Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Aries HWD T

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

ARIES™ HWD

INTEGRAL DRIPPER 12010 - 16009 - 16010 - 16012 - 20010 - 20012 - 23009

TECHNICAL INFORMATION
■ Maximum system pressure: according to dripperlines wall thickness.
■ Recommended filtration: according to drippers flow rates.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s
instructions.
■ TurbuNext™ labyrinth with superior performance.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ High UV resistant.
■ Resistant to standard nutrients used in agricultural.
■ Aries™ dripperlines meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
DRIPPERS TECHNICAL DATA
12010,
16009, 16010, 20010, 23009 - 0.9 and 1.0 mm wall thickness dripperlines
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR)** (MM) (MM²) K X (MICRON)/(MESH)

0.55 0.47 0.53 65 36 0.191 0.46 130/120


0.80 0.54 0.69 65 43 0.277 0.46 130/120
1.00 0.60 0.74 65 49 0.347 0.46 200/80
1.50 0.71 0.85 65 53 0.520 0.46 200/80
3.0 up to 3.5
2.00 0.76 1.03 65 54 0.693 0.46 200/80
3.00 0.90 1.20 65 54 1.040 0.46 200/80
4.00 0.94 1.28 33 54 1.387 0.46 200/80
8.00 1.52 1.28 28 50 2.773 0.46 200/80
*Flow rate at 1.0 bar pressure **According to dripperlines wall thickness

FLOW RATE (L/H) VS. PRESSURE (BAR)


12010, 16009, 16010, 20010, 23009 - 0.9 and 1.0 mm wall thickness dripperlines
PRESSURE (BAR)
FLOW RATE* 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0
0.55 0.26 0.36 0.44 0.50 0.55 0.66 0.76 0.84 0.91
0.80 0.38 0.52 0.63 0.72 0.80 0.96 1.10 1.22 1.32
1.00 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.50 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49
2.00 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31
3.00 1.43 1.97 2.37 2.71 3.00 3.61 4.13 4.57 4.97
4.00 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63
8.00 3.81 5.25 6.32 7.22 8.00 9.64 11.00 12.19 13.26
*Flow rate at 1.0 bar pressure

16012, 20012 - 1.2 mm wall thickness dripperlines


FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE WIDTH-DEPTH-LENGTH (MM²) FILTRATION
(L/H) (BAR)** (MM) K X (MICRON)/(MESH)

0.55 0.47 0.53 65 36 0.191 0.46 130/120


0.85 0.54 0.69 65 43 0.295 0.46 130/120
1.05 0.60 0.74 65 49 0.364 0.46 200/80
1.60 0.71 0.85 65 53 0.554 0.46 200/80
4.00
2.10 0.76 1.03 65 54 0.728 0.46 200/80
3.15 0.90 1.20 65 54 1.092 0.46 200/80
4.20 0.94 1.28 33 54 1.455 0.46 200/80
8.40 1.52 1.28 28 50 2.912 0.46 200/80
*Flow rate at 1.0 bar pressure*Flow rate at 1.0 bar pressure

FLOW RATE (L/H) VS. PRESSURE (BAR)


16012, 20012 - 1.2 mm wall thickness dripperlines
PRESSURE (BAR)
FLOW RATE* 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0
0.55 0.26 0.36 0.44 0.50 0.55 0.66 0.76 0.84 0.91
0.85 0.41 0.56 0.67 0.77 0.85 1.03 1.17 1.30 1.41
1.05 0.50 0.69 0.83 0.95 1.05 1.27 1.44 1.60 1.74
1.60 0.76 1.05 1.26 1.44 1.60 1.93 2.20 2.44 2.65
2.10 1.00 1.38 1.66 1.89 2.10 2.53 2.89 3.20 3.48
3.15 1.50 2.07 2.49 2.84 3.15 3.80 4.33 4.80 5.22
4.20 2.00 2.75 3.32 3.79 4.20 5.06 5.77 6.40 6.96
8.40 4.01 5.51 6.64 7.58 8.40 10.12 11.55 12.80 13.92
*Flow rate at 1.0 bar pressure

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 2
DRIPPERLINES TECHNICAL DATA
MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12010 10.30 1.0 12.30 4.0 5.2 0.70


16009 14.20 0.9 16.00 3.0 3.9 0.40
16010 14.20 1.0 16.20 3.5 4.6 0.40
16012 14.20 1.2 16.60 4.0 5.2 0.40
20010 17.50 1.0 19.50 3.5 4.6 0.10
20012 17.50 1.2 19.90 4.0 5.2 0.10
23009 20.80 0.9 22.60 3.0 3.9 0.07

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)


MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

12010 1.0 500 0.15 to 1.00 21.0 370 222000


16009 0.9 500 0.15 to 1.00 20.7 330 165000
16010 1.0 500 0.15 to 1.00 23.0 330 165000
16012 1.2 400 0.15 to 1.00 22.3 352 140800
20010 1.0 300 0.15 to 1.00 16.7 330 99000
20012 1.2 300 0.15 to 1.00 20.2 330 99000

23009 300 0.15 to 0.25 17.6 144000


0.9 480
(on carton coils) 400 0.30 to 1.00 22.4 192000
*According to drippers spacing

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 3
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 54 70 83 93 101 108 113 118 122
1% 59 79 96 110 123 134 145 154 162
FLAT TERRAIN 0 63 88 110 130 148 165 182 198 213
-1% 67 95 121 145 169 190 212 233 253
DOWNHILL -2% 70 101 130 158 184 210 235 259 283

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 0.80 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 44 59 70 80 88 95 102 106 111
1% 47 64 78 91 102 112 122 131 138
FLAT TERRAIN 0 50 69 86 103 117 131 145 157 168
-1% 52 73 93 112 130 147 163 180 196
DOWNHILL -2% 54 78 100 122 143 165 185 205 225

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 1.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 39 52 63 72 79 86 92 97 102
1% 41 56 69 80 90 99 107 115 123
FLAT TERRAIN 0 43 60 75 89 101 113 125 136 146
-1% 44 63 80 96 110 125 139 153 166
DOWNHILL -2% 46 66 85 103 121 138 155 172 188

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 1.50 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 31 41 50 58 65 71 77 82 86
1% 32 44 54 63 71 79 86 93 99
FLAT TERRAIN 0 33 46 58 69 79 88 97 105 113
-1% 34 48 60 72 83 95 105 114 124
DOWNHILL -2% 35 50 64 77 89 102 114 126 137

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 2.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 27 36 44 51 57 62 68 72 77
1% 27 38 47 55 62 69 75 81 86
FLAT TERRAIN 0 28 40 50 59 67 75 82 90 97
-1% 29 41 51 61 71 80 89 97 105
DOWNHILL -2% 30 42 54 65 75 85 95 105 114

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 4
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 3.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 21 28 35 41 46 50 55 59 63
1% 21 29 36 43 49 55 59 65 69
FLAT TERRAIN 0 22 30 38 45 52 58 64 70 75
-1% 22 31 39 47 54 61 67 74 80
DOWNHILL -2% 22 32 40 49 56 64 71 78 85

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 4.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 17 23 29 34 38 43 46 50 53
1% 17 24 30 36 40 45 50 53 57
FLAT TERRAIN 0 18 25 31 37 42 48 52 57 61
-1% 18 25 31 38 43 48 54 59 64
DOWNHILL -2% 18 26 32 39 45 50 56 62 67

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 12010 • ID 10.2 MM • KD 0.70 • FLOW RATE 8.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 11 15 19 23 25 28 31 33 36
1% 11 15 19 23 26 29 32 35 38
FLAT TERRAIN 0 11 16 20 24 27 30 34 37 39
-1% 11 16 20 24 28 31 34 37 40
DOWNHILL -2% 11 16 20 25 28 32 35 39 42

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 85 104 116 125 131 136 139 142 144
1% 98 128 152 171 186 199 210 220 228
FLAT TERRAIN 0 113 156 194 229 261 291 320 347 373
-1% 125 178 227 274 319 362 404 445 485
DOWNHILL -2% 135 195 252 307 360 410 253 233 210

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 0.80 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 73 92 106 116 124 130 134 139 141
1% 81 108 129 147 162 176 186 197 207
FLAT TERRAIN 0 90 125 155 184 209 234 257 279 300
-1% 98 139 178 216 251 287 322 356 390
DOWNHILL -2% 106 155 203 251 298 346 394 443 492

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 5
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 1.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 65 83 97 107 115 122 127 131 135
1% 71 95 114 131 145 158 170 179 188
FLAT TERRAIN 0 78 108 134 159 181 203 222 241 260
-1% 83 118 151 183 212 242 270 299 326
DOWNHILL -2% 89 130 169 208 247 285 324 362 401

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 1.50 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 52 68 80 91 99 106 112 117 121
1% 56 75 92 106 118 130 139 149 157
FLAT TERRAIN 0 60 83 104 123 140 156 171 186 201
-1% 63 89 113 136 158 179 200 220 240
DOWNHILL -2% 66 96 124 151 178 204 230 257 282

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 2.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 44 59 70 80 88 95 101 106 110
1% 47 64 78 90 101 111 121 130 136
FLAT TERRAIN 0 50 69 86 102 116 130 143 155 167
-1% 52 73 93 111 128 146 162 178 194
DOWNHILL -2% 54 78 100 122 142 163 183 203 223

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 3.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 35 47 56 65 72 78 85 90 94
1% 37 50 61 72 81 89 97 104 111
FLAT TERRAIN 0 38 53 66 79 90 100 110 121 129
-1% 39 56 70 84 97 109 122 133 144
DOWNHILL -2% 41 58 74 90 105 119 134 148 161

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 4.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 30 40 48 56 63 69 74 78 83
1% 31 42 52 61 68 76 82 88 94
FLAT TERRAIN 0 32 44 55 66 75 84 91 100 107
-1% 32 46 58 69 79 90 99 109 118
DOWNHILL -2% 33 47 60 73 85 97 108 119 129

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 6
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 16009/16010 • ID 14.2 MM • KD 0.40 • FLOW RATE 8.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 19 26 33 38 43 48 52 56 59
1% 20 27 34 40 46 51 55 60 64
FLAT TERRAIN 0 20 28 36 42 48 54 59 65 70
-1% 21 29 36 43 50 56 62 68 73
DOWNHILL -2% 21 29 38 45 52 59 66 72 78

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 85 104 116 125 131 136 139 142 144
1% 98 128 152 171 186 199 210 220 228
FLAT TERRAIN 0 113 156 194 229 261 291 320 347 373
-1% 125 178 227 274 319 362 404 445 485
DOWNHILL -2% 135 195 252 307 360 410 253 233 210

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 0.85 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 71 89 103 114 121 127 133 136 140
1% 78 104 125 143 157 170 182 193 202
FLAT TERRAIN 0 87 120 149 177 201 225 247 268 289
-1% 93 133 170 206 240 274 306 338 371
DOWNHILL -2% 101 147 193 238 283 328 373 419 464

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 1.05 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 63 81 94 105 113 120 126 130 134
1% 69 93 112 128 142 155 166 176 185
FLAT TERRAIN 0 76 105 130 154 176 196 215 234 252
-1% 81 114 146 176 205 233 261 288 314
DOWNHILL -2% 86 125 163 201 237 274 310 347 384

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 1.60 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 50 66 78 89 97 103 110 114 119
1% 54 73 88 103 114 125 135 144 153
FLAT TERRAIN 0 58 80 100 118 134 150 165 179 193
-1% 60 85 108 130 151 171 190 210 228
DOWNHILL -2% 64 92 118 144 169 194 219 243 268

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 7
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 2.10 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 43 57 68 78 86 92 99 104 108
1% 46 62 76 88 99 109 118 125 133
FLAT TERRAIN 0 48 67 84 99 113 126 138 150 162
-1% 50 71 90 108 124 141 156 172 187
DOWNHILL -2% 52 75 96 117 137 157 176 195 214

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 3.15 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 34 46 55 64 71 77 82 88 93
1% 36 48 60 70 79 87 94 102 108
FLAT TERRAIN 0 37 51 64 76 87 97 107 117 126
-1% 38 54 68 81 94 106 118 129 139
DOWNHILL -2% 39 56 72 87 101 115 129 142 155

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 4.20 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 29 39 47 55 61 67 72 77 81
1% 30 41 50 59 67 74 80 86 92
FLAT TERRAIN 0 31 43 54 64 73 81 89 96 104
-1% 31 44 56 67 77 87 96 105 114
DOWNHILL -2% 32 46 58 71 82 93 104 114 125

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 16012 • ID 14.2 MM • KD 0.40 • FLOW RATE 8.40 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 19 26 32 37 42 46 50 54 58
1% 19 27 33 39 44 49 54 59 63
FLAT TERRAIN 0 20 27 34 41 47 53 58 63 68
-1% 20 28 35 42 48 54 60 66 71
DOWNHILL -2% 20 29 36 44 50 57 63 69 75

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 113 128 136 142 145 147 149 149 151
1% 146 179 202 220 234 244 254 260 266
FLAT TERRAIN 0 185 246 300 349 394 437 478 516 553
-1% 215 299 376 449 519 587 653 716 778
DOWNHILL -2% 239 337 236 229 201 191 186 184 182

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 8
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 0.80 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 102 120 131 139 143 147 150 152 153
1% 124 155 178 198 213 225 236 246 253
FLAT TERRAIN 0 148 197 241 280 317 351 384 415 444
-1% 169 236 298 359 419 477 536 594 652
DOWNHILL -2% 191 277 362 448 208 182 173 167 164

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 1.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 93 111 123 132 137 141 146 148 150
1% 110 139 161 180 195 207 219 229 236
FLAT TERRAIN 0 128 171 209 243 275 304 333 360 385
-1% 143 199 251 302 350 398 445 491 538
DOWNHILL -2% 160 230 298 367 435 505 192 179 172

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 1.50 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 78 95 108 117 124 130 134 138 141
1% 88 113 132 149 163 176 186 196 205
FLAT TERRAIN 0 99 132 161 188 212 235 257 278 298
-1% 108 148 186 222 256 290 322 356 387
DOWNHILL -2% 117 166 213 260 305 351 397 443 489

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 2.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 67 84 96 106 113 119 125 130 133
1% 75 96 114 129 142 154 164 174 182
FLAT TERRAIN 0 82 110 134 156 177 195 214 231 248
-1% 88 121 151 180 207 233 259 284 309
DOWNHILL -2% 95 133 170 205 240 274 309 343 377

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 3.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 54 69 80 90 97 104 110 114 119
1% 59 77 91 105 116 125 135 144 152
FLAT TERRAIN 0 63 85 104 121 136 151 166 179 192
-1% 67 91 113 134 154 173 191 210 227
DOWNHILL -2% 71 98 124 149 173 197 221 244 267

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 9
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 4.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 46 59 70 79 86 92 98 103 107
1% 49 65 78 89 99 109 117 124 131
FLAT TERRAIN 0 53 71 86 101 113 126 138 149 159
-1% 55 75 93 110 125 141 155 170 184
DOWNHILL -2% 58 80 100 120 139 157 175 194 211

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20010 • ID 17.5 MM • KD 0.10 • FLOW RATE 8.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 31 41 48 56 62 67 71 76 80
1% 32 43 52 60 67 74 80 86 91
FLAT TERRAIN 0 34 45 56 65 73 81 89 95 103
-1% 35 47 58 68 78 87 96 104 113
DOWNHILL -2% 36 49 61 73 83 94 104 113 123

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 113 128 136 142 145 147 149 149 151
1% 146 179 202 220 234 244 254 260 266
FLAT TERRAIN 0 185 246 300 349 394 437 478 516 553
-1% 215 299 376 449 519 587 653 716 778
DOWNHILL -2% 239 337 236 229 201 191 186 184 182

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 0.85 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 100 118 129 136 142 146 148 151 152
1% 120 150 174 193 208 221 232 240 249
FLAT TERRAIN 0 142 190 232 270 304 337 369 398 427
-1% 161 225 284 342 398 454 508 563 617
DOWNHILL -2% 182 263 343 424 505 188 176 170 166

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 1.05 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 91 109 121 130 136 140 144 147 149
1% 107 135 158 176 191 204 215 224 233
FLAT TERRAIN 0 124 166 202 236 266 295 322 348 373
-1% 139 192 242 291 337 383 428 473 517
DOWNHILL -2% 154 221 286 352 416 482 201 183 175

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 10
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 1.60 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 75 92 105 115 122 127 133 136 139
1% 85 109 128 145 159 171 182 192 200
FLAT TERRAIN 0 95 127 154 180 203 225 246 267 286
-1% 103 142 178 212 244 276 307 338 368
DOWNHILL -2% 112 158 202 246 289 332 375 418 461

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 2.10 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 66 82 94 104 112 118 123 128 131
1% 73 94 111 126 139 150 161 170 179
FLAT TERRAIN 0 79 107 130 152 171 190 207 224 241
-1% 85 117 146 173 199 225 250 274 298
DOWNHILL -2% 91 128 163 197 230 263 296 329 361

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 3.15 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 53 67 78 88 95 102 107 113 117
1% 57 74 89 102 112 123 132 140 148
FLAT TERRAIN 0 61 82 100 117 132 146 160 174 186
-1% 65 88 110 130 149 167 185 203 219
DOWNHILL -2% 68 95 120 144 167 190 212 234 256

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 4.20 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 45 58 68 77 84 91 96 101 105
1% 48 63 76 87 97 106 114 122 128
FLAT TERRAIN 0 51 68 84 98 110 123 134 144 155
-1% 53 72 90 106 121 136 150 164 178
DOWNHILL -2% 56 77 97 116 134 151 169 186 203

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 20012 • ID 17.5 MM • KD 0.10 • FLOW RATE 8.40 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 30 40 47 54 60 65 70 74 78
1% 31 42 50 59 65 71 78 83 89
FLAT TERRAIN 0 33 44 54 63 71 78 86 93 100
-1% 33 45 56 66 75 84 93 101 109
DOWNHILL -2% 34 47 59 70 80 90 100 110 119

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 11
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 0.55 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 129 140 145 148 150 151 152 152 153
1% 181 215 237 252 263 271 278 283 286
FLAT TERRAIN 0 251 334 406 472 533 590 645 697 746
-1% 306 425 537 643 744 466 512 461 419
DOWNHILL -2% 345 268 197 187 182 180 178 177 177

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 0.80 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 120 135 144 149 152 154 156 157 158
1% 154 189 215 234 248 259 268 275 281
FLAT TERRAIN 0 196 263 321 375 424 470 514 555 596
-1% 233 331 425 518 610 702 794 887 981
DOWNHILL -2% 273 407 201 175 166 162 160 158 157

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 1.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 112 129 138 145 148 151 154 155 156
1% 141 174 198 217 232 244 254 263 269
FLAT TERRAIN 0 174 232 282 329 371 411 449 485 520
-1% 204 285 362 438 512 587 660 734 808
DOWNHILL -2% 236 344 453 195 176 168 164 162 160

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 1.50 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 96 114 126 134 139 144 146 149 151
1% 114 144 166 185 200 214 224 233 242
FLAT TERRAIN 0 134 179 218 254 287 317 346 375 402
-1% 152 210 265 318 369 420 470 519 569
DOWNHILL -2% 170 244 317 390 463 207 184 175 169

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 2.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 85 103 115 124 130 136 139 143 146
1% 98 124 146 163 178 190 202 212 220
FLAT TERRAIN 0 112 149 181 211 238 264 289 312 334
-1% 123 170 214 255 295 335 373 411 449
DOWNHILL -2% 136 193 249 304 358 413 468 221 190

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 12
MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION
ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 3.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 70 86 99 108 116 123 126 131 135
1% 86 115 140 163 184 204 222 241 258
FLAT TERRAIN 0 86 115 140 163 184 204 222 241 258
-1% 93 127 159 189 217 245 272 299 325
DOWNHILL -2% 100 141 179 217 253 290 326 363 400

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 4.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 60 76 88 97 104 111 117 121 125
1% 66 85 102 115 127 139 148 157 165
FLAT TERRAIN 0 72 95 117 136 154 170 186 201 215
-1% 76 104 129 153 176 198 219 240 261
DOWNHILL -2% 81 113 143 172 200 228 256 284 311

MAX. LATERAL LENGTH (METERS) AT DIFFERENT SLOPES - 10% FLOW VARIATION


ARIES™ HWD • 23009 • ID 20.8 MM • KD 0.07 • FLOW RATE 8.00 L/H • INLET PRESSURE 1.5 BAR
DISTANCE BETWEEN DRIPPERS (METER)
SLOPE 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
UPHILL 2% 40 52 62 70 77 83 89 94 98
1% 42 56 68 78 86 95 102 110 117
FLAT TERRAIN 0 44 60 74 86 97 109 118 129 138
-1% 46 63 78 93 106 119 131 144 155
DOWNHILL -2% 48 67 84 100 116 131 146 160 175
06-0817-DRP-PS-0066-EN

WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM 13

You might also like