Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Aries HWD P

    Uploaded by

    Felipe Dias Araújo
    This document provides specifications for Aries integral dripper lines used for deciduous tree and row crop irrigation. It lists various models of the dripper lines with their dimensions, flow rates, filtration requirements, and maximum working pressures. Key features include large water filtration areas, labyrinth water passages for clogging resistance, and injection molded construction for uniformity. Performance data and packaging information is also included for planning irrigation system layout and parts ordering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aries HWD P

    Uploaded by

    Felipe Dias Araújo
    17 views2 pages
    This document provides specifications for Aries integral dripper lines used for deciduous tree and row crop irrigation. It lists various models of the dripper lines with their dimensions, flow rates, filtration requirements, and maximum working pressures. Key features include large water filtration areas, labyrinth water passages for clogging resistance, and injection molded construction for uniformity. Performance data and packaging information is also included for planning irrigation system layout and parts ordering.

    Original Title

    aries-hwd-p

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for Aries integral dripper lines used for deciduous tree and row crop irrigation. It lists various models of the dripper lines with their dimensions, flow rates, filtration requirements, and maximum working pressures. Key features include large water filtration areas, labyrinth water passages for clogging resistance, and injection molded construction for uniformity. Performance data and packaging information is also included for planning irrigation system layout and parts ordering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views2 pages

    Aries HWD P

    Uploaded by

    Felipe Dias Araújo
    This document provides specifications for Aries integral dripper lines used for deciduous tree and row crop irrigation. It lists various models of the dripper lines with their dimensions, flow rates, filtration requirements, and maximum working pressures. Key features include large water filtration areas, labyrinth water passages for clogging resistance, and injection molded construction for uniformity. Performance data and packaging information is also included for planning irrigation system layout and parts ordering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ARIES™ HWD

    INTEGRAL DRIPPER 12010 - 16009 - 16010 - 16012 - 20010 - 20012 - 23009

    APPLICATIONS
    ■ Deciduous plantation, and tree irrigation.
    ■ On-surface multi seasonal row crops.

    FEATURES AND BENEFITS  


    ■ Largest filter in each dripper. Wide filtration area to ensure optimal performance even under harsh water conditions.
    ■ TurbuNext™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
    ■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
    ■ Injection molded dripper construction , ensuring uniform drippers and very low CV.

    SPECIFICATIONS
    ■ Maximum system pressure: according to dripperlines wall thickness.
    ■ Recommended filtration: according to drippers flow rates.
    Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
    Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
    When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s
    instructions.
    ■ TurbuNext™ labyrinth with superior performance.
    ■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
    ■ Injected dripper, very low CV.
    ■ High UV resistant.
    ■ Resistant to standard nutrients used in agricultural.
    ■ Aries™ dripperlines meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
    DRIPPERS TECHNICAL DATA
    12010,
    16009, 16010, 20010, 23009 - 0.9 and 1.0 mm wall thickness dripperlines
    FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
    PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
    (L/H) (BAR)** (MM) (MM²) K X (MICRON)/(MESH)

    0.55 0.47 0.53 65 36 0.191 0.46 130/120


    0.80 0.54 0.69 65 43 0.277 0.46 130/120
    1.00 0.60 0.74 65 49 0.347 0.46 200/80
    1.50 0.71 0.85 65 53 0.520 0.46 200/80
    3.0 up to 3.5
    2.00 0.76 1.03 65 54 0.693 0.46 200/80
    3.00 0.90 1.20 65 54 1.040 0.46 200/80
    4.00 0.94 1.28 33 54 1.387 0.46 200/80
    8.00 1.52 1.28 28 50 2.773 0.46 200/80
    *Flow rate at 1.0 bar pressure **According to dripperlines wall thickness

    16012, 20012 - 1.2 mm wall thickness dripperlines


    FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
    PRESSURE WIDTH-DEPTH-LENGTH (MM²) FILTRATION
    (L/H) (BAR)** (MM) K X (MICRON)/(MESH)

    0.55 0.47 0.53 65 36 0.191 0.46 130/120


    0.85 0.54 0.69 65 43 0.295 0.46 130/120
    1.05 0.60 0.74 65 49 0.364 0.46 200/80
    1.60 0.71 0.85 65 53 0.554 0.46 200/80
    4.00
    2.10 0.76 1.03 65 54 0.728 0.46 200/80
    3.15 0.90 1.20 65 54 1.092 0.46 200/80
    4.20 0.94 1.28 33 54 1.455 0.46 200/80
    8.40 1.52 1.28 28 50 2.912 0.46 200/80
    *Flow rate at 1.0 bar pressure*Flow rate at 1.0 bar pressure

    DRIPPERLINES TECHNICAL DATA


    MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
    (MM) (MM) (MM) (BAR) (BAR)

    12010 10.30 1.0 12.30 4.0 5.2 0.70


    16009 14.20 0.9 16.00 3.0 3.9 0.40
    16010 14.20 1.0 16.20 3.5 4.6 0.40
    16012 14.20 1.2 16.60 4.0 5.2 0.40
    20010 17.50 1.0 19.50 3.5 4.6 0.10
    20012 17.50 1.2 19.90 4.0 5.2 0.10
    23009 20.80 0.9 22.60 3.0 3.9 0.07

    DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)


    MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
    DRIPPERS WEIGHT CONTAINER CONTAINER
    (MM) (M) (M) (KG) (UNITS) (M)

    12010 1.0 500 0.15 to 1.00 21.0 370 222000


    16009 0.9 500 0.15 to 1.00 20.7 330 165000
    16010 1.0 500 0.15 to 1.00 23.0 330 165000
    16012 1.2 400 0.15 to 1.00 22.3 352 140800
    20010 1.0 300 0.15 to 1.00 16.7 330 99000
    20012 1.2 300 0.15 to 1.00 20.2 330 99000
    06-0817-DRP-PS-0065-EN

    23009 300 0.15 to 0.25 17.6 144000


    0.9 480
    (on carton coils) 400 0.30 to 1.00 22.4 192000
    *According to drippers spacing

    WWW.NETAFIM.COM
    E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM

    You might also like