Fullmax 5W-40: Maximum Protection With Synthetic Technology
Fullmax 5W-40: Maximum Protection With Synthetic Technology
Fullmax 5W-40: Maximum Protection With Synthetic Technology
APPLICATIONS
It is suitable to use in passenger vehicles or light commercial vehicles where viscosity and performance
level requirements are appropriate.
CHARACTERISTICS
Its superior thermal and oxidation stability maintains its performance during the long oil drain interval
recommended by the engine manufacturers.
Its high viscosity index provides high performance in variable weather conditions.
Its excellent fluidity during cold weather conditions provides quick lubrication of engine parts during the
first start up, so protects the engine against wear.
Its active cleaning feature keeps engine parts clean.
PERFORMANCES
ACEA A3/B4 , A3/B3
API SN/CF
MB-APPROVAL 229.3, 226.5
PORSCHE A40
RENAULT RN 0710/0700
VW 505 00/502 00
TYPICAL PROPERTIES
Density@15°C, g/ml ASTM D 4052 0,854
Viscosity@ 40°C, mm²/s ASTM D 445 84,85
Viscosity@100°C, mm²/s ASTM D 445 14,13
Viscosity Index ASTM D 2270 173
Flash Point, ºC ASTM D 92 222
Pour Point, ºC ASTM D 97 -39
TBN, mgKOH/g ASTM D 2896 9,8
1/2
OPET.TDS.0100/Rev.12/8.11.2018
HEALTH AND SAFETY RECOMMENDATIONS
Waste oils must not be discharged into underground or surface water sources, sewage systems or garbage
cans. Prolonged or repeated contact with used oils may cause skin diseases. Therefore sterilized gloves
should always be used. If part of the skin comes into contact with used oil, that part should be immediately
washed with plenty of soap and water. In case of skin irritation or redness caused by contact, seek advice
of your doctor immediately. For more information contact Material Safety Data Sheet (MSDS).
The vehicle and equipment manufacturers spesifications and relevant international standards were taken into consideration while
preparing the content of this Technical Data Sheet. The expressions in the content of this Technical Data Sheet can not be
considered as guarantee commitment or similar way in terms of product characteristics and product use in any applications.
The correct use of this product, compliance with applicable laws and regulations is responsibility of the user. Opet Fuchs Madeni
Yağ. San. ve Tic. A.Ş. can not be held responsible for any loss or damage arising from the abnormal use and misuse or any
hazards of product content and its results.
This Technical Data Sheet is valid from the date of publication. The information in the content of this Technical Data Sheet are
subject to change without notice. Please contact with Opet Fuchs Technical Services Department for more information.
2/2 OPET.TDS.0100/Rev.12/8.11.2018