipe the battery terminals well with a dry z Since storing fully charged batteries for long
cloth in the following situations, as the periods of time (about 1 year) can shorten
terminals may be soiled with oil from one’s their lifecycle or affect performance, you are
skin or other dirt: recommended to use the batteries in the
- If the battery usage time has considerably camera until they are completely
diminished discharged and to store them at normal
- If the number of recordable images has temperature (0 to 30°C/32 to 90°F) or less.
considerably diminished If you do not use the batteries for long
- When charging the batteries (insert and periods of time, charge them fully and
remove the batteries two or three times discharge them fully in the camera at least
before charging) once a year before returning them to
- When charging completes in a matter of a storage.
few minutes (the battery charger indicator z If battery usage time is considerably low
remains lit) despite their terminals being wiped and the
z You may not be able to fully charge the battery charger’s indicator remaining lit, it is
batteries due to their specifications right possible that the batteries have reached the
after purchase or after long periods of non- end of their lifespan. Switch to different,
use. If this happens, use the batteries until unused batteries. If you are purchasing new
their charge is depleted before charging batteries, look for Canon’s AA-size NiMH
them again. After doing this several times, batteries.
battery performance will be restored. z Leaving batteries in the camera or charger
may damage it causing battery leakage.
Remove batteries from the camera or
charger and store in a dry cool location
when not in use.
130
Appendix
Using the AC Adapter Kit ACK800

z It takes approximately 110 minutes when
two batteries are loaded one at each end of Use of AC Adapter Kit ACK800 (sold separately) is
the charger and 250 minutes with four for recommended when using the camera
the charger to fully recharge them (as continuously for prolonged periods of time and
determined by testing at Canon facilities). when connecting to a computer.
Please do not charge batteries in areas
where the temperature is outside the range
of 0 to 35°C (32 to 95°F). Be sure that the camera is turned off before
z Charging time varies according to ambient connecting or disconnecting the compact
temperature and to the batteries’ initial power adapter.
charge state.
z The battery charger may emit noise while
charging. This is not a malfunction.
z Battery/Charger Kit CBK100 can also be
1 Connect the power cord to the
used. Use Canon AA-size batteries NB- compact power adapter, and then
1AH with the charger included in the CBK plug the other end into the power
100 kit. outlet.
To a power outlet
Appendix
131
Appendix
2 Open the terminal cover, and Using the Lenses (Sold Separately)
connect the compact power
The camera supports use of the separately
adapter’s DC plug into the sold Wide Converter WC-DC52, Tele-
camera’s DC IN terminal. converter TC-DC52A and Close-up Lens
250D (52 mm). In order to attach any of these
lenses, you also need to use the separately
sold Conversion Lens Adapter LA-DC52F.
z When attaching the wide converter, tele-

converter or close-up lens, be sure to
screw it on securely. If they come loose
they may fall from the lens adapter,
z Please unplug the adapter from the power posing risk of injury from shattered glass.
outlet when you have finished using the
z Never look into the sun or into strong
camera.
light through the wide converter, tele-
converter or the close-up lens, as this
Use of an AC adapter kit other than AC can result in blindness or impairment of
Adapter Kit ACK800 may cause a malfunction vision.
in the camera or AC adapter kit.
132
Appendix
Close-Up Lens 250D (52 mm)

z If you use the flash when shooting with
these attachments, the outer area of the This lens makes it easy to take macro shots. With
recorded image (especially lower right the camera set to Macro mode, you can use this
corner) will come out relatively dark. option to shoot subjects that are 4 to 17 cm (1.6 to
z When using the tele-converter, please set 6.7 in.) away from the front of the lens at the wide
the focal length to the telephoto end. At
other zoom settings, the image will appear
angle end, and 14 to 17 cm (5.5 to 6.7 in.) at the
as if its corners have been cut off. telephoto end.
z When using the wide converter, please set
the camera to the wide angle end. It is not possible to attach a lens hood or filter
z If you use the viewfinder for shooting, a to the wide converter or tele-converter.
portion of the view will be blocked by these
attachments.
Shooting Ranges in Macro Mode
Wide Converter WC-DC52 Distance between
Use this converter for taking wide-angle shots. The Front of the Lens Field Coverage
and Subject
wide converter changes the focal length of the
camera body’s lens by a factor of 0.7x (the thread 14 cm 39 x 29 mm
diameter is 52 mm.). Telephoto (5.5 in.) (1.5 x 1.1 in.)
Appendix
End 17 cm 46 x 34 mm
Tele-converter TC-DC52A (6.7 in.) (1.8 x 1.3 in.)
This 52 mm-threaded diameter magnifying 4 cm 56 x 42 mm
conversion lens is for taking telephoto shots. The Wide Angle (1.6 in.) (2.2 x 1.7 in.)
lens changes the focal length of the camera body’s End 17 cm 165 x 124 mm
lens by a factor of 1.75x. (6.7 in.) (6.5 x 4.9 in.)
133
Appendix
Conversion Lens Adapter LA-DC52F 3 When the mark on the camera

This separately sold adapter is required for and the mark on the ring are
attaching the wide converter, tele-converter and aligned, lift off the ring.
close-up lens (52 mm thread diameter).
Attaching a Lens
1 Be sure that the camera is turned

off.
2 Press the ring release button and
hold it down, and turn the ring in
the direction of the arrow. 4 Align the z mark on the conversion
lens adapter with the mark on
the camera, and turn the adapter in
the direction of the arrows as far
Ring as the { mark on the camera.
Ring Release Button
134
Appendix
z To remove the conversion lens adapter, turn

the adapter in the opposite direction with z Completely remove all dust and dirt from
holding down the ring release button. conversion lenses with a lens blower brush
before use. The camera may focus on any
5 Set the lens on the adapter, and dirt that remains.
z Exercise due caution when handling the
attach it securely by turning it in lenses since it is easy to dirty them with
the indicated direction. finger prints.
z Be careful not to drop the camera or
adapter when removing the ring.
z When shooting with these attachments,
please use the LCD monitor to compose
your shots. The attachments block part of
the view through the viewfinder, and the
area shown in the viewfinder does not
match the area of the shot that is actually
recorded. Also, the angle of view cannot be
confirmed in the viewfinder.
z You should not shoot images in mode
when using these attachments. Although it
is possible to select this mode at the
camera, the PhotoStitch software will not be
Appendix
able to stitch the images together at the
computer.
135
Appendix
Using an Externally Mounted z The High-Power Flash will not fire when the
Flash (Sold Separately) shooting mode dial is set to M.
z The flash charge time will lengthen as the
High Power Flash HF-DC1 battery charge gets weaker. Always set the
power/mode switch to [OFF] when you
This is an attachable supplementary flash. finish using the flash.
Photographic subjects that are too distant for the z Be careful not to touch the flash window or
built-in flash to illuminate may be captured using sensor windows with your fingers while the
the High-Power Flash. Affix the High-Power Flash flash is in use.
to the camera using the bracket as shown below. z In outdoor settings in the daylight, the flash
may not detect illumination from the
Please also refer to the user’s manual supplied camera’s built-in flash and may not fire.
with the flash. z The flash may fire if another flash is being
used in close proximity.
z The flash may not fire if there are no
reflective items in its metering field.
z For continuous shooting, although the flash
fires for the first shot, it does not fire for
subsequent shots.
z If the battery usage time has considerably
diminished, wipe the battery terminals well
with a dry cloth as the terminals may be
soiled with oil from one’s skin or other dirt.
Tripod
Sockets
Bracket (supplied
with the flash)
136
Appendix
z If the battery is used in cold regions (0°C/ Replacing the Date Battery
32°F or lower), you are recommended to
carry a spare lithium battery (CR123A or If the Date/Time menu appears when the camera
DL123). Keep the spare battery warm in power is turned on, the date battery charge is low
your pocket until immediately before using and the date and time settings have been lost.
it, and exchange it frequently with the Please purchase a lithium coin battery (CR1220)
battery in the flash. and replace it as follows.
z Remove the battery from the flash and store
it in a dry and cool location if you will not Please note that the first date battery may
use it for extended periods. Leaving it in the appear to expire relatively quickly after you
flash could lead to the battery leaking and purchase the camera. This is because it is
damaging the flash. installed in the camera at the point of
z Fasten the attachment screws securely so manufacture, not when you make the
that they do not loosen. Failure to do so purchase.
may lead to the dropping of the camera and
flash resulting in damage to both.
Be particularly careful to keep the date
batteries out of the reach of children. Seek
z Before affixing the bracket to the flash, medical assistance immediately if a child
check that the lithium battery (CR123A or swallows a battery since corrosive battery
DL123) is installed. fluids could damage the stomach or intestinal
z To illuminate the subjects properly, install
Appendix
wall.
the flash so that it is up against the side of
the camera and parallel with the camera’s
front panel.
z A tripod can be used even when the flash is 1 Confirm that the camera is turned
attached. off.
137
Appendix
2 Open the terminal cover and use 4 Insert a new battery with the (–)
your finger nail to pull out the side facing up.
battery holder.
5 Replace the battery holder back
and close the terminal cover.
6 When the Date/Time menu
appears, set the date and time
(p. 22).
After purchasing the camera and turning on

the power for the first time, although the Date/
Time menu will appear, you do not need to
3 Pull open the battery holder in the replace the date battery.
direction indicated by the arrow
(c). Remove the battery by pulling
it up in the direction indicated by If you ever dispose of your camera, first
remove the date battery for recycling
the arrow (d). according to the recycling system of your Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen
d country. maar inleveren als KCA
(–) Side
138
Appendix
Camera Care and Maintenance Never use water, paint thinner, benzene, or
Use the following procedures to clean the detergents to clean the camera, as these may
cause damage or deformation.
camera body, lens, viewfinder, LCD monitor
and other parts.
Camera : Wipe the camera body with a soft cloth
Body or an eyeglass lens wiper.
Lens : First use a lens blower brush to remove
dust and dirt, then remove any
remaining dirt by wiping the lens lightly
with a soft cloth.
z Never use synthetic cleansers on the
camera body or lens. If dirt remains,
contact the closest Canon Customer
Support Help Desk as listed on the
separate Canon Customer Support
leaflet.
LCD : Use a lens blower brush to remove dust
Monitor, and dirt. If necessary, gently wipe the
Viewfinder viewfinder and LCD monitor with a soft
Appendix
cloth or an eyeglass lens wiper to
remove stubborn dirt.
z Never rub or press forcefully on the
LCD monitor. These actions may
damage it or lead to other problems.
139
Specifications
All data is based on Canon’s standard testing methods. Subject to change without notice.
PowerShot A520/PowerShot A510
PowerShot A520: Approx. 4.0 million
Camera Effective Pixels
PowerShot A510: Approx. 3.2 million
PowerShot A520: 1/2.5-inch CCD (Total number of pixels: Approx. 4.2 million)
Image Sensor
PowerShot A510: 1/2.5-inch CCD (Total number of pixels: Approx. 3.3 million)
5.8 (W) – 23.2 (T) mm (35mm film equivalent: 35 (W) – 140 (T) mm)
Lens
f/2.6 (W) – f/5.5 (T)
PowerShot A520: Approx. 3.6x (Up to approx. 14x in combination with the
optical zoom)
Digital Zoom
PowerShot A510: Approx. 3.2x (Up to approx. 13x in combination with the
optical zoom)
Optical Viewfinder Real-image zoom viewfinder
1.8-inch, low-temperature polycrystalline silicon TFT color LCD, approx.
LCD Monitor
115,000 pixels
TTL autofocus
AF System Focus lock and Manual focus are available
9-point AiAF/1-point AF (fixed to center)
Normal: 45 cm (1.5 ft.) – infinity
Shooting Distance
Macro: 5 – 45 cm (2.0 in. – 1.5 ft.) (W)/30 – 45 cm (11.8 in. – 1.5 ft.) (T)
(from the front of the lens)
Manual Focus: 5 cm (2.0 in.) – infinity (W)/30 cm (11.8 in.) – infinity (T)
Shutter Mechanical shutter + electronic shutter
(W): Wide angle (T): Telephoto
140
Specifications
15 – 1/2000 sec.
Shutter Speeds z The shutter speed varies according to the shooting modes.
z Slow shutter speeds of 1.3 sec. or slower operate with noise reduction.
Metering System Evaluative, Center-weighted average or Spot (Center)
Program AE, Shutter-priority AE, Aperture-priority AE, Manual exposure
Exposure Control System
control
Exposure Compensation ±2 stops in 1/3-stop increments
Sensitivity Auto*, ISO 50/100/200/400 equivalent
* Camera automatically sets the optimal speed.
Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or
White Balance
Fluorescent H) or custom
Built-in Flash Auto*, on*, off
* Red-eye reduction available.
Normal: 45 cm – 3.5 m (1.5 – 11.5 ft.) (W), 45 cm – 2.2 m (1.5 – 7.2 ft.) (T)
Flash Range
Macro: 30 – 45 cm (11.8 in. – 1.5 ft.) (W/T) (when sensitivity is set to Auto)
Auto
Creative zone: Program, Shutter-speed priority, Aperture priority, Manual
Shooting Modes Image zone: Portrait, Landscape, Night scene, Fast shutter, Slow shutter,
Appendix
Special Scene (Foliage, Snow, Beach, Fireworks, Underwater, Indoor, Kids &
Pets and Night Snapshot), Stitch assist and Movie
PowerShot A520: Approx 1.9 shots/sec.
Continuous Shooting PowerShot A510: Approx 2.3 shots/sec.
(Large/Fine mode, LCD monitor off).
141
Specifications
Activates shutter after an approx. 10-sec./2-sec. delay. Can be set using the
Self-timer
custom settings.
Available (USB connection only. Exclusive software program is included in the
PC-controlled Shooting
camera kit.)
Recording Media SD memory card/MultiMediaCard
File Format Design rule for camera file system and DPOF compliant
Still images: Exif 2.2 (JPEG)*1,
Data Type
Movies: AVI (Image data: Motion JPEG; Audio data: WAVE (monaural))
Compression Superfine, Fine, Normal
Large: PowerShot A520: 2272 x 1704 pixels
PowerShot A510: 2048 x 1536 pixels
Still Images Medium 1: 1600 x 1200 pixels
Number of Medium 2: 1024 x 768 pixels
Recording Small: 640 x 480 pixels
Pixels
640 x 480 pixels (30 sec.)/320 x 240 pixels (3 min.)/160 x 120 pixels (3 min.)
Movies : 10 frames/sec., : 15 frames/sec.
The data in parentheses refer to the maximum movie length per shooting.
Single (histogram displayable), Index (9 thumbnail images), Magnified
Playback Modes (approx. 10x (max.) in LCD monitor, advance or reverse through magnified
images possible), Auto play, Sound memos (up to 60 sec.) or Movie.
Canon Direct Print and Bubble Jet Direct compatible, and PictBridge
Direct Print
compliant
142
Specifications
21 languages available for menus and messages (English, German, French,

Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Simplified
Display Languages
Chinese, Russian, Portuguese, Greek, Polish, Czech, Hungarian, Turkish,
Traditional Chinese, Korean and Japanese)
The start-up image, start-up sound, operation sound, self-timer sound and
shutter sound can be customized using the following methods:
My Camera Settings
1. Using the images and sounds recorded on a camera.
2. Using downloaded data from your computer using the supplied software.
USB (mini-B, PTP [Picture Transfer Protocol])
Interface
Audio/Video output (NTSC or PAL selectable, monaural audio)
AA-size alkaline batteries (included in the camera kit)
Power Source AA-size rechargeable NiMH batteries NB4-200 (sold separately)
AC Adapter Kit ACK800 (sold separately)
Operating Temperatures 0 – 40°C (32 – 104°F)
Operating Humidity 10 – 90%
Dimensions 90.7 x 64.0 x 38.4 mm (3.6 x 2.5 x 1.5 in.) (excluding protrusions)
Weight Approx. 180 g (6.3 oz.) (camera body only)
*1 This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication
Appendix
between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the
time of shooting is used and optimized, yielding extremely high quality prints.
143
Specifications
Battery Performance Test Conditions

Shooting: Normal temperature (23°C ±2°C/73°F
±3.6°F), normal relative humidity (50%
Number of Shots ±20%), alternating wide angle end and
telephoto end shots at 30 second
LCD intervals with the flash fired once every
Monitor Playback two shots and the camera power turned
LCD
ON Time
(Based on
Monitor off after every tenth shot. Power is left
Off off for a sufficient amount of time*, then
the CIPA
standard) the power is turned back on and the
testing procedure is repeated.
AA Alkaline • The included memory card is used.
Batteries Approx. Approx. Approx. * Until the battery returns to normal
(included with 80 shots 240 shots 180 min. temperature
the camera) Playback: Normal temperature (23°C ±2°C/73°F
AA NiMH ±3.6°F), normal relative humidity (50%
Batteries Approx. Approx. Approx. ±20%), continuous playback at 3
(NB-2AH (fully 300 shots 800 shots 300 min. seconds per image.
charged))
z For information on handling batteries, see
* The actual figures will vary according to the shooting Proper Battery Handling (p. 16).
condition and settings.
144
Specifications
Memory Cards and Estimated Capacities (Recordable Images)

Memory card included with the camera
PowerShot A520 PowerShot A510
MMC- SDC- SDC- MMC- SDC- SDC-
16M 128M 512MSH 16M 128M 512MSH
7 61 237 9 76 295
L (Large) L (Large)
13 109 425 16 136 529
2272 x 1704 pixels 2048 x 1536 pixels
26 216 838 33 269 1041
14 121 471 14 121 471
M1 (Medium 1) M1 (Medium 1)
26 216 838 26 216 838
1600 x 1200 pixels 1600 x 1200 pixels
50 411 1589 50 411 1589
25 211 816 25 211 816
M2 (Medium 2) M2 (Medium 2)
45 372 1438 45 372 1438
1024 x 768 pixels 1024 x 768 pixels
80 651 2517 80 651 2517
56 460 1777 56 460 1777
S (Small) S (Small)
Appendix
87 711 2746 87 711 2746
640 x 480 pixels 640 x 480 pixels
138 1117 4316 138 1117 4316
640 x 480 pixels 22 sec. 3 min. 1 sec. 11 min. 42 sec. 640 x 480 pixels 22 sec. 3 min. 1 sec. 11 min. 42 sec.
Movie
Movie
320 x 240 pixels 43 sec. 5 min. 55 sec. 22 min. 53 sec. 320 x 240 pixels 43 sec. 5 min. 55 sec. 22 min. 53 sec.
160 x 120 pixels 1 min. 47 sec. 14 min. 29 sec. 55 min. 57 sec. 160 x 120 pixels 1 min. 47 sec. 14 min. 29 sec. 55 min. 57 sec.
145
Specifications
z Some memory cards are not sold in some Image Data Size (Estimated)
regions.
z The maximum movie clip length is : 30 sec.,
: 3 min. or : 3 min.. The times shown are PowerShot A520:
2002 KB 1116 KB 556 KB
the maximum continuous recording times. 2272 x 1704 pixels
L
* When using a 128 MB or higher capacity memory card. PowerShot A510:
z (Superfine), (Fine) and (Normal) indicate 1602 KB 893 KB 445 KB
2048 x 1536 pixels
the compression setting. M1 1600 x 1200 pixels 1002 KB 558 KB 278 KB
z L (Large), M1 (Medium 1), M2 (Medium 2), S
(Small), , and indicate the recording M2 1024 x 768 pixels 570 KB 320 KB 170 KB
resolution. S 640 x 480 pixels 249 KB 150 KB 84 KB
640 x 480 pixels 660 KB/sec.
Movie
146
Specifications
NiMH Battery NB-2AH Battery Charger CB-4AH/CB-4AHE

Supplied with the separately sold NiMH Battery Supplied with the separately sold Battery and
NB4-200 set and the Battery and Charger Kit Charger Kit CBK4-200.
CBK4-200. 100 – 240 V AC (50/60 Hz),
Rated Input
Rechargeable nickel metal 10 W
Type
hydride battery Rated Output 565 mA*1, 1275 mA*2
Nominal Voltage 1.2 V DC Approx. 250 min.*1,
Charging Time
Typical Capacity 2300 mAh (min.: 2150 mAh) Approx. 110 min.*2
Cycle Life Approx. 300 times Operating
0 – 35°C (32 – 95°F)
Operating Temperatures
0 – 35°C (32 – 95°F) 65.0 x 105.0 x 27.5 mm
Temperatures Dimensions
Diameter: 14.5 mm (0.6 in.) (2.6 x 4.1 x 1.1 in.)
Dimensions CB-4AH: Approx. 95 g (3.4 oz.)
Length: 50 mm (2.0 in.)
Weight Approx. 29 g (1.0 oz.) Weight CB-4AHE: Approx. 97 g (3.4 oz.)
(body only)
*1 To charge four NB-2AH NiMH batteries
*2 To charge two NB-2AH NiMH batteries loaded one at
each end of the battery charger
Appendix
147
Specifications
Compact Power Adapter CA-PS800 SD memory Card

Supplied with the separately sold AC Adapter Kit Interface conforming to SD
ACK800. Interface
memory card standards.
100 – 240 V AC (50/60 Hz), 32.0 x 24.0 x 2.1 mm
Rated Input Dimensions
16 VA (100 V) – 26 VA (240 V) (1.3 x 0.9 x 0.08 in.)
Rated Output DC 3.15 V DC/2 A Weight Approx. 2 g (0.07 oz.)
Operating
Temperatures
0 – 40°C (32 – 104°F) MultiMediaCard
42.5 x 104.0 x 31.4 mm Compatible with MultiMediaCard
Dimensions Interface
(1.7 x 4.1 x 1.2 in.) standards.
Approx. 180 g (6.3 oz.) 32.0 x 24.0 x 1.4 mm
Weight Dimensions
(body only) (1.3 x 0.9 x 0.06 in.)
Weight Approx. 1.5 g (0.05 oz.)
148
Specifications
Wide Converter WC-DC52 (Sold Close-up Lens 250D 52 mm (Sold

Separately) Separately)
Approx. 0.7x (35 mm film Focal Length 250 mm
Magnification equivalent at wide angle end: 4 – 17 cm (1.6 – 6.7 in.) (W)
approx. 24.5 mm) Focusing Range
14 – 17 cm (5.5 – 6.7 in.) (T)
(from front of lens)
Approx. 21 cm (8.3 in.) – infinity (when using the Macro mode)*1
(at wide angle end)*1 Thread Diameter 52 mm standard filter thread*2
Focusing Range
Approx. 1 – 21 cm (0.4 – 8.3 in.)
(from front of lens) Diameter: 54 mm (2.1 in.)
(at wide angle end with using the Dimensions
Macro mode)*1 Length: 10.2 mm (0.4 in.)
Thread Diameter 52 mm standard filter thread*2 Weight Approx. 55 g (1.9 oz.)
Diameter: 58.0 mm (2.3 in.) *1 When mounted on PowerShot A510.
Dimensions *2 Conversion Lens Adapter LA-DC52F is required when
Length: 30.5 mm (2.2 in.)
mounted on PowerShot A510.
Weight Approx. 74 g (2.6 oz.)
Appendix
149
Specifications
Tele-converter TC-DC52A (Sold Conversion Lens Adapter LA-DC52F

Separately) (Sold Separately)
Approx. 1.75x (35mm film Thread Diameter 52 mm standard filter thread
Focal Length equivalent at telephoto end: Diameter: 55.6 mm (2.2 in.)
approx. 245 mm) Dimensions
Focusing Range Approx. 1.4 m (Approx. 4.6 ft.) – Weight Approx. 14 g (0.5 oz.)
(from front of lens) infinity (at telephoto end)*1
Thread Diameter 52 mm standard filter thread*2
Diameter: 55.2 mm (2.2 in.)
Dimensions
Weight Approx. 86 g (3.0 oz.)
*1 When mounted on PowerShot A510.
*2 Conversion Lens Adapter LA-DC52F is required when
mounted on PowerShot A510.
150
Photo Tips and Information
This section offers photography tips. z Advanced Technique for the Macro Mode
(p. 44)
z Tip for Using the Self-timer (p. 45) Macro mode can make unique images when
Normally, the camera shakes a little when you used with the zoom function. For example,
press the shutter button. shooting a flower at maximum wide angle in
Setting the self-timer to delays the shutter Macro mode allows the camera to bring both the
release for two seconds and allows the camera flower and the background into focus. However,
to stop shaking, thus preventing a blurred image. shooting at maximum telephoto can throw the
Even better results can be obtained by placing background out of focus to make the flower stand
the camera on a fixed, stable surface or by fixing out.
the camera onto a tripod.
z To Shoot a Night Scene without a Subject

(p. 42)
To shot a night scene without any subject in the
foreground, set the flash to .
(A night scene usually consists of light sources in
the night. When shooting with the flash, the light Macro with the wide Macro with the
of the flash will washout these lights, so it is angle zoom telephoto zoom
better to turn the flash off.)
This mode uses a slow shutter speed so always z How to Adjust the Exposure (p. 83)
Appendix
use a tripod to prevent camera shake. This camera automatically adjusts the exposure
to shoot images with the optimal brightness.
However, recorded images may sometimes be
brighter or darker than the actual image
depending on the shooting conditions. If this
happens, adjust the exposure compensation
manually.
151
Photo Tips and Information
Underexposure z ISO Speed (p. 87)

The whole recorded image The ISO speed is the numeric representation of
is dark, which makes white the camera’s sensitivity to light. The higher the
elements of the image ISO speed, the higher the sensitivity. A high ISO
appear gray. Shooting bright speed allows you to shoot images in dark indoor
subjects or in backlit or outdoor conditions without a flash and also
conditions may cause the helps prevent blurred images due to camera
image to be underexposed. Adjust the exposure shake. This is convenient when shooting images
compensation towards the + end. in places where flash photography is prohibited.
The ISO speed setting makes full use of the
Optimal Exposure available light, resulting in images that convey
the feel of the place they were shot.
Overexposure
The whole recorded image
is bright, which makes black ISO 50 equivalent ISO 400 equivalent
elements of the image
appear gray. Shooting dark
subjects or in dark places
may cause the image to be
overexposed. Adjust the exposure compensation
towards the – end.
152
INDEX
A Continuous Shooting .......................................... 48
Creative Zone .................................................... 76
AC Adapter Kit ..................................................131
AF Frame ...........................................................81 D
Aperture Value ...................................................79 Date/Time .......................................................... 22
Aperture-priority AE ............................................79 Default Settings .......................................... 69 – 74
Auto Mode ..........................................................33 DIGITAL Terminal ...................................... 12, 109
Auto Play ............................................................96 Digital Zoom ....................................................... 47
A/V Out Terminal ..............................................114 Direct Transfer ................................................. 111
B Display Modes ........................................... 24 – 29
DPOF
Batteries
Print Settings ............................................. 100
Battery Cover ...............................................15
Transfer Order ........................................... 104
Handling Precautions ...................................16
Installing .......................................................15 E
Low Status ...................................................17 Erasing
Performance ..............................................144 All Images .................................................... 65
Rechargeable Batteries .............................129 Single Image ................................................ 65
Status ...........................................................17 Exposure
Appendix
Beep .......................................................34, 70, 74
Aperture-priority AE ..................................... 79
C Compensation ............................................. 83
Care ..................................................................139 Shutter-speed Priority AE ............................ 77
Components .......................................................12 F
Compression ......................................................40 Fast Shutter ....................................................... 38
Computer System Requirements .....................107 File Number ..................................................... 115
153
INDEX
Flash ...................................................................42 Close-Up Lens ........................................... 133

Focal Length .............................132, 133, 149, 150 Conversion Lens Adapter .......................... 134
Focus Tele-converter ........................................... 133
Lock .............................................................90 Wide Converter .......................................... 133
Manual .........................................................91 M
Format ................................................................19
Macro Mode ....................................................... 44
H Magnifying Images ............................................. 59
Histogram ...........................................................29 Maintenance .................................................... 139
Manual
I Exposure ..................................................... 83
Image Zone ........................................................38 Focus ........................................................... 91
Index Playback ...................................................60 Shooting Mode ............................................ 80
Indicators ............................................................14 Memory Card ..................................................... 18
Information View .........................................24 – 29 Downloading Images ................................. 113
Interface Cable ...........................................12, 109 Formatting ................................................... 19
ISO Speed ..........................................................87 Installing ...................................................... 18
Recording Capacity ................................... 145
J Slot Cover .................................................... 18
Jump ...................................................................61 Menu
FUNC. .......................................................... 66
L My Camera .................................................. 74
Landscape Mode ................................................38 Play .............................................................. 70
Language ...........................................................23 Rec. ............................................................. 69
LCD Monitor ...............................................24 – 29 Selecting ...................................................... 66
Lens ...................................................................12 Set up .................................................. 70 – 73
154
INDEX
Messages ...............................................121 – 122 Playback

Metering Auto Play ..................................................... 96
Center-Weighted Averaging .........................82 Index Playback ............................................ 60
Evaluative ....................................................82 Jumping ....................................................... 61
Spot ..............................................................82 Magnifying Images ...................................... 59
Microphone .........................................................12 Movies ......................................................... 61
Mode Dial .....................................................38, 76 Rotating ....................................................... 94
Movie Single Image Playback ................................ 58
Editing ..........................................................62 Portrait Mode ..................................................... 38
Playback ......................................................61 Postcard Print Mode .......................................... 54
Shooting .......................................................56 Power On/Off ............................................. 30 – 31
My Camera Power Saving ..................................................... 31
Menu ............................................................74 Power Source .................................................... 30
Registering .................................................118 AC Adapter ................................................ 131
Settings ......................................................118 Rechargeable Batteries ............................. 129
N Printing ............................................................... 98
Print Style .................................................. 103
Night Scene Mode ..............................................38 Selecting Images ............................. 100 – 102
O Print/Share Button ................................ 13, 98, 111
Appendix
Program AE ....................................................... 77
Operation Sound ..........................71, 74, 118, 143
Protect ................................................................ 97
P R
Photo Effect ........................................................88
Recordable Images .......................................... 145
PictBridge compliant printers ..............................98
Red-eye Reduction ............................................ 43
155
INDEX
Resetting the Settings to Default ........................75 Start-up

Resolution ..........................................................40 Image ........................................................... 74
Ring Release Button ..........................................12 Sound .......................................................... 74
Rotate .................................................................94 Stitch Assist Mode ............................................. 49
Strap .................................................................. 13
S
Self-timer ............................................................45
T
Sound ...........................................................74 Telephoto ........................................................... 33
Shooting .......................................................33, 66 Transfer Order
Reviewing an Image ....................................36 Selecting Images ....................................... 104
TV Set ........................................................114 Troubleshooting ..................................... 123 – 128
Shooting Mode .................................................159 V
Dial ...............................................................14
Functions Available ....................................159 Video System ..................................................... 73
Shutter Viewfinder .......................................................... 13
Shutter-speed Priority AE ............................77 Autofocus range .......................................... 35
Sound ...........................................................74 Volume ............................................................... 71
Speed ...........................................................77 W
Shutter Button ....................................................33
WAVE Files .................... 27, 95, 96, 120, 122, 142
Single Image Playback .......................................58
Slow Shutter .......................................................38 White Balance .................................................... 84
Wide angle ......................................................... 33
Sound Memos ....................................................95
Speaker ..............................................................12 Z
Special Scene Mode ..........................................51 Zoom .................................................................. 47
Specifications .........................................140 – 143
156
INDEX
Appendix
157
FCC Notice
(Digital Camera, Model PC1106/PC1107)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The cables with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class
B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian ICES-003.
Réglementation canadienne sur les interférences radio
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
158
Functions Available in Each Shooting Mode
The following chart shows the functions and settings available in each Shooting mode.
Refer-
Function (1) ence
Pages
Large L {* {* {* {* {* {* {* U* – {* {* {* {*
Medium 1 M1 { { { { { { { U – { { { {
40
Medium 2 M2 { { { { { { { U – { { { {
Resolu- Small S { { { { { { { U – { { { {
tion Postcard Print { { { { { { { – – { { { { 54
Movie – – – – – – – – { – – – –
Movie – – – – – – – – {* – – – – 40
Movie – – – – – – – – { – – – –
Superfine { { { { { { { U – { { { {
Compres-
sion
Fine {* {* {* {* {* {* {* U* – {* {* {* {* 40
Normal { { { { { { { U – { { { {
Auto {* {* { {* {* { {* – – { – – –
Appendix
Flash On – { { { { { { U – { { { { 42
Off { { {* { { {* { U* – {* {* {* {*
Red-eye Reduction { { { { { { { U – { { { { 43
Flash Output – – – – – – – – – – – – { 89
AF-assist Beam { { { { { { { U { { { { { 36
*: Default settings {: Available U: Available only for the first image –: Not available
: Setting remains in effect even when the camera is turned off.
159
Refer-
Function (1) ence
Pages
Single Shot {* {* {* {* {* {* {* U* {* {* {* {* {* –
Continuous
Shooting
– { { { { { { – – { { { { 48
Drive Self-timer
Mode (10 sec.)
{ { { { { { { U { { { { {
Self-timer 45
(2 sec.)
{ { { { { { { U { { { { {
Custom { { { { { { { – – { { { {
AF Frame selection(2) {* { { { { { { { { { { { { 81
AF Lock – { { { { { { – { { { { { 90
Manual Focus – { { { { { { – { { { { { 91
Macro Mode { { – { { { { U { { { { { 44
ON { { { { { { { – – { { { {
Digital Zoom 47
OFF {* {* {* {* {* {* {* – – {* {* {* {*
Exposure Compensation – { { { { { { U { { { { – 83
Evaluative { { { { { { { { { {* {* {* {*
Metering Center-Weighted 82
Averaging
– – – – – – – – – { { { {
System
Spot – – – – – – – – – { { { { 82
White Balance(3) –(4) { { { { { –(5) U { { { { { 84
Photo Effect – { { { { { –(5) U { { { { { 88
160
Refer-
Function (1) ence
Pages
ISO Speed –(5) –(5) –(5) –(5) –(5) –(5) –(5) –(5) –(5) { { { {(6) 87
ON {* {* {* {* {* {* {* U* – {* {* {* {*
Auto Rotate 92
OFF { { { { { { { U – { { { {
The default for the settings changed by the menu and button operations can be restored all at once except for [Date/Time], [Lan-
guage] and [Video System] (p. 75).
(1)The default setting of the flash for the [Foliage] and [Fireworks] options is [Off].
The following functions cannot be set in the [Fireworks] mode.
- The [Auto] and [On] setting of the flash
- Red-eye reduction function
- AF-assist beam
- AF frame selection
- Macro mode
- AF lock
- Manual focus
The following functions cannot be set in the [Kids & Pets] mode.
- Macro mode
- AF frame selection
(2)When using the digital zoom, AF frame is set to [Off].
(3)Cannot be adjusted when the photo effect is set to [Sepia] or [B/W].
(4)The white balance is set to [Auto].
Appendix
(5)Settings automatically set by the camera.
(6)ISO [Auto] cannot be selected.
161

Manual Canon

Uploaded by

Copyright:

Available Formats

Manual Canon

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual Canon

Uploaded by

Copyright:

Available Formats

ENGLISH

Camera User Guide

Software Starter Guide Using the Flash

Setting the Shutter Speed ..................77 List of Messages 121

Warning Against Copyright Infringement

Camera Body Temperature

Caution about magnetic fields

Avoid Strong Magnetic Fields

Avoid Condensation Related Problems

If Condensation Forms Inside the Camera

Lens Terminal Cover

SET Button (Flash)/ Button (p. 42)

Preparing the Camera, Basic Function

(Macro)/ MF (Manual Focus)/

Shooting Mode Dial Indicators

Preparing the Camera, Basic Function

4 Close the battery cover.

Proper Battery Handling z Be careful to load the batteries with their

Battery Status Indications

Preparing the Camera, Basic Function

The negative terminal is correctly

Installing the Memory Card To remove the memory card

Formatting Memory Cards

Preparing the Camera, Basic Function

3 Select (Format) z If the camera does not work properly, the

Preparing the Camera, Basic Function

Setting the Date/Time 4 Set the date and

Setting the Language 4 Select a language

Preparing the Camera, Basic Function

Using the LCD Monitor

Icons Displayed in Shooting Mode PowerShot A520:

Preparing the Camera, Basic Function

z A slow shutter speed has likely been selected

Preparing the Camera, Basic Function

Compression p. 40 * Detailed Display is not available

z Please note that image information

Preparing the Camera, Basic Function

Dark image Balanced Bright

Turning the Camera On 1 Press the Power button again to

Power Saving Function z Display Off (only in shooting mode)

Preparing the Camera, Basic Function

Switching between Shooting and Shooting Mode

Shooting Mode When a printer (sold separately) is properly

Shooting with the Viewfinder

AF-assist Beam Reviewing an Image Right after

Using the Mode Dial (Image Zone)

Use this mode when taking Select from 8 scene

Landscape Night Scene Fast Shutter Slow Shutter

1 Turn the shooting Landscape Mode

2 Select L* using 5 Select the

4 Press the SET button.

Using the Flash z You can switch between settings by pressing

z The lower indicator will light yellow when the Self-timer

z Always use the LCD monitor to compose 1 Press the FUNC.

Digital Zoom 4 Press the zoom lever toward .

2 In the [ (Rec.)] 5 Shoot the image.

3 Select [On] using the or

Continuous Shooting 5 Press the shutter button all the

1 Press the FUNC. button.

3 Select using the or button

Printers that Can Be Used with this Camera