CR Data Book

GRUNDFOS DATA BOOKLET
CR, CRI, CRN

50 Hz IEC
Vertical, multistage centrifugal pumps
CR, CRI, CRN
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CRI, CRN 20 . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Table of contents
Typical applications . . . . . . . . . . . . . . . . . . . . . . . 3 CR 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pumped liquids. . . . . . . . . . . . . . . . . . . . . . . . . . 4 CRN 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
ErP compliant. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CR 45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CRN 45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
CR 64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
2. Performance range . . . . . . . . . . . . . . . . . . . . 5
CRN 64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
CR 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
3. Product range. . . . . . . . . . . . . . . . . . . . . . . . . 6 CRN 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CR 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4. Applications . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CRN 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
CR 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
CRN 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
5. Features and benefits . . . . . . . . . . . . . . . . . . 9
CR 185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
CRN 185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
CR 215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Terminal box positions . . . . . . . . . . . . . . . . . . . . 10
CRN 215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Ambient temperature . . . . . . . . . . . . . . . . . . . . . 10
CR 255 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CRN 255 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
6. Construction. . . . . . . . . . . . . . . . . . . . . . . . . 11 11. Electrical data. . . . . . . . . . . . . . . . . . . . . . . . 94

CR 1s, 1, 3, 5, 10, 15, 20 . . . . . . . . . . . . . . . . . . 11
2-pole motors for CR, CRI, CRN, 50 Hz . . . . . . . . 94
CRI 1s, 1, 3, 5, 10, 15, 20 . . . . . . . . . . . . . . . . . 12
CRN 1s, 1, 3, 5, 10, 15, 20 . . . . . . . . . . . . . . . . . 13
CR 32, 45, 64 . . . . . . . . . . . . . . . . . . . . . . . . . . 14 12. List of pumped liquids . . . . . . . . . . . . . . . . . 95
CRN 32, 45, 64. . . . . . . . . . . . . . . . . . . . . . . . . 15
CR 95, 125, 155, 185, 215, 255 . . . . . . . . . . . . . 16 13. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 97
CRN 95, 125, 155, 185, 215, 255 . . . . . . . . . . . . 17 Pipe connection . . . . . . . . . . . . . . . . . . . . . . . . 97
LiqTec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
7. Identification. . . . . . . . . . . . . . . . . . . . . . . . . 18 Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Type key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
14. Variants. . . . . . . . . . . . . . . . . . . . . . . . . . . 109
8. Operating conditions . . . . . . . . . . . . . . . . . . 20
Maximum operating pressure and liquid 15. Grundfos Product Center . . . . . . . . . . . . 110
temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating range of the shaft seal . . . . . . . . . . . . 22
Maximum inlet pressure. . . . . . . . . . . . . . . . . . . 23
9. Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selection of pumps . . . . . . . . . . . . . . . . . . . . . . 24
How to read the curve charts . . . . . . . . . . . . . . . 28
Guidelines to performance curves . . . . . . . . . . . . 29
10. Performance curves and technical data. . . 30

CR 1s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CRI, CRN 1s . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CR 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CRI, CRN 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CR 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CRI, CRN 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CR 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
CRI, CRN 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
CR 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
CRI, CRN 10 . . . . . . . . . . . . . . . . . . . . . . . . . . 48
CR 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
CRI, CRN 15 . . . . . . . . . . . . . . . . . . . . . . . . . . 52
CR 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2
CR, CRI, CRN
1
Introduction
1. Introduction
This data booklet deals with Grundfos CR, CRI and CRN A CR pump consists of two main components: the motor
pumps. and the pump unit.
The motor is a Grundfos or Siemens motor designed to
EN standards.
The pump unit consists of optimized hydraulics, various
types of connections, a sleeve, a pump head and various
other parts.
CR pumps are available in various material versions
according to the pumped liquid.
Typical applications
The pumps are suitable for numerous applications. The
following applications are some typical examples.
Water supply:
• Filtration and transport waterworks
GR5381
• Distribution from waterworks
• Pressure boosting of mains.
CR, CRI and CRN 1s-64 Industrial:
• Pressure boosting
• Process water transfer
• Boiler feed
• Cooling and air conditioning
• Firefighting systems
• Special liquids transfer.
Water treatment:
TM069062
• Filtration
• Brackish water reverse osmosis.
Commercial building services:
CR, CRN 95-255
• Chilled-water systems
CR pumps are vertical multistage, centrifugal pumps. The • Hot-water systems
in-line design of the pumps enables installation in a • Pressure boosting
horizontal one-pipe system where the inlet and outlet
ports are in the same horizontal level and have the same • Boiler feed
pipe dimensions. This design provides a more compact • Firefighting systems
pump design.
• District energy systems.
The pumps are available in various sizes and various
numbers of stages to deliver the flow rate and pressure Related information
required. 4. Applications
CR pumps are designed for a variety of applications
ranging from the pumping of potable water to the pumping
of chemicals. The pumps are therefore suitable for a wide
diversity of pumping systems where the performance and
material of the pump meet specific demands.
3
1 CR, CRI, CRN
Pumped liquids ErP compliant

Introduction
CR, CRI and CRN pumps are suitable for pumping liquids The product is energy-optimized and complies with the
which are thin, clean, non-flammable, non-combustible or ecodesign requirements for water pumps specified in the
non-explosive liquids, not containing solid particles or ErP Directive (Commission Regulation (EC) No
fibres. 547/2012), which became effective on 1 January 2013. As
When pumping liquids with a density and/or viscosity from this date, all pumps are classified and graduated in
higher than that of water, use motors with correspondingly the Minimum Efficiency Index (MEI).
higher outputs, if required.
Minimum efficiency index
Whether a pump is suitable for a particular liquid depends
on a number of factors of which the most important are Minimum efficiency index (MEI) means the dimensionless
chloride content, pH value, temperature, content of scale unit for hydraulic pump efficiency at best efficiency
chemicals and oils. Please consult Grundfos for point (BEP), part load (PL) and overload (OL). The
information about which pump types are suitable for a Commission Regulation (EU) sets efficiency requirements
specific liquid. to MEI ≥ 0.10 as from 1 January 2013 and MEI ≥ 0.40 as
from 1 January 2015. An indicative benchmark for best-
CR and CRI performing water pump available on the market as from 1
CR and CRI pumps are suitable for non-corrosive liquids. January 2013 is determined in the Commission
Use CR or CRI pumps for liquid transfer, circulation and Regulation.
pressure boosting of cold or hot clean water. • The benchmark for most efficient water pumps is MEI
CRN ≥ 0.70.
CRN pumps are suitable for industrial liquids. • The efficiency of a pump with a trimmed impeller is
Use CRN pumps in systems where all parts in contact usually lower than that of a pump with the full impeller
with the liquid must be made of high-grade stainless steel. diameter. The trimming of the impeller will adapt the
pump to a fixed duty point, leading to reduced energy
CRT
consumption. The minimum efficiency index (MEI) is
For saline or chloride-containing liquids such as sea water based on the full impeller diameter.
or for oxidising agents such as hypochlorites, we offer
CRT pumps made of titanium. • The operation of this water pump with variable duty
points may be more efficient and economic when
• See the separate data booklet on CRT, CRTE controlled, for example, by the use of a variable-speed
available on Grundfos Product Center (http://product- drive that matches the pump duty to the system.
selection.grundfos.com/).
• Information on benchmark efficiency is available at
Related information http://europump.eu/efficiencycharts.
12. List of pumped liquids
MEI values for CR pumps
Pump type MEI
CR 1s-3 0.54
CR 1-3 > 0.70
CR 3-3 > 0.70
CR 5-3 0.57
CR 10-3 > 0.70
CR 15-3 > 0.70
CR 20-3 > 0.70
CR 32-3 > 0.70
CR 45-3 > 0.70
CR 64-3 > 0.70
CR 95-3 > 0.70
CR 125-3 > 0.70
CR 155-3 > 0.70
CR 185-3 > 0.70
CR 215-3 ≥ 0.70
CR 255-3 ≥ 0.70
4
CR, CRI, CRN
2
Performance range
2. Performance range
TM021192
Performance range for CR, CRI, CRN 50 Hz
- - - - - High-pressure range
5
3 CR, CRI, CRN
Product range
3. Product range
CR, CRI, CRN pump size 1s 1 3 5 10 15 20

Rated flow rate [m3/h] 0.8 1 3 5 10 15 20
Flow rate [m3/h] 0.3 - 1.1 0.7 - 2.4 1.2 - 4.5 2.5 - 8.5 5-13 9-24 11-29
Minimum liquid temperature [°C]1) -20 -20 -20 -20 -20 -20 -20
Maximum liquid temperature [°C]1) 120 120 120 120 120 120 120
Maximum pump efficiency [%] 35 48 58 66 70 72 72
Maximum pressure [bar] 21 22 24 24 22 23 25
High pressure [bar], on request (CRN) - 47 41 47 44 47 48
Motor power [kW] 0.37 - 1.1 0.37 - 2.2 0.37 - 3 0.37 - 5.5 0.37 - 7.5 1.1 - 15 1.1 - 18.5
Standard versions
CR:
Cast iron and stainless steel ● ● ● ● ● ● ●
EN 10088 1.4301≈AISI 304
CRI:
Stainless steel ● ● ● ● ● ● ●
EN 10088 1.4301≈AISI 304
CRN:
Stainless steel ● ● ● ● ● ● ●
EN 10088 1.4401≈AISI 316
CRT: See the CRT, CRTE data booklet available on Grundfos Product Center at http://product-
Titanium selection.grundfos.com or http://net.grundfos.com/qr/i/V7149894
CR pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1 Rp 1 1/4 Rp 1 1/4 Rp 2 Rp 2
Rp 1 1/4
Oval flange (BSP), on request Rp 1 1/4 Rp 1 1/4 Rp 1 1/4 Rp 1 Rp 2 1/2 Rp 2 1/2
Rp 2
DN 25/ DN 25/ DN 25/ DN 25/
Flange DN 40 DN 50 DN 50
DN 32 DN 32 DN 32 DN 32
Flange, on request - - - - DN 50 - -
CRI pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1 1/4 Rp 1 1/4 Rp 1 1/2 Rp 2 Rp 2
Oval flange (BSP), on request Rp 1 1/4 Rp 1 1/4 Rp 1 Rp 1 Rp 2 - -
DN 25/ DN 25/ DN 25/ DN 25/
DN 32 DN 32 DN 32 DN 32
R 1 1/4 R 1 1/4 R 1 1/4 R 1 1/4 R2 R2 R2
PJE coupling (Victaulic type)
DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling (L-coupling) ∅48.3 ∅48.3 ∅48.3 ∅48.3 ∅60.3 ∅60.3 ∅60.3
Union (+GF+) G2 G2 G2 G2 G 2 3/4 G 2 3/4 G 2 3/4
CRN pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1 1/4 Rp 1 1/4 Rp 1 1/2 Rp 2 Rp 2
Oval flange (BSP), on request Rp 1 1/4 Rp 1 1/4 Rp 1 Rp 1 Rp 2 - -
DN 25/ DN 25/ DN 25/ DN 25/
DN 32 DN 32 DN 32 DN 32
R 1 1/4 R 1 1/4 R 1 1/4 R 1 1/4 R2 R2 R2
PJE coupling (Victaulic type)
DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling (L-coupling) ∅42.2 ∅42.2 ∅42.2 ∅42.2 ∅60.3 ∅60.3 ∅60.3
Union (+GF+) G2 G2 G2 G2 G 2 3/4 G 2 3/4 G 2 3/4
● Standard.
1) Liquid temperature -40 to +180 °C (oils up to 240 °C) is available on request.
6
CR, CRI, CRN
3
Product range
CR, CRN pump size 32 45 64 95 125 155 185 215 255
Rated flow rate [m3/h] 32 45 64 95 125 155 185 215 255
Flow rate [m3/h] 15-40 22-58 30-85 45-120 60-160 75-200 92-240 108-280 128–330
Minimum liquid temperature [°C]1) -30 -30 -30 -20 -20 -20 -20 -20 -20
Maximum liquid temperature [°C]2) 120 120 120 120 120 120 120 120 120
Maximum pump efficiency [%] 78 79 80 81 82 82 82 84 85
Maximum pressure [bar] 28 33 22 23 323) 273) 35 32 28
High pressure [bar], on request (CRN) 50 49 41 - - - - - -
Motor power [kW] 1.5 - 30 3-45 4-45 5.5 - 55 11-110 11-110 18.5 - 200 22-200 30-200
Standard versions
CR:
Cast iron and stainless steel ● ● ● ● ● ● ● ● ●
EN 10088 1.4301≈AISI 304
CRN:
Stainless steel ● ● ● ● ● ● ● ● ●
EN 10088 1.4401≈AISI 316
CR pipe connection
Oval flange (BSP) - - - - - - - - -
Oval flange (BSP), on request - - - - - - - - -
Flange DN 65 DN 80 DN 100 DN 100 DN 150 DN 150 DN 200 DN 200 DN 200
Flange, on request DN 80 DN 100 DN 125 - - - - - -
CRN pipe connection
Oval flange (BSP) - - - - - - - - -
Oval flange (BSP), on request - - - - - - - - -
Flange DN 65 DN 80 DN 100 DN 100 DN 150 DN 150 DN 200 DN 200 DN 200
Flange, on request DN 80 DN 100 DN 125 - - - - - -
PJE coupling (Victaulic type) 3" 4" 4" 4" 6" 6" 8" 8" 8"
Clamp coupling (L-coupling) 88.9 114.3 114.3 114.3 168.3 168.3 219.1 219.1 219.1
Union (+GF+) - - - - - - - - -
● Standard.
1) Minimum liquid temperature down to -40 °C is available on request.
2) CR, CRN 32-155: Maximum liquid temperature up to +180 °C (oils up to 240 °C) is available on request.
3) CR pumps: Maximum operating pressure is 25 bar.
7
4 CR, CRI, CRN
Applications
4. Applications
Water supply
CR, CRI CRN
Filtration and transfer at waterworks ● ❍
Distribution from waterworks ● ❍
Pressure boosting in mains ● ❍
Pressure boosting in, for example, high-rise buildings, hotels ● ❍
Pressure boosting for industrial water supply ● ❍
Industry
CR, CRI CRN
Pressure boosting
Process-water systems ● ●
Washing and cleaning systems ● ●
Vehicle-washing tunnels ● ❍
Firefighting systems ● -
Liquid transfer
Cooling and air-conditioning systems (refrigerants) ● ❍
Boiler feed and condensate systems ● ❍
Machine tools (cooling lubricants) ● ●
Aquafarming ● ❍
Special transfer duties
Oils and alcohols ● ●
Acids and alkalis - ●
Glycol and coolants ● -
Water treatment
CR, CRI CRN
Ultra-filtration systems - ●
Reverse osmosis systems - ●
Softening, ionising, demineralising systems - ●
Distillation systems - ●
Separators ● ●
Swimming baths - ●
Irrigation
CR, CRI CRN
Field irrigation (flooding) ● ❍
Sprinkler irrigation ● ❍
Drip-feed irrigation ● ❍
● Recommended version.
❍ Alternative version.
Note that for applications involving CIP (clean-in-place) and CR, CRN 95-255 pumps with motors above 55 kW, you must
use a bearing flange and a base without thrust handling device.
8
CR, CRI, CRN
5
Features and benefits

5. Features and benefits
Pump Motor
The CR pumps are non-self-priming, vertical multistage
Grundfos MG and Siemens motors
centrifugal pumps.
CR, CRI and CRN pumps are fitted with totally enclosed,
The pumps are available with a Grundfos or Siemens
fan-cooled, 2-pole standard motors with principal
standard motor.
dimensions to EN standards.
The pump consists of a base and a pump head. The
Electrical tolerances according to EN 60034.
chamber stack and the sleeve are secured between the
base and the pump head by means of staybolts. The base CR, CRI, CRN pumps are fitted with three-phase MG
has inlet and outlet ports on the same level (in line). All motors as standard up to 22 kW and Siemens motors
pumps are fitted with a maintenance-free mechanical from 30 to 200 kW.
shaft seal of the cartridge type. CR, CRI, CRN pumps from 0.37 to 2.2 kW are also
available with single-phase motors (1 x 220-230/240 V).
See Grundfos Product Center (http://product-
selection.grundfos.com/).
1
Electrical data
2 Standard motors
CR, CRI, CRN
Up to 4 kW: B14/V18 tapped-hole flange
3 Mounting designation
From 5.5 kW: B5/V1 free-hole flange
9 Insulation class F
Efficiency class IE3
4
8 Enclosure class IP551)
5 3 x 220-240/380-415 V (P2: 0.37 - 1.5 kW)

Supply voltage 3 x 380-415 V (P2: 2.2 - 5.5 kW)
7 Tolerance: +/- 10 % 3 x 380-415/660-690 V (P2: 7.5 - 22 kW)
TM078847
3 x 380-420/660-725 V (P2: 30-200 kW)

6
Supply frequency 50 Hz
CR pump 1)
IP44 and IP54 are available on request.
Grundfos E-motors
Pos. Description
We also offer frequency-controlled CRE pumps which are
1 Motor
the ideal choice for a number of applications
2 Coupling characterized by a demand for variable flow rate at
3 Pump head constant pressure. These pumps are suited for water
4 Sleeve supply systems and pressure boosting as well as for
5 Staybolts industrial applications. Depending on the application, the
pumps offer energy savings, increased comfort and
6 Base plate
improved processing.
7 Base
See the CRE, CRIE, CRNE data booklet available on
8 Impellers Grundfos Product Center (http://product-
9 Shaft seal (cartridge type) selection.grundfos.com/).
Optional motors
The Grundfos standard range of motors covers a wide
variety of application demands. However, for special
applications or operating conditions, custom-built motor
solutions can be provided, such as the following:
• ATEX-approved motors
• MG motors with anti-condensation heating unit
• motors with thermal protection.
9
5 CR, CRI, CRN
Motor protection of MG and Siemens Ambient temperature

Features and benefits
motors
Maximum Maximum
Single-phase Grundfos motors have a built-in thermal Motor Motor ambient altitude above
power Motor make efficiency temperature
overload switch (TP 211 according to IEC 34-11). sea level
[kW] class
Three-phase motors must be connected to a motor- [°C] [m]
protective circuit breaker according to local regulations. 0.37 - 0.55 MG - 40 1000
Three-phase Grundfos motors as from 3 kW have a built- 0.75 - 22 MG IE3 60 3500
in thermistor (PTC) according to DIN 44082 (TP 211 30-200 Siemens IE3 55 2750
according to IEC 34-11).
If the ambient temperature exceeds the above maximum
Terminal box positions temperatures or the pump is installed at an altitude
As standard, the terminal box is fitted on the inlet side of exceeding the above altitude values, the motor must not
the pump. be fully loaded due to the risk of overheating. Overheating
may result from excessive ambient temperatures or the
low density and consequently low cooling effect of the air.
In such cases, it may be necessary to use a motor with a
higher rated output.
P2
TM033658 [%]
3
100
1 2 3 4 2
90
1
Terminal box positions 80
70
60
Pos. Description
50
1 6 o'clock position (standard)
20 25 30 35 40 45 50 55 60 65 70 75 80
TM032479
2 9 o'clock position t [°C]
3 12 o'clock position
1000 2250 3500 4750 m
4 3 o'clock position
Motor output in relation to temperature and altitude
Motor power
Pos. Motor make
[kW]
1 0.37 - 0.55 MG
2 0.75 - 22 MG
3 30-200 Siemens
Viscosity
Pumping liquids with densities or kinematic viscosities
higher than those of water will cause a considerable
pressure drop, a drop in the hydraulic performance and a
rise in the power consumption.
In such situations, the pump must be fitted with a larger
motor. If in doubt, contact Grundfos.
10
CR, CRI, CRN
6
Construction
6. Construction
CR 1s, 1, 3, 5, 10, 15, 20
3
10
4
6
5 7
9
11
8
TM021194
Materials, CR
Pos. Designation Materials DIN/EN ≈ AISI/ASTM
1 Pump head Grey cast iron EN 1561 EN-GJL-200 ASTM 25B
EN 10088 1.4401 1) AISI 316 1)
3 Shaft Stainless steel
EN 10088 1.4057 2) AISI 431 2)
4 Impeller Stainless steel EN 10088 1.4301 AISI 304
5 Chamber Stainless steel EN 10088 1.4301 AISI 304
6 Sleeve Stainless steel EN 10088 1.4301 AISI 304
7 O-ring for sleeve EPDM or FKM - -
8 Base Grey cast iron EN 1561 EN-GJL-250 ASTM 25B
9 Neck ring PTFE - -
10 Shaft seal (seal faces) Silicon carbide/silicon carbide - -
11 Bearing ring Silicon carbide/silicon carbide - -
Staybolts Bright steel EN 10277-2 1.0533 -
1) CR 1s, 1, 3, 5.
2) CR 10, 15, 20.
11
6 CR, CRI, CRN
CRI 1s, 1, 3, 5, 10, 15, 20

Construction
2 10
5 6
7
9 11
TM021195
8 12
Materials, CRI
1 Motor stool Grey cast iron 1) EN 1563 EN-GJS-450-10 ASTM A536 65-45-12
2 Pump head Stainless steel EN 10283 1.4408 CF 8M equal to AISI 316
EN 10088 1.4401 2) AISI 316 2)
EN 10088 1.4057 3) AISI 431 3)
8 Base Stainless steel EN 10283 1.4408 CF 8M equal to AISI 316
EN 1561 EN-GJL-200 3) + 4) ASTM 25B 3) + 4)
12 Base plate Grey cast iron 1) 5)
EN 1563 EN-GJS-500-7 ASTM A536 65-45-12 5)
1) Stainless steel available on request.

2) CRI, 1s, 1, 3, 5.
3) CRI, 10, 15, 20.
4) CRI 1s, 1, 3, 5 with FGJ flange connection.
5) CRI 1s, 1, 3, 5 with clamp connections (such as PJE, CA).
12
CR, CRI, CRN
6
CRN 1s, 1, 3, 5, 10, 15, 20
Construction
1
2 10
5 6
7
9 11
TM021195
8 12
Materials, CRN
1 Motor stool Grey cast iron 1) EN 1563 EN-GJS-450-10 ASTM A536 65-45-12
EN 10088 1.4401 2) AISI 316 2)
EN 10088 1.4460 3) AISI 329 3)
EN 1561 EN-GJL-200 3) + 4) ASTM 25B 3) + 4)
12 Base plate Grey cast iron 1) 5)
EN 1563 EN-GJS-500-7 ASTM A536 65-45-12 5)
EN 10088 1.4401 2) AISI 316 2)
Staybolts Stainless steel
EN 10088 1.4057 3) AISI 431 3)

2) CRN 1s, 1, 3, 5.
3) CRN 10, 15, 20.
4) CRN 1s, 1, 3, 5 with FGJ flange connection.
5) CRN 1s, 1, 3, 5 with clamp connections (such as PJE, CA).
13
6 CR, CRI, CRN
CR 32, 45, 64
Construction
10
1
6
4
11
5
7
12
TM060711
Materials, CR
1 Pump head Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536 65-45-12
2 Motor stool Grey cast iron EN 1561 EN-GJL-200 ASTM 25B
3 Shaft Stainless steel EN 10088 1.4057 AISI 431
8 Base Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536 65-45-12
9 Neck ring Carbon-graphite-filled PTFE - -
12 Support bearing Carbon-graphite-filled PTFE - -
13 Base plate Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536 65-45-12
14
CR, CRI, CRN
6
CRN 32, 45, 64
Construction
2
10
1
6
4
11
5
12
7
TM060712
13
Materials, CRN
2 Motor stool Grey cast iron 1) EN 1561 EN-GJL-200 ASTM 25B
3 Shaft Stainless steel EN 10088 1.4462 -
7 O-ring for sleeve EPDM or FKM -
9 Neck ring Carbon-graphite-filled PTFE - -
12 Support bearing Carbon-graphite-filled PTFE - -
13 Base plate Ductile cast iron 1) EN 1563 EN-GJS-500-7 ASTM A536 65-45-12
Staybolts Stainless steel EN 10088 1.4057 AISI 431
15
6 CR, CRI, CRN
CR 95, 125, 155, 185, 215, 255

Construction
1
2
3
4
5
6
7
8
9
10
11
TM065161
12
13
Materials, CR
1 Motor stool Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
EN 10088 1.4057 1) AISI 431 1)
EN 10088 1.4462 2) AISI 318 LN 2)
4 Pump head Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
5 Support bearing (bush) Carbon-graphite-filled PTFE
EN 10088 1.4301 AISI 304
6 Impeller Stainless steel
EN 10088 1.4401 3) AISI 316 3)
7 Neck ring PEEK - -
EN 10088 1.4301 AISI 304
8 Chamber Stainless steel
EN 10088 1.4401 3) AISI 316 3)
EN 10088 1.4301 1) AISI 304 1)
9 Sleeve Stainless steel
EN 10088 1.4404 2) AISI 316 L 2)
10 Bearing ring Tungsten carbide/tungsten carbide - -
EN 10088 1.4401
Stainless steel AISI 316 CF 8M equal to AISI 316
11 Thrust handling device 4) EN 10283 1.4408
Silicon carbide/tungsten carbide - -
12 Base Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
13 Base plate Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
Staybolts Stainless steel EN10088 1.4057 AISI 431
1) CR 95.
2) CR 125, 155, 185, 215, 255.
3) CR 185, 215, 255.
4) If fitted.
16
CR, CRI, CRN
6
CRN 95, 125, 155, 185, 215, 255
Construction
1
2
3
4
5
6
7
8
9
10
11
TM065161
12
13
Materials, CRN
1 Motor stool Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
2 Shaft Stainless steel EN 10088 1.4462 318 LN
4 Pump head Stainless steel EN 10283 1.4408 CF 8M
5 Support bearing (bush) Carbon-graphite-filled PTFE - -
7 Neck ring PEEK - -
9 Sleeve Stainless steel EN 10088 1.4404 AISI 316 L
10 Bearing ring Tungsten carbide/tungsten carbide - -
EN 10088 1.4401 AISI 316
Stainless steel
11 Thrust handling device 1) EN 10283 1.4408 CF 8M equal to AISI 316
Silicon carbide/tungsten carbide - -
12 Base Stainless steel EN 10283 1.4408 CF 8M
13 Base plate Ductile cast iron EN 1563 EN-GJS-500-7 ASTM A536-84 65-45-12
Staybolts Stainless steel EN10088 1.4057 AISI 431
1) If fitted.
17
7 CR, CRI, CRN
Identification
7. Identification
Type key Code Description
CX TriClamp
Example
F DIN flange
CRE 32-3-2 A-F-A-E-HQQE
FC DIN 11853-2 flange (collar flange)
Code Explanation FE EN 1092-1, type E
CR Type range: CR, CRI, CRN, CRT G ANSI flange
E Pump with integrated frequency converter J JIS flange
32 Flow rate [m3/h] N Changed diameter of ports
3 Number of impellers P PJE coupling (Victaulic type)
2 Number of reduced-diameter impellers X Special version
A Code for pump version Materials
F Code for pipe connection A Basic version
A Code for materials C Carbon-free pump
E Code for rubber parts D Carbon-graphite-filled PTFE (bearings)/tungsten carbide
Code for shaft seal: E Pickled and passivated (Only Japan)
H
• Shaft seal type designation
Q H Flanges and base plate EN 1.4408
• Seal face material (rotating seal face)
Q K Bronze (bearings)/tungsten carbide
• Seal face material (stationary seal face)
E
• Secondary seal material (rubber parts) L Motor stool, base plate and flanges EN 1.4408
Motor stool, base plate, coupling and flanges EN 1.4408 and
Key to codes M coupling guards in cobber. Bolts, nuts and spacing pipes EN
1.4401 or higher grade
Code Description N Flanges EN 1.4408
Pump version P PEEK neck ring
A Basic version Silicon carbide/silicon carbide bearing in pump and silicon
Q
carbide/silicon carbide seal faces in thrust handling device
B Oversize motor
R Silicon carbide/silicon carbide bearing
C CR compact
S PTFE neck rings
D Pump with pressure intensifier
T Base plate EN 1.4408
E Pump with certificate
Silicon carbide/silicon carbide bearing in pump and silicon
F Pump for high temperatures (with air-cooled top) U
carbide/tungsten carbide seal faces in thrust handling device
G E-pump without operating panel
W Tungsten carbide/tungsten carbide
H Horizontal version
X Special version
I Different pressure rating
Rubber parts in pump
J E-pump with a different maximum speed
E EPDM
K Pump with low NPSH
F FXM (Fluoraz®)
L Pump including Grundfos CUE and certificate
K FFKM (Kalrez®)
M Magnetic drive
N CR (Neoprene)
N With sensor
V FKM (Viton®)
O Cleaned and dried
Shaft seal type designation
P Undersize motor
A O-ring seal with fixed driver
Q High-pressure pump with high-speed MGE motor
H Balanced cartridge seal with O-ring
R Belt-driven pump
O Double seal, back-to-back
S High-pressure pump
P Double seal, tandem
T Thrust handling device
X Special version
U ATEX-approved pump
Seal face material (rotating and stationary seal face)
V Cascade function
B Carbon, synthetic resin-impregnated
W Deep-well pump with ejector
U Cemented tungsten carbide
X Special version
Q Silicon carbide
Y Electropolished
X Other ceramics
Z Pumps with bearing flange
Secondary seal material (rubber parts)
Pipe connection
A Oval flange
B NPT thread
CA FlexiClamp
18
CR, CRI, CRN
7
Identification
Code Description
E EPDM
F FXM (Fluoraz®)
K FFKM (Kalrez®)
V FKM (Viton®)
19
8 CR, CRI, CRN
Operating conditions
8. Operating conditions
Maximum operating pressure and liquid temperature
Oval flange PJE, clamp, union, DIN
Flange type
TM021383
TM021379
Maximum permissible Maximum permissible
Pump type Liquid temperature Liquid temperature
operating pressure 1) operating pressure 1)
[bar] [°C] [bar] [°C]
CR, CRI, CRN 1s 16 25
CR, CRI, CRN 1 16 25
CR, CRI, CRN 3 16 -20 to +120 25
CR, CRI, CRN 5 16 25 -20 to +120
CR, CRI 10-1 → 10-16 16 16
CR, CRI 10-17 → 10-22 - - 25
CRN 10 - - 25
CR, CRI 15-1 → 15-7 10 -20 to +120 - -
CR, CRI 15-1 → 15-10 - - 16
CR, CRI 15-12 → 15-17 - - 25 -20 to +120
CRN 15 - - 25
CR, CRI 20-1 → 20-7 10 -20 to +120 - -
CR, CRI 20-1 → 20-10 - - 16
CR, CRI 20-12 → 20-17 - - 25 -20 to +120
CRN 20 - - 25
CR, CRN 32-1-1 → 32-7 - - 16
CR, CRN 32-8-2 → 32-14 - - 30
CR, CRN 45-1-1 → 45-5 - - 16
CR, CRN 45-6-2 → 45-11 - - 30 -30 to +120
CR, CRN 45-12-2 → 45-13-2 - - 33
CR, CRN 64-1-1 → 64-5 - - 16
CR, CRN 64-6-2 → 64-8-1 - - 30
1) In standard configurations. For operating conditions outside the standard, contact Grundfos.
20
CR, CRI, CRN
8
Oval flange PJE, clamp, union, DIN
Flange type
TM021383
TM021379
Maximum permissible Maximum permissible
Pump type Liquid temperature Liquid temperature
operating pressure 1) operating pressure 1)
[bar] [°C] [bar] [°C]
CR, CRN 95-1-1 → 95-5 - - 16
CR, CRN 95-6 → 95-8-2 - - 25
CR, CRN 125-1 → 125-4 - - 16
CR, CRN 125-5 - - 25
CRN 125-6 → 125-7 - - 25
CRN 125-8 → 125-10 - - 40
CR, CRN 155-1-1 → 155-4-1 - - 16
CRN 155-5-2 → 155-6 - - 25
CRN 155-7 → 155-8-2 - - 40
-20 to +120 2)
CR, CRN 185-1 → 185-3 - - 16
CR, CRN 185-4-3 → 185-5 - - 25
CR, CRN 185-6-3 → 185-8 - - 40
CR, CRN 215-1-1 → 215-3 - - 16
CR, CRN 215-4-2 → 215-5 - - 25
CR, CRN 215-6-3 → 215-7-2 - - 40
CR, CRN 255-1-1 → 255-3-2 - - 16
CR, CRN 255-3 → 255-4 - - 25
CR, CRN 255-5-3 → 255-6-2 - - 40
1) In standard configurations. For operating conditions outside the standard, contact Grundfos.
2) For operating pressures above 25 bar, see section about operating range of the shaft seal.
21
8 CR, CRI, CRN
Operating range of the shaft seal ∅28 and ∅36 shaft seals (75-200 kW)
All pumps will be delivered with an HQQE/V cartridge p [bar]

shaft seal as standard. 50
The operating range of the shaft seal depends on 40

operating pressure, pump type, type of shaft seal and HQQE/V
liquid temperature. The range of standard shaft seals 30
applies to clean water and water with anti-freeze liquids.
HQQE
20 HQQE/V HQQE
For selection of the right shaft seal, see section with list of HBQE/V HBQE
pumped liquids. If the operating range is exceeded, the 10
TM061409
life of the shaft seal may be reduced.
0
Note that if you pump demineralized water with a -40 -20 0 20 40 60 80 100 120 140 t [°C]
conductivity below 2 μS/cm with a pump equipped with a
silicon carbide/silicon carbide shaft seal, there is an Operating range of standard shaft seals for CR, CRN
increased risk of electrochemical corrosion. We 125-255
recommend that you use a silicon carbide/carbon or
silicon carbide/tungsten carbide shaft seal instead.
Motor Liquid
Standard
Related information size Description temperature
shaft seal
[kW] [°C]
Shaft seals for CR, CRI, CRN 1s-255
O-ring (cartridge) (balanced
12. List of pumped liquids HQQE seal), silicon carbide/silicon -40 to +120
carbide, EPDM
14. Variants
Shaft seals for CR, CRI, CRN 1s-255 HQQV seal), silicon carbide/silicon
carbide, FKM
-20 to +90
∅12, ∅16 and ∅22 shaft seals (0.37-55 kW) 75-200

HQBE seal), silicon carbide/carbon, 0 to 120
p [bar] EPDM
50 O-ring (cartridge) (balanced
HQBV seal), silicon carbide/carbon, 0 to 90
40 FKM
HQQE/V
30
HQQE
20 HQQE/V HQQE
HQBE/V HQBE
10
TM061408
0
-40 -20 0 20 40 60 80 100 120 140 t [°C]
Operating range of standard shaft seals for CR, CRI,

CRN 1-255
Motor Liquid
Standard size temperature
Description
shaft seal
[kW] [°C]
HQQE seal), silicon carbide/silicon -40 to +120
carbide, EPDM
HQQV seal), silicon carbide/silicon -20 to +90
carbide, FKM
0.37 - 55
HQBE seal), silicon carbide/carbon, 0 to 120
EPDM
HQBV seal), silicon carbide/carbon, 0 to 90
FKM
22
CR, CRI, CRN
8
Maximum inlet pressure
Maximum inlet pressure
Pump type and stages
[bar]
The following table shows the maximum permissible inlet
CR, CRN 215
pressure. However, the outlet pressure, which is the
actual inlet pressure plus the pressure delivered by the 215-1-1 → 215-2-2 15
215-2-1 → 215-7-2 20
pump must always be lower than the maximum
permissible operating pressure. CR, CRN 255
If the maximum permissible operating pressure is 255-1-1 → 255-1 15

exceeded, the conical bearing in the motor may be 255-2-2 → 255-6-2 20
damaged and the life of the shaft seal, reduced.
Examples of operating and inlet pressures
Maximum inlet pressure The values for operating and inlet pressures must not be
Pump type and stages
[bar]
considered individually and must comply with the below
CR, CRI, CRN 1s statement.
1s-2 → 1s-36 10 The outlet pressure must be equal to or lower than the
CR, CRI, CRN 1 maximum operating pressure.
1-2 → 1-36 10 See the following definitions and examples.
CR, CRI, CRN 3 Definitions
3-2 → 3-29 10 Pressure type Definition
3-31 → 3-36 15
The maximum pressure is stated on
Maximum operating pressure
CR, CRI, CRN 5 the nameplate.
5-2 → 5-16 10 The difference between the outlet
Pump differential pressure
5-18 → 5-36 15 pressure and inlet pressure.
CR, CRI, CRN 10 The pressure measured at the pump

Inlet pressure
inlet.
10-1 → 10-6 8
The inlet pressure added to the pump
10-7 → 10-22 10 Outlet pressure
differential pressure.
CR, CRI, CRN 15
15-1 → 15-3 8 Example 1
15-4 → 15-17 10 Pump, see CR 5 curve: CR 5-16 A-A-A
CR, CRI, CRN 20 Max. operating pressure: 16 bar
20-1 → 20-17 10 Max. inlet pressure: 10 bar
CR, CRN 32 10.6 bar *
Pump differential pressure:
32-1-1 → 32-4 4 * Flow = 0 m3/h
32-5-2 → 32-10 10
32-11-2 → 32-14 15 This pump is not allowed to start at an inlet pressure of 10
CR, CRN 45 bar, but at an inlet pressure of 16.0 - 10.6 = 5.4 bar.
45-1-1 → 45-2 4 Example 2
45-3-2 → 45-5 10 Pump, see CR 10 curve: CR 10-2 A-A-A
45-6-2 → 45-13-2 15
Max. operating pressure: 16 bar
CR, CRN 64
Max. inlet pressure: 8 bar
64-1-1 → 64-2-2 4
2 bar *
64-2-1 → 64-4-2 10 Pump differential pressure:
* Flow = 0 m3/h
64-4-1 → 64-8-1 15
CR, CRN 95
This pump is allowed to start at an inlet pressure of 8 bar,
95-1-1 → 95-1 4 as the outlet pressure is lower than the maximum
95-2-2 → 95-3-2 10 operating pressure. This results in an operating pressure
95-3 → 95-6 15 of 8 + 2 = 10 bar.
95-7 → 95-8-2 20
If the inlet or operating pressure exceeds the pressure
CR, CRN 125 permitted, Grundfos variants meeting your specific
125-1 → 125-2-1 10 requirements may be available on request.
125-2 → 125-4 15
125-5 → 125-10 20 Related information
CR, CRN 155 14. Variants
155-1-1 → 155-1 10
155-2-2 → 155-3 15
155-4-1 → 155-8-2 20
CR, CRN 185
185-1-1 10
185-1 → 185-2 15
185-3-3 → 185-8 20
23
9 CR, CRI, CRN
Selection
9. Selection
Selection of pumps Pump efficiency
Before determining the best efficiency point, identify the
Base the selection of pumps on these parameters:
operation pattern of the pump. If the pump is expected to
• Duty point of the pump. See section about duty point always operate at the same duty point, select a pump
of the pump. which is operating at a duty point corresponding to the
• Sizing data such as pressure loss as a result of height best efficiency of the pump.
differences, friction loss in the pipes, pump efficiency.
See section about sizing data. p H
[MPa] [m]
280 -14
CR --
-14-2
• Pump materials. See section about pump material. 260 -13
-13-2
xx Hz
ISO 9906:2012 Grade 3B
2.4
• Pump connections. See section about pump 240 -12
-12-2
connections. 220 -11

-11-2
1
2.0
200 -10
-10-2
• Shaft seal. See section about shaft seal. 180 -9
-9-2
1.6
Duty point of the pump 160 -8
-8-2
140 -7
From a duty point, you can select a pump on the basis of 1.2 120 -6
-7-2
the performance curve charts. 100 -5

-6-2
-5-2
Ideally, the duty point should match the best efficiency on 0.8 80 -4
-4-2
the pump curve. 60 -3
-3-2
Grundfos Product Center 0.4 40 -2

-2-2
20 -1
2
We recommend that you size your pump in Grundfos 0.0 0
-1-1
Product Center. Our easy-to-use virtual guide leads you 0 4 8 12 16 20 24 28 32 36 Q [m³/h]
through the selection of the pump for the application in 0 2 4 6 8 10 Q [l/s]

question. For further information, see section about P2 P2
[hp] [kW]
Eta
[%]
2.0 Eta 80
Grundfos Product Center. 2.4
1.5
P2 1/1
60
P2 2/3
1.6
Sizing data 0.8
1.0
0.5
40
20
When sizing a pump, take these parameters into account: 0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
• Required flow rate and pressure at the draw-off point. [kPa]
200
[m]
20 QH 2900 rpm 1/1 8
[m]
160 QH 2900 rpm 2/3
• Pressure loss as a result of height differences (Hgeo). 120

15
10
6
4
80
TM078851
5 NPSH 2
• Friction loss in the pipes (Hf). It may be necessary to 40
0 0 0
account for pressure loss in connection with long 0 4 8 12 16 20 24 28 32 36 Q [m³/h]
pipes, bends, valves or similar.

• Best efficiency at the estimated duty point. Example of a CR pump’s duty point
• NPSH value. For calculation of the NPSH value, see
section about minimum inlet pressure, NPSH. Pos. Description
1 Duty point
2 Best efficiency
As the pump is sized on the basis of the highest possible

flow rate, it is important to always have the duty point to
Hr
1 the right of the best efficiency point on the efficiency curve
(eta). This must be considered in order to keep the
efficiency high when the flow rate drops.
Hgeo NPSH / NPSHR 1

Eta
TM026711
TM009190
Q [ m3 /h ]
Sizing data
Best efficiency
Pos. Description
Pos. Description
1 Required flow rate, required pressure
1 Best efficiency point
24
CR, CRI, CRN
9
Pump material Shaft seal
Selection
Select the material variant on the basis of the liquid to be
pumped.
The product range covers the following basic types.
• CR, CRI: Use CR, CRI pumps for clean, non-
aggressive liquids, such as potable water and oils.
GR7386
• CRN: Use CRN pumps for industrial liquids and acids.
See section about list of pumped liquids, or contact
Grundfos.
Shaft seal (cartridge type)
For saline or chloride-containing liquids, such as sea
water, CRT pumps of titanium are available.
As standard, the CR range is fitted with a Grundfos shaft
seal (cartridge type), which is suitable for the most
common applications.
The following key parameters must be taken into account
when selecting the shaft seal:
• type of pumped liquid
• liquid temperature
• maximum pressure.
We offer a wide range of shaft seal variants to meet
specific demands according to the pumped liquid.
TM069206
Servicing shaft seals

Replacement shaft seals are available as complete
service kits*.
CR pump Shaft seals fitted on CR, CRN 125-255 pumps with ∅28
mm or ∅36 mm shaft ends are serviceable. This means
Pump connections that the wear parts in these shaft seals are available as
Selection of a pump connection depends on the rated service kits* and can be replaced without having to renew
pressure and the pipes. To meet any requirement, the CR, the complete shaft seal.
CRI and CRN pumps offer a wide range of flexible * All service kits include detailed instructions on how to carry out the
connections, such as: replacement.
• oval flange A (BSP)
• DIN flange
• PJE coupling (Victaulic type)
• clamp coupling
• union (+GF+)
• other connections on request.
F (DIN)
A PJE
TM021201
Pump connections
25
9 CR, CRI, CRN
Thrust handling device Operating pressure and inlet pressure

Selection
Do not exceed the limit values for these pressures:

• maximum operating pressure
• maximum inlet pressure.
Minimum inlet pressure, NPSH
We recommend that you calculate the inlet pressure "H" in
these situations:
• The liquid temperature is high.
TM069669
• The flow rate is significantly higher than the rated flow
rate.
• Water is drawn from depths.
Thrust handling device • Water is drawn through long pipes.
• Inlet conditions are poor.
A thrust handling device (THD) is factory-fitted on pumps
with 75 kW motors or larger. The system consists of two To avoid cavitation, make sure that there is a minimum
parts. A rotating part mounted on the shaft end below the pressure on the inlet side of the pump.
first impeller as well as a non-rotating part mounted in or Calculate the maximum suction lift "H" in metres head as
on the pump base. follows:
The THD absorbs the main part of the thrust force
H = pb x 10.2 - NPSH - Hf - Hv
generated by the impellers and thereby reduces the
resulting axial force the motor bearings must absorb. This
Barometric pressure in bar.
enables the use of standard ball bearings in the motor
Pb can be set to 1 bar at sea level.
instead of special angular contact ball bearings. pb =
In closed systems, pb indicates the system pressure in
Note: For applications involving CIP (clean-in-place) and bar.
motors above 55 kW, use a bearing flange and a base Net Positive Suction Head in metres head. To be read
without THD. NPSH = from the NPSH curve at the highest flow rate the pump will
be delivering.
Friction loss in inlet pipe in metres head at the highest flow
120a Hf =
rate the pump will be delivering.
120b Vapour pressure in metres head. To be read from the

Hv = vapour pressure scale.
120g Hv depends on the liquid temperature tm.
120h
If the calculated "H" is positive, the pump can operate at a
suction lift of maximum "H" m head.
TM069670
If the calculated "H" is negative, an inlet pressure of

minimum "H" m head is required.
Position numbers for THD parts
Pos. Description Material

120a Thrust disc Stainless steel
120b Rotating ring Silicon carbide
Silicon carbide *
120g Stationary ring
Tungsten carbide
120h Lifting plate Stainless steel
EPDM
- O-rings
FKM
* On request for CRN.
26
CR, CRI, CRN
9
Selection
tm Hv
(°C) (m)
190 126
180 100
170 79
Hf
160 62
150 45
40
140 35
30
H 130
Pb NPSH 25
120 20
110 15
Hv 12
100 10
8,0
90
6,0
80 5,0
4,0
70 3,0
60 2,0
1,5
50
1,0
40 0,8
0,6
30 0,4
0,3
20
0,2
TM027439
10
0,1
0
Minimum inlet pressure, NPSH
To avoid cavitation, do not select a pump with a duty point

too far to the right on the NPSH curve.
Always check the NPSH value of the pump at the highest
possible flow rate.
Related information
15. Grundfos Product Center
27
9 CR, CRI, CRN
Selection
How to read the curve charts

p H
[MPa] [m]
1
280 -14
CR_ _
-14-2
xx Hz
260 -13 ISO 9906:2012 Grade 3B
-13-2
2.4
240 -12
-12-2
220 -11
-11-2
2.0
200 -10
-10-2
180 -9
2 -9-2 3
1.6 160 -8
-8-2
140 -7
-7-2
1.2 120 -6
-6-2
100 -5
-5-2
0.8 80 -4
-4-2
60 -3
-3-2
0.4 40 -2
-2-2
20 -1
-1-1
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0 2 4 6 8 10 Q [l/s] 5
P2 P2 Eta
[hp] [kW] [%]
2.0 Eta 80
2.4 P2 1/1
1.5 60
P2 2/3
1.6
4 1.0 40
0.8 0.5 20
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
200 20 QH 2900 rpm 1/1 8
160
15
QH 2900 rpm 2/3
6
7
6 120
10 4
80
TM078855
5 NPSH 2
40
0 0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
Pos. Description
1 Pump type. Frequency, poles or speed. ISO or ANSI standard.
2 Number of stages. First figure: number of stages. Second figure: number of reduced-diameter impellers.
3 QH curve for the individual pump. The bold curves indicate the recommended duty range for best efficiency.
4 The power curves indicate pump input power per stage. Curves are shown for full (1/1) and for reduced-diameter (2/3) impellers.
The eta curve shows the efficiency of a pump with an average number of stages. The efficiency of pumps with reduced-diameter impellers
5
is approximately 2 % lower than the eta curve shown in the chart.
6 QH curve for each individual impeller. Curves are shown for full (1/1) and for reduced-diameter (2/3) impellers.
7 The NPSH curve is a maximum curve for all the variants shown.
28
CR, CRI, CRN
9
Guidelines to performance curves
Selection
The guidelines below apply to the performance curves:
• Tolerances to ISO 9906:2012, Grade 3B, if indicated
on the curve chart.
• The motors used for the measurements are standard
Grundfos MG motors.
• Measurements have been made with airless water at
a temperature of 20 °C.
• The curves apply to the following kinematic viscosity: υ
= 1 mm2/s (1 cSt).
• Due to the risk of overheating, the pumps must not be
used at a flow rate below the minimum flow rate.
• The QH curves apply to a rated motor speed of a
three-phase mains-operated motor. For realistic
curves, go to Grundfos Product Center (http://product-
selection.grundfos.com/), and insert data.
The curve below shows the minimum flow rate as a
percentage of the rated flow rate in relation to the liquid
temperature. The dotted line shows a CR pump fitted with
an air-cooled top assembly.
Qm in
[ %]
30
20
10
TM012816
0
40 60 80 100 120 140 160 180 t [° C]
Minimum flow rate
29
10 CR, CRI, CRN
Performance curves and technical data
10. Performance curves and technical data
CR 1s
p H
[kPa] [m]
CR 1s
220
50 Hz
-36 ISO 9906:2012 Grade 3B
2000
200
-33
180
-30
1600
160 -27
140 -25
-23
1200 120 -21

-19
100 -17
-15
800 80
-13
-12
-11
60 -10
-9
-8
400 40 -7
-6
-5
-4
20 -3
-2
0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
0.00 0.05 0.10 0.15 0.20 0.25 0.30 Q [l/s]

P2 P2 Eta
[hp] [kW] [%]
Eta
0.04 0.03 30
P2
0.03
0.02 20
0.02
0.01 10
0.01
0.00 0.00 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
p H NPSH
[kPa] [m] [m]
60 QH 2900 rpm
6 6
40 4 4
20 2 NPSH 2
TM027424
0 0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
30
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
PN 25 / DN 25/32 A
B1
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
75
50
20
20
100 ø35 4 x ø13.5 100 75 4 x ø13.5
TM069591
141 180 145 180
250 220 160 220
Dimensions and weights

Dimension [mm] Net weight [kg]
Motor P2
Pump type Oval flange (A) DIN flange
[kW] D1 D2 Oval flange DIN flange
B1 B1+B2 B1 B1+B2
CR 1s-2 0.37 254 445 279 470 141 109 18 23
CR 1s-3 0.37 254 445 279 470 141 109 18 23
CR 1s-4 0.37 272 463 297 488 141 109 19 23
CR 1s-5 0.37 290 481 315 506 141 109 19 24
CR 1s-6 0.37 308 499 333 524 141 109 20 24
CR 1s-7 0.37 326 517 351 542 141 109 20 25
CR 1s-8 0.37 344 535 369 560 141 109 20 25
CR 1s-9 0.37 362 553 387 578 141 109 21 26
CR 1s-10 0.37 380 571 405 596 141 109 21 26
CR 1s-11 0.37 398 589 423 614 141 109 22 26
CR 1s-12 0.37 416 607 441 632 141 109 22 27
CR 1s-13 0.37 434 625 459 650 141 109 22 27
CR 1s-15 0.55 470 661 495 686 141 109 23 27
CR 1s-17 0.55 506 697 531 722 141 109 24 28
CR 1s-19 0.55 542 733 567 758 141 109 24 29
CR 1s-21 0.75 584 815 609 840 141 109 28 33
CR 1s-23 0.75 620 851 645 876 141 109 29 33
CR 1s-25 0.75 656 887 681 912 141 109 30 34
CR 1s-27 1.1 692 943 717 968 141 109 32 37
CR 1s-30 1.1 - - 771 1022 141 109 - 38
CR 1s-33 1.1 - - 825 1076 141 109 - 39
CR 1s-36 1.1 - - 879 1130 141 109 - 41
31
10 CR, CRI, CRN
CRI, CRN 1s
p H
[kPa] [m]
CRI, CRN 1s
220
50 Hz
-36 ISO 9906:2012 Grade 3B
2000
200
-33
180
-30
1600
160 -27
140 -25
-23
1200 120 -21

-19
100 -17
-15
800 80
-13
-12
-11
60 -10
-9
-8
400 40 -7
-6
-5
-4
20 -3
-2
0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
0.00 0.05 0.10 0.15 0.20 0.25 0.30 Q [l/s]

P2 P2 Eta
[hp] [kW] [%]
Eta
0.04 0.03 30
P2
0.03
0.02 20
0.02
0.01 10
0.01
0.00 0.00 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
p H NPSH
[kPa] [m] [m]
60 QH 2900 rpm
6 6
40 4 4
20 2 NPSH 2
TM027425
0 0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
32
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
P(PJE) PN 25 / DN 25/32 CA
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
ø59
75
50
50
TM069592
ø42.2
100 180 250 ø32 162 ø32
22
34
22
150 210 ø85

210

Motor P2
Pump type PJE/CA DIN flange
[kW] D1 D2 PJE/CA DIN flange
B1 B1+B2 B1 B1+B2
CRI/CRN 1s-2 0.37 257 448 282 473 141 109 16 20
CRI/CRN 1s-3 0.37 257 448 282 473 141 109 17 21
CRI/CRN 1s-4 0.37 275 466 300 491 141 109 17 21
CRI/CRN 1s-5 0.37 293 484 318 509 141 109 17 22
CRI/CRN 1s-6 0.37 311 502 336 527 141 109 18 22
CRI/CRN 1s-7 0.37 329 520 354 545 141 109 18 22
CRI/CRN 1s-8 0.37 347 538 372 563 141 109 19 23
CRI/CRN 1s-9 0.37 365 556 390 581 141 109 19 23
CRI/CRN 1s-10 0.37 383 574 408 599 141 109 19 24
CRI/CRN 1s-11 0.37 401 592 426 617 141 109 20 24
CRI/CRN 1s-12 0.37 419 610 444 635 141 109 20 24
CRI/CRN 1s-13 0.37 437 628 462 653 141 109 21 25
CRI/CRN 1s-15 0.55 473 664 498 689 141 109 21 25
CRI/CRN 1s-17 0.55 509 700 534 725 141 109 22 26
CRI/CRN 1s-19 0.55 545 736 570 761 141 109 22 27
CRI/CRN 1s-21 0.75 587 818 612 843 141 109 27 31
CRI/CRN 1s-23 0.75 623 854 648 879 141 109 27 32
CRI/CRN 1s-25 0.75 659 890 684 915 141 109 28 32
CRI/CRN 1s-27 1.1 695 946 720 971 141 109 31 35
CRI/CRN 1s-30 1.1 749 1000 774 1025 141 109 32 36
CRI/CRN 1s-33 1.1 803 1054 828 1079 141 109 33 38
CRI/CRN 1s-36 1.1 857 1108 882 1133 141 109 35 39
33
10 CR, CRI, CRN
CR 1
p H
[kPa] [m]
-36 CR 1
220
50 Hz
-33 ISO 9906:2012 Grade 3B
2000
200
-30
180
-27
1600
160
-25
-23
140
-21
1200 120 -19
-17
100
-15
800 80 -13
-12
-11
60 -10
-9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
0.0 0.1 0.2 0.3 0.4 0.5 0.6 Q [l/s]

P2 Eta
[kW] [%]
Eta
0.06 40
P2
0.03 20
0.00 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
H NPSH
[m] [m]
QH 2900 rpm
6 4
3 2
NPSH
0 0
TM027290
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
34
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
PN 25 / DN 25/32 A
B1
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
75
50
20
20
100 ø35 4 x ø13.5 100 75 4 x ø13.5
TM069591
141 180 145 180
250 220 160 220

Motor P2
B1 B1+B2 B1 B1+B2
CR 1-2 0.37 254 445 279 470 141 109 18 23
CR 1-3 0.37 254 445 279 470 141 109 18 23
CR 1-4 0.37 272 463 297 488 141 109 19 23
CR 1-5 0.37 290 481 315 506 141 109 19 24
CR 1-6 0.37 308 499 333 524 141 109 20 24
CR 1-7 0.37 326 517 351 542 141 109 20 25
CR 1-8 0.55 344 535 369 560 141 109 20 25
CR 1-9 0.55 362 553 387 578 141 109 21 25
CR 1-10 0.55 380 571 405 596 141 109 21 25
CR 1-11 0.55 398 589 423 614 141 109 21 26
CR 1-12 0.75 422 653 447 678 141 109 25 29
CR 1-13 0.75 440 671 465 696 141 109 25 30
CR 1-15 0.75 476 707 501 732 141 109 26 30
CR 1-17 1.1 512 763 537 788 141 109 29 33
CR 1-19 1.1 548 799 573 824 141 109 30 34
CR 1-21 1.1 584 835 609 860 141 109 30 35
CR 1-23 1.1 620 871 645 896 141 109 31 36
CR 1-25 1.5 - - 697 978 178 110 - 43
CR 1-27 1.5 - - 733 1014 178 110 - 44
CR 1-30 1.5 - - 787 1068 178 110 - 45
CR 1-33 2.2 - - 841 1162 178 110 - 50
CR 1-36 2.2 - - 895 1216 178 110 - 51
35
10 CR, CRI, CRN
CRI, CRN 1
p H
[kPa] [m]
-36 CRI, CRN 1
220
50 Hz
-33 ISO 9906:2012 Grade 3B
2000
200
-30
180
-27
1600
160
-25
-23
140
-21
1200 120 -19
-17
100
-15
800 80 -13
-12
-11
60 -10
-9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
0.0 0.1 0.2 0.3 0.4 0.5 0.6 Q [l/s]

P2 Eta
[kW] [%]
Eta
0.06 40
P2
0.03 20
0.00 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
H NPSH
[m] [m]
QH 2900 rpm
6 4
3 2
NPSH
0 0
TM027291
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
36
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
P(PJE) PN 25 / DN 25/32 CA
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
ø59
75
50
50
TM069592
ø42.2
100 180 250 ø32 162 ø32
22
34
22
150 210 ø85

210

Motor P2
B1 B1+B2 B1 B1+B2
CRI/CRN 1-2 0.37 257 448 282 473 141 109 16 21
CRI/CRN 1-3 0.37 257 448 282 473 141 109 17 21
CRI/CRN 1-4 0.37 275 466 300 491 141 109 17 21
CRI/CRN 1-5 0.37 293 484 318 509 141 109 17 22
CRI/CRN 1-6 0.37 311 502 336 527 141 109 18 22
CRI/CRN 1-7 0.37 329 520 354 545 141 109 18 22
CRI/CRN 1-8 0.55 347 538 372 563 141 109 18 22
CRI/CRN 1-9 0.55 365 556 390 581 141 109 19 23
CRI/CRN 1-10 0.55 383 574 408 599 141 109 19 23
CRI/CRN 1-11 0.55 401 592 426 617 141 109 19 23
CRI/CRN 1-12 0.75 425 656 450 681 141 109 23 27
CRI/CRN 1-13 0.75 443 674 468 699 141 109 24 28
CRI/CRN 1-15 0.75 479 710 504 735 141 109 24 29
CRI/CRN 1-17 1.1 515 766 540 791 141 109 27 31
CRI/CRN 1-19 1.1 551 802 576 827 141 109 28 32
CRI/CRN 1-21 1.1 587 838 612 863 141 109 29 33
CRI/CRN 1-23 1.1 623 874 648 899 141 109 30 34
CRI/CRN 1-25 1.5 675 956 700 981 178 110 36 40
CRI/CRN 1-27 1.5 711 992 736 1017 178 110 37 41
CRI/CRN 1-30 1.5 765 1046 790 1071 178 110 38 43
CRI/CRN 1-33 2.2 819 1140 844 1165 178 110 43 48
CRI/CRN 1-36 2.2 873 1194 898 1219 178 110 45 49
37
10 CR, CRI, CRN
CR 3
p H
[kPa] [m]
CR 3
240 -36
50 Hz
220
-33
2000 -31
200
-29
180 -27
1600 -25
160
-23
140
-21
-19
1200 120
-17
100 -15
800 -13
80 -12
-11
-10
60 -9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
0.0 0.2 0.4 0.6 0.8 1.0 1.2 Q [l/s]

P2 Eta
[kW] [%]
0.09 60
P2
0.06 Eta 40
0.03 20
0.00 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 6
4 4
2 NPSH 2
0 0
TM027292
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
38
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
PN 25 / DN 25/32 A
B1
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
75
50
20
20
100 ø35 4 x ø13.5 100 75 4 x ø13.5
TM069591
141 180 145 180
250 220 160 220

Motor P2
B1 B1+B2 B1 B1+B2
CR 3-2 0.37 254 445 279 470 141 109 18 23
CR 3-3 0.37 254 445 279 470 141 109 18 23
CR 3-4 0.37 272 463 297 488 141 109 19 23
CR 3-5 0.37 290 481 315 506 141 109 19 24
CR 3-6 0.55 308 499 333 524 141 109 19 24
CR 3-7 0.55 326 517 351 542 141 109 20 24
CR 3-8 0.75 350 581 375 606 141 109 23 28
CR 3-9 0.75 368 599 393 624 141 109 23 28
CR 3-10 0.75 386 617 411 642 141 109 24 28
CR 3-11 1.1 404 655 429 680 141 109 26 31
CR 3-12 1.1 422 673 447 698 141 109 27 31
CR 3-13 1.1 440 691 465 716 141 109 27 32
CR 3-15 1.1 476 727 501 752 141 109 28 32
CR 3-17 1.5 528 809 553 834 178 110 35 40
CR 3-19 1.5 564 845 589 870 178 110 36 41
CR 3-21 2.2 600 921 625 946 178 110 41 45
CR 3-23 2.2 636 957 661 982 178 110 41 46
CR 3-25 2.2 - - 697 1018 178 110 - 47
CR 3-27 2.2 - - 733 1054 178 110 - 48
CR 3-29 2.2 - - 769 1090 178 110 - 49
CR 3-31 3 - - 809 1144 198 120 - 54
CR 3-33 3 - - 845 1180 198 120 - 55
CR 3-36 3 - - 899 1234 198 120 - 57
39
10 CR, CRI, CRN
CRI, CRN 3
p H
[kPa] [m]
CRI, CRN 3
240 -36
50 Hz
220
-33
2000 -31
200
-29
180 -27
1600 -25
160
-23
140
-21
-19
1200 120
-17
100 -15
800 -13
80 -12
-11
-10
60 -9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
0.0 0.2 0.4 0.6 0.8 1.0 1.2 Q [l/s]

P2 Eta
[kW] [%]
0.09 60
P2
0.06 Eta 40
0.03 20
0.00 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 3
4 2
NPSH
2 1
0 0
TM027293
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
40
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
FGJ(DIN-ANSI-JIS)
P(PJE) PN 25 / DN 25/32 CA
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
ø59
75
50
50
TM069592
ø42.2
100 180 250 ø32 162 ø32
22
34
22
150 210 ø85

210

Motor P2
B1 B1+B2 B1 B1+B2
CRI/CRN 3-2 0.37 257 448 282 473 141 109 16 21
CRI/CRN 3-3 0.37 257 448 282 473 141 109 17 21
CRI/CRN 3-4 0.37 275 466 300 491 141 109 17 21
CRI/CRN 3-5 0.37 293 484 318 509 141 109 17 22
CRI/CRN 3-6 0.55 311 502 336 527 141 109 17 22
CRI/CRN 3-7 0.55 329 520 354 545 141 109 18 22
CRI/CRN 3-8 0.75 353 584 378 609 141 109 22 26
CRI/CRN 3-9 0.75 371 602 396 627 141 109 22 26
CRI/CRN 3-10 0.75 389 620 414 645 141 109 22 27
CRI/CRN 3-11 1.1 407 658 432 683 141 109 25 29
CRI/CRN 3-12 1.1 425 676 450 701 141 109 25 29
CRI/CRN 3-13 1.1 443 694 468 719 141 109 26 30
CRI/CRN 3-15 1.1 479 730 504 755 141 109 26 31
CRI/CRN 3-17 1.5 531 812 556 837 178 110 33 37
CRI/CRN 3-19 1.5 567 848 592 873 178 110 34 38
CRI/CRN 3-21 2.2 603 924 628 949 178 110 39 43
CRI/CRN 3-23 2.2 639 960 664 985 178 110 39 43
CRI/CRN 3-25 2.2 675 996 700 1021 178 110 40 44
CRI/CRN 3-27 2.2 711 1032 736 1057 178 110 41 45
CRI/CRN 3-29 2.2 747 1068 772 1093 178 110 42 46
CRI/CRN 3-31 3 788 1123 813 1148 198 120 48 52
CRI/CRN 3-33 3 824 1159 849 1184 198 120 49 53
CRI/CRN 3-36 3 878 1213 903 1238 198 120 50 54
41
10 CR, CRI, CRN
CR 5
p H
[kPa] [m]
260
CR 5
-36 50 Hz
2400
240 ISO 9906:2012 Grade 3B
220
-32
2000 -29
200
180
-26
-24
1600 160
-22
140 -20
1200 120 -18

-16
100 -15
-14
-13
800 80 -12
-11
-10
60 -9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
0.0 0.5 1.0 1.5 2.0 2.5 Q [l/s]

P2 Eta
[kW] [%]
Eta
0.15 60
P2
0.10 40
0.05 20
0.00 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 6
4 4
2 NPSH 2
TM027294
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
42
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2
D3
FGJ (DIN-ANSI-JIS) A
PN 25 / DN 25/32
B1
G 1/2 19 x 24.5
G 1/2 Rp 1 1/4"
ø100 22 M10 x 40
ø140
ø89
75
20
50
TM069593
20
100 ø35 4 x ø13.5 100 75 4 x ø13.5

141 180 145 180
250 220 160 220

Motor P2
[kW] D1 D2 D3 Oval flange DIN flange
B1 B1+B2 B1 B1+B2
CR 5-2 0.37 254 445 279 470 141 109 - 18 23
CR 5-3 0.55 281 472 306 497 141 109 - 19 23
CR 5-4 0.55 308 499 333 524 141 109 - 19 24
CR 5-5 0.75 341 572 366 597 141 109 - 23 27
CR 5-6 1.1 368 619 393 644 141 109 - 25 30
CR 5-7 1.1 395 646 420 671 141 109 - 26 30
CR 5-8 1.1 422 673 447 698 141 109 - 26 31
CR 5-9 1.5 465 746 490 771 178 110 - 33 38
CR 5-10 1.5 492 773 517 798 178 110 - 34 39
CR 5-11 2.2 519 840 544 865 178 110 - 38 43
CR 5-12 2.2 546 867 571 892 178 110 - 39 44
CR 5-13 2.2 573 894 598 919 178 110 - 40 44
CR 5-14 2.2 600 921 625 946 178 110 - 40 45
CR 5-15 2.2 627 948 652 973 178 110 - 41 45
CR 5-16 2.2 654 975 679 1000 178 110 - 41 46
CR 5-18 3 712 1047 737 1072 198 120 - 48 52
CR 5-20 3 766 1101 791 1126 198 120 - 49 53
CR 5-22 4 820 1192 845 1217 220 134 - 62 66
CR 5-24 4 - - 899 1271 220 134 - - 67
CR 5-26 4 - - 953 1325 220 134 - - 69
CR 5-29 4 - - 1034 1406 220 134 - - 70
CR 5-32 5.5 - - 1145 1536 220 134 300 - 83
CR 5-36 5.5 - - 1253 1644 220 134 300 - 85
43
10 CR, CRI, CRN
CRI, CRN 5
p H
[kPa] [m]
260
CRI, CRN 5
-36 50 Hz
2400
240 ISO 9906:2012 Grade 3B
220
-32
2000 -29
200
180
-26
-24
1600 160
-22
140 -20
1200 120 -18

-16
100 -15
-14
-13
800 80 -12
-11
-10
60 -9
-8
-7
400 40 -6
-5
-4
20 -3
-2
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
0.0 0.5 1.0 1.5 2.0 2.5 Q [l/s]

P2 Eta
[kW] [%]
Eta
0.15 60
P2
0.10 40
0.05 20
0.00 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 6
4 4
2 2
NPSH
0 0
TM027295
0 1 2 3 4 5 6 7 8 Q [m³/h]
44
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2
D3
FGJ (DIN-ANSI-JIS)
CA
B1
P (PJE) PN 25 / DN 25/32
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
ø59
75
50
ø42.2
TM069594
100 180 250 ø32 162 ø32
50
34
22
22
150 210 ø85
210

Net weight
Dimension [mm]
Motor P2 [kg]
Pump type
[kW] PJE/CA DIN flange
D1 D2 D3 PJE/CA DIN flange
B1 B1+B2 B1 B1+B2
CRI/CRN 5-2 0.37 257 448 282 473 141 109 - 17 21
CRI/CRN 5-3 0.55 284 475 309 500 141 109 - 17 21
CRI/CRN 5-4 0.55 311 502 336 527 141 109 - 17 21
CRI/CRN 5-5 0.75 344 575 369 600 141 109 - 21 25
CRI/CRN 5-6 1.1 371 622 396 647 141 109 - 24 28
CRI/CRN 5-7 1.1 398 649 423 674 141 109 - 24 29
CRI/CRN 5-8 1.1 425 676 450 701 141 109 - 25 29
CRI/CRN 5-9 1.5 468 749 493 774 178 110 - 31 36
CRI/CRN 5-10 1.5 495 776 520 801 178 110 - 32 36
CRI/CRN 5-11 2.2 522 843 547 868 178 110 - 36 40
CRI/CRN 5-12 2.2 549 870 574 895 178 110 - 37 41
CRI/CRN 5-13 2.2 576 897 601 922 178 110 - 37 42
CRI/CRN 5-14 2.2 603 924 628 949 178 110 - 38 42
CRI/CRN 5-15 2.2 630 951 655 976 178 110 - 39 43
CRI/CRN 5-16 2.2 657 978 682 1003 178 110 - 39 43
CRI/CRN 5-18 3 716 1051 741 1076 198 120 - 46 50
CRI/CRN 5-20 3 770 1105 795 1130 198 120 - 47 51
CRI/CRN 5-22 4 824 1196 849 1221 220 134 - 60 64
CRI/CRN 5-24 4 878 1250 903 1275 220 134 - 61 65
CRI/CRN 5-26 4 932 1304 957 1329 220 134 - 62 66
CRI/CRN 5-29 4 1013 1385 1038 1410 220 134 - 64 68
CRI/CRN 5-32 5.5 1123 1514 1148 1539 220 134 300 76 80
CRI/CRN 5-36 5.5 1231 1622 1256 1647 220 134 300 78 82
45
10 CR, CRI, CRN
CR 10
p H
[kPa] [m]
CR 10
240
-22
50 Hz
220
-20
2000
200
-18
180
-16
1600
160
-14
140
-12
1200 120
-10
100
-9
-8
800 80
-7
-6
60
-5
-4
400 40
-3
-2
20
-1
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q [l/s]

P2 Eta
[kW] [%]
0.4 80
Eta
0.3 P2 60
0.2 40
0.1 20
0.0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
H NPSH
[m] [m]
12 6
2900 rpm
8 4
NPSH
4 2
0 0
TM027296
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
46
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2 G 1/2 D3
FJ (DIN-JIS) A
PN 16-25 / DN 40
B1
Rp 1 1/2"
G 1/2 18 x 20.2 G 1/2
27 M16 x 45
ø39
ø150
ø114
4 x ø13.5
80
80
20
4 x ø13.5 130
20
ø110 100
TM069595
130
178 215 178 215
280 256 200 256

Motor P2
B1 B1+B2 B1 B1+B2
CR 10-1 0.37 343 534 343 534 141 109 - 31 34
CR 10-2 0.75 347 578 347 578 141 109 - 34 36
CR 10-3 1.1 377 628 377 628 141 109 - 37 39
CR 10-4 1.5 423 704 423 704 178 110 - 44 47
CR 10-5 2.2 453 774 453 774 178 110 - 49 52
CR 10-6 2.2 483 804 483 804 178 110 - 50 53
CR 10-7 3 518 853 518 853 198 120 - 56 59
CR 10-8 3 548 883 548 883 198 120 - 57 60
CR 10-9 3 578 913 578 913 198 120 - 58 61
CR 10-10 4 608 980 608 980 220 134 - 71 74
CR 10-12 4 668 1040 668 1040 220 134 - 73 76
CR 10-14 5.5 760 1151 760 1151 220 134 300 92 94
CR 10-16 5.5 820 1211 820 1211 220 134 300 94 97
CR 10-18 7.5 - - 880 1259 260 159 300 - 109
CR 10-20 7.5 - - 940 1319 260 159 300 - 112
CR 10-22 7.5 - - 1000 1379 260 159 300 - 114
47
10 CR, CRI, CRN
CRI, CRN 10
p H
[kPa] [m]
CRI, CRN 10
240
-22
50 Hz
220
-20
2000
200
-18
180
-16
1600
160
-14
140
-12
1200 120
-10
100
-9
-8
800 80
-7
-6
60
-5
-4
400 40
-3
-2
20
-1
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q [l/s]

P2 Eta
[kW] [%]
0.4 80
Eta
0.3 P2 60
0.2 40
0.1 20
0.0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
H NPSH
[m] [m]
12 6
2900 rpm
8 4
NPSH
4 2
0 0
TM027297
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
48
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
P (PJE) PN 16-25 / DN 40 CA
B1
18.5 x 23.5
G 1/2
G 1/2 4 x ø13 202
ø150
ø115
ø87
4 x ø13
26
80
80
80
ø60.1
215 ø42 ø50
26
130 130 130
26
TM069596
200 248 200 ø105 200 215
261 280 215 248
248

Net weight
Dimension [mm]
Motor P2 [kg]
Pump type
B1 B1+B2 B1 B1+B2
CRI/CRN 10-1 0.37 353 544 353 544 141 109 - 29 32
CRI/CRN 10-2 0.75 357 588 357 588 141 109 - 31 35
CRI/CRN 10-3 1.1 387 638 387 638 141 109 - 34 38
CRI/CRN 10-4 1.5 433 714 433 714 178 110 - 42 45
CRI/CRN 10-5 2.2 463 784 463 784 178 110 - 47 50
CRI/CRN 10-6 2.2 493 814 493 814 178 110 - 48 51
CRI/CRN 10-7 3 528 863 528 863 198 120 - 54 58
CRI/CRN 10-8 3 558 893 558 893 198 120 - 55 59
CRI/CRN 10-9 3 588 923 588 923 198 120 - 56 60
CRI/CRN 10-10 4 618 990 618 990 220 134 - 69 73
CRI/CRN 10-12 4 678 1050 678 1050 220 134 - 71 75
CRI/CRN 10-14 5.5 770 1161 770 1161 220 134 300 90 94
CRI/CRN 10-16 5.5 830 1221 830 1221 220 134 300 92 96
CRI/CRN 10-18 7.5 890 1269 890 1269 260 159 300 104 108
CRI/CRN 10-20 7.5 950 1329 950 1329 260 159 300 106 110
CRI/CRN 10-22 7.5 1010 1389 1010 1389 260 159 300 108 112
49
10 CR, CRI, CRN
CR 15
p H
[kPa] [m]
-17 CR 15
240
50 Hz
220
2000 -14
200
180
-12
1600
160
-10
140
-9
1200 120
-8
-7
100
-6
800 80
-5
60 -4
-3
400 40
-2
20 -1
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
0 1 2 3 4 5 6 Q [l/s]
P2 Eta
[kW] [%]
0.8 80
P2
Eta
0.6 60
0.4 40
0.2 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 NPSH 2
0 0
TM027298
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
50
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2 D3
F (DIN)
GJ (ANSI-JIS) A
PN 16-25 / DN 50
G 1/2
B1
ø18.1 18 x 21.5 Rp 2"

4 x ø13.5 M16 x 45
G 1/2 G 1/2 30
ø65
ø125
ø165
ø165
ø127
90
90
90
130
20
ø65 ø120
TM069597
20
20
130 130 130
176 215 215 178 215
176
300 256 256 200 256
300

Motor P2
B1 B1+B2 B1 B1+B2
CR 15-1 1.1 400 651 400 651 141 109 - 41 42
CR 15-2 2.2 415 736 415 736 178 110 - 52 53
CR 15-3 3 465 800 465 800 198 120 - 58 59
CR 15-4 4 510 882 510 882 220 134 - 71 72
CR 15-5 4 555 927 555 927 220 134 - 73 74
CR 15-6 5.5 632 1023 632 1023 220 134 300 91 92
CR 15-7 5.5 677 1068 677 1068 220 134 300 93 94
CR 15-8 7.5 - - 722 1101 260 159 300 - 105
CR 15-9 7.5 - - 767 1146 260 159 300 - 107
CR 15-10 11 - - 889 1371 318 204 350 - 149
CR 15-12 11 - - 979 1461 318 204 350 - 153
CR 15-14 11 - - 1069 1551 318 204 350 - 157
CR 15-17 15 - - 1204 1686 318 204 350 - 174
51
10 CR, CRI, CRN
CRI, CRN 15
p H
[kPa] [m]
-17 CRI, CRN 15
240
50 Hz
220
2000 -14
200
180
-12
1600
160
-10
140
-9
1200 120
-8
-7
100
-6
800 80
-5
60 -4
-3
400 40
-2
20 -1
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
0 1 2 3 4 5 6 Q [l/s]
P2 Eta
[kW] [%]
0.8 80
P2
Eta
0.6 60
0.4 40
0.2 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 NPSH 2
0 0
TM027299
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
52
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
PN 16-25 / DN 40
P (PJE) CA
B1
G 1/2 18.5 x 21.8

G 1/2 4 x ø13
202
ø127
ø165
ø87
26
26
90
90
90
ø60.1
26
130 215 130 ø65 130 ø50
TM069598
200 248 200 ø120.5 200 215
261 300 215 248
248

Net weight
Dimension [mm]
Motor P2 [kg]
Pump type
B1 B1+B2 B1 B1+B2
CRI/CRN 15-1 1.1 397 648 397 648 141 109 - 34 39
CRI/CRN 15-2 2.2 413 734 413 734 178 110 - 45 50
CRI/CRN 15-3 3 463 798 463 798 198 120 - 52 56
CRI/CRN 15-4 4 508 880 508 880 220 134 - 65 70
CRI/CRN 15-5 4 553 925 553 925 220 134 - 67 71
CRI/CRN 15-6 5.5 630 1021 630 1021 220 134 300 85 89
CRI/CRN 15-7 5.5 675 1066 675 1066 220 134 300 86 91
CRI/CRN 15-8 7.5 720 1099 720 1099 260 159 300 98 103
CRI/CRN 15-9 7.5 765 1144 765 1144 260 159 300 100 104
CRI/CRN 15-10 11 887 1369 887 1369 318 204 350 142 147
CRI/CRN 15-12 11 977 1459 977 1459 318 204 350 145 150
CRI/CRN 15-14 11 1067 1549 1067 1549 318 204 350 149 153
CRI/CRN 15-17 15 1202 1684 1202 1684 318 204 350 165 170
53
10 CR, CRI, CRN
CR 20
p H
[kPa] [m]
260
CR 20
-17
50 Hz
2400
240 ISO 9906:2012 Grade 3B
220
-14
2000
200
180 -12
1600 160
-10
140
1200 120 -8
-7
100
-6
800 80 -5
60 -4
-3
400 40
-2
20 -1
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
0 1 2 3 4 5 6 7 8 Q [l/s]
P2 Eta
[kW] [%]
1.6 80
1.2 Eta 60
P2
0.8 40
0.4 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 2
NPSH
0 0
TM027300
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
54
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2 D3
F (DIN)
GJ (ANSI-JIS) A
PN 16-25 / DN 50
G 1/2
B1
ø18.1 18 x 21.5 Rp 2"

4 x ø13.5 M16 x 45
G 1/2 G 1/2 30
ø65
ø125
ø165
ø165
ø127
90
90
90
130
20
ø65 ø120
TM069597
20
20
130 130 130
176 215 215 178 215
176
300 256 256 200 256
300

Motor P2
B1 B1+B2 B1 B1+B2
CR 20-1 1.1 400 651 400 651 141 109 - 41 42
CR 20-2 2.2 415 736 415 736 178 110 - 52 53
CR 20-3 4 465 837 465 837 220 134 - 70 71
CR 20-4 5.5 542 933 542 933 220 134 300 88 89
CR 20-5 5.5 587 978 587 978 220 134 300 90 90
CR 20-6 7.5 632 1011 632 1011 260 159 300 101 102
CR 20-7 7.5 677 1056 677 1056 260 159 300 103 103
CR 20-8 11 - - 799 1281 318 204 350 - 146
CR 20-10 11 - - 889 1371 318 204 350 - 149
CR 20-12 15 - - 979 1461 318 204 350 - 165
CR 20-14 15 - - 1069 1551 318 204 350 - 169
CR 20-17 18.5 - - 1204 1730 318 204 350 - 186
55
10 CR, CRI, CRN
CRI, CRN 20
p H
[kPa] [m]
260
CRI, CRN 20
-17
50 Hz
2400
240 ISO 9906:2012 Grade 3B
220
-14
2000
200
180 -12
1600 160
-10
140
1200 120 -8
-7
100
-6
800 80 -5
60 -4
-3
400 40
-2
20 -1
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
0 1 2 3 4 5 6 7 8 Q [l/s]
P2 Eta
[kW] [%]
1.6 80
1.2 Eta 60
P2
0.8 40
0.4 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 NPSH 2
0 0
TM027301
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
56
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
PN 16-25 / DN 40
P (PJE) CA
B1
G 1/2 18.5 x 21.8

G 1/2 4 x ø13
202
ø127
ø165
ø87
26
26
90
90
90
ø60.1
26
130 215 130 ø65 130 ø50
TM069598
200 248 200 ø120.5 200 215
261 300 215 248
248

Net weight
Dimension [mm]
Motor P2 [kg]
Pump type
B1 B1+B2 B1 B1+B2
CRI/CRN 20-1 1.1 397 648 397 648 141 109 - 34 39
CRI/CRN 20-2 2.2 413 734 413 734 178 110 - 45 50
CRI/CRN 20-3 4 463 835 463 835 220 134 - 63 68
CRI/CRN 20-4 5.5 540 931 540 931 220 134 300 82 86
CRI/CRN 20-5 5.5 585 976 585 976 220 134 300 83 88
CRI/CRN 20-6 7.5 630 1009 630 1009 260 159 300 94 99
CRI/CRN 20-7 7.5 675 1054 675 1054 260 159 300 96 101
CRI/CRN 20-8 11 797 1279 797 1279 318 204 350 138 143
CRI/CRN 20-10 11 887 1369 887 1369 318 204 350 142 147
CRI/CRN 20-12 15 977 1459 977 1459 318 204 350 157 162
CRI/CRN 20-14 15 1067 1549 1067 1549 318 204 350 161 165
CRI/CRN 20-17 18.5 1202 1728 1202 1728 318 204 350 178 183
57
10 CR, CRI, CRN
CR 32
p H
[MPa] [m]
280 -14
CRN 32
-14-2
50 Hz
260 -13 ISO 9906:2012 Grade 3B
-13-2
2.4
240 -12
-12-2
220 -11
-11-2
2.0
200 -10
-10-2
180 -9
-9-2
1.6 160 -8
-8-2
140 -7
-7-2
1.2 120 -6
-6-2
100 -5
-5-2
0.8 80 -4
-4-2
60 -3
-3-2
0.4 40 -2
-2-2
20 -1
-1-1
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0 2 4 6 8 10 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
2.0 Eta 80
2.4 P2 1/1
1.5 60
P2 2/3
1.6
1.0 40
0.8 0.5 20
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
200 20 QH 2900 rpm 1/1 8
160 QH 2900 rpm 2/3
15 6
120
10 4
80
5 NPSH 2
40
0 0 0
TM027303
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
58
CR, CRI, CRN
10
Dimensional sketch

D2
D1
D2
D1
B2
B2 D3
G 1/2
F (DIN)
PN 16-25-40 / DN 65
B1
G 1/2
8 x ø18
G 1/2
ø107
ø145
185
30
105
ø74 4 x ø14
TM069605
170 240
223 298
320

Motor P2 Dimension [mm] Net weight
Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CR 32-1-1 1.5 505 786 178 110 - 63

CR 32-1 2.2 505 826 178 110 - 67
CR 32-2-2 3 575 910 198 120 - 75
CR 32-2 4 575 947 220 134 - 86
CR 32-3-2 5.5 645 1036 220 134 300 97
CR 32-3 5.5 645 1036 220 134 300 97
CR 32-4-2 7.5 715 1094 260 159 300 110
CR 32-4 7.5 715 1094 260 159 300 110
CR 32-5-2 11 895 1377 318 204 350 158
CR 32-5 11 895 1377 318 204 350 158
CR 32-6-2 11 965 1447 318 204 350 161
CR 32-6 11 965 1447 318 204 350 161
CR 32-7-2 15 1035 1517 318 204 350 176
CR 32-7 15 1035 1517 318 204 350 176
CR 32-8-2 15 1105 1587 318 204 350 182
CR 32-8 15 1105 1587 318 204 350 182
CR 32-9-2 18.5 1175 1701 318 204 350 198
CR 32-9 18.5 1175 1701 318 204 350 198
CR 32-10-2 18.5 1245 1771 318 204 350 201
CR 32-10 18.5 1245 1771 318 204 350 201
CR 32-11-2 22 1315 1867 318 204 350 220
CR 32-11 22 1315 1867 318 204 350 220
CR 32-12-2 22 1385 1937 318 204 350 223
CR 32-12 22 1385 1937 318 204 350 223
CR 32-13-2 30 1455 2066 396 315 400 329
CR 32-13 30 1455 2066 396 315 400 329
CR 32-14-2 30 1525 2136 396 315 400 332
CR 32-14 30 1525 2136 396 315 400 332
59
10 CR, CRI, CRN
CRN 32
p H
[MPa] [m]
280 -14
CRN 32
-14-2
50 Hz
260 -13 ISO 9906:2012 Grade 3B
-13-2
2.4
240 -12
-12-2
220 -11
-11-2
2.0
200 -10
-10-2
180 -9
-9-2
1.6 160 -8
-8-2
140 -7
-7-2
1.2 120 -6
-6-2
100 -5
-5-2
0.8 80 -4
-4-2
60 -3
-3-2
0.4 40 -2
-2-2
20 -1
-1-1
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0 2 4 6 8 10 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
2.0 Eta 80
2.4 P2 1/1
1.5 60
P2 2/3
1.6
1.0 40
0.8 0.5 20
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
200 20 QH 2900 rpm 1/1 8
160 QH 2900 rpm 2/3
15 6
120
10 4
80
5 NPSH 2
40
0 0 0
TM027303
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
60
CR, CRI, CRN
10
Dimensional sketch

D2 D2
D1 D1
B2
B2
D3 D3
G 1/2
G 1/2 F (DIN)
P (PJE)
PN 16-25-40 / DN 65
B1
B1
8 x ø18
G 1/2 G 1/2
ø89
G 1/2 ø107 G 1/2
ø145
ø185
30
105
105
4 x ø14
30
TM078956
ø74 170 ø74
170
4 x ø14
226 240 226 240
320 298
320 298

Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CRN 32-1-1 1.5 505 786 178 110 - 65

CRN 32-1 2.2 505 826 178 110 - 69
CRN 32-2-2 3 575 910 198 120 - 77
CRN 32-2 4 575 947 220 134 - 89
CRN 32-3-2 5.5 645 1036 220 134 300 99
CRN 32-3 5.5 645 1036 220 134 300 99
CRN 32-4-2 7.5 715 1094 260 159 300 112
CRN 32-4 7.5 715 1094 260 159 300 112
CRN 32-5-2 11 895 1377 318 204 350 160
CRN 32-5 11 895 1377 318 204 350 160
CRN 32-6-2 11 965 1447 318 204 350 163
CRN 32-6 11 965 1447 318 204 350 163
CRN 32-7-2 15 1035 1517 318 204 350 178
CRN 32-7 15 1035 1517 318 204 350 178
CRN 32-8-2 15 1105 1587 318 204 350 184
CRN 32-8 15 1105 1587 318 204 350 184
CRN 32-9-2 18.5 1175 1701 318 204 350 200
CRN 32-9 18.5 1175 1701 318 204 350 200
CRN 32-10-2 18.5 1245 1771 318 204 350 204
CRN 32-10 18.5 1245 1771 318 204 350 204
CRN 32-11-2 22 1315 1867 318 204 350 222
CRN 32-11 22 1315 1867 318 204 350 222
CRN 32-12-2 22 1385 1937 318 204 350 225
CRN 32-12 22 1385 1937 318 204 350 225
CRN 32-13-2 30 1455 2066 396 315 400 331
CRN 32-13 30 1455 2066 396 315 400 331
CRN 32-14-2 30 1525 2136 396 315 400 335
CRN 32-14 30 1525 2136 396 315 400 335
61
10 CR, CRI, CRN
CR 45
p H
[MPa] [m]
340 CR 45
-13-2
3.2 50 Hz
320
-12 ISO 9906:2012 Grade 3B
-12-2
300
2.8 -11
280 -11-2
260 -10
-10-2
2.4
240
-9
-9-2
220
-8
2.0 200 -8-2
180 -7
-7-2
1.6 160
-6
-6-2
140
-5
1.2 120 -5-2
-4
100
-4-2
0.8 80 -3
-3-2
60
-2
0.4 40 -2-2
-1
20 -1-1
0.0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
0 2 4 6 8 10 12 14 16 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
4 Eta 80
P2 1/1
4 3 60
P2 2/3
2 40
2
1 20
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
25 10
QH 2900 rpm 2/3
200 20 8
150 15 6
100 10 4
50 5 NPSH 2
0 0 0
TM027304
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
62
CR, CRI, CRN
10
Dimensional sketch

D2
D1
B2
D3
G 1/2
F (DIN)
PN 16-25-40 / DN 80
B1
G 1/2 8 x ø18
G 1/2
ø120
ø160
ø200
45
140
TM069600
190 ø80 4 x ø14
248 266
365 331

Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CR 45-1-1 3 559 894 198 120 - 82

CR 45-1 4 559 931 220 134 - 93
CR 45-2-2 5.5 639 1030 220 134 300 104
CR 45-2 7.5 639 1018 260 159 300 114
CR 45-3-2 11 829 1311 318 204 350 163
CR 45-3 11 829 1311 318 204 350 163
CR 45-4-2 15 909 1391 318 204 350 179
CR 45-4 15 909 1391 318 204 350 179
CR 45-5-2 18.5 989 1515 318 204 350 195
CR 45-5 18.5 989 1515 318 204 350 195
CR 45-6-2 22 1069 1621 318 204 350 217
CR 45-6 22 1069 1621 318 204 350 217
CR 45-7-2 30 1149 1760 396 315 400 324
CR 45-7 30 1149 1760 396 315 400 324
CR 45-8-2 30 1229 1840 396 315 400 328
CR 45-8 30 1229 1840 396 315 400 328
CR 45-9-2 30 1309 1920 396 315 400 332
CR 45-9 37 1309 1945 396 315 400 357
CR 45-10-2 37 1389 2025 396 315 400 362
CR 45-10 37 1389 2025 396 315 400 362
CR 45-11-2 45 1469 2177 449 338 450 455
CR 45-11 45 1469 2177 449 338 450 455
CR 45-12-2 45 1549 2257 449 338 450 460
CR 45-12 45 1549 2257 449 338 450 460
CR 45-13-2 45 1629 2337 449 338 450 464
63
10 CR, CRI, CRN
CRN 45
p H
[MPa] [m]
340 CRN 45
-13-2
3.2 50 Hz
320
-12 ISO 9906:2012 Grade 3B
-12-2
300
2.8 -11
280 -11-2
260 -10
-10-2
2.4
240
-9
-9-2
220
-8
2.0 200 -8-2
180 -7
-7-2
1.6 160
-6
-6-2
140
-5
1.2 120 -5-2
-4
100
-4-2
0.8 80 -3
-3-2
60
-2
0.4 40 -2-2
-1
20 -1-1
0.0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
0 2 4 6 8 10 12 14 16 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
4 Eta 80
P2 1/1
4 3 60
P2 2/3
2 40
2
1 20
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
25 10
QH 2900 rpm 2/3
200 20 8
150 15 6
100 10 4
50 5 NPSH 2
0 0 0
TM027305
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
64
CR, CRI, CRN
10
Dimensional sketch

D2
D2
D1 D1
B2
B2
P D3
G 1/2 G 1/2
F (DIN)
P (PJE) PN 16-25-40 / DN 80
B1
B1
G 1/2 8 x ø18
G 1/2
ø114
G 1/2
G 1/2
ø120
ø200
ø160
45
140
140
190 ø80 190 ø80 4 x ø14
45
4 x ø14
TM078957
251 266 251 266
365 331 365 331

Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CRN 45-1-1 3 559 894 198 120 - 82

CRN 45-1 4 559 931 220 134 - 94
CRN 45-2-2 5.5 639 1030 220 134 300 105
CRN 45-2 7.5 639 1018 260 159 300 114
CRN 45-3-2 11 829 1311 318 204 350 164
CRN 45-3 11 829 1311 318 204 350 164
CRN 45-4-2 15 909 1391 318 204 350 179
CRN 45-4 15 909 1391 318 204 350 179
CRN 45-5-2 18.5 989 1515 318 204 350 195
CRN 45-5 18.5 989 1515 318 204 350 195
CRN 45-6-2 22 1069 1621 318 204 350 217
CRN 45-6 22 1069 1621 318 204 350 217
CRN 45-7-2 30 1149 1760 396 315 400 324
CRN 45-7 30 1149 1760 396 315 400 324
CRN 45-8-2 30 1229 1840 396 315 400 328
CRN 45-8 30 1229 1840 396 315 400 328
CRN 45-9-2 30 1309 1920 396 315 400 333
CRN 45-9 37 1309 1945 396 315 400 358
CRN 45-10-2 37 1389 2025 396 315 400 362
CRN 45-10 37 1389 2025 396 315 400 362
CRN 45-11-2 45 1469 2177 449 338 450 455
CRN 45-11 45 1469 2177 449 338 450 455
CRN 45-12-2 45 1549 2257 449 338 450 460
CRN 45-12 45 1549 2257 449 338 450 460
CRN 45-13-2 45 1629 2337 449 338 450 464
65
10 CR, CRI, CRN
CR 64
p H
[MPa] [m]
CR 64
240
-8-1
50 Hz
-8-2 ISO 9906:2012 Grade 3B
220
-7
2.0
200 -7-1
-7-2
180 -6
-6-1
1.6 160 -6-2
-5
140 -5-1
-5-2
1.2 120 -4
-4-1
100 -4-2
-3
0.8 80 -3-1
-3-2
60 -2
-2-1
0.4 40 -2-2
-1
20 -1-1
0.0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
0 5 10 15 20 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 Eta
8 6 P2 1/1 60
6 4 P2 2/3 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 32 8
QH 2900 rpm 1/1
24 6
200 QH 2900 rpm 2/3
16 4
100 NPSH
8 2
0 0 0
TM027306
0 10 20 30 40 50 60 70 80 Q [m³/h]
66
CR, CRI, CRN
10
Dimensional sketch

D2
D1
F (DIN)
PN 25-40 / DN 100
8 x ø 22
B2
G 1/2
ø150
ø190
ø235
ø100 4 x ø 14
D3
45
266
331
G 1/2
F (DIN)
PN 16 / DN 100
G 1/2
B1
8 x ø 18
G 1/2
ø150
ø180
ø220
140
ø100 4 x ø 14
TM069606
45
190
248 266
365 331

Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CR 64-1-1 4 561 933 220 134 - 96

CR 64-1 5.5 561 952 220 134 300 103
CR 64-2-2 7.5 644 1023 260 159 300 117
CR 64-2-1 11 754 1236 318 204 350 162
CR 64-2 11 754 1236 318 204 350 162
CR 64-3-2 15 836 1318 318 204 350 179
CR 64-3-1 15 836 1318 318 204 350 179
CR 64-3 18.5 836 1362 318 204 350 191
CR 64-4-2 18.5 919 1445 318 204 350 196
CR 64-4-1 22 919 1471 318 204 350 211
CR 64-4 22 919 1471 318 204 350 211
CR 64-5-2 30 1001 1612 396 315 400 318
CR 64-5-1 30 1001 1612 396 315 400 318
CR 64-5 30 1001 1612 396 315 400 318
CR 64-6-2 30 1084 1695 396 315 400 324
CR 64-6-1 37 1084 1720 396 315 400 349
CR 64-6 37 1084 1720 396 315 400 349
CR 64-7-2 37 1166 1802 396 315 400 354
CR 64-7-1 37 1166 1802 396 315 400 354
CR 64-7 45 1166 1874 449 338 450 443
CR 64-8-2 45 1249 1957 449 338 450 448
CR 64-8-1 45 1249 1957 449 338 450 448
67
10 CR, CRI, CRN
CRN 64
p H
[MPa] [m]
CRN 64
240
-8-1
50 Hz
-8-2 ISO 9906:2012 Grade 3B
220
-7
2.0
200 -7-1
-7-2
180 -6
-6-1
1.6 160 -6-2
-5
140 -5-1
-5-2
1.2 120 -4
-4-1
100 -4-2
-3
0.8 80 -3-1
-3-2
60 -2
-2-1
0.4 40 -2-2
-1
20 -1-1
0.0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
0 5 10 15 20 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 Eta
8 6 P2 1/1 60
6 4 P2 2/3 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 32 8
QH 2900 rpm 1/1
24 6
200 QH 2900 rpm 2/3
16 4
100 NPSH
8 2
0 0 0
TM027307
0 10 20 30 40 50 60 70 80 Q [m³/h]
68
CR, CRI, CRN
10
Dimensional sketch

D2
D2
D1
D1
F (DIN)
PN 25-40 / DN 100
8 x ø22
B2
B2
G 1/2
ø235
ø190
ø150
P D3 ø100 4 x ø14
45
266
G 1/2 G 1/2 331
P (PJE) F (DIN)
PN 16 / DN 100
B1
G 1/2
B1
G 1/2 8 x ø18
ø114
G 1/2
G 1/2
ø150
ø180
ø220
45
45
140
140
190 ø80 ø100 4 x ø14
TM078958
4 x ø14 190
251 266 251 266
365 331 365 331

Pump type
[kW] B1 B1+B2 D1 D2 D3 [kg]
CRN 64-1-1 4 561 933 220 134 - 95

CRN 64-1 5.5 561 952 220 134 300 103
CRN 64-2-2 7.5 644 1023 260 159 300 117
CRN 64-2-1 11 754 1236 318 204 350 162
CRN 64-2 11 754 1236 318 204 350 162
CRN 64-3-2 15 836 1318 318 204 350 178
CRN 64-3-1 15 836 1318 318 204 350 178
CRN 64-3 18.5 836 1362 318 204 350 191
CRN 64-4-2 18.5 919 1445 318 204 350 196
CRN 64-4-1 22 919 1471 318 204 350 211
CRN 64-4 22 919 1471 318 204 350 211
CRN 64-5-2 30 1001 1612 396 315 400 318
CRN 64-5-1 30 1001 1612 396 315 400 318
CRN 64-5 30 1001 1612 396 315 400 318
CRN 64-6-2 30 1084 1695 396 315 400 325
CRN 64-6-1 37 1084 1720 396 315 400 350
CRN 64-6 37 1084 1720 396 315 400 350
CRN 64-7-2 37 1166 1802 396 315 400 354
CRN 64-7-1 37 1166 1802 396 315 400 354
CRN 64-7 45 1166 1874 449 338 450 444
CRN 64-8-2 45 1249 1957 449 338 450 448
CRN 64-8-1 45 1249 1957 449 338 450 448
69
10 CR, CRI, CRN
CR 95
p H
[MPa] [m]
240 -8-2 CR 95
230
2.2 -7 50 Hz
220
210
2.0
200
190 -6
1.8
180
170
1.6
160 -5
150
1.4 140
130 -4
1.2 120
110
1.0 100 -3
90
0.8 -3-2
80
70
-2
0.6 60
-2-2
50
0.4 40
-1
30 -1-1
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
0 5 10 15 20 25 30 35 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
16 80
12 60
8 P21/1 IS 2950 rpm 40
4 20
P22/3 IS 2950 rpm
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
H NPSH
[m] [m]
QH1/1 IS 2950 rpm
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065113
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
The pump efficiency (ETA) is based on a three-stage pump.
70
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2
F (DIN) F (DIN) F (DIN)

PN 16 / DN 100 PN 25 / DN 100 PN 40 / DN 100
B1
8x 18 8x 22 8x 22
G 1/2
G 1/2
150
180
220
150
190
235
150
190
235
4x 18.5 4x 18.5 4x 18.5
140
TM080551
225 100 100
40
100
40
40
275 350 350 350
380 419 419 419

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 95-1-1 5.5 689 1080 220 134 300 - 137

CR 95-1 7.5 689 1068 260 159 300 - 147
CR 95-2-2 11 795 1277 318 204 350 - 194
CR 95-2 15 795 1277 318 204 350 - 206
CR 95-3-2 18.5 900 1426 318 204 350 - 224
CR 95-3 22 900 1452 318 204 350 - 239
CR 95-4 30 1009 1620 396 315 400 492 348
CR 95-5 37 1114 1750 396 315 400 492 379
CR 95-6 45 1238 1946 449 338 450 573 480
CR 95-7 55 1342 2089 497 410 550 732 598
CR 95-8-2 55 1446 2193 497 410 550 732 604
71
10 CR, CRI, CRN
CRN 95
p H
[MPa] [m]
240 -8-2 CRN 95
230
2.2 -7
50 Hz
220
210
2.0
200
190 -6
1.8
180
170
1.6
160 -5
150
1.4 140
130 -4
1.2 120
110
1.0 100
-3
90
0.8 -3-2
80
70
-2
0.6 60
-2-2
50
0.4 40
-1
30 -1-1
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
0 5 10 15 20 25 30 35 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
16 80
12 60
8 P21/1 IS 2950 rpm 40
4 20
P22/3 IS 2950 rpm
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
H NPSH
[m] [m]
QH1/1 IS 2950 rpm
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065125
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h]
72
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
P (PJE) P (PJE)
B2
G 1/2 G 1/2
4x 18.5
14 0
D3 225 100
40
40
275 350
G 1/2 G 1/2 380 419

PN 16 / DN 100 PN 25 / DN 100 PN 40 / DN 100
B1
8x 18 8x 22 8x 22
G 1/2
G 1/2
150
190
235
150
190
235
150
180
220
4x 18.5 4x 18.5 4x 18.5

140
TM065094
225 100 100 100
40
40
40
275 350 350 350
380 419 419 41 9

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 95-1-1 5.5 689 1080 220 134 300 - 137

CRN 95-1 7.5 689 1068 260 159 300 - 147
CRN 95-2-2 11 795 1277 318 204 350 - 194
CRN 95-2 15 795 1277 318 204 350 - 206
CRN 95-3-2 18.5 900 1426 318 204 350 - 224
CRN 95-3 22 900 1452 318 204 350 - 239
CRN 95-4 30 1009 1620 396 315 400 492 348
CRN 95-5 37 1114 1750 396 315 400 492 379
CRN 95-6 45 1238 1946 449 338 450 573 480
CRN 95-7 55 1342 2089 497 410 550 732 598
CRN 95-8-2 55 1446 2193 497 410 550 732 604
73
10 CR, CRI, CRN
CR 125
p H
[MPa] [m]
180 CR 125
170 -5 50 Hz
1.6 ISO 9906:2012 Grade 3B
160
150
1.4
140
-4
130
1.2
120 -4-2
110
1.0 -3
100
-3-1
90
0.8 80
70 -2
0.6 60 -2-1
-2-2
50
0.4 40
-1
30
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
16 80
12 P21/1 IS 2950 rpm 60
8 P22/3 IS 2950 rpm 40
4 20
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
H NPSH
[m] [m]
40 8
QH1/1 IS 2950 rpm
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065114
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
74
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 150 PN 25 / DN 150 PN 40 / DN 150
B1
8x 22 8x 26 8x 26
G 1/2 G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080549
275 150 150 150
55
55
55
332 425 425 425
485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 125-1 11 783 1265 318 204 350 - 233

CR 125-2-2 15 905 1387 318 204 350 - 255
CR 125-2-1 18.5 905 1431 318 204 350 - 268
CR 125-2 22 905 1457 318 204 350 - 283
CR 125-3-1 30 1029 1640 396 315 400 492 396
CR 125-3 37 1029 1665 396 315 400 492 421
CR 125-4-2 37 1151 1787 396 315 400 492 432
CR 125-4 45 1174 1882 449 338 450 573 526
CR 125-5 55 1295 2042 497 410 550 732 647
75
10 CR, CRI, CRN
CRN 125
p H
[MPa] [m]
340 -10 CRN 125
320 50 Hz
3.0 -9
300
-9-2
280
-8
260
2.5
240 -7
220
2.0 -6
200
180
-5
160
1.5
140 -4
120 -4-2
1.0 -3
100
-3-1
80
-2
60 -2-1
0.5
40 -2-2
-1
20
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
16 80
12 P21/1 IS 2950 rpm 60
8 P22/3 IS 2950 rpm 40
4 20
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
H NPSH
[m] [m]
40 8
QH1/1 IS 2950 rpm
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065126
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
76
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
P (PJE) P (PJE)
B2
G 1/2 G 1/2
4x 22.5
180
275 150
D3
45
45
332 425
485 499
G 1/2 G 1/2

PN 16 / DN 150
B1
PN 25 / DN 150 PN 40 / DN 150
8x 22 8x 26 8x 26
G 1/2
G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080550
275 150 150 150
55
55
55
332 425 425 425

485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 125-1 11 783 1265 318 204 350 - 233

CRN 125-2-2 15 905 1387 318 204 350 - 255
CRN 125-2-1 18.5 905 1431 318 204 350 - 268
CRN 125-2 22 905 1457 318 204 350 - 283
CRN 125-3-1 30 1029 1640 396 315 400 492 396
CRN 125-3 37 1029 1665 396 315 400 492 421
CRN 125-4-2 37 1151 1787 396 315 400 492 432
CRN 125-4 45 1174 1882 449 338 450 573 526
CRN 125-5 55 1295 2042 497 410 550 732 647
CRN 125-6 75 1417 2237 551 433 550 732 771
CRN 125-7 75 1539 2359 551 433 550 732 782
CRN 125-8 90 1661 2591 551 433 550 732 872
CRN 125-9-2 90 1783 2713 551 433 550 732 882
CRN 125-9 110 1813 2725 616 515 660 848 1075
CRN 125-10 110 1935 2847 616 515 660 848 1085
77
10 CR, CRI, CRN
CR 155
p H
[MPa] [m]
150 CR 155
1.4 -4-1 50 Hz
140
130
1.2
120
-3
110
1.0
100 -3-2
90
0.8 80
-2
70
0.6 -2-2
60
50
0.4 40 -1
-1-1
30
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
20 80
15 60
10 P21/1 IS 2950 rpm 40

P22/3 IS 2950 rpm
5 20
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
H NPSH
[m] [m]
50 10
40 QH1/1 IS 2950 rpm 8
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065115
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
78
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 150 PN 25 / DN 150 PN 40 / DN 150
B1
8x 22 8x 26 8x 26
G 1/2 G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080549
275 150 150 150
55
55
55
332 425 425 425
485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 155-1-1 11 783 1265 318 204 350 - 234

CR 155-1 15 783 1265 318 204 350 - 245
CR 155-2-2 22 905 1457 318 204 350 - 284
CR 155-2 30 907 1518 396 315 400 492 387
CR 155-3-2 37 1029 1665 396 315 400 492 423
CR 155-3 45 1052 1760 449 338 450 573 517
CR 155-4-1 55 1173 1920 497 410 550 732 637
79
10 CR, CRI, CRN
CRN 155
p H
[MPa] [m]
3.0
300 CRN 155
-8-2 50 Hz
280
-7
260
2.5
240
-6
220
2.0
200
-5
180 -5-2
160
1.5
-4-1
140
120 -3
1.0 100 -3-2
80 -2
-2-2
60
0.5
40 -1
-1-1
20
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
20 80
15 60
10 P21/1 IS 2950 rpm 40

P22/3 IS 2950 rpm
5 20
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
H NPSH
[m] [m]
50 10
40 QH1/1 IS 2950 rpm 8
30 6
QH2/3 IS 2950 rpm
20 4
NPSH 2950 rpm
10 2
TM065127
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 Q [m³/h]
80
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
P (PJE) P (PJE)
B2
G 1/2 G 1/2
4x 22.5
180
275 150
D3
45
45
332 425
485 499
G 1/2 G 1/2

PN 16 / DN 150
B1
PN 25 / DN 150 PN 40 / DN 150
8x 22 8x 26 8x 26
G 1/2
G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080550
275 150 150 150
55
55
55
332 425 425 425

485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 155-1-1 11 783 1265 318 204 350 - 234

CRN 155-1 15 783 1265 318 204 350 - 245
CRN 155-2-2 22 905 1457 318 204 350 - 284
CRN 155-2 30 907 1518 396 315 400 492 387
CRN 155-3-2 37 1029 1665 396 315 400 492 423
CRN 155-3 45 1052 1760 449 338 450 573 517
CRN 155-4-1 55 1173 1920 497 410 550 732 637
CRN 155-5-2 75 1295 2115 551 433 550 732 764
CRN 155-5 75 1295 2115 551 433 550 732 764
CRN 155-6 90 1417 2347 551 433 550 732 854
CRN 155-7 110 1569 2481 616 515 660 848 1058
CRN 155-8-2 110 1691 2603 616 515 660 848 1068
81
10 CR, CRI, CRN
CR 185
TM065116
82
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 200 PN 25 / DN 200 PN 40 / DN 200
B1
12 x 22 12 x 27 12 x 30
G 1/2 G 1/2
260
295
340
260
310
360
260
320
375
4 x 26.5 4 x 26.5 4 x 26.5
200
TM076604
350 200 200 200
50
50
50
415 510 510 510

615 599 599 599

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 185-1-1 18.5 854 1380 318 204 350 - 345

CR 185-1 22 854 1406 318 204 350 - 360
CR 185-2-2 37 986 1622 396 315 400 492 502
CR 185-2 45 1006 1714 449 338 450 573 596
CR 185-3-3 55 1140 1887 497 410 550 732 722
CR 185-3 75 1140 1960 551 433 550 732 836
CR 185-4-3 75 1268 2088 551 433 550 732 855
CR 185-4 90 1268 2198 551 433 550 732 935
CR 185-5-3 110 1420 2332 616 515 660 848 1135
CR 185-5 110 1420 2332 616 515 660 848 1135
CR 185-6-3 132 1548 2625 616 515 660 848 1283
CR 185-6 132 1548 2625 616 515 660 848 1283
CR 185-7-3 160 1676 2753 616 515 660 848 1398
CR 185-7 160 1676 2753 616 515 660 848 1398
CR 185-8-3 200 1804 3036 616 515 660 848 1583
CR 185-8 200 1804 3036 616 515 660 848 1583
83
10 CR, CRI, CRN
CRN 185
TM065128
84
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
P (PJE) P (PJE)
B2
G 1/2 G 1/2
4x 26.5
200
D3 350 200
50
50
415 510
615 599
G 1/2 G 1/2

PN 16 / DN 200 PN 25 / DN 200 PN 40 / DN 200
B1
12 x 22 12 x 27 12 x 30
G 1/2
G 1/2
260
295
340
260
310
360
260
320
375
4x 26.5 4 x 26.5 4 x 26.5
200
TM076605
350 200 200 200
50
50
50
415 510 510 510

615 599 599 599

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 185-1-1 18.5 854 1380 318 204 350 - 345

CRN 185-1 22 854 1406 318 204 350 - 360
CRN 185-2-2 37 986 1622 396 315 400 492 502
CRN 185-2 45 1006 1714 449 338 450 573 596
CRN 185-3-3 55 1140 1887 497 410 550 732 722
CRN 185-3 75 1140 1960 551 433 550 732 836
CRN 185-4-3 75 1268 2088 551 433 550 732 855
CRN 185-4 90 1268 2198 551 433 550 732 935
CRN 185-5-3 110 1420 2332 616 515 660 848 1135
CRN 185-5 110 1420 2332 616 515 660 848 1135
CRN 185-6-3 132 1548 2625 616 515 660 848 1283
CRN 185-6 132 1548 2625 616 515 660 848 1283
CRN 185-7-3 160 1676 2753 616 515 660 848 1398
CRN 185-7 160 1676 2753 616 515 660 848 1398
CRN 185-8-3 200 1804 3036 616 515 660 848 1583
CRN 185-8 200 1804 3036 616 515 660 848 1583
85
10 CR, CRI, CRN
CR 215
TM065117
86
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 150 PN 25 / DN 150 PN 40 / DN 150
B1
8x 22 8x 26 8x 26
G 1/2 G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080549
275 150 150 150
55
55
55
332 425 425 425
485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 215-1-1 22 854 1406 318 204 350 - 361

CR 215-1 37 858 1494 396 315 400 492 488
CR 215-2-2 45 1006 1714 449 338 450 573 597
CR 215-2-1 55 1012 1759 497 410 550 732 709
CR 215-2 75 1012 1832 551 433 550 732 823
CR 215-3-2 75 1140 1960 551 433 550 732 838
CR 215-3 90 1140 2070 551 433 550 732 918
CR 215-4-2 110 1292 2204 616 515 660 848 1124
CR 215-4 132 1292 2369 616 515 660 848 1254
CR 215-5-2 132 1420 2497 616 515 660 848 1269
CR 215-5 160 1420 2497 616 515 660 848 1369
CR 215-6-3 160 1548 2625 616 515 660 848 1388
CR 215-6 200 1548 2780 616 515 660 848 1558
CR 215-7-2 200 1676 2908 616 515 660 848 1573
87
10 CR, CRI, CRN
CRN 215
TM065129
88
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
P (PJE) P (PJE)
B2
G 1/2 G 1/2
4x 22.5
180
275 150
D3
45
45
332 425
485 499
G 1/2 G 1/2

PN 16 / DN 150
B1
PN 25 / DN 150 PN 40 / DN 150
8x 22 8x 26 8x 26
G 1/2
G 1/2
205
240
285
205
250
300
205
250
300
4x 22.5 4x 22.5 4x 22.5
180
TM080550
275 150 150 150
55
55
55
332 425 425 425

485 499 499 499

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 215-1-1 22 854 1406 318 204 350 - 361

CRN 215-1 37 858 1494 396 315 400 492 488
CRN 215-2-2 45 1006 1714 449 338 450 573 597
CRN 215-2-1 55 1012 1759 497 410 550 732 709
CRN 215-2 75 1012 1832 551 433 550 732 823
CRN 215-3-2 75 1140 1960 551 433 550 732 838
CRN 215-3 90 1140 2070 551 433 550 732 918
CRN 215-4-2 110 1292 2204 616 515 660 848 1124
CRN 215-4 132 1292 2369 616 515 660 848 1254
CRN 215-5-2 132 1420 2497 616 515 660 848 1269
CRN 215-5 160 1420 2497 616 515 660 848 1369
CRN 215-6-3 160 1548 2625 616 515 660 848 1388
CRN 215-6 200 1548 2780 616 515 660 848 1558
CRN 215-7-2 200 1676 2908 616 515 660 848 1573
89
10 CR, CRI, CRN
CR 255
p H
[MPa] [m]
3.0
300 CR 255
50 Hz
280
-6-2
260
2.5
240 -5
220
-5-3
2.0
200
-4
180
-4-2
160
1.5
-3
140
-3-2
120
1.0 100
-2
80 -2-2
60
0.5 -1
40
-1-1
20
0.0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
0 10 20 30 40 50 60 70 80 90 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
40 80
30 P21/1 IS 2950 rpm 60
20 P22/3 IS 2950 rpm 40
10 20
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
H NPSH
[m] [m]
60 12
QH1/1 IS 2950 rpm
40 8
QH2/3 IS 2950 rpm
20 NPSH 2950 rpm 4
TM065118
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
Preliminary performance curves.

The pump efficiency (ETA) is calculated and based on a three-stage pump.
90
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 200 PN 25 / DN 200 PN 40 / DN 200
B1
12 x 22 12 x 27 12 x 30
G 1/2 G 1/2
260
295
340
260
310
360
260
320
375
4 x 26.5 4 x 26.5 4 x 26.5
200
TM076604
350 200 200 200
50
50
50
415 510 510 510

615 599 599 599

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CR 255-1-1 30 858 1469 396 315 400 492 463

CR 255-1 45 878 1586 449 338 450 573 582
CR 255-2-2 55 1012 1759 497 410 550 732 709
CR 255-2 75 1012 1832 551 433 550 732 823
CR 255-3-2 90 1140 2070 551 433 550 732 918
CR 255-3 110 1164 2076 616 515 660 848 1108
CR 255-4-2 132 1292 2369 616 515 660 848 1254
CR 255-4 160 1292 2369 616 515 660 848 1354
CR 255-5-3 160 1420 2497 616 515 660 848 1372
CR 255-5 200 1420 2652 616 515 660 848 1542
CR 255-6-2 200 1548 2780 616 515 660 848 1558
91
10 CR, CRI, CRN
CRN 255
p H
[MPa] [m]
3.0
300 CRN 255
50 Hz
280
-6-2
260
2.5
240 -5
220
-5-3
2.0
200
-4
180
-4-2
160
1.5
-3
140
-3-2
120
1.0 100
-2
80 -2-2
60
0.5 -1
40
-1-1
20
0.0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
0 10 20 30 40 50 60 70 80 90 Q [l/s]
P2 Eta
[kW] Eta 2950 rpm [%]
40 80
30 P21/1 IS 2950 rpm 60
20 P22/3 IS 2950 rpm 40
10 20
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
H NPSH
[m] [m]
60 12
QH1/1 IS 2950 rpm
40 8
QH2/3 IS 2950 rpm
20 NPSH 2950 rpm 4
TM065130
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Q [m³/h]
Preliminary performance curves.

The pump efficiency (ETA) is calculated and based on a three-stage pump.
92
CR, CRI, CRN
10
Dimensional sketch

D2
D1 D4
B2
D3
G 1/2 G 1/2

PN 16 / DN 200 PN 25 / DN 200 PN 40 / DN 200
B1
12 x 22 12 x 27 12 x 30
G 1/2 G 1/2
260
295
340
260
310
360
260
320
375
4 x 26.5 4 x 26.5 4 x 26.5
200
TM076604
350 200 200 200
50
50
50
415 510 510 510

615 599 599 599

Pump type
[kW] B1 B1+B2 D1 D2 D3 D4 [kg]
CRN 255-1-1 30 858 1469 396 315 400 492 463

CRN 255-1 45 878 1586 449 338 450 573 582
CRN 255-2-2 55 1012 1759 497 410 550 732 709
CRN 255-2 75 1012 1832 551 433 550 732 823
CRN 255-3-2 90 1140 2070 551 433 550 732 918
CRN 255-3 110 1164 2076 616 515 660 848 1108
CRN 255-4-2 132 1292 2369 616 515 660 848 1254
CRN 255-4 160 1292 2369 616 515 660 848 1354
CRN 255-5-3 160 1420 2497 616 515 660 848 1372
CRN 255-5 200 1420 2652 616 515 660 848 1542
CRN 255-6-2 200 1548 2780 616 515 660 848 1558
93
11 CR, CRI, CRN
Electrical data
11. Electrical data
2-pole motors for CR, CRI, CRN, 50 Hz
MG
TM031711
Motor Frame Standard voltage Full-load current Power factor Efficiency Motor eff. Starting current Speed
P2 [kW] size [V] I1/1 [A] Cos φ1/1 class η [%] Istart [%] [rpm]
0.371) 71A 220-240Δ/380-415Y 1.74 / 1.00 0.80 - 0.70 IE3 73.8 490-530 2850-2880
0.551) 71B 220-240Δ/380-415Y 2.50 / 1.44 0.80 - 0.70 IE3 77.8 580-620 2830-2850
0.751) 80A 220-240Δ/380-415Y 3.30 / 1.90 0.81 - 0.71 IE3 80.7 580-620 2840-2870
1.11) 80C 220-240Δ/380-415Y 4.35 / 2.50 0.83 - 0.76 IE3 82.7 450-500 2840-2870
1.51) 90SD 220-240Δ/380-415Y 5.70 / 3.30 0.84 - 0.78 IE3 84.2 750-820 2890-2910
2.21) 90LE 380-415Δ 4.65 0.86 - 0.80 IE3 85.9 840-920 2890-2910
31) 100LC 380-415Δ 6.30 0.87 - 0.82 IE3 87.1 840-920 2900-2920
42) 112MC 380-415Δ 7.90 0.87 IE3 88.1 1000 2920-2940
5.52) 132SC 380-415Δ 11.00 0.87 - 0.82 IE3 89.2 1080-1180 2920-2940
7.52) 132SB 380-415Δ/660-690Y 14.4 - 14 / 8.3 - 8.1 0.88 - 0.82 IE3 90.1 780-910 2910-2920
112) 160MB 380-415Δ/660-690Y 20.8 - 19.8 / 12 - 11.8 0.88 - 0.84 IE3 91.2 660-780 2940-2950
152) 160MD 380-415Δ/660-690Y 28-26 / 16.2 - 15.6 0.89 - 0.87 IE3 91.9 660-780 2930-2950
18.52) 160LB 380-415Δ/660-690Y 34.5 - 32.5 / 20 - 18.8 0.89 - 0.85 IE3 92.4 830-980 2940-2950
222) 180MB 380-415Δ/660-690Y 39.5 / 22.8 0.90 IE3 92.7 830 2950
Siemens
TM031710
302) 200L 380-420Δ/660-725Y 53-51 / 31 - 29.5 0.87 IE3 93.3 700 2955
372) 200L 380-420Δ/660-725Y 65-63 / 37.5 - 36 0.88 IE3 93.7 710 2955
452) 225M 380-420Δ/660-725Y 78-74 / 45 - 43 0.89 IE3 94.0 690 2960
552) 250M 380-420Δ/660-725Y 95-90 / 55-52 0.89 IE3 94.3 670 2975
751) 280S 380-420Δ/660-725Y 128-125 / 74-72 0.89 IE3 94.7 680 2975
901) 280M 380-420Δ/660-725Y 152-147 / 88 - 85 0.90 IE3 95.0 720 2975
1101) 315S 380-420Δ/660-725Y 183-176 / 106-102 0.91 IE3 95.2 710 2982
1321) 315M 380-420Δ/660-725Y 220-210 / 127-121 0.91 IE3 95.4 720 2982
1601) 315L 380-420Δ/660-725Y 265-255 / 152-147 0.92 IE3 95.6 780 2982
2001) 315L 380-420Δ/660-725Y 330-310 / 190-179 0.92 IE3 95.8 720 2982
1) Deep-groove ball bearings.

2) Angular contact bearing mounted in drive end.
94
CR, CRI, CRN
12
List of pumped liquids

A number of typical liquids are listed below. Notes
Other pump versions may be applicable, but those stated D Often with additives.
in the list are considered to be the best choices. The density and/or viscosity differ from that/those of water. Take
The table is intended as a general guide only and cannot E this factor into account when calculating motor output and pump
performance.
replace actual testing of the pumped liquids and pump
materials under specific working conditions. F Pump selection depends on many factors. Contact Grundfos.
Therefore, use the list with some caution. Factors such as H Risk of crystallisation/precipitation in shaft seal.
those mentioned below may affect the chemical 1 Highly flammable liquid.
resistance of a specific pump version: 2 Combustible liquid.
• concentration of the pumped liquid 3 Insoluble in water.
• liquid temperature 4 Low self-ignition point.
• pressure.
Take safety precautions when pumping dangerous liquids.
Liquid concentration, liquid

Pumped liquid Chemical formula Note CR CRN
temperature
Acetic acid CH3COOH - 5 %, 20 °C - HQQE
Acetone CH3COCH3 1, F 100 %, 20 °C - HQQE
Alkaline degreasing agent D, F - HQQE -
Ammonium bicarbonate NH4HCO3 E 20 %, 30 °C - HQQE
Ammonium hydroxide NH4OH - 20 %, 40 °C HQQE -
Aviation fuel 1, 3, 4, F 100 %, 20 °C HQBV -
Benzoic acid C6H5COOH H 0.5 %, 20 °C - HQQV
- < 120 °C HQQE -
Boiler water
F 120-180 °C - -
Calcareous water - < 90 °C HQQE -
Calcium acetate (as coolant with inhibitor) Ca(CH3COO)2 D, E 30 %, 50 °C HQQE -
Calcium hydroxide Ca (OH)2 E Saturated solution, 50 °C HQQE -
Chloride-containing water F < 30 °C, maximum 500 ppm - HQQE
Chromic acid H2CrO4 H 1 %, 20 °C - HQQV
Citric acid HOC(CH2CO2H)2COOH H 5 %, 40 °C - HQQE
Completely desalinated water (demineralised
- 120 °C - HQQE
water)
Condensate - 120 °C HQQE -
Copper sulphate CuSO4 E 10 %, 50 °C - HQQE
Corn oil D, E, 3 100 %, 80 °C HQQV -
Diesel oil 2, 3, 4, F 100 %, 20 °C HQBV -
Domestic hot water (potable water) - < 120 °C HQQE -
Ethanol (ethyl alcohol) C2H5OH 1, F 100 %, 20 °C HQQE -
Ethylene glycol HOCH2CH2OH D, E 50 %, 50 °C HQQE -
Formic acid HCOOH - 5 %, 20 °C - HQQE
Glycerine (glycerol) OHCH2CH(OH)CH2OH D, E 50 %, 50 °C HQQE -
Hydraulic oil (mineral) E, 2, 3 100 %, 100 °C HQQV -
Hydraulic oil (synthetic) E, 2, 3 100 %, 100 °C HQQV -
Isopropyl alcohol CH3CHOHCH3 1, F 100 %, 20 °C HQQE -
Lactic acid CH3CH(OH)COOH E, H 10 %, 20 °C - HQQV
Linoleic acid C17H31COOH E, 3 100 %, 20 °C HQQV -
Methanol (methyl alcohol) CH3OH 1, F 100 %, 20 °C HQQE -
Motor oil E, 2, 3 100 %, 80 °C HQQV -
Naphthalene C10H8 E, H 100 %, 80 °C HQQV -
Nitric acid HNO3 F 1 %, 20 °C - HQQE
Oil-containing water - < 100 °C HQQV -
95
12 CR, CRI, CRN
Liquid concentration, liquid

List of pumped liquids
Pumped liquid Chemical formula Note CR CRN

temperature
Olive oil D, E, 3 100 %, 80 °C HQQV -
Oxalic acid (COOH)2 H 1 %, 20 °C - HQQE
Ozone-containing water (O3) - < 100 °C - HQQE
Peanut oil D, E, 3 100 %, 80 °C HQQV -
Petrol 1, 3, 4, F 100 %, 20 °C HQBV -
Phosphoric acid H3PO4 E 20 %, 20 °C - HQQE
Propanol C3H7OH 1, F 100 %, 20 °C HQQE -
Propylene glycol CH3CH(OH)CH2OH D, E 50 %, 90 °C HQQE -
Potassium carbonate K2CO3 E 20 %, 50 °C HQQE -
Potassium formate (as coolant with inhibitor) KOOCH D, E 30 %, 50 °C HQQE -
Potassium hydroxide KOH E 20 %, 50 °C - HQQE
Potassium permanganate KMnO4 - 5 %, 20 °C - HQQE
Rape seed oil D, E, 3 100 %, 80 °C HQQV -
Salicylic acid C6H4(OH)COOH H 0.1 %, 20 °C - HQQE
Silicone oil E, 3 100 % HQQV -
Sodium bicarbonate NaHCO3 E 10 %, 60 °C - HQQE
Sodium chloride (as coolant) NaCl D, E 30 %, < 5 °C, pH > 8 HQQE -
Sodium hydroxide NaOH E 20 %, 50 °C - HQQE
Sodium hypochlorite NaOCl F 0.1 %, 20 °C - HQQV
Sodium nitrate NaNO3 E 10 %, 60 °C - HQQE
Sodium phosphate Na3PO4 E, H 10 %, 60 °C - HQQE
Sodium sulphate Na2SO4 E, H 10 %, 60 °C - HQQE
Softened water - < 120 °C - HQQE
Soya oil D, E, 3 100 %, 80 °C HQQV -
Sulphuric acid H2SO4 F 1 %, 20 °C - HQQV
Sulphurous acid H2SO3 - 1 %, 20 °C - HQQE
Unsalted swimming-pool water - Approx. 2 ppm free chlorine (Cl2) HQQE -
96
CR, CRI, CRN
13
Accessories
13. Accessories
Pipe connection
Various sets of counterflanges and couplings are available for pipe connection.
Counterflanges for CR
A set consists of one counterflange, one gasket, bolts and nuts.
Product
Counterflange Pump type Description Rated pressure Pipe connection
number
Threaded 16 bar, EN 1092-2 Rp 1 409901
CR 1s
CR 1
TM050998
CR 3 For welding 25 bar, EN 1092-2 25 mm, nominal 409902

CR 5
16 bar 25 bar
Threaded 16 bar, EN 1092-2 Rp 1 1/4 419901
CR 1s
CR 1
TM051003
CR 3 For welding 25 bar, EN 1092-2 32 mm, nominal 419902

CR 5
16 bar 25 bar

For welding 25 bar, EN 1092-2 40 mm, nominal 429901
CR 10
TM051002
For welding 40 bar, special flange 50 mm, nominal 429903
16 bar 25/40 bar
97
13 CR, CRI, CRN
Product
Accessories

number
Threaded 16 bar, special flange Rp 2 1/2 339904
TM050999
CR 15
Threaded 16 bar, special flange Rp 2 1/2 * 96509578
CR 20
TM051005

TM051000

Threaded 16 bar, special flange Rp 3 349901
For welding 40 bar, DIN 2635 65 mm, nominal 349905
CR 32
16 bar 16 bar 16/40 bar 16 bar
Threaded 16 bar Rp 3 350540

For welding 16 bar 80 mm, nominal 350541
CR 45
TM050996
16 bar 16/40 bar

TM050995
CR 64
16 bar 16 bar 25 bar

18
CR 95
TM065157
150 150 For welding 25/40 bar, EN 1092-2 100 mm, nominal 99432755
16 bar 25/40 bar
98
CR, CRI, CRN
13
Accessories
Product
number
For welding 16 bar, EN 1563 150 mm, nominal 99432761
ø26 ø22
CR 125
ø205 ø205 CR 155 For welding 25/40 bar, EN 1563 150 mm, nominal 99432760
ø250 ø240
ø300 ø285
16 bar 25/40 bar
ø22 ø25 ø28

CR 185
CR 215
ø260 ø260 ø260
ø295 ø310 ø320 CR 255 For welding 40 bar, EN 1563 200 mm, nominal 97521269
ø340 ø360 ø375
* Flange with 20 mm higher collar. With this collar, the installation dimensions of a CR 20 will be identical to those of a CR 32. If a CR 32 is replaced by a
CR 20, the base must be raised by 15 mm.
99
13 CR, CRI, CRN
Counterflanges for CRN

Accessories
Counterflanges for CRN pumps are made of stainless steel EN 1.4401 (≈AISI 316).
A set consists of one counterflange, one gasket, bolts and nuts.
Product
number
CRN 1s
CRN 1
TM050998
CRN 3 For welding 25 bar, EN 1092-1 25 mm, nominal 405285
CRN 5
16 bar 25 bar
CRN 1s
CRN 1
TM051003
CRN 3 For welding 25 bar, EN 1092-1 32 mm, nominal 415305

CRN 5
16 bar 25 bar

TM051001

TM051006
CRN 10

TM051001

TM051006
100
CR, CRI, CRN
13
Accessories
Product
number
TM050999
Threaded 16 bar, special flange Rp 2 1/2 96509575
TM051005
CRN 15
ø19
CRN 20

TM030402
ø102
ø125
ø165
19.5
ø127

18.5
TM027203
ø102
ø125
ø165
Threaded 16 bar Rp 2 1/2 349910

Threaded 16 bar, special flange Rp 3 349911
TM050994
CRN 32
16 bar 16/40 bar 16/25 bar

CRN 45
TM050996
16 bar 16/40 bar

TM050995
CRN 64
101
13 CR, CRI, CRN
Product
Accessories

number
For welding 16 bar, EN 1.4408 100 mm, nominal 99432731
18
CRN 95
TM065157
150 150 For welding 25/40 bar, EN 1.4408 100 mm, nominal 99432732
16 bar 25/40 bar

ø26 ø22
CRN 125
ø205 ø205 CRN 155 For welding 25/40 bar, EN 1.4408 150 mm, nominal 99432734
ø250 ø240
ø300 ø285
16 bar 25/40 bar
ø22 ø25 ø28

CRN 185
CRN 215
ø260 ø260 ø260
ø295 ø310 ø320 CRN 255 For welding 40 bar, EN 1.4408 200 mm, nominal 99432737
ø340 ø360 ø375
102
CR, CRI, CRN
13
PJE couplings for CRN
Accessories
Materials in contact with the pumped liquid are made of
stainless steel EN 1.4401 (≈AISI 316) and rubber.
A set consists of two coupling halves (Victaulic type 77),
one gasket, one pipe stub (for welding or threaded), bolts
and nuts.
Number of
Maximum Pipe Rubber Product
Coupling Pump type Pipe stub A B coupling sets
pressure [bar] connection parts number
required
EPDM 2 419911
CRN 1s Threaded 69 50 320 R 1 1/4
CRN 1 FKM 2 419905
CRN 3 EPDM 2 419912
CRN 5 For welding 69 50 280 DN 32
FKM 2 419904
EPDM 2 339911
CRN 10 Threaded 69 80 377 R2
A FKM 2 339918
CRN 15
B EPDM 2 339910
FKM 2 339917
EPDM 2 98144746
FKM 2 98144749
CRN 45 EPDM 2 98144752

For welding 69 140 465 DN 100
CRN 64 FKM 2 98144755
EPDM 98144752
CRN 95 For welding 69 140 465 DN 100 2
FKM 98144755
103
13 CR, CRI, CRN
Accessories
FlexiClamp base connections

All sets comprise the necessary number of bolts and nuts as well as a gasket or O-ring.
Number of
Pipe Product
Base connection Pump type Connection PN A B Rubber parts coupling sets
connection number
required
Oval Rp 1 1 96449748
(cast iron) Rp 1 1/4 1 96449749
CRI Rp 1 2 96449746
CRN 16 50 210 Klingersil
1s, 1, 3, 5 Oval
A
(stainless steel) Rp 1 1/4 2 96449747
B
EPDM 2 96449743
CRI
CRN Union G2 25 50 228
FKM 2 96449744
1s, 1, 3, 5
A
B
EPDM 2 96449745
CRI
DIN DN 25
CRN 16 75 250
(stainless steel) DN 32 FKM 2 96449900
1s, 1, 3, 5
A
B
EPDM 2 405280
Rp 1
FKM 2 405281
EPDM 2 415296
Rp 1 1/4
Clamp, threaded FKM 2 415297
208
pipe stub EPDM 2 405291
CRI 1" NPT
FKM 2 405292
CRN 25 50
EPDM 2 415311
1s, 1, 3, 5 1 1/4" NPT
A
FKM 2 415312
B
EPDM 2 405282
28.5
Clamp, pipe stub FKM 2 405283
-
for welding EPDM 2 415300
37.2
FKM 2 415301
104
CR, CRI, CRN
13
Accessories
Number of
Pipe Product
connection number
required
Rp 1 1/4 2 96498775
Oval
Rp 1 1/2 2 96498727
(cast iron)
Rp 2 2 96498836
CRI 10
Rp 1 1/4 16 80 260 Klingersil 2 96498776
CRN 10
A Oval Rp 1 1/2 2 96498728
B (stainless steel)
Rp 2 2 96498835
EPDM 2 96500275
CRI 10
Union G 2 3/4 25 80 288
CRN 10 FKM 2 96500276
A
B
FGJ EPDM 2 96498840

(cast iron) FKM 2 96500119
DN 40
FGJ EPDM 2 96500263
CRI 10 (stainless steel) FKM 2 96500264

16 80 316
CRN 10 FGJ EPDM 2 96500265
A (cast iron) FKM 2 96500266
B DN 50
FGJ EPDM 2 96500267
(stainless steel) FKM 2 96500269
EPDM 2 425238
Rp 1 1/2
FKM 2 425239
259
Clamp, threaded EPDM 2 335241
Rp 2
pipe stub FKM 2 335242
CRI 10 EPDM 2 96508600

Rp 2 1/2 25 80 346
CRN 10 FKM 2 96508601
A
48.3 EPDM 2 425242
B
Clamp, pipe stub (DN 40) FKM 2 425243
-
60.3
(DN 50) FKM 2 335252
105
13 CR, CRI, CRN
Accessories
Number of
Pipe Product
connection number
required
Rp 1 1/4 2 96498775
Oval
Rp 1 1/2 2 96498727
(cast iron)
Rp 2 2 96498836
CRI 15, 20
Rp 1 1/4 10 90 260 Klingersil 2 96498776
CRN 15, 20
A Oval Rp 1 1/2 2 96498728
B (stainless steel)
Rp 2 2 96498835
EPDM 2 96500275
CRI 15, 20
Union G 2 3/4 25 90 288
CRN 15, 20 FKM 2 96500276
A
B
FGJ EPDM 2 96498840

(cast iron) FKM 2 96500119
DN 40
FGJ EPDM 2 96500263
CRI 15, 20 (stainless steel) FKM 2 96500264

10 90 334
CRN 15, 20 FGJ EPDM 2 96500265
A (cast iron) FKM 2 96500266
B DN 50
FGJ EPDM 2 96500267
(stainless steel) FKM 2 96500269
EPDM 2 425238
Rp 1 1/2
FKM 2 425239
259
Clamp, threaded EPDM 2 335241
Rp 2
pipe stub FKM 2 335242
CRI 15, 20 EPDM 2 96508600

Rp 2 1/2 25 90 346
CRN 15, 20 FKM 2 96508601
A
EPDM 2 425242
B 48.3 (DN 40)
Clamp, pipe stub FKM 2 425243
-
60.3 (DN 50)
FKM 2 335252
106
CR, CRI, CRN
13
LiqTec
Accessories
The LiqTec dry-running protection unit protects the pump
and process against dry running and temperatures
exceeding 130 ± 5 °C. Connected to the motor PTC
sensor, LiqTec also monitors the motor temperature.
LiqTec is prepared for DIN rail mounting in control
cabinets.
Enclosure class: IPX0.
Extension
Voltage Sensor Cable Product
LiqTec unit Pump type LiqTec cable
[V] 1/2" 5m number
15 m
200-240 ● ● ● - 96556429
80-130 ● ● ● - 96556430
- - - - ● 96443676
CR
CRI
CRN
TM032108
107
13 CR, CRI, CRN
Sensors
Accessories
Sensor Type Supplier Measuring range Product number
SITRANS FM MAGFLO 1-5 m3

ID8285
MAG 5100 W (DN 25)

ID8286
MAG 5100 W (DN 40)
Flowmeter Siemens
ID8287
MAG 5100 W (DN 65)

ID8288
MAG 5100 W (DN 100)
TTA (0) 25 0-25 °C 96432591
TTA (-25) 25 -25 to +25 °C 96430194
Temperature sensor
TTA (50) 100 50-100 °C 96432592
TTA (0) 150 0-150 °C 96430195
Protecting tube Carlo Gavazzi
96430201
∅9 x 50 mm
Accessory for temperature sensor.
Protecting tube
All with 1/2 RG connection 96430202
∅9 x 100 mm
Cutting ring bush 96430203
tmg
Temperature sensor, ambient temperature WR 52 -50 to +50 °C ID8295
(DK: Plesner)
ETSD 0-20 °C 96409362
Differential-temperature sensor Honsberg
ETSD 0-50 °C 96409363
Note: All sensors have 4-20 mA signal output.
Danfoss pressure sensor kits

Pressure
Content Liquid temperature Product number
[bar]
0-4 96428014
Danfoss pressure transmitter, type MBS 3000, with 2 m screened cable. 0-6 96428015
Connection: G 1/2 A (DIN 16288 - B6kt)
-40 to +85 °C 0-10 96428016
5 cable clips (black)
Instructions PT (400212) 0-16 96428017
0-25 96428018
DPI differential-pressure sensor kit

Pressure
Content Product number
[bar]
1 sensor incl. 0.9 m screened cable (7/16" connections) 0 - 0.6 96611522
1 original DPI bracket for wall mounting 0 - 1.0 96611523
1 Grundfos bracket for mounting on motor
0 - 1.6 96611524
2 M4 screws for mounting of sensor on bracket
1 M6 screw (self-cutting) for mounting on MGE 90/100 0 - 2.5 96611525
1 M8 screw (self-cutting) for mounting on MGE 112/132 0 - 4.0 96611526
3 capillary tubes (short/long) 0 - 6.0 96611527
2 fittings (1/4" - 7/16")
5 cable clips (black)
Installation and operating instructions (00480675) 0-10 96611550
Service kit instructions.
Adapter kit for sensor 1)

Content Type Product number
G 1/2 EPDM 99352712
Adapter for sensor
G 1/2 FKM 99352737
1) Applies to CRN 95.
108
CR, CRI, CRN
14
Variants
14. Variants
The variants are available on request. Pumps
Although the Grundfos CR, CRI, CRN product range Variant Description
offers a number of pumps for different applications, For safety or height reasons, certain applications,
customers require specific pump solutions to satisfy their for instance on ships, require the pump to be
Horizontally mounted in horizontal position.
needs. See the following documents: mounted pump
For easy installation, the pump is fitted with
• Grundfos CR "Custom-built pumps" data booklet brackets that support motor and pump.
• Grundfos "CR, CRN high pressure" data booklet. Low-temperature

Exposed to temperatures down to -40 °C, coolant
pumps may require neck rings with a different
pump
Below please find the range of options available for diameter in order to prevent impeller drag.
customising the CR pumps to meet the customers’ For high-pressure applications, we offer a unique
High-pressure
demands. pump up to 47 bar
double pump system capable of generating a
pressure of up to 47 bar.
Contact Grundfos for further information or for requests
other than the ones mentioned below. We recommend this for boiler-feed applications
Low-NPSH pump
where cavitation may occur due to poor inlet
(improved suction)
Motors conditions.
Variant Description The bearing flange is suitable for applications
where the inlet pressure is higher than the
For operation in hazardous atmospheres, maximum pressure recommended.
ATEX-approved Pump with bearing
explosion-proof or dust-ignition-proof motors may
motor flange The bearing flange increases the life of motor
be required.
bearings.
Motor with anti- For operation in humid environments motors with We recommend this for standard motors.
condensation built-in anti-condensation heating unit may be
heating unit required. Belt-driven pumps are designed to operate in
Belt-driven pump places with limited space or where no electrical
We offer motors with built-in bimetallic thermal power is available.
Motor with thermal
switches or temperature-controlled PTC sensors
protection Pump for
(thermistors) incorporated in the motor windings. CRN pumps are designed for applications
pharmaceutical and
Ambient temperatures above 40 °C or installation requiring the sterilisation and CIP capability of
biotechnological
at altitudes of more than 1000 metres above sea pipes, valves and pumps. (CIP = clean-in-place.)
Oversize motor applications
level require the use of an oversize motor (that is
derating).
Connections and other variants
4-pole motor We offer 4-pole standard motors.
Variant Description
Shaft seals In addition to the wide range of standard flange
connections, a 16-bar DIN standard clamping
Variant Description flange is available.
Pipe connections
We recommend shaft seals with FFKM or FXM O- Customised flanges are available according to
Shaft seal with
ring for applications where the pumped liquid may specifications.
FFKM O-ring
damage the standard O-ring material.
TriClamp connections are of a hygienic design
TriClamp
Seal with flush, We recommend this for applications involving with a sanitary coupling for use in the
connection
quench seal crystallising, hardening or sticky liquids. pharmaceutical and food industry.
We recommend this for applications involving To substantially reduce the risk of corrosion of the
extremely high temperatures. Electropolished materials, we offer electropolished pumps.
No conventional mechanical shaft seal can pump We recommend this for applications in the
withstand liquid temperatures of up to 180 °C for pharmaceutical and food industry.
any length of time.
Air-cooled shaft
For such applications, we recommend Grundfos’
seal system
unique air-cooled shaft seal system.
In order to ensure a low liquid temperature around
the standard shaft seal, the pump is fitted with a
special air-cooled shaft seal chamber.
No separate cooling is required.
We recommend this for applications involving
poisonous or explosive liquids.
It protects the surrounding environment and the
people working in the vicinity of the pump.
Double seal with It consists of two seals mounted in a "back-to-
pressure chamber back" arrangement inside a separate pressure
seal chamber. As the pressure in the chamber is
higher than the pump pressure, leakage is
prevented. A dosing pump or a special pressure
intensifier generates the seal chamber pressure.
Magnetically driven pumps for industrial
applications.
CR MAGdrive Key applications are industrial processes
involving the handling of aggressive,
environmental, dangerous or volatile liquids, such
as organic compounds and solvents.
109
15 CR, CRI, CRN
Grundfos Product Center
15. Grundfos Product Center

Online search and sizing tool to help you make the right choice.
From the international view, you can select your specific country to view the product range available to you.
International view: https://product-selection.grundfos.com
All the information you need in one place

Performance curves, technical specifications, pictures, dimensional drawings, motor curves, wiring
diagrams, spare parts, service kits, 3D drawings, documents, system parts. The Product Center
displays any recent and saved items - including complete projects - right on the main page.
Downloads
On the product pages, you can download installation and operating instructions, data booklets,
service instructions, etc., in PDF format.
When you select your country, you will see the menus below. Note that some menus may not be available depending on
the country.
Example: https://product-selection.grundfos.com/uk
Pos. Description
1 Products & services enables you to find products and documents by typing a product number or name into the search field.
2 Applications enables you to choose an application to see how Grundfos can help you design and optimise your system.
3 Products A-Z enables you to look through a list of all the Grundfos products.
4 Categories enables you to look for a product category.
5 Liquids enables you to find pumps designed for aggressive, flammable or other special liquids.
6 Product replacement enables you to find a suitable replacement.
7 WWW enables you to select the country, which changes the language, the available product range and the structure of the website.
8 Sizing enables you to size a product based on your application and operating conditions.
110
99301179
ECM: 1317950
07.2021
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and “be think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved. © 2021 Grundfos Holding A/S, all rights reserved.

CR Data Book

Uploaded by

Copyright:

Available Formats

CR Data Book

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CR Data Book

Uploaded by

Copyright:

Available Formats

GRUNDFOS DATA BOOKLET

CR, CRI, CRN

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CRI, CRN 20 . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6. Construction. . . . . . . . . . . . . . . . . . . . . . . . . 11 11. Electrical data. . . . . . . . . . . . . . . . . . . . . . . . 94

10. Performance curves and technical data. . . 30

Pumped liquids ErP compliant

CR, CRI, CRN pump size 1s 1 3 5 10 15 20

Features and benefits

5 3 x 220-240/380-415 V (P2: 0.37 - 1.5 kW)

3 x 380-420/660-725 V (P2: 30-200 kW)

Motor protection of MG and Siemens Ambient temperature

CR 1s, 1, 3, 5, 10, 15, 20

CRI 1s, 1, 3, 5, 10, 15, 20

1) Stainless steel available on request.

CRN 1s, 1, 3, 5, 10, 15, 20

1) Stainless steel available on request.

CRN 32, 45, 64

1) Stainless steel available on request.

CR 95, 125, 155, 185, 215, 255

CRN 95, 125, 155, 185, 215, 255

Maximum operating pressure and liquid temperature

Oval flange PJE, clamp, union, DIN

All pumps will be delivered with an HQQE/V cartridge p [bar]

The operating range of the shaft seal depends on 40

∅12, ∅16 and ∅22 shaft seals (0.37-55 kW) 75-200

Operating range of standard shaft seals for CR, CRI,

Maximum inlet pressure

If the maximum permissible operating pressure is 255-1-1 → 255-1 15

CR, CRI, CRN 10 The pressure measured at the pump

connections. 220 -11

the performance curve charts. 100 -5

Grundfos Product Center 0.4 40 -2

Product Center. Our easy-to-use virtual guide leads you 0 4 8 12 16 20 24 28 32 36 Q [m³/h]

through the selection of the pump for the application in 0 2 4 6 8 10 Q [l/s]

160 QH 2900 rpm 2/3

• Pressure loss as a result of height differences (Hgeo). 120

account for pressure loss in connection with long 0 4 8 12 16 20 24 28 32 36 Q [m³/h]

pipes, bends, valves or similar.

As the pump is sized on the basis of the highest possible

Hgeo NPSH / NPSHR 1

Servicing shaft seals

Thrust handling device Operating pressure and inlet pressure

Do not exceed the limit values for these pressures:

120b Vapour pressure in metres head. To be read from the

If the calculated "H" is negative, an inlet pressure of

Position numbers for THD parts

Pos. Description Material

* On request for CRN.

Minimum inlet pressure, NPSH

To avoid cavitation, do not select a pump with a duty point

How to read the curve charts

Guidelines to performance curves

Minimum flow rate

10. Performance curves and technical data

1200 120 -21

0.00 0.05 0.10 0.15 0.20 0.25 0.30 Q [l/s]

Performance curves and technical data

Dimensions and weights

1200 120 -21