Edgestack Tech Spec

Fluence
Edgestack
TM
Connection-ready
commercial and industrial
energy storage system
designed to support
500+ kW applications
with rapid deployment
and minimum footprint.
About Edgestack Features

Edgestack is a complete, Connection Ready: Edgestack comes fully integrated with all the
connection-ready system used by batteries, inverters, safety features, cooling, and software controls
C&I customers to reduce monthly needed. Edgestack is quiet, emissions-free, occupies a small footprint,
electricity costs. and can be sited at nearly any C&I location.
Edgestack discharges when needed

to flatten a facility’s energy load Fleet Optimized: Configure Edgestack to meet your requirements
profile and significantly reduce then deploy across a fleet of facilities or customers. Edgestack’s
demand charges from the utility. modular system architecture drives efficiencies in project design and
The fully-integrated system is permitting for fast delivery and rapid installation, while consistency
available in 500 kW building blocks across project locations simplifies training, operations, and
that can be configured to meet the maintenance.
needs of individual facilities and
aggregated across fleets or Total System Safety: Edgestack comes equipped with
customer locations without comprehensive safety features throughout the integrated technology
time-consuming redesigns. stack. The factory-built design brings consistent quality control to your
Edgestack is built using our storage system for the highest level of safety.
6 generation technology stack,
th
which incorporates more than

12 years of design and
deployment experience.
Fluence Cube’s factory-built, modular form
factor is the building block for safe, cost-effective
systems configurable with the latest storage
Fluence Cube component technologies.
- Cost-effective systems with maximum quality control
is your building - Fast procurement and contracting process
block for better - Simple system design, engineering, and permitting

- Rapid delivery, construction, and commissioning
energy storage. - Latest safety features and storage components
Proprietary and confidential. Do not distribute. Information in this document is subject to change without notice.
Performance may vary depending on use, conditions, applications, and specific configuration.
Edgestack Specifications
TM
Edgestack System
Rated AC Power (50°C) 500 kW – 4 MW Availability >97.0%
Discharge Duration 1 – 4 hours Altitude De-rated over 1,000 meters
Grid Frequency 50Hz and 60Hz Seismic Rating Seismic options available
Reactive Power Four-quadrant control, 0.9 leading to 0.9 lagging at rated System Response Time Max capacity change in 1,000 ms
*
power (reactive capability available over full real power range)
***
Standard Temperature -30°C to 45°C
Auxiliary Power Usage MAX AUX LOAD: AVERAGE AUX LOAD: Range
7.6 kW (short duration) 1.5 - 3.0 kW (short duration)**
4.1 kW (long duration) 1.2 - 2.0 kW (long duration)**
Fluence Cube Fluence OS Fluence IQ

Cube Dimensions (H x W x D) Fully-integrated operating system for comprehensive Extensible digital intelligence
Long Duration: 2,549 x 2,578 x 2,160 mm control, asset management, and system visibility. improves system decision-
making, asset performance, and
Short Duration: 2,549 x 2,578 x 2,257 mm operating costs with data-driven
Operation Modes
insights and dispatch algorithms.
Cube Weight (total) lb/kg Automatic Resource Control, Manual Dispatch, Idle,
Long Duration: 18,320 / 8,328 Disconnect, Reset
Market Dispatch Algorithms
Short Duration: 19,020 / 8,646
System KPIs AGC, real and reactive power
dispatch, SOC management
Enclosure Rating Real and reactive power dispatch, state of charge, cell
voltage and temperature, auxiliary system details, core
NEMA Type 3R
and node status, fire system and E-Stop status, and more
Performance Reporting****
IP Rating System availability, states of
External Control Interface health, discharge cycles, and
IP55
SCADA and EMS integration available via common more
Cooling protocols including DNP3 and Native Modbus TCP/IP
Air or liquid cooled
Battery Chemistry
Advanced lithium ion sealed cells
Safety Features
Emergency shutdown, fire detection and
suppression system (solid aerosol), gas
detection (carbon monoxide), deflagration
panels, lockable disconnect switch, open door
sensor, gas spring damper, sliding door lock
Installation
Forkliftable from all 4 sides. Crane
compatible and includes vertical stabilization.
* Additional reactive capability upon request **Utilization and temperature dependent ***Can vary depending on cooling system, low temperature kits required below -10 degrees
****Available under Fluence Service Agreement
About Fluence
TM
Fluence, a Siemens and AES company, is the leading global energy storage technology solutions and services
company that combines the agility of a technology company with the expertise, vision, and financial backing of
two industry powerhouses. Building on the pioneering work of AES Energy Storage and Siemens energy storage,
Fluence’s goal is to create a more sustainable future by transforming the way we power our world. Fluence offers
proven energy storage technology solutions designed to address the diverse needs and challenges of customers
in a rapidly transforming energy landscape, providing design, delivery, and integration in over 160 countries.
© 2020 Fluence. All rights reserved.TS-008-03-EN

Edgestack Tech Spec

Uploaded by

Copyright:

Available Formats

Edgestack Tech Spec

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Edgestack Tech Spec

Uploaded by

Copyright:

Available Formats

Fluence

About Edgestack Features

Edgestack discharges when needed

which incorporates more than

block for better - Simple system design, engineering, and permitting

Discharge Duration 1 – 4 hours Altitude De-rated over 1,000 meters

Fluence Cube Fluence OS Fluence IQ

You might also like