RNC Internal System Parameter Timervalues

Class_MO Param_name Ericsson_Constant
ArpMap systemDefaultArpQosEo YES

CchFrameSynch tProcRncDl YES
CchFrameSynch tProcRbsDl YES
CellUpdate rrcTcuc YES
ChannelSwitching pendingTimeAfterTrigger YES
ChannelSwitching thpReportInterval YES
ChannelSwitching filteringCoefficient YES
ChannelSwitching repeatTimer YES
ChannelSwitching allowSwitchToCommon YES
ChannelSwitching inactivityTimerDch YES
Cpc ueDtxCycle1 YES
Cpc ueDtxCycle2 YES
Cpc macDtxCycle YES
Cpc ueDpcchBurst1Tti2 YES
Cpc inactivityThreshUeDtxCycle2Tti2 YES
Cpc inactivityThreshUeDtxCycle2Tti10 YES
Cpc ueDtxLongPreambleLength YES
Cpc macInactivityThresh YES
Cpc cqiDtxTimer YES
Cpc ueDrxCycle YES
Cpc inactivityThreshUeDrxCycle YES
Cpc inactivityThreshUeGrantMonTti2 YES
Cpc inactivityThreshUeGrantMonTti10 YES
Cpc ueDrxGrantMonitoring YES
Cpc ueDtxDrxOffsetTti2 YES
Cpc ueDtxDrxOffsetTti10 YES
Cpc enablingDelay YES
Cpc cpcProfileOverride YES
CpmTransGapPattSeq tGSN YES
CpmTransGapPattSeq tGL1 YES
CpmTransGapPattSeq tGL2 YES
CpmTransGapPattSeq tGPL1 YES
CpmTransGapPattSeq tGPL2 YES
CpmTransGapPattSeq tGPRC YES
CpmTransGapPattSeq tGD YES
CpmTransGapPattSeq downLinkFrameType YES
CpmTransGapPattSeq nIdentifyAbort YES
CpmTransGapPattSeq tReconfirmAbort YES
CpmTransGapPattSeq tgcfnOffset YES
DchFrameSynch tProcRncDl YES
DchFrameSynch tProcRbsDl YES
DchFrameSynch tProcRncUl YES
DchFrameSynch tProcRbsUl YES
Fach fach1RateMatchingAttrDl YES
Fach fach2RateMatchingAttrDl YES
Fach sccpchPunctureLimit YES
Fach tfcs YES
Fach fach1RateMatchingAttrDlTdd YES
Fach fach2RateMatchingAttrDlTdd YES
Handover maxBufferTime YES
Handover timeRelocprep YES
Handover timeRelocoverall YES
Handover timeRelocsup YES
Handover tCellChange YES
Handover initialCellListDelay YES
Handover comprModeRetryInterv YES
Handover maxSohoListSubset YES
Handover tsHoInIratHo YES
Handover tmStopIfMeas YES
Handover batonHoSupport YES
IubLink tpcPattern01CountDl YES
IurLink synchTimeout YES
IurLink synchRetransmissions YES
Mbms mbmsModificationPeriodCoeff YES
Mbms mbmsRepetitionPeriodCoeff YES
Mbms nonPlSessionsMax YES
Mbms plSessionsMax YES
Mbms neighbourCellsMax YES
Paging bcchModCycleLength YES
Pch pichMode YES
PositioningServiceClass positioningServiceClassInstId YES
PowerControl betaPrachControlTf0 YES
PowerControl betaPrachControlTf1 YES
PowerControl betaPrachDataTf0 YES
PowerControl betaPrachDataTf1 YES
PowerControl reportPeriodicity YES
PowerControl hysteresisSiUpdate YES
PowerControl maxAdjustmentStep YES
PowerControl adjustmentPeriod YES
PowerControl adjustmentRatio YES
PowerControl codePowerPeriod YES
PowerControl ulSirGuard YES
PowerControl sirErrorReportHyst YES
PowerControl sirEstFilter YES
PowerControl sirIncreaseMask YES
PowerControl blerCorrectionFactor YES
PowerControl transmittedCodePowerFilter YES
PowerControl rtwpFilter YES
PowerControl deltaSir1 YES
PowerControl deltaSirAfter1 YES
PowerControl deltaSir2 YES
PowerControl deltaSirAfter2 YES
PowerControl itp YES
PowerControl rpp YES
PowerControl sirErrorMode YES
PowerControl cCM YES
PowerControl gainFactorCLow YES
PowerControl gainFactorDLow YES
PowerControl gainFactorCHigh YES
PowerControl gainFactorDHigh YES
PowerControl gainFactorCExtraHigh YES
PowerControl gainFactorDExtraHigh YES
PowerControl sirIncreaseMaskTti2 YES
PowerControl initDlTransPowerDefault YES
PowerControl prxDpchDesDefault YES
PowerControl tpcStepSize YES
PowerControl pwrEstFact1 YES
RabHandling eulMinHwSchRate YES
Rach preambleThreshold YES
RncFunction gpehStorageSize YES
RncFunction recordingStorageSize YES
RncFunction loadSharingThreshold YES
RncFunction hsCellChangeCfnOffset YES
RncFunction hsMacdSwitchTimeOffset YES
RncFunction eulBufferEmptyTimeThreshold YES
RncFunction edchTciIntervalMin YES
RncFunction hsIubDrtExtensionInterval YES
RncFunction hsMissingCaSupervisionTime YES
RncFunction hsMissingCaReduction YES
RncFunction edchSoftCongThreshold YES
RncFunction maxBlockedPreambSignatures YES
RncFunction preambleThresholdIncrRachCov YES
RncSystemParameters tRrcChSwitch1 YES
RncSystemParameters tRrcChSwitch3 YES
RncSystemParameters tNbapRnsapChSwitch4 YES
RncSystemParameters tRrcEst1 YES
RncSystemParameters tRrcRel1 YES
RncSystemParameters tRrcRel2 YES
RncSystemParameters tNbapRlSetupIub YES
RncSystemParameters tRnsapRlSetupIur YES
RncSystemParameters tNbapSynchRlReConfig2 YES
RncSystemParameters tRnsapSynchRlReConfig1 YES
RncSystemParameters tRrcRABEst YES
RncSystemParameters tRrcRABRel YES
RncSystemParameters tRrcActiveSetUpdate YES
RncSystemParameters tNbapRlAdd YES
RncSystemParameters tRnsapRlAdd YES
RncSystemParameters hsWaitMeasRepT YES
RncSystemParameters ueRcVersion YES
Rrc t300 YES
Rrc t302 YES
Rrc t308 YES
Rrc t317 YES
Rrc n300 YES
Rrc n302 YES
Rrc n308 YES
Rrc t309 YES
Rrc n313 YES
Rrc n315 YES
Rrc t307 YES
Rrc t316 YES
Rrc t313 YES
Rrc cfnOffsetSrbDchDl YES
Rrc cfnOffsetSrbHs YES
SduFormat sduSize YES
SduFormat formatContext YES
SecurityHandling cipheringGuardTime YES
Sid cnInformation YES
Subflow subflowNumber YES
Subflow sduDelivery YES
Subflow sduErrRatioMan YES
Subflow sduErrRatioExp YES
Subflow resBitErrRatioMan YES
Subflow resBitErrRatioExp YES
UeMeasControl asCellSyncInfoRepInd YES
UeMeasControl dsCellSyncInfoRepInd YES
UeMeasControl msCellSyncInfoRepInd YES
UeMeasControl triggerCondTwo1a YES
UeMeasControl amountOfReporting1a YES
UeMeasControl maxNumberRepCells1a YES
UeMeasControl triggerCondOne1b YES
UeMeasControl amountOfReporting1c YES
UeMeasControl maxNumberRepCells1c YES
UeMeasControl readSfnInd YES
UeMeasControl gsmTimeDiffRepInd YES
UeMeasControl maxNumberRepCells1d YES
UeMeasControl maxNumberRepCells3a YES
UeMeasControl measQuant6 YES
UeMeasControl cellSyncInfoRepInd4_2b YES
UeMeasControl ueAutoUpdateMode4_2b YES
UeMeasControl maxNumbRepCells4_2b YES
UeMeasControl utranThresh3aForcedGsm YES
UeMeasControl rachSfnSfnTimeDiffRepInd YES
UeMeasControl utranThresh3aForcedGsmTdd YES
UeRabType trafficClass YES
UeRabType assymetryInd YES
UeRabType maxBitRateDl YES
UeRabType maxBitRateUl YES
UeRabType maxSduSize YES
UeRabType transferDelay YES
UeRabType trafficHandlingPriority YES
UeRabType sourceStatisticsDescriptor YES
UeRabType ingressBitRateAverage YES
UeRabType ingressBitRatePeak YES
UeRabType egressBitRateAverage YES
UeRabType egressBitRatePeak YES
UeRabType ingressSscsSduSizeAverage YES
UeRabType ingressSscsSduSizePeak YES
UeRabType egressSscsSduSizeAverage YES
UeRabType egressSscsSduSizePeak YES
UeRabType iucInitTimer YES
UeRabType noIucInitRep YES
UeRabType rabType YES
UeRabType guaranteedBitRateDl YES
UeRabType guaranteedBitRateUl YES
UeRc startCfnOffset YES
UeRc stopCfnOffset YES
UeRc gsmHoAllowed YES
UeRc rcState YES
UeRc ifhoAllowed YES
UeRc resService YES
UeRc preferredCpmMethUl YES
UeRc preferredCpmMethDl YES
UeRc connectionCapability YES
UeRc ganHoAllowed YES
UeRc resServiceTdd YES
UeRc mmtel YES
UeRc referenceTFC YES
UeRcEdchFlow macdPowerOffset YES
UeRcEdchFlow harqTransmUlTarget YES
UeRcEdchFlow transmissionGrantType YES
UeRcEdchFlow t1eTimerUl YES
UeRcEdchFlow rbType YES
UeRcEdchGainFactors edpdchGainFactorUl YES
UeRcEdchGainFactors referenceEtfci YES
UeRcEdchGainFactors tfInd YES
UeRcHsdsch macHsWindowSize YES
UeRcHsdsch discardTimer YES
UeRcHsdsch timerT1 YES
UeRcHsdsch macHsReorderingBufferSize YES
UeRcHsdsch rbType YES
UeRcHsdsch priorityQueueId YES
UeRcHsdsch schedulingPriorityIndicator YES
UeRcHsdsch dpchTdm2Dl YES
UeRcHsdsch dpchTdm4Dl YES
UeRcPhyChDl spreadingFactor YES
UeRcPhyChDl dpchSlotFormat YES
UeRcPhyChDl tfciPresenceIndicator YES
UeRcPhyChDl noTfc YES
UeRcPhyChDl fixFlexPosition YES
UeRcPhyChDl noPilotBits YES
UeRcPhyChDl secondInterleaveMode YES
UeRcPhyChDl ccTrChId YES
UeRcPhyChDl modulation YES
UeRcPhyChDl noChCodesPerTimeSlot YES
UeRcPhyChDl noTimeSlots YES
UeRcPhyChDl otherTimeSlotFormat YES
UeRcPhyChDl punctureLimit YES
UeRcPhyChDl repetitionLength YES
UeRcPhyChDl repetitionPeriod YES
UeRcPhyChDl dpchOffsetValue YES
UeRcPhyChDl tfciCoding YES
UeRcPhyChDl tstdIndicator YES
UeRcPhyChEdch edpcchGainFactorUl YES
UeRcPhyChEdch edchMinimumSetEtfci YES
UeRcPhyChEdch puncturingLimitUl YES
UeRcPhyChEdch tti YES
UeRcPhyChEdch etfciTableIndex YES
UeRcPhyChEdch eulTtiBudgetSrb YES
UeRcPhyChEdch eulTtiBudgetNonSchSip YES
UeRcPhyChEdch eulTtiBudgetScheduledFlows YES
UeRcPhyChEdch eulMuxOption YES
UeRcPhyChEdch edpdchGainFactorMinReduced YES
UeRcPhyChTfc ctfc YES
UeRcPhyChTfc rcTfi YES
UeRcPhyChTfc tfcId YES
UeRcPhyChTfc ulDlSelector YES
UeRcPhyChUl spreadingFactor YES
UeRcPhyChUl dpcchSlotFormat YES
UeRcPhyChUl tfciPresenceIndicator YES
UeRcPhyChUl noTfc YES
UeRcPhyChUl punctureLimit YES
UeRcPhyChUl secondInterleaveMode YES
UeRcPhyChUl ccTrChId YES
UeRcPhyChUl dpchSlotFormat YES
UeRcPhyChUl modulation YES
UeRcPhyChUl noChCodesPerTimeSlot YES
UeRcPhyChUl noTimeSlots YES
UeRcPhyChUl otherTimeSlotFormat YES
UeRcPhyChUl repetitionLength YES
UeRcPhyChUl repetitionPeriod YES
UeRcPhyChUl specialBurstScheduling YES
UeRcPhyChUl dpchOffsetValue YES
UeRcPhyChUl tfciCoding YES
UeRcPhyChUl ulSynchStepFreq YES
UeRcPhyChUl ulSynchStepSize YES
UeRcRab rbType YES
UeRcRab egressBitRateAverage YES
UeRcRab egressBitRatePeak YES
UeRcRab egressSscsSduSizeAverage YES
UeRcRab egressSscsSduSizePeak YES
UeRcRab ingressBitRateAverage YES
UeRcRab ingressBitRatePeak YES
UeRcRab ingressSscsSduSizeAverage YES
UeRcRab ingressSscsSduSizePeak YES
UeRcRb rbType YES
UeRcRb rlcLogChType YES
UeRcRb rlcMode YES
UeRcRb rncTimerPoll YES
UeRcRb rncTimerStatusProhibit YES
UeRcRb rncLastPduInTransmPoll YES
UeRcRb rncLastPduInReTransmPoll YES
UeRcRb rncMissingPduIndicator YES
UeRcRb rncTransmissionWindowSize YES
UeRcRb rncReceivingWindowSize YES
UeRcRb rncInSequenceDelivery YES
UeRcRb rncMaxDat YES
UeRcRb rncMaxRst YES
UeRcRb rncTimerRst YES
UeRcRb rncTimerPollProhibit YES
UeRcRb rncPollSdu YES
UeRcRb rncPollWindow YES
UeRcRb rncPollPdu YES
UeRcRb ueSduDiscardMode YES
UeRcRb ueMaxDat YES
UeRcRb ueTransmissionWindowSize YES
UeRcRb ueTimerRst YES
UeRcRb ueMaxRst YES
UeRcRb ueTimerPollProhibit YES
UeRcRb ueTimerPoll YES
UeRcRb ueLastTxPduPoll YES
UeRcRb ueLastReTxPduPoll YES
UeRcRb ueInSequenceDelivery YES
UeRcRb ueReceivingWindowSize YES
UeRcRb ueTimerStatusProhibit YES
UeRcRb ueMissingPduIndicator YES
UeRcRb uePollSdu YES
UeRcRb uePollPdu YES
UeRcRb uePollWindow YES
UeRcRb trChId YES
UeRcRb logChMux YES
UeRcRb trChTypeDl YES
UeRcRb trChTypeUl YES
UeRcRb rbUser YES
UeRcRb logChId YES
UeRcRb logChPriority YES
UeRcRb rbId YES
UeRcRb rlcUserType YES
UeRcRbRlc maxMacdPduSizeExtended YES
UeRcRbRlc rncMaxDat YES
UeRcRbRlc rncMaxRst YES
UeRcRbRlc rncPollWindow YES
UeRcRbRlc rncReceivingWindowSize YES
UeRcRbRlc rncTimerPoll YES
UeRcRbRlc rncTimerRst YES
UeRcRbRlc rncTimerStatusProhibit YES
UeRcRbRlc rncTransmissionWindowSize YES
UeRcRbRlc ueMaxDat YES
UeRcRbRlc ueMaxRst YES
UeRcRbRlc uePollWindow YES
UeRcRbRlc ueReceivingWindowSize YES
UeRcRbRlc ueTimerPoll YES
UeRcRbRlc ueTimerRst YES
UeRcRbRlc ueTimerStatusProhibit YES
UeRcRbRlc ueTransmissionWindowSize YES
UeRcRrc ingressBitRateAverage YES
UeRcRrc ingressBitRatePeak YES
UeRcRrc egressBitRateAverage YES
UeRcRrc egressBitRatePeak YES
UeRcRrc ingressSscsSduSizeAverage YES
UeRcRrc ingressSscsSduSizePeak YES
UeRcRrc egressSscsSduSizeAverage YES
UeRcRrc egressSscsSduSizePeak YES
UeRcRrc trChType YES
UeRcTrCh trChId YES
UeRcTrCh rbType YES
UeRcTrCh dchFpId YES
UeRcTrCh frameHandlingPriority YES
UeRcTrCh payloadCrcPresenceIndicator YES
UeRcTrCh ulFpMode YES
UeRcTrCh noTfDl YES
UeRcTrCh sizeOfTbTf0Dl YES
UeRcTrCh noOfTbTf0Dl YES
UeRcTrCh ttiDl YES
UeRcTrCh chCodingTypeDl YES
UeRcTrCh chCodingRateDl YES
UeRcTrCh crcSizeDl YES
UeRcTrCh noTfUl YES
UeRcTrCh sizeOfTbTf0Ul YES
UeRcTrCh noOfTbTf0Ul YES
UeRcTrCh ttiUl YES
UeRcTrCh chCodingTypeUl YES
UeRcTrCh chCodingRateUl YES
UeRcTrCh crcSizeUl YES
UeRcTrCh maxTfSubset YES
UeRcTrCh dlQeSelector YES
UeRcTrCh cmcBitsPerSlot YES
UeRcTrCh dchCombIndicator YES
UtranCell pwrCongFilter YES
UtranCell txInterval YES
UtranCell txFilter YES
UtranCell fPwrUp YES
UtranCell fPwrDown YES
UtranCell tfsFlexConstant YES
UtranCell intCongFilter YES
UtranCell congDlInterval YES
UtranCell congTimeOut YES
UtranCell pwrEstFact YES
Default_v Parameter_
Range alue Description
System default ARP values used when the ARP mapping feature is not activated throug
1 to 30 1 Buffering/processing time in the RNC for a FACH/PCH data frame on the downlink. Par
1 to 30 5 Buffering/processing time in the RBS for a FACH/PCH data frame on the downlink. Par
0 to 80 10 Timer for supervision of the response to CELL UPDATE CONFIRM.This attribute may on
0 to 6 1 Time after a channel switch is requested, after which the next measurement report ma
1 to 20 5 Averaging period of the UL and/or DL throughput measurement.This attribute may onl
0 to 9 11 13 17 19 6 Filtering coefficient of the code power measurements.This attribute may only be chang
0 to 40 4 Time between repeated requests to downswitch a downlink radio bearer on DCH with
0 to 1 1 Controls whether it is allowed to switch the radio connection from a dedicated transpo
0 to 1000 30 Time after which an IU RELEASE REQUEST message is sent to the core network, for UEs
1 4 5 8 10 16 20 20 Number of subframes in the uplink DPCCH pattern in DTX cycle 1.This attribute may on
4 5 8 10 16 20 32 40 6 20 Number of subframes in the uplink DPCCH pattern in DTX cycle 2.This attribute may on
1 4 5 8 10 16 20 5 Length of the MAC DTX cycle.This attribute may only be changed by Ericsson personne
125 2 Number of subframes in the uplink DPCCH burst in DTX cycle 1 for EUL 2ms TTI.This att
125 2 Number of subframes in the uplink DPCCH burst in DTX cycle 2 for EUL 2ms TTI.This att
125 5 Number of subframes in the uplink DPCCH burst in DTX cycle 1 for EUL 10ms TTI.This a
125 5 Number of subframes in the uplink DPCCH burst in DTX cycle 2 for EUL 10ms TTI.This a
1 4 8 16 32 64 128 256 1 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE
1 4 8 16 32 64 128 256 1 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE
2 4 15 4 Number of slots in the long preamble associated with DTX cycle 2 Note, when this para
0 1 2 4 8 16 32 64 128 2 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE
-1 0 1 2 4 8 16 32 64 1 2 Number of subframes after an HS-DSCH reception during which the CQI reports have h
4 5 8 10 16 20 5 Length of the HS-SCCH reception pattern in subframes.This attribute may only be chan
0 1 2 4 8 16 32 64 128 2 Number of subframes after an HS-SCCH reception or after the first slot of an HS-PDSCH
0 1 2 4 8 16 32 64 128 16 Number of TTIs after an E-DCH transmission during which the UE shall monitor the E-A
0 1 2 4 8 16 32 64 128 4 Number of TTIs after an E-DCH transmission during which the UE shall monitor the E-A
0 Determines whether the UE is required to monitor the E-AGCH and the E-RGCH when
0 to 159 2 Offset of the DTX and DRX cycles compared to the CFN for E-DCH 2ms TTI.This attribut
0 to 159 0 Offset of the DTX and DRX cycles compared to the CFN for E-DCH 10ms TTI.This attribu
0 1 2 4 8 16 32 64 128 128 Number of radio frames during which the UE shall send DPCCH continuously after (re)c
OFF Parameter to determine whether the pre-defined hardcoded parameter set(profile) is
0 to 14 4 Transmission gap starting slot number. A transmission gap pattern begins in a radio fra
3 to 5 7 10 14 7 Transmission gap length 1. Number of slots in the first transmission gap within the tran
3 to 5 7 10 14 7 Transmission gap length 2. Number of slots in the second transmission gap within the
3 4 8 12 15 23 24 35 Transmission gap pattern length 1. Number of frames in transmission gap pattern 1.Th
3 4 8 12 15 23 24 35 Transmission gap pattern length 2. Numer of frames in transmission gap pattern 2.This
0 to 511 0 Transmission gap pattern repetition count. Number of transmission gap patterns withi
15 to 269 0 0 Transmission gap start distance. Number of slots between the starting slots of two con
0 to 1 0 Frame structure type used in downlink compressed mode control. This attribute may o
1 to 128 66 Maximum number of pattern repeats that the UE shall use to attempt to decode the u
1 to 20 11 Maximum time allowed for the re-confirmation of the BSIC of a GSM cell in the BSIC re
0 to 255 Offset to the transmission gap connection frame number, for the pattern sequence wh
1 to 30 Buffering/processing time for a downlink DCH data frame in RNC.This attribute may on
1 to 30 Buffering/processing time for a downlink DCH data frame in RBS.This attribute may on
1 to 30 Buffering/processing time for an uplink DCH data frame in RNC.This attribute may only
1 to 30 Buffering/processing time for an uplink DCH data frame in RBS.This attribute may only
1 to 256 220 Rate matching attribute in downlink for Fach1.The Fach1 is used for logical channels BC
1 to 256 130 Rate matching attribute in downlink for Fach2.The Fach2 is used for logical channel DT
0 to 15 5 Maximum amount of puncturing for common channels.Value mapping:0: 40 %1: 4
Configuration of elements used to build the Transport Format Combination Set (TFCS)
1 to 256 200 Rate matching attribute in the downlink for the first FACH. The first FACH is used for lo
1 to 256 110 Rate matching attribute in the downlink for the second FACH. The second FACH is used
0 to 50 10 Maximum time in buffer for a buffered report. This attribute may only be changed by E
1 to 120 10 Maximum time for resource allocation in the target system. This attribute may only be
1 to 30 5 Maximum time to complete a handover.This attribute may only be changed by Ericsso
1 to 60 15 Maximum time for relocation in the target RNC. This attribute may only be changed by
1 to 30 20 Time for supervising the "move" from UTRAN to GSM.Once the cell change order from
0 to 60 0 When the connection is set up for the first time, Measurement handler function will w
0 to 50 5 Time interval between trials to initiate compressed mode. This attribute may only be c
1 to 32 32 Maximum number of intra-frequency cells that the UE shall measure on. This attribute
1 to 10 2 Maximum time during which soft or softer handover may be triggered during IRAT-HO
0 to 60 20 Time for Supervision for measurements started due to Inter-frequency Load based han
0 Controls whether Baton Handover is supported for Intra-RNC Hard Handover.This attri
0 to 30 8 Downlink TPC pattern transmitted for the first RLS, until uplink initial synchronization is
1 to 10 2 DL/UL Synchronization control frame timeout value.This attribute may only be changed
1 to 10 2 Number of re-transmissions when sending a DL/UL Synchronization control frame.This
7 to 10 9 Represents m, the modification period coefficient. The actual modification period (MP
0 to 3 2 Represents r, the repetition period coefficient. The number of repetitions per modifica
0 to 20 20 Maximum number of simultaneous ongoing MBMS sessions in one non-PL cell. The MC
0 to 10 10 Maximum number of simultaneous ongoing MBMS sessions in one PL cell. The MCCH F
0 to 32 20 Maximum number of intra-frequency neighboring cells for which information is sent o
6 to 9 9 BCCH modification cycle length coefficient (k). The cycle length is calculated as the k'th
18 36 72 144 18 Number of paging indications per frame in the PICH.This attribute may only be change
ID of the service class.This attribute may only be changed by Ericsson personnel. Filter:
0 to 15 11 Beta value (gainFactor) for RACH control part, TFC 0.This attribute may only be change
0 to 15 10 Beta value (gainFactor) for RACH control part, TFC 1.This attribute may only be change
0 to 15 15 Beta value (gainFactor) for RACH data part, TFC 0.This attribute may only be changed b
0 to 15 15 Beta value (gainFactor) for RACH data part, TFC 1.This attribute may only be changed b
1 to 6000 1000 Report periodicity (RTWP period) for RBS common measurements.This attribute may o
30 to 60 30 If the difference between reported power measurement and the power value transmitt
1 to 10 1 Maximum adjustment step for downlink power balancing.This parameter is signaled ov
1 to 256 8 Adjustment period for downlink power balancing.This attribute may only be changed b
0 to 100 0 Adjustment ratio for downlink power balancing.This attribute may only be changed by
1 to 6000 200 Measurement period for downlink power balancing.This attribute may only be change
0 to 20 2 Defines the range used when determine when a SIR error measurement report shall be
10 to 6000 60 Defines the hysteresis used to determine when a SIR error measurement report shall b
0 to 9 11 13 15 17 19 0 Measurement filtering coefficient used to determine when a SIR error measurement re
0 to 10 4 Time that subsequent "SIR target up" commands are ignored after a successful "SIR tar
1 to 10 8 The jump algorithm typically gives a result that is slightly biased towards increased BLE
0 to 9 11 13 15 17 19 4 Measurement Filter Coefficient for Transmitted Code Power measurement used for do
0 to 9 11 13 15 17 19 9 Filter coefficient for received total wideband power measurement. This attribute may
0 to 30 10 Delta in UL SIR target value during the frame containing the start of the first transmissi
0 to 30 5 Delta in UL SIR target value during the frame after the frame containing the start of the
0 to 30 10 Delta in UL SIR target value during the frame containing the start of the second transm
0 to 30 5 Delta in UL SIR target value during the frame after the frame containing the start of the
0 to 1 0 Mode of transmission power of the uplink DPCCH at the first slot after transmission ga
0 to 1 1 Mode of step size during recovery period. This attribute may only be changed by Ericss
0 to 3 2 Used to determine which SIR error measurements shall be initiated.This attribute may
0 to 20 4 Used to adjust the reference power for users in compressed mode during DL power ba
0 to 15 11 Reference gain factor (generic beta value) for the uplink DPCCH part of RABs (or SRB) w
0 to 15 15 Reference gain factor (generic beta value) for the uplink DPDCH part of RABs (or SRB) w
0 to 10 4 Time that subsequent "SIR target up" commands are ignored after a successful "SIR tar
-350 to 150 -50 Default initial downlink transmission power, used when the PCCPCH RSCP or downlink
-120 to -58 -90 Default initial desired received uplink DPCH power value, used when the uplink time sl
1 to 3 1 Step size for power adjustment.This attribute may only be changed by Ericsson person
0 to 100 100 First decay factor for the downlink power estimation decay used by Admission Control
0 to 100 80 Second decay factor for the downlink power estimation decay used by Admission Cont
0 to 100 80 Third decay factor for the downlink power estimation decay used by Admission Contro
0 to 6016 32 The pre-allocated hardware rate for scheduled data for E-DCH users in the RBS. Neede
0 to 72 34 The threshold for preamble detection, relative to the interference level. This attribute
0 to 100000 100000 Total GPEH storage size available on the O&M MP and each Module MP.When gp
0 to 60000 60000 Total size of the storage space available for PM Recording ROP files on the O&M M
0 to 100 20 Threshold below which RRC redirections for inter-frequency load sharing will be inhibit
0 to 255 50 Offset in number of frames calculated from the activation time at serving HS-DSCH Cel
0 to 100 5 Used when calculating the time for the switch-over of the HS MAC-D flow from Source
2 10 20 50 100 200 50 50 The UE shall send an unhappy bit if it takes the UE more than this time to empty its bu
0 to 1000 250 Defines the minimum interval between two consecutive TNL CONGESTION INDICATION
50 to 200 0 100 Minimum time interval between two HS-DSCH Data Frames with a DRT Extension. The
10 to 150 0 33 Time without a received CAPACITY ALLOCATION (CA) control frame, for this PQF, that r
1 to 100 50 Defines the degree of bit rate reduction due to missing CAPACITY ALLOCATION control
1 to 100 66 Starting point for the soft congestion detection. This point is the shortest dynamic dela
2 to 4 4 Maximum number of preamble signatures that can be blocked in a cell.This attribute m
-360 to 0 -190 Indicates the preamble threshold to be used when the feature Increased RACH Covera
1 to 30 15 Started at transmission of RRC: RADIO BEARER RECONFIGURATION. Stopped at recepti
1 to 30 5 Started at transmission of RRC: TRANSPORT CHANNEL RECONFIGURATION or RADIO B
1 to 30 4 Started at transmission of DEDICATED MEASUREMENT INITIATION REQUEST. Stopped
1 to 30 3 Started at transmission of RRC CONNECTION SETUP to UE. Stopped at reception of RR
1 to 30 1 Started at transmission of RRC CONNECTION RELEASE to UE in state CELL_DCH. Stoppe
1 to 30 1 Started at transmission of RRC CONNECTION RELEASE to UE in state CELL_FACH. Stopp
1 to 30 3 Timer used to supervise the NBAP Radio Link Setup procedure. Started at transmission
1 to 30 4 Timer used to supervise the RNSAP Radio Link Setup procedure. Started at transmissio
1 to 30 3 Waiting time for RADIO LINK RECONFIGURATION READY (Iub).Unit: sThis attribute may
1 to 30 4 Waiting time for RADIO LINK RECONFIGURATION READY (Iur).Unit: sThis attribute may
1 to 30 5 Waiting time for RRC RESPONSE.Unit: sThis attribute may only be changed by Ericsson
1 to 30 6 Started at transmission of RRC: RADIO BEARER RELEASE or RADIO BEARER RECONFIGU
1 to 30 5 Timer used to supervise the RRC Active Set Update procedure. Started at transmission
1 to 30 3 Timer used to supervise the NBAP Radio Link Addition procedure. Started at transmiss
1 to 30 4 Timer used to supervise the RNSAP Radio Link Addition procedure. Started at transmis
0 to 5000 750 Maximum waiting time for a Measurement Report from the UE.Unit: msResolution: 25
0 to 128 Provides the possibility to record script version run on the node. The value is not used
0 to 14 10 Time for supervision of RRC Connection Setup.Used by the UE.This attribute may only
0 to 14 5 Maximum time between UE transmission of Cell Update message and UE reception of
40 80 160 320 40 Started at UE transmission of the RRC Connection Release Complete message. Set in SI
0 10 30 60 180 600 12 180 Maximum time for moving from CELL_FACH to idle mode if "out of service area". Used
0 to 7 5 Maximum number of retransmissions of RRC Connection Request.Used by the UE.This
0 to 7 6 Maximum number of retransmissions of Cell Update.Used by the UE.This attribute ma
1 to 8 1 Maximum number of retransmissions of the RRC connection release complete messag
1 to 8 6 UE timer that is controlled by UTRAN and sent to the UE in system information. This att
1 2 4 10 20 50 100 200 100 Number of frames to be considered for out-of-sync detection (UE in DCH).This attribut
1 50 100 200 400 600 1 Number of frames to be considered for in-sync detection (UE in DCH)This attribute ma
5 10 15 20 30 40 50 30 Waiting time before moving to idle (UE in PCH or FACH)This attribute may only be chan
0 10 20 30 40 50 30 Waiting time before starting T317 (UE in PCH)This attribute may only be changed by Er
0 to 15 3 Waiting time before "RL Failure" (UE in DCH).This attribute may only be changed by Eri
0 to 255 18 The TTI Alignment (UL and 2*DL) and UE Processing delay in number of radio frames a
0 to 255 8 TTI alignment and UE Processing delay in number of radio frames added to the activati
Subflow size (TB size).This attribute may only be changed by Ericsson personnel. Unit:
Applicable when more than one SDU Format exists per subflow and more than one sub
5 to 200 80 Guard time for start of ciphering in RLC-TM.This attribute may only be changed by Eric
0 to 2 System Information should be distributed about these CNs. This attribute may only be
1 to 3 Identifies which subflow this MO instance relates to. This attribute may only be change
0 to 2 Indicates if erroneous SDUs shall be delivered or not.This attribute may only be change
1 to 9 Mantissa part of SDU Error Ratio.This attribute may only be changed by Ericsson perso
1 to 6 Exponent part of SDU Error Ratio.This attribute may only be changed by Ericsson perso
1 to 9 Mantissa part of Residual Bit Error Ratio.This attribute may only be changed by Ericsso
1 to 8 Exponent part of Residual Bit Error Ratio.This attribute may only be changed by Ericsso
0 to 1 1 Indicates if cell synchronization information shall be reported for cells in the active set
0 to 1 1 Cell synch information report indicator. Indicates if cell synchronization information sh
0 to 1 1 Indicates if cell synchronization information shall be reported for the cells in the monit
245 5 Indicates which set of the cells shall be used in event 1a reporting evaluation. This attr
0 to 7 7 Number of reports when UE has reverted to event-triggered periodical reporting due t
1 to 6 3 Maximum number of cells included in the report for event 1a. This attribute may only
1 1 Specify the set of cells that shall be used in event 1b reporting evaluation. This attribut
0 to 7 7 Maximum number of periodic reports at event-triggered periodic reporting for event 1
1 to 6 3 Maximum number of cells included in the report for event 1c. This attribute may only b
0 to 1 1 Indicates if reading of SFN is required for the target cell. This attribute may only be cha
0 to 1 0 Indicates whether GSM observed time difference shall be reported for GSM cells. This
1 to 6 1 Maximum number of cells included in the report for event 1d. This attribute may only
1 to 12 4 Maximum number of cells included in the report for event 3a.This attribute may only b
UE_TRANS Measurement quantity for UL connection quality reporting evaluation, for event 6a an
0 Indicates if cell synchronization information shall be reported for cells in the Virtual Ac
ON_WITH_Indicates if UE autonomous update of the Virtual Active Set(s) shall be done or not, for
1 to 6 2 Maximum number of cells per reported non-used frequency included in the report for
-24 to 0 0 UTRAN threshold for event 3a for Service/Load Based GSM Handover measurements u
0 to 2 0 SFN-SFN observed time difference reporting indicator.This attribute may only be chang
-115 to -25 -25 UTRAN threshold for event 3a for Service Based GSM Handover measurements using m
Traffic class for the RAB type. Defines the type of an application for which the RAB is o
RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. V
Maximum bit rate in downlink direction.Use of value is based on the RAB asymmetry in
Maximum bit rate in uplink direction.Use of value is based on the RAB asymmetry indi
Maximum SDU size.This attribute may only be changed by Ericsson personnel. Unit: bit
Transfer delay. Indicates maximum delay for 95th percentile of the distribution of deli
Traffic handling priority.This attribute may only be changed by Ericsson personnel.
Specifies the characteristics of the source of submitted SDUs.This attribute may only b
Ingress bit rate average. Traffic descriptor parameter for the connection between the
Ingress bit rate peak. Traffic descriptor parameter for the connection between the RN
Egress bit rate average. Traffic descriptor parameter for the connection between the R
Egress bit rate peak. Traffic descriptor parameter for the connection between the RNC
Ingress SsCs SDU Size Average. Traffic Descriptor parameter for the connection betwe
Ingress SsCs SDU Size Peak. Traffic Descriptor parameter for the connection between t
Egress SsCs SDU Size Average. Traffic Descriptor parameter for the connection betwee
Egress SsCs SDU Size Peak. Traffic Descriptor parameter for the connection between t
Time to wait for CN response to an Iu-c initialization procedure. After this length of tim
Number of repeated attempts to initialize the Iu user plane protocol, when it has failed
Identifies what kind of radio access bearer this MO instance represents.This attribute m
Guaranteed bit rate in downlink direction.Use of value is based on RAB Asymmetry Ind
Guaranteed bit rate in uplink direction.Use of value is based on RAB Asymmetry Indica
Deprecated: This attribute is currently not used by the system. Changing it has no effec
Used to determine the value to which IE CM Configuration Change CFN (RNSAP and NB
Enables/disables the possibility of HO from UMTS to GSM per RAB type.This attribute m
State of the radio connection.This attribute may only be changed by Ericsson personne
Enables/disables the possibility of IFHO per RAB state.This attribute may only be chang
This parameter specifies the RES service which the UeRc belongs to.This attribute may
Preferred compressed mode method for the uplink.This attribute may only be changed
Preferred compressed mode method for the downlink.This attribute may only be chan
Indicates which capabilities are supported by a specific UeRc. This attribute may only b
Enables/disables handover from UMTS to GAN. Dependencies: Not used if the license
RES service to which this UeRc belongs.This attribute may only be changed by Ericsson
Indicates if this RAB combination is an MMTEL RAB or not.This attribute may only be c
The reference TFC is the TFC from the TFCS of the configuration represented by the Ue
0 to 6 E-DCH MAC-d power offset used by the Outer loop power control function.This attribu
0 to 15 Targeted number of HARQ transmissions in the uplink.It is recommended that the valu
Indicates whether scheduled or non-scheduled grant info applies for the EUL MAC-d fl
10 20 30 40 50 60 70 80 90 100 1 Time that the re-ordering entity should wait for an outstanding MAC-es PDU.It is recom
Identifies what kind of radio bearer this MO instance represents.This attribute may on
Reference gain factor for the UL E-DPDCH reference transport format 1.This attribute m
Reference E-TFCI for signaled E-DPDCH gain factors.This attribute may only be changed
Transport format indicator.This attribute may only be changed by Ericsson personnel.
MAC-hs/MAC-ehs window size used in the RBS and the UE for MAC-hs/MAC-ehs data t
Time to live for a MAC-hs SDU starting from the instant of its arrival into an HSDPA Prio
Time to live for MAC-hs SDU. The Re-ordering release timer T1 controls the stall avoida
MAC-hs reordering buffer size.This attribute may only be changed by Ericsson personn
Identifies what kind of radio bearer this MO instance represents. Special values:Only th
Priority Queue ID.This attribute may only be changed by Ericsson personnel. Filter: TDD
Scheduling priority of a priority queue.0 - Lowest Priority?5 - Highest PriorityThis attrib
Configures DPCH multiplexing in the downlink for two HSDPA users. This attribute may
Configures DPCH multiplexing in the downlink for four HSDPA users. This attribute may
Spreading factor.This attribute may only be changed by Ericsson personnel. $FDD{"Val
Indicates which message part format the DPCH shall use.This attribute may only be cha
TFCI presence indicator. This has the same meaning as the RRC parameter "TFCI existe
Current number of TFCs.This attribute may only be changed by Ericsson personnel.
Fixed or flexible position for TrCH on DPCH.This attribute may only be changed by Eric
Number of pilot bits for DPCH.The number of pilot bits needs to be signaled to the UE
Second interleaving mode.This attribute may only be changed by Ericsson personnel.V
CCTrCH ID for dedicated and shared channels. Identifies unambiguously a downlink CC
Modulation mode.This attribute may only be changed by Ericsson personnel.Value ma
Number of channelisation codes per time slot. This attribute may only be changed by E
Number of time slots. This attribute may only be changed by Ericsson personnel. Filter
Time slot format for all physical channels except the first (meaning the physical channe
Maximum amount of puncturing used for DCH in downlink rate matching.This attribute
Repetition length.This attribute may only be changed by Ericsson personnel.Specificati
Repetition period.This attribute may only be changed by Ericsson personnel.Value map
Number of radio frames to be used as the offset for the DPCH. Used for determining th
Determines the number of bits for the TFCI bits code word.Value mapping:0: v41: v82:
TSTD indicator. TSTD can be used to overcome the time varying characteristics of the c
0 to 8 Gain factor for the UL E-DPCCH.This attribute may only be changed by Ericsson person
0 to 127 E-DCH minimum set E-TFCI.This attribute may only be changed by Ericsson personnel.
44 to 100 Puncturing limit when increasing the number of used channelization codes. Only applie
2 10 TTI for E-DCH.This attribute may only be changed by Ericsson personnel. Unit: ms
01 E-TFCI table index.This attribute may only be changed by Ericsson personnel. Specifica
0 to 100 Deprecated: This attribute is currently not used by the system. Changing it has no effe
Deprecated: This attribute is currently not used by the system. Changing it has no effe
-1 8 11 15 21 30 42 60 84 Minimum reduced E-DPDCH gain factor. When E-DCH is configured, if the total UE tran
Alternative way to represent TFCThis attribute may only be changed by Ericsson perso
Array of TFI data for this UeRcPhyChTfc for all used TrChs of this Radio Connection.This
Transport format combination id.This attribute may only be changed by Ericsson perso
Indicates whether this instance is used for uplink or downlink.0: UL1: DLThis attribute m
Spreading factor.This attribute may only be changed by Ericsson personnel. $FDD{"Val
Indicates which message part format the DPCH shall use for DPCCH.This attribute may
TFCI presence indicator.DPCH info.This attribute may only be changed by Ericsson pers
Current number of TFCs.This attribute may only be changed by Ericsson personnel.
The maximum amount of puncturing for DCH in uplink rate matching.This attribute ma
Second interleaving mode.This attribute may only be changed by Ericsson personnel.V
CCTrCH ID for dedicated and shared channels. Identifies unambiguously an uplink CCTr
Controls which message part format the DPCH shall use as the time slot format for the
Modulation mode.This attribute may only be changed by Ericsson personnel.Value ma
Number of channelisation codes per time slot. This attribute may only be changed by E
Number of time slots. This attribute may only be changed by Ericsson personnel.Filter:
Time slot format for all physical channels except the first (meaning the physical channe
Repetition length.This attribute may only be changed by Ericsson personnel.Specificati
Repetition period.This attribute may only be changed by Ericsson personnel.Value map
Number of radio frames between special burst transmissions during DTX.This attribute
Number of radio frames to be used as the offset for the DPCH. Used for determining th
Determines the number of bits for the TFCI bits code word.Value mapping: 0: v41: v82
Number of subframes between two adjustments of the uplink transmission timing.This
Step size to be used for adjustment of the uplink transmission timing.This attribute ma
Identifies what kind of radio bearer this MO instance represents.Value RB_RRC is not a
Egress Bit Rate Average Traffic Descriptor parameter for the AAL2 connection between
Egress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the
Egress SsCs SDU Size Average. Traffic Descriptor parameter for the AAL2 connection b
Egress SsCs SDU Size Peak. Traffic Descriptor parameter for the AAL2 connection betw
Ingress Bit Rate AverageTraffic Descriptor parameter for the AAL2 connection between
Ingress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between th
Ingress SsCs SDU Size Average. Traffic Descriptor parameter for the AAL2 connection
Ingress SsCs SDU Size Peak. Traffic Descriptor parameter for the AAL2 connection betw
RLC Logical Channel Type.RLC info common to RNC side and UE sideThis attribute may
RLC transport mode.RLC info common to RNC side and UE side.It is assumed that the s
Timer poll, started when poll is transmitted. New poll is sent when timer expires and n
Minimum time between STATUS reports.RLC info on RNC side. Valid only for RLC mode
Indicates if poll at last PDU in transmission buffer is used or not.RLC info on RNC side. V
Indicates if poll at last PDU in retransmission buffer is used or not.RLC info on RNC side
Indicates if RNC should send a STATUS report for each detected PDU missing.RLC info o
Maximum number of RLC PDUs sent without getting them acknowledged. RLC info on
Maximum number of RLC PDUs in the receiving buffer. RLC info on RNC side. Valid only
Indicates if in-sequence delivery shall be used or not.RLC info on RNC side. Valid only f
Determines the number of transmissions of a PDU before a SDU is discarded or reset p
Determines the maximum number of transmissions of a reset PDU.The maximum num
Timer used for retransmission of reset PDU. This attribute may only be changed by Eric
Minimum time between polls. Used in RNC. This attribute may only be changed by Eric
Number of SDUs, interval between polling.This attribute may only be changed by Erics
Percentage of transmission windows, threshold for polling.This attribute may only be c
Number of PDUs, interval between pollings.This attribute may only be changed by Eric
Transmission SDU discard mode.RLC info on UE side UL. This attribute may only be cha
Timer used for retransmission of reset PDU.RLC info on UE side UL. This attribute may
The maximum number of transmissions of reset PDU equals MaxRst-1.RLC info on UE s
Minimum time between polls.RLC polling info on UE side UL. Valid only for RLC mode
Last PDU in transmission poll.RLC polling info on UE side UL. This attribute may only be
Last PDU in retransmission poll.RLC polling info on UE side UL. This attribute may only
Indicates whether in-sequence delivery shall be used.It is assumed that the same value
Maximum number of RLC PDUs in the receiving buffer. RLC info on UE side DL. Valid on
Minimum time between STATUS reports.RLC info on UE side DL. Valid only for RLC mod
Indicates if UE should send a STATUS report for each detected PDU missing. This value
Number of SDUs, interval between pollings.This attribute may only be changed by Eric
Number of SDUs, interval between polling.This attribute may only be changed by Erics
Transport Channel Identity (DCH Id) which gives the association between RB and Trans
Logical Channel Multiplexing indicator in MacD.RB Mapping Info. This attribute may on
Transport Channel Type DL.RB Mapping Info.This attribute may only be changed by Eri
Transport Channel Type UL.RB Mapping Info. Valid for RLC mode = UM, AM and TM.Th
Identifies the user of this radio bearer.This attribute may only be changed by Ericsson p
Logical Channel Identity.Used when several RBs are muxed to single DCH (1 is used for
Logical Channel PriorityUsed when several RBs are muxed to single DCH (1 is used for h
Radio Bearer Identity.1: SRB12: SRB23: SRB34: SRB45-32:used by other types
RLC User Type, used to inform the RLC about which interface to use.RLC info is commo
Maximum Flexible RLC PDU size.This attribute may only be changed by Ericsson person
Determines the maximum number of transmissions of a reset PDU.The maximum num
Maximum number of RLC PDUs in the receiving buffer. RLC info on RNC side. Valid only
Timer used for retransmission of reset PDU. This attribute may only be changed by Eric
Minimum time between STATUS reports.RLC info on RNC side. Valid only for RLC mode
The maximum number of transmissions of reset PDU equals MaxRst-1.This attribute m
Maximum number of RLC PDUs in the receiving buffer. RLC info on UE side DL. Valid on
Timer used for retransmission of reset PDU.RLC info on UE side UL. This attribute may
Minimum time between STATUS reports.RLC info on UE side DL. Valid only for RLC mod
Ingress Bit Rate Average Traffic Descriptor parameter for the AAL2 connection betwee
Ingress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between th
Egress Bit Rate AverageTraffic Descriptor parameter for the AAL2 connection between
Egress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the
Ingress SsCs SDU Size Average in octets.Traffic Descriptor parameter for the AAL2 con
Ingress SsCs SDU Size Peak in octets.Traffic Descriptor parameter for the AAL2 connec
Egress SsCs SDU Size Average in octets.Traffic Descriptor parameter for the AAL2 conn
Egress SsCs SDU Size Peak in octets.Traffic Descriptor parameter for the AAL2 connecti
Transport channel type.This attribute may only be changed by Ericsson personnel. Filte
Transport Channel Identity.This attribute may only be changed by Ericsson personnel.
DCH Frame Protocol Identity. This is the group that a DCH belongs to. In case of coordi
Frame Handling Priority.Frame Handling parameter.This attribute may only be changed
Payload Cyclic Redundancy Check (CRC) usage indicator (to SP and NBAP/RRC).Frame H
UL Format Protocol (NBAP).Frame Handling parameter.This attribute may only be chan
Current number of TFs defined in downlink.This attribute may only be changed by Eric
Transport block size for this TF in downlink.This attribute may only be changed by Erics
Number of transport blocks for this TF in downlink.This attribute may only be changed
Transmission time interval in downlink.This attribute may only be changed by Ericsson
Channel coding type in downlink.This attribute may only be changed by Ericsson perso
Channel coding rate in downlink.This attribute may only be changed by Ericsson person
CRC size in downlink.This attribute may only be changed by Ericsson personnel. Value m
Current number of TFs defined in uplink.This attribute may only be changed by Ericsso
Transport block size for this TF in uplink.This attribute may only be changed by Ericsson
Number of transport blocks for this TF in uplink.This attribute may only be changed by
Transmission Time Interval in uplink.This attribute may only be changed by Ericsson pe
Channel coding type in uplink.This attribute may only be changed by Ericsson personne
Channel coding rate in uplink.This attribute may only be changed by Ericsson personne
CRC size in uplink.This attribute may only be changed by Ericsson personnel. Value ma
$FDD{"Array of the maximum Transport Formats (TFIs) allowed for this TrCH.The first e
Controls whether quality evaluation is used for the downlink transport channel.Value m
Used by MAC-D in connection with higher layer scheduling when calculating data amo
DCH Combination Indicator.Frame Handling parameter.This attribute may only be chan
0 to 9 11 13 15 17 19 1 Power congestion filter.Used by Congestion Control.This attribute may only be change
100 to 60000 1000 Defines the periodicity of the DL cell carrier power measurement reporting.Used by Ce
0 to 9 11 13 15 17 19 5 Defines the RBS internal filtering.Used by CellLoad Monitor Initialization in Admission C
0 to 100 20 Attack factor for filtering the measured/estimated power consumption.Used by Cell Lo
0 to 100 10 Decay factor for filtering the measured/estimated power consumption.Used by Cell Lo
0 to 100 10 Factor to take the flexibility of the TFS for a DCH into account when calculating the ASE
0 to 9 11 13 15 17 19 1 RTWP measurement filter coefficient.This attribute may only be changed by Ericsson p
1 to 1000 100 Reporting interval for transmitted carrier power measurements between reports A and
0 to 20000 3000 Robustness timer for end of congestion detection.Used by Congestion Control.This att
0 to 100 30 Scaling factor for the estimation of the DL power consumption per RL. Unit: 0.01Chang
eature is not activated through its RncFeature MO instance.This attribute may only be changed by Ericsson personnel. Dependencies:T
a frame on the downlink. Part of the Downlink Offset (DO). Should be set to the upper limit of the delay within the RNC in the transmi
frame on the downlink. Part of the Downlink Offset (DO). Should be set to the upper limit of the delay within the RBS in the transmis
NFIRM.This attribute may only be changed by Ericsson personnel.Unit: 0.1 s
next measurement report may be sent from either the UE or RNC internal buffer load measurements. Used to limit the UE and RNC bu
ement.This attribute may only be changed by Ericsson personnel. Unit: 0.1 sChange takes effect: New connections
s attribute may only be changed by Ericsson personnel. Change takes effect: New connections
nk radio bearer on DCH with bad coverage to a lower DCH rate.This attribute may only be changed by Ericsson personnel. Special value
tion from a dedicated transport channel to a common transport channel (RACH/FACH) during channel switching in case of radio bearer
to the core network, for UEs that only use one or two signaling connections and no RABs in state CELL_DCH.This attribute may only be
cycle 1.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
cycle 2.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
hanged by Ericsson personnel.Change takes effect: New connectionFilter: FDD
cle 1 for EUL 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
smission, after which the UE shall immediately move from DTX cycle 1 to DTX cycle 2, for EUL 2ms TTI .This attribute may only be chan
smission, after which the UE shall immediately move from DTX cycle 1 to DTX cycle 2, for EUL 10ms TTI.This attribute may only be chan
cycle 2 Note, when this parameter is set to 2, RNC excludes the IE "UE DTX long preamble length" from the RRC message containing t
smission, after which the UE E-DCH transmissions are restricted to the MAC DTX pattern. The UE E-DCH transmissions are never restric
which the CQI reports have higher priority than the DTX pattern The CQI reports always have higher priority than the DTX pattern whe
s attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
the first slot of an HS-PDSCH reception during which the UE shall monitor the HS-SCCHs in the UE's HS-SCCH set continuously.This attr
the UE shall monitor the E-AGCH transmissions from the serving E-DCH cell and the E-RGCH from cells in the serving E-DCH radio link s
the UE shall monitor the E-AGCH transmissions from the serving E-DCH cell and the E-RGCH from cells in the serving E-DCH radio link s
AGCH and the E-RGCH when the subframe (2msTTI) or frame (10ms TTI) overlaps with the start of the DRX reception pattern.This attrib
E-DCH 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
E-DCH 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
PCCH continuously after (re)configuration with CPC activated.This attribute may only be changed by Ericsson personnel.Change takes e
ded parameter set(profile) is used or not to configure the CPC connections. If it is set to "OFF", the CPC connections are configured with
p pattern begins in a radio frame, containing at least one transmission gap slot. TGSN is the slot number of the first transmission gap slo
nsmission gap within the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Value mapping:Possible
transmission gap within the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Dependencies:If this
ransmission gap pattern 1.This attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM
nsmission gap pattern 2.This attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM
nsmission gap patterns within the transmission gap pattern sequence. This attribute may only be changed by Ericsson personnel. Speci
the starting slots of two consecutive transmission gaps within a transmission gap pattern. If this parameter is not set by higher layers,
control. This attribute may only be changed by Ericsson personnel. Value mapping:0 = 'A'1 = 'B' Change takes effect: Next configuratio
e to attempt to decode the unknown BSIC of a GSM cell in the initial BSIC identification procedure.This attribute may only be changed b
C of a GSM cell in the BSIC re-confirmation procedure.This attribute may only be changed by Ericsson personnel. Value mapping:1: 0.5
for the pattern sequence when starting CPM.TGCFN = running CFN + startCFNoffset + TGCFNoffsetThis attribute may only be changed
in RNC.This attribute may only be changed by Ericsson personnel. Unit: ms
in RBS.This attribute may only be changed by Ericsson personnel. Unit: ms
RNC.This attribute may only be changed by Ericsson personnel. Dependencies:It is recommended to set tProcRncUl + toAWEUl + toAE
RBS.This attribute may only be changed by Ericsson personnel. Unit: ms
s used for logical channels BCCH, CCCH and DCCH, control signaling.This attribute may only be changed by Ericsson personnel. Disturb
s used for logical channel DTCH, traffic signaling.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this
alue mapping:0: 40 %1: 44 %2: 48 %...15: 100 %This attribute may only be changed by Ericsson personnel.Dependencies:Before
mat Combination Set (TFCS) for PCH, FACH1 and FACH2.This attribute may only be changed by Ericsson personnel.Disturbances:Chang
. The first FACH is used for logical channels BCCH, CCCH and DCCH, for control signaling.This attribute may only be changed by Ericsson
CH. The second FACH is used for logical channel DTCH, for traffic signaling.This attribute may only be changed by Ericsson personnel. D
te may only be changed by Ericsson personnel. Value mapping:0: 0 s1: 0.2 s2: 0.4 s3: 0.6 s4: 0.8 s5: 1.0 s...50: 10 sUnit: 0.2 sChange ta
m. This attribute may only be changed by Ericsson personnel. Unit: sChange takes effect: New connections
y only be changed by Ericsson personnel. Unit: sChange takes effect: New connections
bute may only be changed by Ericsson personnel. Unit: sChange takes effect: New connections
e the cell change order from UTRAN has been sent, the system expects to receive an Iu release command or Cell change failure from U
ment handler function will wait this predetermined time before it sends the first cell list to the UE. This extra delay will decrease the ris
This attribute may only be changed by Ericsson personnel. Special values:0 means no retry. Value mapping:0: 0.0 s1: 0.2 s2: 0.4 s3: 0.6
all measure on. This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections
be triggered during IRAT-HO execution.This attribute may only be changed by Ericsson personnel. Value mapping:1: 0.5 s2: 1.0 s...10: 5
er-frequency Load based handover.Unit: SecondsChange takes effect: Next soft congestionThis attribute may only be changed by Erics
RNC Hard Handover.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdBatonHoSupport
plink initial synchronization is achieved. This parameter is used for the NBAP cell setup message.This attribute may only be changed by
ttribute may only be changed by Ericsson personnel. Unit: 100 ms
onization control frame.This attribute may only be changed by Ericsson personnel.
ctual modification period (MP), in number of frames, equals 2^m.m >= k, where k = max[cnDrxCycleLengthPs, cnDrxCycleLengthCs,
er of repetitions per modification period equals 2^r while the actual repetition period, in number of frames, equals [2^m DIV 2^r], whe
ns in one non-PL cell. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of the mbmsModi
ns in one PL cell. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of the mbmsModificati
r which information is sent on MCCH. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of
ength is calculated as the k'th potential of 2, where k = 6,..,9. The BCCH modification information element should be transmitted in eve
ttribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD
by Ericsson personnel. Filter: FDD
attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effe
attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effe
ibute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect:
ibute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect:
rements.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Uni
and the power value transmitted in System Information is larger than this hysteresis in one cell, an update of system information is initi
This parameter is signaled over NBAP with the values [1..10] slots, where 1 corresponds to an allowed change of the downlink power (
ibute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD
ute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD
ttribute may only be changed by Ericsson personnel. Unit: 10 msChange takes effect: New connectionsFilter: FDD
measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Unit: dBChange tak
r measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Resolution: 10Unit
n a SIR error measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Change
red after a successful "SIR target up" command, for 10 ms TTI users.This attribute may only be changed by Ericsson personnel. Unit: ra
biased towards increased BLER. This parameter is used to compensate for this bias.This attribute may only be changed by Ericsson pers
er measurement used for downlink power balancing.This attribute may only be changed by Ericsson personnel. Dependencies: Changi
urement. This attribute may only be changed by Ericsson personnel. Change takes effect: New connections
he start of the first transmission gap in the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Unit: 0
me containing the start of the first transmission gap in the transmission gap pattern.This attribute may only be changed by Ericsson per
he start of the second transmission gap in the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Uni
me containing the start of the second transmission gap in the transmission gap pattern.This attribute may only be changed by Ericsson
rst slot after transmission gap. This attribute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter:
may only be changed by Ericsson personnel. Change takes effect: New connections
e initiated.This attribute may only be changed by Ericsson personnel. Value mapping:0: None1: Event E2: Event F3: Both (1&2)Filte
ed mode during DL power balancingThis attribute may only be changed by Ericsson personnel. Value mapping:0: 0.0 dB...4: 2.0 dB...20
PCCH part of RABs (or SRB) with a minimum spreading factor >= 32. 'Low' refers to low data transmission capability due to high spr
PDCH part of RABs (or SRB) with a minimum spreading factor >= 32. 'Low' refers to low data transmission capability due to high spr
PCCH part of RABs (or SRB) with a minimum spreading factor in the range 8 < SF <= 16. 'High' refers to high data transmission cap
PDCH part of RABs (or SRB) with a minimum spreading factor in the range 8 < SF <= 16. 'High' refers to high data transmission cap
PCCH part of RABs (or SRB) with a minimum spreading factor <= 8. 'Extra high' refers to extra high data transmission capability due
PDCH part of RABs (or SRB) with a minimum spreading factor <= 8. 'Extra high' refers to extra high data transmission capability due
red after a successful "SIR target up" command, for 2 ms TTI users.This attribute may only be changed by Ericsson personnel. Unit: rad
he PCCPCH RSCP or downlink time slot ISCP is not received from the measurement report. Expressed relative to the value of UtranCell:
used when the uplink time slot ISCP is not received from the measurement report. In the RRC CONNECTION SETUP message, the value
changed by Ericsson personnel.Unit: dBFilter: TDDReplaces: tdTddTpcStepSize
y used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD
ecay used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD
ay used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD
DCH users in the RBS. Needed for RBS hardware consumption calculations in RNC. The calculation is performed in the same way for 2 m
rference level. This attribute may only be changed by Ericsson personnel. Value mapping: 0: -36.0 dB 1: -35.5 dB...34: -19.0 dB...72
d each Module MP.When gpehStorageSize is exceeded, the GPEH function will remove the oldest GPEH file(s) from the persistent stor
ROP files on the O&M MP.When recordingStorageSize is reached, the PM Recording function will remove the oldest recording fil
cy load sharing will be inhibited. Defined in terms of the difference in available resources between the source cell and the target cell.
time at serving HS-DSCH Cell Change.This attribute may only be changed by Ericsson personnel. Dependencies:hsCellChangeCfnOffset
HS MAC-D flow from Source Cell to Target Cell, at Serving HS-DSCH Cell Change.This attribute may only be changed by Ericsson person
han this time to empty its buffer with the current serving grant.This attribute may only be changed by Ericsson personnel.Unit: ms
NL CONGESTION INDICATION control frames, belonging to one flow controlled EUL flow, which are sent towards RBS. The interval is va
es with a DRT Extension. The purpose is to not send DRT Extensions too often. When the parameter is set to zero, no DRT Extensions a
rol frame, for this PQF, that results in a reduced HSDPA bit rate. The reason for checking the presence of these CAPACITY ALLOCATION
PACITY ALLOCATION control frames.Example: New bit rate = Old bit rate * (1- hsMissingCaReduction/100). This attribute may only be
is the shortest dynamic delay that can be detected as soft congestion, expressed as percentage of edchDataFrameDelayThresholdThis
cked in a cell.This attribute may only be changed by Ericsson personnel. Change takes effect: ImmediatelyFilter: FDD
ture Increased RACH Coverage is active.This attribute may only be changed by Ericsson personnel. Value mapping:-360: -36.0 dB-355:
URATION. Stopped at reception of RRC: RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed by Er
CONFIGURATION or RADIO BEARER RECONFIGURATION. Stopped at reception of RRC: TRANSPORT CHANNEL RECONFIGURATION COM
TIATION REQUEST. Stopped at reception of DEDICATED MEASUREMENT INITIATION RESPONSE.Unit: sThis attribute may only be chang
E. Stopped at reception of RRC CONNECTION SETUP COMPLETE.Unit: sThis attribute may only be changed by Ericsson personnel.
UE in state CELL_DCH. Stopped at reception of RRC CONNECTION RELEASE COMPLETE.Unit: sThis attribute may only be changed by Eric
UE in state CELL_FACH. Stopped at reception of RRC CONNECTION RELEASE COMPLETE.Unit: sThis attribute may only be changed by Er
dure. Started at transmission of NBAP RADIO LINK SETUP REQUEST. Stopped at reception of NBAP RADIO LINK SETUP RESPONSE.Unit:
edure. Started at transmission of RNSAP RADIO LINK SETUP REQUEST. Stopped at reception of RNSAP RADIO LINK SETUP RESPONSE.Un
ub).Unit: sThis attribute may only be changed by Ericsson personnel.
ur).Unit: sThis attribute may only be changed by Ericsson personnel.
only be changed by Ericsson personnel.
r RADIO BEARER RECONFIGURATION. Stopped at reception of RRC: RADIO BEARER RELEASE COMPLETE or RADIO BEARER RECONFIGUR
dure. Started at transmission of RRC ACTIVE SET UPDATE REQUEST. Stopped at reception of RRC ACTIVE SET UPDATE COMPLETE or RRC
cedure. Started at transmission of NBAP RADIO LINK ADDITION REQUEST. Stopped at reception of NBAP RADIO LINK ADDITION RESPO
ocedure. Started at transmission of RNSAP RADIO LINK ADDITION REQUEST. Stopped at reception of RNSAP RADIO LINK ADDITION RES
he UE.Unit: msResolution: 250This attribute may only be changed by Ericsson personnel.
node. The value is not used by the RNC.This attribute may only be changed by Ericsson personnel.
e UE.This attribute may only be changed by Ericsson personnel. Value mapping:0: 100 ms1: 200 ms2: 400 ms3: 600 ms4: 800 ms5: 1000
message and UE reception of the Cell Update Confirm message. If not received, the UE sends a new Cell Update. This attribute may onl
Complete message. Set in SIB 1.This attribute may only be changed by Ericsson personnel. Change takes effect: New connections
if "out of service area". Used by Rel-4 and earlier UEs. Rel-5 and later UEs will ignore the value of this attribute.This attribute may onl
Request.Used by the UE.This attribute may only be changed by Ericsson personnel. Change takes effect: New connections
by the UE.This attribute may only be changed by Ericsson personnel.
on release complete message.Used by the UE. This attribute may only be changed by Ericsson personnel. Change takes effect: New co
n system information. This attribute may only be changed by Ericsson personnel. Change takes effect: New connections
tion (UE in DCH).This attribute may only be changed by Ericsson personnel.
(UE in DCH)This attribute may only be changed by Ericsson personnel. Dependencies:Must not be set longer than t313, assuming 1 fram
is attribute may only be changed by Ericsson personnel. Unit: s
e may only be changed by Ericsson personnel. Unit: s
e may only be changed by Ericsson personnel. Special values:0 indicates that the t313 is not in use.Dependencies:Must be set longer th
in number of radio frames added to the activation time (i.e. the CFN) calculated by the RNC using SRB on DCH-DL. This system constan
frames added to the activation time (i.e. the CFN) calculated by the RNC using SRB on HS. This system constant can be calculated in th
by Ericsson personnel. Unit: bit
bflow and more than one subflow exists for one rabType. It is used to create a subflow combination with the correct sduSize paramete
may only be changed by Ericsson personnel. Unit: frames
s. This attribute may only be changed by Ericsson personnel. Value mapping:0: PS only 1: CS only 2: PS and CS
attribute may only be changed by Ericsson personnel.
attribute may only be changed by Ericsson personnel. Value mapping:0: Erroneous SDUs are delivered1: Erroneous SDUs are not delive
e changed by Ericsson personnel.
be changed by Ericsson personnel.
y only be changed by Ericsson personnel.
ay only be changed by Ericsson personnel.
ted for cells in the active set. This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: TrueChange takes eff
nchronization information shall be reported for cells in the detected set. This attribute may only be changed by Ericsson personnel. Va
ted for the cells in the monitored set. This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: TrueChange
eporting evaluation. This attribute may only be changed by Ericsson personnel. Value mapping:2 : Monitored set cells4 : Detected set c
ed periodical reporting due to 'cell addition failure', for event type 1a.Used by UE functions for intra-frequency measurement reportin
t 1a. This attribute may only be changed by Ericsson personnel. Value mapping:1 : Virtual/Active set cells + 12 : Virtual/Active set cells +
rting evaluation. This attribute may only be changed by Ericsson personnel. Value mapping:1: Active set cellsChange takes effect: Ongo
periodic reporting for event 1c. This attribute may only be changed by Ericsson personnel. Value mapping:0: 11: 22: 4...6: 647: infini
t 1c. This attribute may only be changed by Ericsson personnel. Value mapping:1 : Virtual/Active set cells + 12 : Virtual/Active set cells +
his attribute may only be changed by Ericsson personnel. Value mapping:0 : False1 : TrueChange takes effect: Ongoing connections (ne
reported for GSM cells. This attribute may only be changed by Ericsson personnel. Value mapping:0 : False1 : TrueChange takes effect:
t 1d. This attribute may only be changed by Ericsson personnel. Value mapping:1: Virtual/Active set cells + 12: Virtual/Active set cells +
t 3a.This attribute may only be changed by Ericsson personnel. Filter: FDD
g evaluation, for event 6a and 6b.This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections
ted for cells in the Virtual Active Set(s), for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Chang
et(s) shall be done or not, for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Change takes effect:
cy included in the report for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Change takes effect:
M Handover measurements using measurement quantity CPICH Ec/No.This attribute may only be changed by Ericsson personnel. Unit:
s attribute may only be changed by Ericsson personnel.Value mapping:0 : No report 1 : Type 12 : Type 2Filter: TDDReplaces: tdRachSfnS
dover measurements using measurement quantity P-CCPCH RSCP.This attribute may only be changed by Ericsson personnel. Unit: dBm
cation for which the RAB is optimized.This attribute may only be changed by Ericsson personnel. Value mapping:0: Conversational1: St
ged by Ericsson personnel. Value mapping:0: Symmetric Bidirectional1: Asymmetric Unidirectional DL2: Asymmetric Unidirectional UL3
sed on the RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. Unit: bps
d on the RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. Unit: bps
Ericsson personnel. Unit: bit
tile of the distribution of delivered SDUs during the lifetime of a bearer service, where delay for an SDU is defined as the time from a re
d by Ericsson personnel.
Us.This attribute may only be changed by Ericsson personnel. Value mapping:0: Speech1: Unknown
the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps
connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1:
he connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps
connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1:
er for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet
or the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet
er for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet
or the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet
edure. After this length of time, if no response has been received, RNC repeats the initialization procedure. The maximum number of re
e protocol, when it has failed.This attribute may only be changed by Ericsson personnel. Special values:0 is used to indicate that noIucI
ce represents.This attribute may only be changed by Ericsson personnel.
based on RAB Asymmetry Indicator.Applicable for conversational and streaming (value not valid for interactive).Unit: 1 bpsThis attribut
ed on RAB Asymmetry Indicator.Applicable for conversational and streaming (value not valid for interactive).Unit: 1 bpsThis attribute m
tem. Changing it has no effect.Used to determine the value to which IE Activation Time (RRC) and IE CFN (RNSAP and NBAP) shall be se
n Change CFN (RNSAP and NBAP) and TGPS reconfiguration CFN (RRC) shall be set when stopping compressed mode.This attribute may
per RAB type.This attribute may only be changed by Ericsson personnel. Value mapping:0 : not allowed 1 : allowedChange takes effect
hanged by Ericsson personnel. Value mapping:See UeRc class description for list of possible values and their interpretation.Dependenc
attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections (next change of RC state)Filter: FDD
elongs to.This attribute may only be changed by Ericsson personnel.Filter: FDD
ttribute may only be changed by Ericsson personnel. Change takes effect: Next state transitionFilter: FDD
s attribute may only be changed by Ericsson personnel. Change takes effect: Next state transitionFilter: FDD
Rc. This attribute may only be changed by Ericsson personnel. Change takes effect: Next reconfiguration Filter: FDD
ncies: Not used if the license ganMobility is not active. Change takes effect: Ongoing connections (next change of RC state) This attribut
only be changed by Ericsson personnel.Filter: TDD
.This attribute may only be changed by Ericsson personnel.Filter: FDD
ration represented by the UeRc that has the most Transport Format information in the TFCS (the TFC that will result in the maximum n
control function.This attribute may only be changed by Ericsson personnel. Unit: dB
recommended that the value of this attribute should be the same for all flows under a specific UeRc instance.This attribute may only
applies for the EUL MAC-d flow.This attribute may only be changed by Ericsson personnel.
nding MAC-es PDU.It is recommended that the value of this attribute should be the same for all flows under a specific UeRc instance.T
esents.This attribute may only be changed by Ericsson personnel. Special values:Only the values RB_RRC, RB_PS_INTERACTIVE and RB_
port format 1.This attribute may only be changed by Ericsson personnel.
ttribute may only be changed by Ericsson personnel. Specification: 3GPP 25.321
nged by Ericsson personnel.
E for MAC-hs/MAC-ehs data transfer. The parameter value setting is signaled via NBAP and RRC. If MIMO or Multi-Carrier is used for a
its arrival into an HSDPA Priority Queue. The RBS shall use this information to discard out-of-data MAC-hs SDUs from the HSDPA Prior
er T1 controls the stall avoidance in the UE reordering buffer. The parameter value setting is signaled via NBAP and RRC.This attribute m
changed by Ericsson personnel. Unit: kB (1000 bytes)
esents. Special values:Only the values RB_RRC, RB_PS_INTERACTIVE_HS, RB_PS_INTERACTIVE_HS_2, RB_PS_INTERACTIVE_HS_3, and R
ricsson personnel. Filter: TDD
5 - Highest PriorityThis attribute may only be changed by Ericsson personnel. Filter: TDD
DPA users. This attribute may only be changed by Ericsson personnel.Filter: TDD
DPA users. This attribute may only be changed by Ericsson personnel.Filter: TDD
icsson personnel. $FDD{"Value mapping:0: SF 41: SF 82: SF 163: SF 324: SF 645: SF 1286: SF 2567: SF 512"}$TDD{"Value mapping:0: SF
his attribute may only be changed by Ericsson personnel.
e RRC parameter "TFCI existence".DPCH info.This attribute may only be changed by Ericsson personnel. Value mapping:0: No = TFCI n
ed by Ericsson personnel.
may only be changed by Ericsson personnel. Value mapping:0: FIXED1: FLEXIBLEFilter: FDD
eds to be signaled to the UE in case the downlink physical connection uses spreading factor 128 or 256. In all other cases the UE calcul
nged by Ericsson personnel.Value mapping:0: Frame interleaving1: Time Slot interleaving Filter: TDD
nambiguously a downlink CCTrCH within a radio link.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdC
Ericsson personnel.Value mapping:0: QPSK1: 8PSKFilter: TDDReplaces: tdModulation
te may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoChCodesPerTimeSlot
by Ericsson personnel. Filter: TDDReplaces: tdNoTimeSlots
meaning the physical channel with the least number of time slots and least number of channels). This attribute may only be changed b
k rate matching.This attribute may only be changed by Ericsson personnel.Value mapping:0: 40%1: 44%2: 48%...15: 100% Filter: TDDRe
ricsson personnel.Specification: Chapter 8.6.6.16 in TS 25.331 V4.17.0Filter: TDDReplaces: tdRepetitionLength
ricsson personnel.Value mapping:0: RepetitionPeriod_v11: RepetitionPeriod_v22: RepetitionPeriod_v43: RepetitionPeriod_v84: Repeti
PCH. Used for determining the frame offset from the SFN timing in a cell.This attribute may only be changed by Ericsson personnel.Dis
d.Value mapping:0: v41: v82: v163: v32In case of 8 PSK in 1.28Mcps:v4 corresponds to 6 TFCI code word bits.v8 corresponds to 12 TFCI
arying characteristics of the communication channel, Similar to the IE "Tx diversity indicator" for FDD, "TSTD indicator" can be defined
changed by Ericsson personnel.
nged by Ericsson personnel. Specification: 3GPP 25.321
nnelization codes. Only applies when the number of code channels is less than the maximum allowed by the UE capability and restricti
son personnel. Unit: ms
Ericsson personnel. Specification: 3GPP 25.321
tem. Changing it has no effect.TTI budget for an SRB mapped on E-DCH.This attribute may only be changed by Ericsson personnel. Un
tem. Changing it has no effect.TTI budget for a SIP RAB mapped on non-scheduled E-DCH.This attribute may only be changed by Ericss
tem. Changing it has no effect.TTI budget for scheduled flows on E-DCH.This attribute may only be changed by Ericsson personnel. Un
tem. Changing it has no effect.Defines the E-DCH multiplexing option for this E-DCH radio configuration.Value mapping:0: No multiple
onfigured, if the total UE transmit power (after applying DPCCH power adjustments and gain factors) would exceed the available maxim
e changed by Ericsson personnel. Filter: TDD
of this Radio Connection.This attribute may only be changed by Ericsson personnel. Filter: TDD
be changed by Ericsson personnel. Filter: TDD
link.0: UL1: DLThis attribute may only be changed by Ericsson personnel. Filter: TDD
icsson personnel. $FDD{"Value mapping:0: SF 41: SF 82: SF 163: SF 324: SF 645: SF 1286: SF 2567: SF 512"}$TDD{"Value mapping:0: SF
or DPCCH.This attribute may only be changed by Ericsson personnel. Filter: FDD
be changed by Ericsson personnel. Value mapping:0: No = TFCI not present1: Yes = TFCI present
ed by Ericsson personnel.
e matching.This attribute may only be changed by Ericsson personnel. Value mapping:0: 40 %1: 44 %2: 48 %...15: 100 %Unit: %
nged by Ericsson personnel.Value mapping: 0: Frame interleaving1: Time Slot interleaving Filter: TDDReplaces: td2ndInterleavingMode
nambiguously an uplink CCTrCH within a radio link.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdCc
s the time slot format for the first physical channel (meaning the physical channel with the least number of time slots and least numbe
Ericsson personnel.Value mapping:0: QPSK1: 8PSK Filter: TDDReplaces: tdModulation
te may only be changed by Ericsson personnel.Filter: TDDReplaces: tdNoChCodesPerTimeSlot
by Ericsson personnel.Filter: TDDReplaces: tdNoTimeSlots
meaning the physical channel with the least number of time slots and least number of channels). This attribute may only be changed b
ricsson personnel.Specification: Chapter 8.6.6.16 in TS 25.331 V4.17.0Filter: TDDReplaces: tdRepetitionLength
ricsson personnel.Value mapping: 0: RepetitionPeriod_v11: RepetitionPeriod_v22: RepetitionPeriod_v43: RepetitionPeriod_v84: Repe
ons during DTX.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdSpecialBurstScheduling
PCH. Used for determining the frame offset from the SFN timing in a cell.This attribute may only be changed by Ericsson personnel.Dis
d.Value mapping: 0: v41: v82: v163: v32In case of 8 PSK in 1.28Mcps:v4 corresponds to 6 TFCI code word bits.v8 corresponds to 12 TFC
plink transmission timing.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdUlSynchronizationStepFrequ
sion timing.This attribute may only be changed by Ericsson personnel.Unit: 1/8 chipFilter: TDDReplaces: tdUlSynchronizationStepSize
esents.Value RB_RRC is not applicable for this attribute and MO (but is nonetheless allowed to be set).This attribute may only be chang
he AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kb
AL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s
er for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson pers
or the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson personn
he AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kb
AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s
ter for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson per
or the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson person
esents.This attribute may only be changed by Ericsson personnel. Special values:Value RB_PACKET_ADCH, RB_PACKET_ADCH_2, RB_PA
nd UE sideThis attribute may only be changed by Ericsson personnel. Value mapping:0: DCCH Dedicated Control Ch. Valid only on DCS s
side.It is assumed that the same value is used for both DL and UL.0: Acknowledged (AM)1: Transparent (TM)2: Unacknowledged (UM
nt when timer expires and no STATUS is received.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be chang
side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms
or not.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:0
d or not.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping
ected PDU missing.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Valu
acknowledged. RLC info on RNC side. Valid only for SRB with RLC mode = AM.This attribute may only be changed by Ericsson personn
C info on RNC side. Valid only for SRB with RLC mode = AM.This attribute may only be changed by Ericsson personnel.
nfo on RNC side. Valid only for RLC mode = UM and AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: th
a SDU is discarded or reset procedure is initiated.The maximum number of transmissions of a PDU equals MaxDat-1.RLC info on RNC
eset PDU.The maximum number of transmissions of a reset PDU equals MaxRst-1.RLC info on RNC side. Valid only for RLC mode = AM
may only be changed by Ericsson personnel. Special values:0: not used Unit: ms
may only be changed by Ericsson personnel. Special values:0: not used Unit: ms
may only be changed by Ericsson personnel. Special values:0: attribute not used
g.This attribute may only be changed by Ericsson personnel. Special values:0: not usedUnit: %
may only be changed by Ericsson personnel. Special values:0: not used
his attribute may only be changed by Ericsson personnel. Value mapping:0: Timer Based Explicit (can be configured but is not used)1: T
a SDU is discarded or reset procedure is initiated.The number of transmissions is equal to MaxDat - 1.RLC info on UE side UL. Valid on
acknowledged. RLC info on UE side UL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson perso
E side UL. This attribute may only be changed by Ericsson personnel. Value mapping: 0: 50 ms 1: 100 ms 2: 150 ms ..11: 600 ms1
als MaxRst-1.RLC info on UE side UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: MaxRst = 11:
UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values: -1: not used 10..550 ms w
nt when timer expires and no STATUS is received.RLC polling info on UE side UL. Valid only for RLC mode = AM.This attribute may only
UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: not last PDU in Transmission Poll1: last PDU in Tran
UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: not last PDU in Retransmission Poll1: last PDU in R
assumed that the same value is used for both DL and UL.RLC info on UE side DL. Valid for RLC mode = AM and UM.This attribute may o
C info on UE side DL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson personnel. Value mappin
de DL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values: -1: not used 10..550 ms
cted PDU missing. This value is also used in DL RLC Status Info sent on RRC.RLC info on UE side DL. Valid only for RLC mode = AM.This a
may only be changed by Ericsson personnel. Value mapping:-1 Attribute not used.0 1 SDU interval 1 4 SDU intervals 2 16 SDU in
may only be changed by Ericsson personnel. Value mapping:-1 Attribute not used.0 1 PDU interval 1 2 PDU interval 2 4 PDU inter
g.This attribute may only be changed by Ericsson personnel. Special values:0: not usedUnit: %
iation between RB and Transport Channel.RB Mapping Info. This attribute may only be changed by Ericsson personnel.
ng Info. This attribute may only be changed by Ericsson personnel. Value mapping:0: multiplexing is not performed1: multiplexing is pe
e may only be changed by Ericsson personnel. Value mapping:0: DCH1: FACH2: DSCH3: HS-DSCH
C mode = UM, AM and TM.This attribute may only be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: DCH1: RACH
only be changed by Ericsson personnel. Filter: FDD
d to single DCH (1 is used for first RB of RRC).RB Mapping Info.This attribute may only be changed by Ericsson personnel. Filter: TDD
to single DCH (1 is used for highest priority i.e. for the first RB of RRC).RB Mapping Info.This attribute may only be changed by Ericsso
RB45-32:used by other types of radio bearersThis attribute may only be changed by Ericsson personnel. Filter: TDD
ace to use.RLC info is common to both the RNC side and the UE side.0=Rrc1=Speech2=Udi3=PsInteractive4=CsStreaming5=PsStreamin
e changed by Ericsson personnel.Dependencies: The value used for this RAB is the minimum of maxMacdPduSizeExtended and IurLink:
a SDU is discarded or reset procedure is initiated.The maximum number of transmissions of a PDU equals MaxDat-1.This attribute ma
eset PDU.The maximum number of transmissions of a reset PDU equals MaxRst-1.This attribute may only be changed by Ericsson pers
g.This attribute may only be changed by Ericsson personnel. Unit: %
C info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel.
nt when timer expires and no STATUS is received.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be chang
may only be changed by Ericsson personnel. Unit: ms
side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Unit: ms
acknowledged. RLC info on RNC side. Valid only for RLC mode = AM. This attribute may only be changed by Ericsson personnel.
a SDU is discarded or reset procedure is initiated.The number of transmissions is equal to MaxDat - 1.This attribute may only be chang
als MaxRst-1.This attribute may only be changed by Ericsson personnel. Value mapping:0: MaxRst = 11: 42: 63:
g.This attribute may only be changed by Ericsson personnel. Unit: %
C info on UE side DL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson personnel. Value mappin
nt when timer expires and no STATUS is received.RLC polling info on UE side UL. Valid only for RLC mode = AM.This attribute may only
E side UL. This attribute may only be changed by Ericsson personnel. Value mapping: 0: 50 ms 1: 100 ms 2: 150 ms ..11: 600 ms1
de DL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:10..550 ms with resolu
acknowledged. RLC info on UE side UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value
he AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 k
AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s
e AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kb
AL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s
parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personn
ameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel.
parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personn
ameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel. F
d by Ericsson personnel. Filter: TDD
esents.This attribute may only be changed by Ericsson personnel. Special values:Values RB_PS_INTERACTIVE_HS, RB_PS_INTERACTIVE
belongs to. In case of coordinated DCHs, all of them shall have the same attribute value.Frame Handling parameter.This attribute may
ttribute may only be changed by Ericsson personnel. Value mapping: 0: Lowest priority...15: Highest priority
o SP and NBAP/RRC).Frame Handling parameter.Note: NBAP/RRC messages use the opposite enumeration as shown below.This attribu
is attribute may only be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: Normal1: Silent
may only be changed by Ericsson personnel.
may only be changed by Ericsson personnel. Unit: bits
ttribute may only be changed by Ericsson personnel.
only be changed by Ericsson personnel. Value mapping:0: 10 ms1: 20 ms2: 40 ms3: 80 ms Unit: ms
e changed by Ericsson personnel. Value mapping:0: No Coding1: Convolutional2: Turbo
e changed by Ericsson personnel. Value mapping:0: Coding rate = 1/21: Coding rate = 1/3
y Ericsson personnel. Value mapping:0: 0 bits1: 82: 123: 164: 24 bitsUnit: bits
y only be changed by Ericsson personnel. Special values:-1: Not Applicable
y only be changed by Ericsson personnel. Unit: bits
ute may only be changed by Ericsson personnel.
ly be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: 10 ms1: 20 ms2: 40 ms3: 80 ms Unit: ms
hanged by Ericsson personnel. Value mapping:0: No Coding1: Convolutional2: Turbo
hanged by Ericsson personnel. Value mapping:-1: Not Applicable0: Coding rate = 1/21: Coding rate = 1/3
ricsson personnel. Value mapping:-1: Not Applicable0: 0 bits1: 82: 123: 164: 24 bitsUnit: bits
owed for this TrCH.The first element in the array specifies the maximum TFI for TFC Subset 0, the second element specifies the maxim
nk transport channel.Value mapping: 0: Quality evaluation not used1: Quality evaluation used2: Quality evaluation IE will not be sent
ttribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf6Dl
ute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf6Ul
may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf6Dl
y only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf6Ul
g when calculating data amounts to be sent downlink. This attribute may only be changed by Ericsson personnel. Filter: TDD
is attribute may only be changed by Ericsson personnel. Filter: TDD
ttribute may only be changed by Ericsson personnel. Change takes effect: Re-initiation of DL TX carrier power measurements
rement reporting.Used by CellLoad Monitor Initialization in Admission Control.The configured value is divided by 10 by the RNC traffic
r Initialization in Admission Control.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute ma
consumption.Used by Cell Load Monitor in Admission Control.This attribute may only be changed by Ericsson personnel. Disturbances:
consumption.Used by Cell Load Monitor in Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Chang
unt when calculating the ASE. This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affe
nly be changed by Ericsson personnel. Change takes effect: Re-initiation of UL RTWP measurements
ments between reports A and B.It is recommended to set this attribute to an integral multiple of txInterval (in ms).This attribute may o
y Congestion Control.This attribute may only be changed by Ericsson personnel. Unit: msFilter: TDD
ption per RL. Unit: 0.01Changing this attribute may affect ongoing traffic.This attribute may only be changed by Ericsson personnel. Filt
csson personnel. Dependencies:The values in this attribute are displayed in the read-only attribute systemDefaultArpQosFilter: FDD
elay within the RNC in the transmission of each frame.The actual buffering/processing time is affected by the type of traffic frame (tran
lay within the RBS in the transmission of each frame.The actual buffering/processing time is affected by the type of traffic frame (tran
. Used to limit the UE and RNC buffer load reporting intensity.This attribute may only be changed by Ericsson personnel. Value mappin
w connections
y Ericsson personnel. Special values.0: the repeat timer not in use, meaning that a downswitch request will not be repeatedValue map
l switching in case of radio bearer inactivity.This attribute may only be changed by Ericsson personnel. Value mapping:0: Transition to
LL_DCH.This attribute may only be changed by Ericsson personnel. Special values:0: do not release (no need to start measurements or
onFilter: FDD
onFilter: FDD
New connectionFilter: FDD

New connectionFilter: FDD
: New connectionFilter: FDD
: New connectionFilter: FDD
TI .This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
om the RRC message containing the IE DTX-DRX information.This attribute may only be changed by Ericsson personnel.Change takes e
CH transmissions are never restricted to the MAC DTX pattern when it is set to 0 (=infinity).This attribute may only be changed by Erics
priority than the DTX pattern when it is set to -1 (=infinity). This attribute may only be changed by Ericsson personnel.Change takes eff
HS-SCCH set continuously.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
ls in the serving E-DCH radio link set, for EUL 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: N
ls in the serving E-DCH radio link set, for EUL 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect:
e DRX reception pattern.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
connectionFilter: FDD
w connectionFilter: FDD
Ericsson personnel.Change takes effect: New connectionFilter: FDD
PC connections are configured with a pre-defined hardcoded parameter set(CPC profile). If ON, the static configuration associated with
ber of the first transmission gap slot within the first radio frame of the transmission gap pattern. This attribute may only be changed by
ersonnel. Value mapping:Possible values for GSM carrier RSSI Measurement are 3, 4, 5, 7, 10, 14.Possible values for Initial BSIC identific
n personnel. Dependencies:If this parameter is not explicitly set by higher layers, then tGL2 = tGL1. Value mapping:Possible values for
nitial value (set by system) for GSM carrier RSSI Measurement ("CpmTransGapPattSeq=1") is 8.Initial value (set by system) for Initial BS
tial value (set by system) for GSM carrier RSSI Measurement ("CpmTransGapPattSeq=1") is 8.Initial value (set by system) for Initial BSIC
nged by Ericsson personnel. Special values:0 means infinity. Change takes effect: Next configuration of the transmission gap pattern se
ameter is not set by higher layers, then there is only one transmission gap in the transmission gap pattern. If there is only one transmis
nge takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.
is attribute may only be changed by Ericsson personnel. Change takes effect: Next configuration of the transmission gap pattern seque
n personnel. Value mapping:1: 0.5 s2: 1.0 s3: 1.5 s...11: 5.5 s...20: 10.0 sUnit: 0.5 sChange takes effect: Next configuration of the transm
his attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM carrier RSSI measurement
set tProcRncUl + toAWEUl + toAEUl <= 640 [ms] It is recommended to set toAWSUl <= toAEUlUnit: ms
ed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD
onnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD
personnel.Dependencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell man
on personnel.Disturbances:Changing this attribute may affect ongoing traffic.Filter: TDDReplaces: tdTfcs
e may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Dependencies:Before ch
e changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Dependencies:Before changing this att
1.0 s...50: 10 sUnit: 0.2 sChange takes effect: Ongoing connections (next switch to CELL_DCH)
mand or Cell change failure from UTRAN within this amount of time.This attribute may only be changed by Ericsson personnel. Unit: sC
his extra delay will decrease the risk for the UE not to get the initial cell list , since initially it is busy to get synchronized to UTRAN.This a
apping:0: 0.0 s1: 0.2 s2: 0.4 s3: 0.6 s4: 0.8 s5: 1.0 s...50: 10 sUnit: 0.2 sChange takes effect: Ongoing connections (next switch to CELL_D
ing connections
lue mapping:1: 0.5 s2: 1.0 s...10: 5.0 sUnit: 0.5 sChange takes effect: New connections
bute may only be changed by Ericsson personnel. Filter: FDD
dBatonHoSupport
attribute may only be changed by Ericsson personnel. Dependencies: Changing this attribute may affect ongoing traffic.
leLengthPs, cnDrxCycleLengthCs, utranDrxCycleLength] To allow the UE to measure, when applicable, on another frequency when rea
rames, equals [2^m DIV 2^r], where m is the modification period coefficient.[2^m DIV 2^r] >= nrOfRrcFrames, where nrOfRrcFrame
bps.The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to the number of fra
The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to the number of frames
r data rate 7.6 kbps.The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to th
ment should be transmitted in every frame within a defined interval. This interval will be within a specific cycle interval similarly define
t ongoing traffic.Filter: FDD
t ongoing traffic.Change takes effect: New connectionsFilter: FDD

t ongoing traffic.Change takes effect: New connectionsFilter: FDD
ngoing traffic.Change takes effect: New connections
ngoing traffic.Change takes effect: New connectionsFilter: FDD
ute may affect ongoing traffic.Unit: 10 msChange takes effect: New connections
pdate of system information is initiated in that cell.This attribute may only be changed by Ericsson personnel. Value mapping:30: 3.0 dB
ed change of the downlink power (due to downlink power balancing) of at most 1 dB every 1 slot. 10 corresponds to an allowed change
nsFilter: FDD
on personnel. Unit: dBChange takes effect: New connectionsFilter: FDD
son personnel. Resolution: 10Unit: msChange takes effect: New connectionsFilter: FDD
ged by Ericsson personnel. Change takes effect: New connectionsFilter: FDD
ed by Ericsson personnel. Unit: radio frame (10 ms)Change takes effect: New connections
only be changed by Ericsson personnel. Value mapping: 1: 0,1 2: 0,2...10: 1,0Change takes effect: New connections
personnel. Dependencies: Changing this attribute may affect traffic.Change takes effect: New connectionsFilter: FDD
ged by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD
ay only be changed by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD
hanged by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD
may only be changed by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD
kes effect: New connectionsFilter: FDD
E2: Event F3: Both (1&2)Filter: FDD

mapping:0: 0.0 dB...4: 2.0 dB...20: 10.0 dBUnit: 0.5 dBFilter: FDD
mission capability due to high spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personnel. Dep
smission capability due to high spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personnel. Dep
fers to high data transmission capability due to low spreading factor.Used by Power Control.This attribute may only be changed by Eri
efers to high data transmission capability due to low spreading factor.Used by Power Control.This attribute may only be changed by Eri
data transmission capability due to very low spreading factor. Used by Power Control.This attribute may only be changed by Ericsson
data transmission capability due to very low spreading factor. Used by Power Control.This attribute may only be changed by Ericsson
d by Ericsson personnel. Unit: radio frame (10 ms)Filter: FDD
relative to the value of UtranCell::pccpchPower.This attribute may only be changed by Ericsson personnel.Unit: 0.1 dBFilter: TDDRepla
ECTION SETUP message, the value of this attribute is used for the parameter ul-TargetSIR.This attribute may only be changed by Ericsso
performed in the same way for 2 ms and 10 ms TTI, with this constant as input, but the values shall then be rounded up differently dep
B 1: -35.5 dB...34: -19.0 dB...72: 0.0 dBDisturbances:Changing this attribute may affect ongoing traffic.Unit: 0.5 dBFilter: FDD
PEH file(s) from the persistent storage to make space for a new file, and GPEH recording will continue.This attribute may only be chang
will remove the oldest recording file and continue. If the recordingStorageSize is completely used by a single recording file, the PM Reco
he source cell and the target cell. This attribute may only be changed by Ericsson personnel. Unit: %Change takes effect: Immediately
endencies:hsCellChangeCfnOffset >= hsMacdSwitchTimeOffsetFilter: FDD
nly be changed by Ericsson personnel. Dependencies:hsMacdSwitchTimeOffset <= hsCellChangeCfnOffsetUnit: frame
y Ericsson personnel.Unit: ms
ent towards RBS. The interval is valid per flow controlled flow, regardless of which type of TCI that are sent, e.g. with code 2 or 3. This
s set to zero, no DRT Extensions are sent (the feature is turned OFF). This attribute may only be changed by Ericsson personnel. Unit: m
e of these CAPACITY ALLOCATION control frames in RNC is that a CA shall be received at least every one second time interval (more oft
n/100). This attribute may only be changed by Ericsson personnel. Unit: %Change takes effect: New connections
dchDataFrameDelayThresholdThis attribute may only be changed by Ericsson personnel. Unit: %
iatelyFilter: FDD
alue mapping:-360: -36.0 dB-355: -35.5 dB... -190: -19.0 dB... -5: -0.5 dB0: 0 dBUnit: 0.1 dBResolution: 5Change takes effect: Immediat
HANNEL RECONFIGURATION COMPLETE or RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed b
sThis attribute may only be changed by Ericsson personnel.
ibute may only be changed by Ericsson personnel.
ribute may only be changed by Ericsson personnel.
ADIO LINK SETUP RESPONSE.Unit: sThis attribute may only be changed by Ericsson personnel.
P RADIO LINK SETUP RESPONSE.Unit: sThis attribute may only be changed by Ericsson personnel.
TE or RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed by Ericsson personnel.
VE SET UPDATE COMPLETE or RRC ACTIVE SET UPDATE FAILURE.Unit: sThis attribute may only be changed by Ericsson personnel.
BAP RADIO LINK ADDITION RESPONSE or NBAP RADIO LINK ADDITION FAILURE or NBAP ERROR INDICATION.Unit: sThis attribute may o
RNSAP RADIO LINK ADDITION RESPONSE or RNSAP RADIO LINK ADDITION FAILURE or RNSAP ERROR INDICATION.Unit: sThis attribute
400 ms3: 600 ms4: 800 ms5: 1000 ms6: 1200 ms7: 1400 ms8: 1600 ms9: 1800 ms10: 2000 ms11: 3000 ms12: 4000 ms13: 6000 ms14:
ell Update. This attribute may only be changed by Ericsson personnel. 0: 100 ms1: 200 ms2: 400 ms3: 600 ms4: 800 ms5: 1000 ms6: 12
akes effect: New connections
is attribute.This attribute may only be changed by Ericsson personnel. Unit: s
ect: New connections
nnel. Change takes effect: New connections

: New connections
longer than t313, assuming 1 frame = 10 ms.
ependencies:Must be set longer than n315, assuming 1 frame = 10 ms.Unit: s

B on DCH-DL. This system constant can be calculated in the following way: cfnOffsetSrbDchDl = 2*TTI_Alignment_DL + TTI_Alignment_
m constant can be calculated in the following way: cfnOffsetSrbHs = TTI_Alignment_DL+ TTI_Alignment_UL+ UE_Processing_UL_and_D
with the correct sduSize parameters e.g. SID + an AMR rate.This attribute may only be changed by Ericsson personnel.
d1: Erroneous SDUs are not delivered2: No check if SDUs are erroneous
ng:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
changed by Ericsson personnel. Value mapping:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filte
ue mapping:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
onitored set cells4 : Detected set cells5 : Detected set cells and monitored set cellsChange takes effect: Ongoing connections (next swit
frequency measurement reporting (in CELL_DCH). This attribute may only be changed by Ericsson personnel. Value mapping:0: 11: 2
cells + 12 : Virtual/Active set cells + 23 : Virtual/Active set cells + 34 : Virtual/Active set cells + 45 : Virtual/Active set cells + 56 : Virtual/
set cellsChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
ping:0: 11: 22: 4...6: 647: infinityChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
cells + 12 : Virtual/Active set cells + 23 : Virtual/Active set cells + 34 : Virtual/Active set cells + 45 : Virtual/Active set cells + 56 : Virtual/A
es effect: Ongoing connections (next switch to CELL_DCH)
False1 : TrueChange takes effect: Ongoing connections (next time that inter-RAT measurements are started)
ells + 12: Virtual/Active set cells + 23: Virtual/Active set cells + 34: Virtual/Active set cells + 45: Virtual/Active set cells + 56: Virtual/Acti
takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

ged by Ericsson personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started)Filter
on personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started)Filter: FDD
n personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started)
nged by Ericsson personnel. Unit: dBChange takes effect: New connectionsFilter: FDD
e 2Filter: TDDReplaces: tdRachSfnSfnTimeDiffRepInd
d by Ericsson personnel. Unit: dBm Change takes effect: New connectionsFilter: TDD
ue mapping:0: Conversational1: Streaming2: Interactive3: Background
L2: Asymmetric Unidirectional UL3: Asymmetric Bidirectional
DU is defined as the time from a request to transfer of an SDU at one SAP to its delivery to the other SAP.Used to specify the delay tole
Value mapping:0: 0 bps1: 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps

ue mapping:0: 0 bps1: 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps
alue mapping:0: 0 bps1: 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps
e mapping:0: 0 bps1: 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps
onnel. Unit: octet
el. Unit: octet
nnel. Unit: octet
el. Unit: octet
dure. The maximum number of repeated attempts is defined in noIucInitRep.This attribute may only be changed by Ericsson personne
es:0 is used to indicate that noIucInitRep is not in use.Change takes effect: New connections
nteractive).Unit: 1 bpsThis attribute may only be changed by Ericsson personnel. Filter: TDD
ractive).Unit: 1 bpsThis attribute may only be changed by Ericsson personnel. Filter: TDD
CFN (RNSAP and NBAP) shall be set when starting compressed mode.This attribute may only be changed by Ericsson personnel. Value
mpressed mode.This attribute may only be changed by Ericsson personnel. Value mapping:1: 1002: 1503: 200Change takes effect: Next
wed 1 : allowedChange takes effect: Ongoing connections (next change of RC state)
nd their interpretation.Dependencies: This attribute has the same value as the value part of the RDN (UeRcId).
ext change of RC state)Filter: FDD
tion Filter: FDD

xt change of RC state) This attribute may only be changed by Ericsson personnel.Filter: FDD
that will result in the maximum number of TB's with largest size being applied).This attribute may only be changed by Ericsson person
instance.This attribute may only be changed by Ericsson personnel.
s under a specific UeRc instance.This attribute may only be changed by Ericsson personnel. Unit: msChange takes effect: New connecti
RRC, RB_PS_INTERACTIVE and RB_PS_INTERACTIVE_2 are applicable for this attribute and MO (even though the other values are allow
MO or Multi-Carrier is used for a HS-DSCH connection, the value signaled is min(32, 2 * macHsWindowSize).This attribute may only be
AC-hs SDUs from the HSDPA Priority Queues. The parameter value setting is signaled via NBAP.This attribute may only be changed by E
via NBAP and RRC.This attribute may only be changed by Ericsson personnel.Unit: ms
RB_PS_INTERACTIVE_HS_3, and RB_PS_STREAMING_HS are applicable for this attribute and MO (even though the other values are al
512"}$TDD{"Value mapping:0: SF 11: SF 16"}
nel. Value mapping:0: No = TFCI not present; same as "TFCI existence" = FALSE1: Yes = TFCI present; same as "TFCI existence" = TRUE
56. In all other cases the UE calculates the number of pilot bits based on slot format information. The number of pilot bits is not signale
personnel.Filter: TDDReplaces: tdCcTrChId
s attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdOtherTimeSlotFormat

4%2: 48%...15: 100% Filter: TDDReplaces: tdPunctureLimit
v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in TS

hanged by Ericsson personnel.Disturbances:Changing this attribute will affect ongoing traffic.Filter: TDDReplaces: tdTddDpchOffsetVal
ord bits.v8 corresponds to 12 TFCI code word bits.v16 corresponds to 24 TFCI code word bits.v32 corresponds to 48 TFCI code word bi
, "TSTD indicator" can be defined and used to inform the application of TSTD to DPCH.This attribute may only be changed by Ericsson p
d by the UE capability and restrictions imposed by UTRAN.This attribute may only be changed by Ericsson personnel. Resolution: 4
hanged by Ericsson personnel. Unit: %

ute may only be changed by Ericsson personnel. Unit: %
hanged by Ericsson personnel. Unit: %
tion.Value mapping:0: No multiplexing except among scheduled flows.1: Multiplexing among non-scheduled flows allowed except betw
would exceed the available maximum power, the UE shall firstly reduce the E-DPDCH power with the E-DPDCH gain factor so that the
512"}$TDD{"Value mapping:0: SF 11: SF 22: SF 43: SF 84: SF 16 "}
44 %2: 48 %...15: 100 %Unit: %

Replaces: td2ndInterleavingMode
ersonnel. Filter: TDDReplaces: tdCcTrChId
ber of time slots and least number of channels). This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdDpc
s attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdOtherTimeSlotFormat
_v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in T

cialBurstScheduling
hanged by Ericsson personnel.Disturbances:Changing this attribute will affect ongoing traffic.Filter: TDDReplaces: tdTddDpchOffsetVal
word bits.v8 corresponds to 12 TFCI code word bits.v16 corresponds to 24 TFCI code word bits.v32 corresponds to 48 TFCI code word b
es: tdUlSynchronizationStepFrequency
es: tdUlSynchronizationStepSize
t).This attribute may only be changed by Ericsson personnel.
t/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD
32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD
only be changed by Ericsson personnel. Filter: TDD
y be changed by Ericsson personnel. Filter: TDD
.32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD
y only be changed by Ericsson personnel. Filter: TDD
nly be changed by Ericsson personnel. Filter: TDD
DCH, RB_PACKET_ADCH_2, RB_PACKET_ADCH_3 and RB_STREAMING_ADCH are not applicable for this attribute and MO (but are no
ted Control Ch. Valid only on DCS side1: DTCH Dedicated Traffic Ch. Valid only on DCS side2: BCCH Broadcast Control Channel. Valid on
ent (TM)2: Unacknowledged (UM)This attribute may only be changed by Ericsson personnel.
M.This attribute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms
l values:0: not used Unit: ms
csson personnel. Value mapping:0: poll not used1: poll used
ricsson personnel. Value mapping:0: poll not used1: poll used
anged by Ericsson personnel. Value mapping:0: RNC shall not send STATUS reports1: RNC shall send STATUS reports
y be changed by Ericsson personnel.
csson personnel.
on personnel. Value mapping:0: the value can be configured but in-sequence delivery will still be used, that is, in-sequence delivery is
equals MaxDat-1.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel.
de. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel.
be configured but is not used)1: Timer Based No Explicit (can be configured but is not used)2: Max Dat (can be configured but is not us
1.RLC info on UE side UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping: 2:
only be changed by Ericsson personnel. Value mapping: 0:1 Max PDU sent 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:
100 ms 2: 150 ms ..11: 600 ms12: 700 ms..15: 1000 msUnit: ms
e mapping:0: MaxRst = 11: 42: 63: 84: 125: 166: 247: MaxRst =32
values: -1: not used 10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms
mode = AM.This attribute may only be changed by Ericsson personnel. Special values:-1: not used 10 .. 550 ms with resolution 10600 ..
mission Poll1: last PDU in Transmission Poll
ransmission Poll1: last PDU in Retransmission Poll
= AM and UM.This attribute may only be changed by Ericsson personnel. Value mapping:0: in-sequence delivery shall not be used1: in-
Ericsson personnel. Value mapping: 0:1 PDU in buffer 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:25
ial values: -1: not used 10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms
alid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: UE shall not send STATUS rep
l 1 4 SDU intervals 2 16 SDU intervals 3 64 SDU intervals
1 2 PDU interval 2 4 PDU interval 3 8 PDU interval 4 16 PDU interval 5 32 PDU interval 6 64 PDU interval 7 128 PDU interva
ricsson personnel.
ot performed1: multiplexing is performed
:-1: Not Applicable0: DCH1: RACH2: CPCH3: E-DCH
Ericsson personnel. Filter: TDD

e may only be changed by Ericsson personnel. Filter: TDD
el. Filter: TDD
ctive4=CsStreaming5=PsStreamingThis attribute may only be changed by Ericsson personnel. Filter: TDD
MacdPduSizeExtended and IurLink::maxMacdPduSizeExtendedUnit: bytesChange takes effect: New connections
equals MaxDat-1.This attribute may only be changed by Ericsson personnel.
only be changed by Ericsson personnel.
M.This attribute may only be changed by Ericsson personnel. Unit: ms

1.This attribute may only be changed by Ericsson personnel. Value mapping: 2: MaxDat = 3 3: 4 4: 5 5:
11: 42: 63: 84: 125: 166: 247: MaxRst =32
Ericsson personnel. Value mapping: 0:1 PDU in buffer 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:25
mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:10 .. 550 ms with resolution 10600 ..1000ms wit
100 ms 2: 150 ms ..11: 600 ms12: 700 ms..15: 1000 msUnit: ms
e mapping:10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms
anged by Ericsson personnel. Value mapping: 0:1 Max PDU sent 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2
/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD
ly be changed by Ericsson personnel. Filter: TDD
y be changed by Ericsson personnel. Filter: TDD
RACTIVE_HS, RB_PS_INTERACTIVE_2, RB_PS_INTERACTIVE_3, RB_PS_INTERACTIVE_HS_2, RB_PS_INTERACTIVE_HS_3, RB_PACKET_AD

dling parameter.This attribute may only be changed by Ericsson personnel.
ration as shown below.This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: True
0 ms Unit: ms
ond element specifies the maximum TFI for TFC Subset 1, and so forth."}$TDD{"Element [0] is used as the equivalent of rateMatchingA
ality evaluation IE will not be sent in the NBAP message.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces
n personnel. Filter: TDD
er power measurements
s divided by 10 by the RNC traffic application before it is sent on NBAP to RBS.This attribute may only be changed by Ericsson personne
bances:Changing this attribute may affect ongoing traffic.Change takes effect: Re-initiation of Admission Control measurements
Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic. Whenever its value is set, the cell is disabled auto
Ericsson personnel. Unit: %Change takes effect: Immediately
es:Changing this attribute may affect ongoing traffic. Whenever its value is set, the cell is disabled automatically and then re-enabled.C
terval (in ms).This attribute may only be changed by Ericsson personnel. Unit: 10 msFilter: TDD
hanged by Ericsson personnel. Filter: TDD

ystemDefaultArpQosFilter: FDD
d by the type of traffic frame (transport block type) as well as load, processing type, etc. If this value is set too low, frames may be lost
d by the type of traffic frame (transport block type) as well as load, processing type, etc. If this value is set too low, frames may be lost
Ericsson personnel. Value mapping:0: 0.25 s1: 0.5 s2: 1 s3: 2 s4: 4 s5: 8 s6: 16 sChange takes effect: New connections
est will not be repeatedValue mapping:1: 50 ms...4: 200 ms...40: 2000msUnit: 50 msChange takes effect: New connections
el. Value mapping:0: Transition to common channel (RACH/FACH) is not allowed1: Transition to common channel (RACH/FACH) is allow
no need to start measurements or algorithm)Unit: sChange takes effect: New connections
Ericsson personnel.Change takes effect: New connectionFilter: FDD

bute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
csson personnel.Change takes effect: New connectionFilter: FDD
ect: New connectionFilter: FDD

personnel.Change takes effect: New connectionFilter: FDD
n personnel.Change takes effect: New connectionFilter: FDD
ct: New connectionFilter: FDD
atic configuration associated with the CPC profile is overridden by the values set for the parameters of the MO CPC.This attribute may
attribute may only be changed by Ericsson personnel. Change takes effect: Next configuration of the transmission gap pattern sequen
sible values for Initial BSIC identification are 7, 10, 14.Possible values for BSIC re-confirmation are 7, 10, 14.Possible values for Inter Fre
Value mapping:Possible values for GSM carrier RSSI Measurement are 3, 4, 5, 7, 10, 14.Possible values for Initial BSIC identification are
value (set by system) for Initial BSIC identification ("CpmTransGapPattSeq=2") is 8.Initial value (set by system) for BSIC re-confirmation
alue (set by system) for Initial BSIC identification ("CpmTransGapPattSeq=2") is 8.Initial value (set by system) for BSIC re-confirmation
of the transmission gap pattern sequence in UE, DRNC or RBS.
ttern. If there is only one transmission gap in the transmission gap pattern, this parameter shall be set to 0.This attribute may only be
he transmission gap pattern sequence in UE, DRNC or RBS.

t: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.
or GSM carrier RSSI measurement ("CpmTransGapPattSeq=1") is 0.Initial value (set by system) for Initial BSIC identification ("CpmTrans
so, lock the parent UtranCell manually before changing both.Disturbances:Changing this attribute may affect ongoing traffic.Unit: 4 %
ng traffic.Dependencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell manua
endencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell manually before ch
ged by Ericsson personnel. Unit: sChange takes effect: New connections

get synchronized to UTRAN.This attribute may only be changed by Ericsson personnel. Unit: sChange takes effect: Ongoing connection
connections (next switch to CELL_DCH)Filter: FDD
ect ongoing traffic.
e, on another frequency when reading MCCH there has to be some gaps in the MCCH transmission (the MP shall not be fully utilized).
fRrcFrames, where nrOfRrcFrames defines the number of frames the MCCH information requires in each Repetition Period. (Note: nrO
ependencies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kbps. Parameters n
dencies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kbps. Parameters nonP
dCoeff (r) have dependencies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kb
cific cycle interval similarly defined as DRX cycle length.Special values:Initially set by the system to 9 (corresponds to cycle length 5,120
rsonnel. Value mapping:30: 3.0 dB31: 3.1 dB...60: 6.0 dBUnit: 0.1 dBFilter: FDD
corresponds to an allowed change of the downlink power of at most 1 dB every 10 slots.maxAdjustmentStep = 1 corresponds to a limi
New connections
ctionsFilter: FDD
anged by Ericsson personnel. Dependencies:Note that either gainFactorCLow or gainFactorDLow must be equal to 15.Filter: FDD
anged by Ericsson personnel. Dependencies:Note that either gainFactorCLow or gainFactorDLow must be equal to 15.
ribute may only be changed by Ericsson personnel. Dependencies:Note that either gainFactorCHigh or gainFactorDHigh must be equal
ribute may only be changed by Ericsson personnel. Dependencies:Note that either gainFactorCHigh or gainFactorDHigh must be equal
may only be changed by Ericsson personnel. Dependencies:gainFactorCExtraHigh or gainFactorDExtraHigh must be equal to 15
may only be changed by Ericsson personnel. Dependencies:gainFactorCExtraHigh or gainFactorDExtraHigh must be equal to 15Filter: F
onnel.Unit: 0.1 dBFilter: TDDReplaces: tdDefaultInitDlTransPower

te may only be changed by Ericsson personnel.Unit: dBmFilter: TDDReplaces: tdDefaultPrxDpchDes
hen be rounded up differently depending on the used TTI. This attribute may only be changed by Ericsson personnel. Dependencies: T
traffic.Unit: 0.5 dBFilter: FDD
e.This attribute may only be changed by Ericsson personnel.Dependencies: The size of the GPEH file may never exceed the available GP
single recording file, the PM Recording function will stop the recording until the next ROP begins.This attribute may only be changed b
Change takes effect: Immediately
nOffsetUnit: frame
re sent, e.g. with code 2 or 3. This attribute may only be changed by Ericsson personnel. Unit: msResolution: 50
ged by Ericsson personnel. Unit: msResolution: 10Change takes effect: New connections
one second time interval (more often or once per second). If this doesn't happen, it is likely that a CA is dropped over the transport ne
onnections
n: 5Change takes effect: ImmediatelyFilter: FDD
s attribute may only be changed by Ericsson personnel.
icsson personnel.
anged by Ericsson personnel.
CATION.Unit: sThis attribute may only be changed by Ericsson personnel.
INDICATION.Unit: sThis attribute may only be changed by Ericsson personnel.
00 ms12: 4000 ms13: 6000 ms14: 8000 msChange takes effect: New connections
: 600 ms4: 800 ms5: 1000 ms6: 1200 ms7: 1400 ms8: 1600 ms9: 1800 ms10: 2000 ms11: 3000 ms12: 4000 ms13: 6000 ms14: 8000 ms
I_Alignment_DL + TTI_Alignment_UL + UE_Processing_UL_and_DL Default value is calculated as: 2*4+4+6=18 radio frames Unit: 10 m
ent_UL+ UE_Processing_UL_and_DL Default value is calculated as: 2+10+60ms=72ms=8 radio framesUnit: 10 msChange takes effect: A
icsson personnel.
ons (next switch to CELL_DCH)Filter: FDD
ct: Ongoing connections (next switch to CELL_DCH)Filter: FDD

rsonnel. Value mapping:0: 11: 22: 4...6: 647: infinityChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
tual/Active set cells + 56 : Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
DCH)Filter: FDD
tual/Active set cells + 56 : Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
al/Active set cells + 56: Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD
y measurements are started)Filter: FDD

nts are started)Filter: FDD
ts are started)
SAP.Used to specify the delay tolerated by the application. It allows UTRAN to set transport formats and ARQ parameters.This attribut
be changed by Ericsson personnel. Special values:0 is used to indicate that iucInitTimer is not in use.Unit: sChange takes effect: New c
ged by Ericsson personnel. Value mapping:1: 752: 1203: 150Change takes effect: Next configuration of the transmission gap pattern se
503: 200Change takes effect: Next stop of CPM
nly be changed by Ericsson personnel. Filter: TDD
Change takes effect: New connections

though the other values are allowed to be set).
owSize).This attribute may only be changed by Ericsson personnel.

ttribute may only be changed by Ericsson personnel.Unit: ms
ven though the other values are allowed to be set).This attribute may only be changed by Ericsson personnel. Filter: FDD
same as "TFCI existence" = TRUE
e number of pilot bits is not signaled towards the RBS. For downlink physical connections using other spreading factors, the configured
pecification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod

DDReplaces: tdTddDpchOffsetValue
responds to 48 TFCI code word bits.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdTfciCoding
may only be changed by Ericsson personnel.Value mapping:0: active1: inactive Filter: TDDReplaces: tdTstdIndicator
sson personnel. Resolution: 4
heduled flows allowed except between SRB and a non-scheduled SIP (if exists), among scheduled flows allowed, but not between sche
e E-DPDCH gain factor so that the total transmit power would be equal to the available maximum power. If the total transmit power is
onnel. Filter: TDDReplaces: tdDpchSlotFormat
pecification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod

DDReplaces: tdTddDpchOffsetValue
rresponds to 48 TFCI code word bits.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdTfciCoding
this attribute and MO (but are nonetheless allowed to be set).

roadcast Control Channel. Valid only on CCS side.3: CCCH Common Control Channel. Valid only on CCS side.4: PCCH Paging Control Cha
ll send STATUS reports
ed, that is, in-sequence delivery is predefined.1: in-sequence delivery shall be used
ged by Ericsson personnel.
at (can be configured but is not used)3: No Discard (AM), SDU Discard not configured (TM and UM)
on personnel. Value mapping: 2: MaxDat = 3 3: 4 4: 5 5: 6 6: 7 7: 8 8:
8 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584
247: MaxRst =32
.. 550 ms with resolution 10600 ..1000ms with resolution 50Unit: ms
ce delivery shall not be used1: in-sequence delivery shall be used

8 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584 15:4095
ng:0: UE shall not send STATUS reports1: UE shall send STATUS reports
4 PDU interval 7 128 PDU interval

4 4: 5 5: 6 6: 7 7: 8 8: 9 9: 1010: 1511: 2012:
8 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584 15:4095

ith resolution 10600 ..1000ms with resolution 50Unit: ms
:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584
TERACTIVE_HS_3, RB_PACKET_ADCH_2 and RB_PACKET_ADCH_3, RB_PS_STREAMING_HS are not applicable for this attribute and MO
False1: True
as the equivalent of rateMatchingAttrDlTdd: Rate matching attribute in downlink.Element [1] is used as the equivalent of rateMatching
on personnel. Filter: TDDReplaces: tdDlQeSelector
y be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Unit: msResolution: 100Change ta
sion Control measurements
alue is set, the cell is disabled automatically and then re-enabled.Change takes effect: Object disabled/enabledUnit: %
tomatically and then re-enabled.Change takes effect: Object disabled/enabledUnit: 0.01

is set too low, frames may be lost or discarded (due to too-late arrival).This attribute may only be changed by Ericsson personnel. Unit
s set too low, frames may be lost or discarded (due to "too late" arrival).This attribute may only be changed by Ericsson personnel. Un
New connections
ect: New connections

mon channel (RACH/FACH) is allowedChange takes effect: New connections
of the MO CPC.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD
transmission gap pattern sequence in UE, DRNC or RBS.
10, 14.Possible values for Inter Frequency measurements are 7, 10, 14.Since the value ranges are different for each pattern sequence,
s for Initial BSIC identification are 7, 10, 14.Possible values for BSIC re-confirmation are 7, 10, 14.Possible values for Inter Frequency m
y system) for BSIC re-confirmation ("CpmTransGapPattSeq=3") is 8.Initial value (set by system) for Inter Frequency measurements ("C
system) for BSIC re-confirmation ("CpmTransGapPattSeq=3") is 8.Initial value (set by system) for Inter Frequency measurements ("Cp
et to 0.This attribute may only be changed by Ericsson personnel. Special values:0 means undefinedChange takes effect: Next configur
tial BSIC identification ("CpmTransGapPattSeq=2") is 2.Initial value (set by system) for BSIC reconfirmation ("CpmTransGapPattSeq=3")
ay affect ongoing traffic.Unit: 4 %Filter: TDDReplaces: tdSccpchPunctureLimit
o, lock the parent UtranCell manually before changing both. Filter: TDD
rent UtranCell manually before changing both.Filter: TDD
e takes effect: Ongoing connections
he MP shall not be fully utilized). Note: The UE and SGSN can negotiate the value of the cnDrxCycleLengthPs. This case can not be han
each Repetition Period. (Note: nrOfRrcFrames is not a parameter but only a definition in the above equation.)This attribute may only b
e data rate 7.6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of frames to be sche
a rate 7.6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of frames to be scheduled
n MCCH with the data rate 7.6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of fr
(corresponds to cycle length 5,120 s).This attribute may only be changed by Ericsson personnel.
mentStep = 1 corresponds to a limit on rate of change of 1 dB/slot.maxAdjustmentStep = 10 corresponds to a limit on rate of change o
st be equal to 15.Filter: FDD
st be equal to 15.
or gainFactorDHigh must be equal to 15.Filter: FDD
or gainFactorDHigh must be equal to 15.
aHigh must be equal to 15
raHigh must be equal to 15Filter: FDD
csson personnel. Dependencies: The same constant is defined in the RBS for the scheduler. These constants should be set to the same
may never exceed the available GPEH storage size on each MP (gpehStorageSize >= gpehFileSize).Unit: kB (1000 bytes)Change takes
is attribute may only be changed by Ericsson personnel. Dependencies: The file sizes for UETR and CTR recordings may never exceed th
olution: 50
A is dropped over the transport network. Further on, if several CA control frames are dropped, not received in RNC, it could mean that
: 4000 ms13: 6000 ms14: 8000 ms
4+4+6=18 radio frames Unit: 10 msChange takes effect: At next synchronized reconfiguration of the connection This attribute may only
Unit: 10 msChange takes effect: At next synchronized reconfiguration of the connection.This attribute may only be changed by Ericsso
ext switch to CELL_DCH)Filter: FDD

switch to CELL_DCH)Filter: FDD
switch to CELL_DCH)Filter: FDD
tch to CELL_DCH)Filter: FDD

and ARQ parameters.This attribute may only be changed by Ericsson personnel. Unit: ms
.Unit: sChange takes effect: New connections
of the transmission gap pattern sequence in UE, DRNC or RBS.
ersonnel. Filter: FDD

r spreading factors, the configured value will not be used by the RNC, but has to be set anyway since the parameter is defined as mand
TDDReplaces: tdTfciCoding
dTstdIndicator
ws allowed, but not between scheduled and non-scheduled flows.2: All multiplexing allowed except between SRB and scheduled flows
wer. If the total transmit power is still higher than the available maximum power after applying the gain factor the E-DPDCH and the D
TDDReplaces: tdTfciCoding
S side.4: PCCH Paging Control Channel. Valid only on CCS side.
7 7: 8 8: 9 9: 1010: 1511: 2012: 2513: 3014: 3515

1511: 2012: 2513: 3014: 3515: MaxDat = 40
plicable for this attribute and MO (but are nonetheless allowed to be set).
as the equivalent of rateMatchingAttrUlTdd: Rate matching attribute in uplink.The remaining elements are not used."}The attribute m
Unit: msResolution: 100Change takes effect: Re-initiation of Admission Control measurements
d/enabledUnit: %
anged by Ericsson personnel. Unit: ms
hanged by Ericsson personnel. Unit: ms
onnectionFilter: FDD
erent for each pattern sequence, the system will not check the range. It is the responsibility of the user (Ericsson personnel) to check t
sible values for Inter Frequency measurements are 7, 10, 14.Since the value ranges are different for each pattern sequence, the system
ter Frequency measurements ("CpmTransGapPattSeq=4") is 4.Value mapping:Possible value for GSM carrier RSSI Measurement is 8.Po
er Frequency measurements ("CpmTransGapPattSeq=4") is 4.Dependencies:It is up to the user (Ericsson personnel) to make sure tGLP
Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.
mation ("CpmTransGapPattSeq=3") is 6.Initial value (set by system) for Inter Frequency measurements ("CpmTransGapPattSeq=4") is 0.
engthPs. This case can not be handled by the system. This attribute may only be changed by Ericsson personnel.Change takes effect: A
quation.)This attribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restar
s on number of frames to be scheduled in a worst case scenario.It must be considered when changing any of the above parameters th
number of frames to be scheduled in a worst case scenario.It must be considered when changing any of the above parameters that th
ellsMax put limits on number of frames to be scheduled in a worst case scenario.It must be considered when changing any of the abov
onds to a limit on rate of change of 0.1 dB/slot.This attribute may only be changed by Ericsson personnel. Change takes effect: New co
nstants should be set to the same value. Unit: kbps (1000 bits per second)Resolution: 32Change takes effect: Ongoing connectionsFilte
Unit: kB (1000 bytes)Change takes affect: Next ROP

TR recordings may never exceed the available recording storage size on the central O&M MP: recordingStorageSize >= ctrFileS
ceived in RNC, it could mean that the best effort type of transport network is congested. This attribute may only be changed by Ericsso
connection This attribute may only be changed by Ericsson personnel.
e may only be changed by Ericsson personnel.
the parameter is defined as mandatory in the MOM. Any of the defined values will work.This attribute may only be changed by Ericsso
between SRB and scheduled flows or non-scheduled SIP (if exists).3: All multiplexing allowed except between SRB and a non-scheduled
gain factor the E-DPDCH and the DPCCH are equally scaled to meet the available maximum power. This parameter configures the minim
13: 3014: 3515: MaxDat = 40
nts are not used."}The attribute must have all elements set.This attribute may only be changed by Ericsson personnel. Special values:-1
ser (Ericsson personnel) to check the range when configuring the parameter. Change takes effect: Next configuration of the transmissio
each pattern sequence, the system will not check the range. It is the responsibility of the user (Ericsson personnel) to check the range
M carrier RSSI Measurement is 8.Possible values for Initial BSIC identification are 3, 4, 8, 12, 24.Possible values for BSIC re-confirmation
son personnel) to make sure tGLP1 = tGPL2 for subsequent changes during operation. There is no check in the code for this.Value map
s ("CpmTransGapPattSeq=4") is 0.Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RB
personnel.Change takes effect: At MbmsCch lock/unlock and at system restart
h lock/unlock and at system restart
ng any of the above parameters that the number of frames to be scheduled on MCCH for RRC messages does not exceed the number o
y of the above parameters that the number of frames to be scheduled on MCCH for RRC messages does not exceed the number of fram
ed when changing any of the above parameters that the number of frames to be scheduled on MCCH for RRC messages does not excee
nnel. Change takes effect: New connectionsFilter: FDD

s effect: Ongoing connectionsFilter: FDD
ecordingStorageSize >= ctrFileSize, recordingStorageSize >= uetrFileSizeUnit: kB (1000 bytes)Change takes effect: Next ROP
te may only be changed by Ericsson personnel. Special values:0 defines that CA presence supervision is turned off.Unit: 0.1 sChange ta
te may only be changed by Ericsson personnel. Filter: FDD
between SRB and a non-scheduled SIP (if exists). This attribute may only be changed by Ericsson personnel.
his parameter configures the minimum factor to be used by Rel-8 UEs for reduction of the E-DPDCH gain factor. The configured value is
csson personnel. Special values:-1: not applicable
xt configuration of the transmission gap pattern sequence in UE, DRNC or RBS.
on personnel) to check the range when configuring the parameter. Change takes effect: Next configuration of the transmission gap pa
le values for BSIC re-confirmation are 3, 4, 8, 12, 15, 23, 24.Possible values for Inter Frequency measurements are 3, 4, 8, 12, 24, 35.Sin
eck in the code for this.Value mapping:Possible value for GSM carrier RSSI Measurement is 8.Possible values for Initial BSIC identificati
ttern sequence in UE, DRNC or RBS.

ges does not exceed the number of frames that can be scheduled per Repetition Period on MCCH.This attribute may only be changed b
oes not exceed the number of frames that can be scheduled per Repetition Period on MCCH.This attribute may only be changed by Eri
H for RRC messages does not exceed the number of frames that can be scheduled per Repetition Period on MCCH.This attribute may on
ange takes effect: Next ROP
is turned off.Unit: 0.1 sChange takes effect: New connections

gain factor. The configured value is divided by 15 to obtain the scaling factor used by the UE. -1 means that this attribute is not applica
uration of the transmission gap pattern sequence in UE, DRNC or RBS.
urements are 3, 4, 8, 12, 24, 35.Since the value ranges are different for each pattern sequence, the system will only check that the valu
e values for Initial BSIC identification are 3, 4, 8, 12, 24.Possible values for BSIC re-confirmation are 3, 4, 8, 12, 15, 23, 24.Possible value
s attribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restartFilter: FDD
ribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restart
od on MCCH.This attribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system re
ns that this attribute is not applicable for this instance.This attribute may only be changed by Ericsson personnel.Unit: 1 / 15 Change ta
ystem will only check that the value is within the full range defined for the parameter. There is no check that a value for a specific sequ
, 4, 8, 12, 15, 23, 24.Possible values for Inter Frequency measurements are 3, 4, 8, 12, 24, 35.Since the value ranges are different for ea
k and at system restartFilter: FDD
d at system restart
sCch lock/unlock and at system restart
n personnel.Unit: 1 / 15 Change takes effect: Immediately
eck that a value for a specific sequence is within the range for that sequence. For example, the value 23 will be accepted for Initial BS
e value ranges are different for each pattern sequence, the system will only check that the value is within the full range defined for the
e 23 will be accepted for Initial BSIC identification. It is the responsibility of the user (Ericsson personnel) to check that the value for a
within the full range defined for the parameter. There is no check that a value for a specific sequence is within the range for that seque
nnel) to check that the value for a specific sequence is within the range of that sequence when configuring the parameter. Change take
is within the range for that sequence. For example, the value 23 will be accepted for Initial BSIC identification. It is the responsibility
guring the parameter. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.
ntification. It is the responsibility of the user (Ericsson personnel) to check that the value for a specific sequence is within the range of
nce in UE, DRNC or RBS.
fic sequence is within the range of that sequence when configuring the parameter. Change takes effect: Next configuration of the trans
ct: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.

RNC Internal System Parameter Timervalues

Uploaded by

Copyright:

Available Formats

RNC Internal System Parameter Timervalues

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RNC Internal System Parameter Timervalues

Uploaded by

Copyright:

Available Formats

Class_MO Param_name Ericsson_Constant

ArpMap systemDefaultArpQosEo YES

New connectionFilter: FDD

t ongoing traffic.Change takes effect: New connectionsFilter: FDD

E2: Event F3: Both (1&amp;2)Filter: FDD

nnel. Change takes effect: New connections

longer than t313, assuming 1 frame = 10 ms.

ependencies:Must be set longer than n315, assuming 1 frame = 10 ms.Unit: s

takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

Value mapping:0: 0 bps1: 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps

tion Filter: FDD

instance.This attribute may only be changed by Ericsson personnel.

personnel.Filter: TDDReplaces: tdCcTrChId

s attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdOtherTimeSlotFormat

v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in TS

hanged by Ericsson personnel. Unit: %

512"}$TDD{"Value mapping:0: SF 11: SF 22: SF 43: SF 84: SF 16 "}

44 %2: 48 %...15: 100 %Unit: %

s attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdOtherTimeSlotFormat

_v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in T

:-1: Not Applicable0: DCH1: RACH2: CPCH3: E-DCH

Ericsson personnel. Filter: TDD

M.This attribute may only be changed by Ericsson personnel. Unit: ms

nged by Ericsson personnel.

RACTIVE_HS, RB_PS_INTERACTIVE_2, RB_PS_INTERACTIVE_3, RB_PS_INTERACTIVE_HS_2, RB_PS_INTERACTIVE_HS_3, RB_PACKET_AD

n personnel. Filter: TDD

hanged by Ericsson personnel. Filter: TDD

Ericsson personnel.Change takes effect: New connectionFilter: FDD

ect: New connectionFilter: FDD

he transmission gap pattern sequence in UE, DRNC or RBS.

ged by Ericsson personnel. Unit: sChange takes effect: New connections

ect ongoing traffic.

onnel.Unit: 0.1 dBFilter: TDDReplaces: tdDefaultInitDlTransPower

n: 5Change takes effect: ImmediatelyFilter: FDD

s attribute may only be changed by Ericsson personnel.

ons (next switch to CELL_DCH)Filter: FDD

ct: Ongoing connections (next switch to CELL_DCH)Filter: FDD

y measurements are started)Filter: FDD

nly be changed by Ericsson personnel. Filter: TDD

Change takes effect: New connections

owSize).This attribute may only be changed by Ericsson personnel.

pecification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod

sson personnel. Resolution: 4

onnel. Filter: TDDReplaces: tdDpchSlotFormat

pecification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod

this attribute and MO (but are nonetheless allowed to be set).

ll send STATUS reports

247: MaxRst =32

.. 550 ms with resolution 10600 ..1000ms with resolution 50Unit: ms

ce delivery shall not be used1: in-sequence delivery shall be used

4 PDU interval 7 128 PDU interval

8 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584 15:4095

:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584

tomatically and then re-enabled.Change takes effect: Object disabled/enabledUnit: 0.01

ect: New connections

e takes effect: Ongoing connections

ext switch to CELL_DCH)Filter: FDD

switch to CELL_DCH)Filter: FDD

E2: Event F3: Both (1&2)Filter: FDD