Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Dynamic Ultra Plus: SAE 15W-40

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DYNAMIC ULTRA PLUS

SAE 15W-40

Product Description

DYNAMIC ULTRA PLUS is high performance heavy-duty diesel engine oil recommended for on
and off highway diesel engine equipped with diesel particulate filter (DPF) or selective catalytic
reduction (SCR) in Euro V specification and above. Synthesized with the cutting-edge EVOTEC
technology and Ultra Shield molecules to enhance engine cleanliness and prevent sludge
formation for all models of diesel engines. . It provides excellent engine wear protection, plus
delivers efficient engine performance and extra extended oil drain intervals.

Benefits

• Offers superior lubrication and engine wear protection as well as maintains the full power
and performance.
• Provides high detergency and dispersancy for increasing soot handling, more effective
prevention of deposit accumulation and ring sticking problem.
• Advanced detergent provide low-SAPS with superb TBN retention for all compatible
aftertreatment device.
• Gives adequate oil film thickness and prevents sludge formation on vital engine parts.
• Prolongs engine life and extended oil drain intervals and minimizes engine oil
consumption.

Applications

• Designed for superior performance of modern heavy-duty diesel engines meeting


emission standard Euro V or above with DPF or SCR including common rail system of
both on-highway and off-highway applications such as trucks, buses, trailers and heavy
equipment.
• Suitable for all models of diesel pick up trucks and commercial vehicles equipped with
EGR (Exhaust Gas Recirculation) or turbocharger.

For more information please contact:


Page 1/2
Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED
DYNAMIC ULTRA PLUS
Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858
REVISION 0 / 2021
E-mail : pttlubricants@pttor.com
DYNAMIC ULTRA PLUS
SAE 15W-40

Typical Characteristics

Tests Methods Units Results


15W-40
Density at 15 °C ASTM D 4052 g/cm3 0.8801
Kinematic Viscosity at 40 °C ASTM D 445 mm2/s 112.0
Kinematic Viscosity at 100 °C ASTM D 445 mm2/s 14.9
Viscosity Index ASTM D 2270 137
Cold-cranking Simulator ASTM D 5293 mPa.s 6342 @-20 °C
Total Base Number ASTM D 2896 mg KOH/g 9.0
Flash Point (COC) ASTM D 92 °C 242
Pour Point ASTM D 5950 °C -33
Sulfated Ash ASTM D 874 % wt 1.0

Performance Standards Health and Safety

• API CK-4/SN This product shows no significant


• ACEA E9, E7 health or safety hazard when used
• JASO DH-2 under the recommended applications
• MB 228.31 and suitable handling.
• VOLVO VDS-4.5,VDS-4
• MACK EO-S 4.5, EO-O PREMIUM PLUS
Avoid the direct contact. Wash imme-
• CUMMINS 20086/81
diately after contact. Health and safety
information is available on the Safety
• MAN M3775, M3575 Data Sheet (SDS) which can be obtained
• MTU TYPE 2.1 from http://pttlubricants.pttor.com
• RENAULT RLD-3
• CATERPILLAR ECF-3
• DETROIT DIESEL 93K218, 93K222
• Ford WSS-M2C171-F1

Professional Lubricant
Service Partner

Note: Data and information contained in this publication are based on standard test under laboratory conditions and/or performance test. To
consider the use of PTT Lubricants’ products in particular application, customer is responsible for determining whether product and
information are appropriate for customer conditions or should consult with PTT Lubricants’ technical service division. The procedure of
using any lubricant may differ or change depended on different machines and their manuals. Therefore, we recommend to read,
understand and review the latest SDS in order to ensure the use of product is accomplished safety.

For more information please contact:


Page 2/2
Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED
DYNAMIC ULTRA PLUS
Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858
REVISION 0 / 2021
E-mail : pttlubricants@pttor.com

You might also like