Titan GT1 Flex 5 0W 20
Titan GT1 Flex 5 0W 20
Titan GT1 Flex 5 0W 20
TITAN GT1 FLEX 5 SAE 0W-20 is a highly innovative • Universally applicable for diesel and gasoline en-
product in the range of engine oils with lowest viscosity. gines of many manufacturers
The unique formulation based on XTL-Technology in • Reduced fuel consumption (up to 3.6% compared to
conjunction with the further developed FUCHS additive conventional oils)
technology provides the high-performance engine oil • Less CO2 emissions
TITAN GT1 FLEX 5 SAE 0W-20. The unique ad- • Outstanding wear protection under all operating con-
vantages of XTL-Technology for highly stressed en- ditions
gines, downsized aggregates or engines with Start- • Protection against Low-Speed Pre-Ignition (LSPI)
Stop-Systems have been improved. Significant im- • Optimized engine cleanliness
provements in power output and fuel economy were re- • Improved ageing stability due to XTL-Technology
ceived by lowering the dynamic viscosity. also in high speed driving and high outside tempera-
tures
Application • Suitable for selected hybrid vehicles depending on
OEM requirements
Due to its conceptual design, TITAN GT1 FLEX 5 SAE
0W-20 can be used in a variety of modern vehicles. Es- Specifications
pecially in selected models from BMW, Mercedes-
Benz, Opel and VOLVO, but also for a large number of • ACEA C5
Asian and American manufacturers (API SP RC & • API SN PLUS RC
ILSAC GF-6A). • API SP RC
• ILSAC GF-6A
TITAN GT1 FLEX 5 SAE 0W-20 is miscible and com-
patible with conventional branded engine-oils. How- Approvals
ever, intermixtures with other engine oils should be
avoided in order to fully utilize the product’s benefits. • BMW LONGLIFE-17 FE+
Respectively a complete oil change is recommended • JAGUAR LAND ROVER STJLR.03.5006
when converting to TITAN GT1 FLEX 5 SAE 0W-20. • MB-APPROVAL 229.71
For information on product safety and proper disposal • MB-APPROVAL 229.72
please refer to the latest Material Safety Data Sheet. • OV 040 1547
FUCHS Recommendations
• CHRYSLER MS-12145
• FIAT 9.55535-GSX
• FORD WSS-M2C947-A
• FORD WSS-M2C947-B1
• FORD WSS-M2C962-A1
• ILSAC GF-5
• JAGUAR LAND ROVER STJLR.51.5122
• VOLVO VCC RBS0-2AE
TYPICAL CHARACTERISTICS
Density at 15 °C DIN 51757 0.844 g/ml
SAE grade SAE J300 0W-20
Kinematic Viscosity at 40°C DIN 51562-1 41.4 mm²/s
Kinematic Viscosity at 100°C DIN 51562-1 8.2 mm²/s
Viscosity Index DIN ISO 2909 177
HTHS CEC-L-36-90 ≥ 2.6 mPas
Pour point DIN ISO 3016 -54 °C
Sulphated ash ASTM D874 ≤ 0.8 % m/m
Product dyeing DIN 10964 none