Quick Reference: Intel Desktop Boards D850MD and D850MV

Intel® Desktop Boards
D850MD and D850MV

Quick Reference
This guide is written for technically qualified personnel with experience
installing and configuring desktop boards.
#FGPSF:PV#FHJO
Warning and Caution .......................................................................... 3
Safety and Regulatory Notice ............................................................. 3
%FTLUPQ#PBSE$PNQPOFOUT
D850MD Board Components ............................................................. 4
D850MV Board Components ............................................................. 6
4VQQPSUFE$PNQPOFOUT
Processors ........................................................................................... 8
Memory Module Requirements .......................................................... 8
*OTUBMMBUJPO4UFQT
1 Installing the I/O Shield............................................................... 9
2 Installing the Desktop Board ...................................................... 10
3 Installing the Processor Fan Heatsink Base ................................ 12
4 Installing the Processor............................................................... 14
5 Installing the Processor Fan Heatsink......................................... 14
6 Installing the Memory Modules.................................................. 15
7 Installing the AGP card Retention Mechanism........................... 16
8 Installing an AGP Card............................................................... 18
9 Connecting the Fans to the D850MD Board............................... 19
10 Connecting the Fans to the D850MV Board............................... 20
11 Attaching the IDE Cable............................................................. 21
4FUUJOHUIF#*04$POGJHVSBUJPO+VNQFS............................... 22
#*044FUVQ1SPHSBN%FGBVMUT.................................................... 23
®
*UFNTPOUIF*OUFM &YQSFTT*OTUBMMFS$%30.
x Product warranty
x Intel Express Installer
x Intel® Desktop Boards D850MD and D850MV Product Guide
x Software utilities and drivers
x Software license agreement
x Readme file
Part number: A57862-001

(FUUJOH)FMQ
View or download product support information from Intel’s World Wide Web
site: http://support.intel.com/support/motherboards/desktop
Documents on the Web site include:
x Intel® Desktop Board D850MD/D850MV Technical Product Specification
x Intel® Desktop Board D850MD/D850MV Specification Update
If you can’t find the information you need on the Web, contact your point of
purchase. The Intel World Wide Web site also includes telephone numbers and
billing charges, if applicable, for Intel customer support.
Information in this document is provided in connection with Intel® products. No

license, express or implied, by estoppel or otherwise, to any intellectual property
rights is granted by this document. Except as provided in Intel’s Terms and
Conditions of Sale for such products, Intel assumes no liability whatsoever, and
Intel disclaims any express or implied warranty, relating to sale and/or use of Intel
products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual
property right. Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.
The D850MD and D850MV desktop boards may contain design defects or errors
known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest
specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this
document, or other Intel literature, may be obtained from Intel Corporation by
going to the World Wide Web site at: http://www.intel.com or by calling
1-800-548-4725.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
† Other names and brands may be claimed as the property of others.
Copyright © 2001, Intel Corporation
*OUFM%FTLUPQ#PBSET%.%BOE%.72VJDL3FGFSFODF
#FGPSF:PV#FHJO
8BSOJOHBOE$BVUJPO
8"3/*/(
%JTDPOOFDUUIFCPBSEhTQPXFSTVQQMZGSPNJUTBDQPXFSTPVSDF
CFGPSFZPVDPOOFDUPSEJTDPOOFDUDBCMFT PSJOTUBMMPSSFNPWFBOZ
CPBSEDPNQPOFOUT'BJMVSFUPEPUIJTDBOSFTVMUJOQFSTPOBMJOKVSZPS
FRVJQNFOUEBNBHF4PNFDJSDVJUSZPOUIFEFTLUPQCPBSEDBO
DPOUJOVFUPPQFSBUFFWFOUIPVHIUIFGSPOUQBOFMQPXFSTXJUDIJTPGG
$"65*0/
&MFDUSPTUBUJDEJTDIBSHF &4%
DBOEBNBHFEFTLUPQCPBSEDPNQPOFOUT
*OTUBMMUIFCPBSEBUBO&4%DPOUSPMMFEXPSLTUBUJPO*GTVDIBXPSLTUBUJPO
JTOPUBWBJMBCMF XFBSBOBOUJTUBUJDXSJTUTUSBQPSUPVDIUIFTVSGBDFPGUIF
BOUJTUBUJDQBDLBHFCFGPSFIBOEMJOHUIFCPBSE
4BGFUZBOE3FHVMBUPSZ/PUJDF
See the Intel® Desktop Boards D850MD and D850MV Product Guide for all
applicable regulatory compliance statements, product certification markings, and
safety and electromagnetic compatibility (EMC) standards and regulations these
desktop boards are compliant with.
Replacement battery warning label provided: Place the label inside the chassis
in an easy-to-see location near the battery but not on the board itself.
Intended uses: This product was evaluated as information technology
equipment (I.T.E.) for home or office use when installed into an appropriate
computer chassis. Other end uses or locations may require further evaluation.
✏ /05&
5IF%.%CPBSEMBZPVUXBTVTFEGPSJMMVTUSBUJPOTVOMFTTPUIFSXJTF
OPUFE
%FTLUPQ#PBSE$PNQPOFOUT
%.%#PBSE$PNQPOFOUT
Line
In
USB USB
Devices Devices
A B CD E F
G
H
Z I
Y J
K
X
W
L
V
U
T Q O N M
S R P
1 2 Power LED
HD LED
Reset On
No Connection Ground
+5V
15 16
J8J1
OM11845
continued
%.%#PBSE $PNQPOFOUT (continued)
A ADI AD1885 audio codec N Diskette drive connector
B Auxiliary line-in connector (ATAPI) O Primary IDE connector
C AGP connector P Secondary IDE connector
D CD-ROM connector (ATAPI) Q Front panel USB connector
E Front panel audio connector R Alternate power/sleep LED
connector
F Chassis intrusion connector S Chassis fan connector (fan 2)
(tachometer input)
G 12 V processor core voltage T Battery
connector
H Processor fan connector U Speaker
(CPU fan) (tachometer input)
I Intel® 82850 Memory Controller V BIOS configuration jumper
Hub (MCH)
J Processor socket W SCSI hard drive activity LED
connector
K RIMM sockets X Intel® 82801BA I/O Controller
Hub (ICH2)
L RIMM fan connector (fan 1) Y PCI bus add-in card connectors
M Power connector Z Communication and Networking
Riser (CNR) (optional)
$"65*0/
.BOZPGUIFJOUFSOBMDPOOFDUPSTQSPWJEFPQFSBUJOHWPMUBHF 7EDBOE
7ED GPSFYBNQMF
UPEFWJDFTJOTJEFUIFDPNQVUFSDIBTTJT TVDIBT
GBOTBOEJOUFSOBMQFSJQIFSBMT5IFTFDPOOFDUPSTBSFOPUPWFSDVSSFOU
QSPUFDUFE%POPUVTFUIFTFDPOOFDUPSTGPSQPXFSJOHEFWJDFTFYUFSOBMUP
UIFDPNQVUFSDIBTTJT"GBVMUJOUIFMPBEQSFTFOUFECZUIFFYUFSOBM
EFWJDFTDPVMEDBVTFEBNBHFUPUIFDPNQVUFS UIFJOUFSDPOOFDUJOHDBCMFT
BOEUIFFYUFSOBMEFWJDFTUIFNTFMWFT
%.7#PBSE$PNQPOFOUT
Line
In
USB USB
Devices Devices
A B CD E F
G
AA
H
Z I
Y J
K
X
W
L
V
U
T Q O N M
S R P
1 2 Power LED
HD LED
Reset On
+5V
15 16
J8J1
OM12076
continued
%.7#PBSE$PNQPOFOUT (continued)
A ADI AD1885 audio codec O Primary IDE connector
B ATAPI auxiliary line-in connector P Secondary IDE connector
C AGP connector Q Front panel USB connector
D ATAPI CD-ROM connector R Alternate power/sleep LED
connector
E Front panel audio connector S Chassis fan connector (fan 2)
(tachometer input)
F Chassis intrusion connector T Battery
G 12 V processor core voltage U Speaker
connector
H Processor fan connector (CPU V BIOS configuration jumper
fan) (tachometer input)
I Intel 82850 Memory Controller W SCSI hard drive activity LED
Hub (MCH) connector
J Processor socket X Intel 82801BA I/O Controller
Hub (ICH2)
K RIMM sockets Y PCI bus add-in card connectors
L RIMM fan connector (fan 1) Z Communication and Networking
Riser (CNR) (optional)
M Power connector AA Chassis fan (fan 3)
N Diskette drive connector
$"65*0/
.BOZPGUIFJOUFSOBMDPOOFDUPSTQSPWJEFPQFSBUJOHWPMUBHF 7EDBOE
7ED GPSFYBNQMF
UPEFWJDFTJOTJEFUIFDPNQVUFSDIBTTJT TVDIBT
GBOTBOEJOUFSOBMQFSJQIFSBMT5IFTFDPOOFDUPSTBSFOPUPWFSDVSSFOU
QSPUFDUFE%POPUVTFUIFTFDPOOFDUPSTGPSQPXFSJOHEFWJDFTFYUFSOBMUP
UIFDPNQVUFSDIBTTJT"GBVMUJOUIFMPBEQSFTFOUFECZUIFFYUFSOBM
EFWJDFTDPVMEDBVTFEBNBHFUPUIFDPNQVUFS UIFJOUFSDPOOFDUJOHDBCMFT
BOEUIFFYUFSOBMEFWJDFTUIFNTFMWFT
4VQQPSUFE$PNQPOFOUT
1SPDFTTPST
$"65*0/
'BJMVSFUPVTFBO"597QPXFSTVQQMZ PSOPUDPOOFDUJOHUIFBEEJUJPOBM
QPXFSTVQQMZMFBEUPUIF%.%PS%.7CPBSENBZSFTVMUJO
EBNBHFUPUIFEFTLUPQCPBSE
'PSNPSFJOGPSNBUJPOPOUIF"597QPXFSTVQQMZ SFGFSUPUIF
Intel Desktop Boards D850MD and D850MV Product GuidePOUIF*OUFM

&YQSFTT*OTUBMMFS$%30.
The board supports the following processors:

5ZQF %FTJHOBUJPO 4ZTUFN#VT'SFRVFODZ
Intel®
Pentium 4 processor in 1.4, 1.5, 1.6, 1.7, 400 MHz
an mPGA-478 package and 1.8 GHz
For the latest information on processors supported by the D850MD and
D850MV boards, refer to the Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
.FNPSZ.PEVMF3FRVJSFNFOUT
The board has four 2.5 V memory module sockets that support RIMMs
containing Direct Rambus DRAM (RDRAM) devices.
The board supports the following memory features:
x Maximum of 32 RDRAM devices per channel
x Memory configurations from 128 MB (minimum) to 2 GB (maximum)
using 128/144 Mbit or 256/288 Mbit technology
x PC600 or PC800 compliant RDRAM
x Single or double-sided RIMM modules
x Serial Presence Detect (SPD) memory only
x ECC and non-ECC support
✏ /05&
'PSJOGPSNBUJPOBCPVUWFOEPSTUIBUTVQQPSUUIFTFNFNPSZSFRVJSFNFOUT
SFGFSUPUIF%.%PS%.7MJOLPOUIJT*OUFM8PSME8JEF8FCTJUF
*OTUBMMBUJPO4UFQT
*OTUBMMJOHUIF*04IJFME
The board comes with an I/O shield. When installed in the chassis, the shield
blocks radio frequency transmissions, necessary to pass emissions (EMI)
certification testing, protects internal components from dust and foreign objects,
and promotes correct airflow within the chassis.
Install the I/O shield before installing the board in the chassis. Place the shield
inside the chassis as shown in the following figure. Press the shield into place
so that it fits tightly and securely. If the shield doesn’t fit, obtain a properly
sized shield from the chassis supplier.
OM12116
*OTUBMMJOHUIF%FTLUPQ#PBSE
$"65*0/
'BJMVSFUPVTFBO"597QPXFSTVQQMZ PSOPUDPOOFDUJOHUIFBEEJUJPOBM
QPXFSTVQQMZMFBEUPUIF%.7PS%.%CPBSENBZSFTVMUJO
EBNBHFUPUIFEFTLUPQCPBSE
'PSNPSFJOGPSNBUJPOPOUIF"597QPXFSTVQQMZ SFGFSUPUIF

&YQSFTT*OTUBMMFS$%30.
Refer to your chassis manual for specific instructions on installing and removing
the board. The D850MD board is secured to the chassis by eight screws and the
D850MV board by 11 screws. See the two illustrations below for mounting
hole locations of the two boards.
OM11831
%.%#PBSE.PVOUJOH)PMFT
OM12178
%.7#PBSE.PVOUJOH)PMFT
*OTUBMMJOHUIF1SPDFTTPS'BO)FBUTJOL#BTF
✏ /05&
5IFGPMMPXJOHBTTFNCMZPQFSBUJPOTIPVMECFQFSGPSNFEBGUFSUIFEFTLUPQ
CPBSEJTTFDVSFEJOUIFDIBTTJT
The desktop board comes with a processor fan heatsink base. Follow the
instructions below to install the base to the board.
1 Observe the precautions in “Before You Begin” on page 3.
2 The processor fan heatsink base is secured to the board with four pushpins.
See the location of the processor fan heatsink base holes in the following
figure.
OM12079
3 Align the four fasteners (B) of the processor fan heatsink RM base with the
corresponding holes in the desktop board (C). Gently press the base down
until all four corners snap into place. Verify that all four fasteners are fully
engaged, then press down each of the four locking pushpins (A) to fully
secure the base to the desktop board.
OM12177
*OTUBMMJOHUIF1SPDFTTPS
2 Lift the processor socket lever.
3 Install the processor so that the corner with the triangle marking (A) is
aligned with the corner where the lever is attached to the socket.
4 Lower the lever back to its original position.
mP mP mP
GA GA GA
47 47 47
8B 8B 8B
OM12078
*OTUBMMJOHUIF1SPDFTTPS'BO)FBUTJOL
For instructions on how to install the processor fan heatsink, refer to the boxed
processor manual or the Intel World Wide Web site at:
*OTUBMMJOHUIF.FNPSZ.PEVMFT
$"65*0/4
*OTUBMMB$POUJOVJUZ3*.. $3*..
JOFBDIVOVTFENFNPSZTPDLFUPSUIF
CPBSEXJMMOPUCPPU
)JHIJOTFSUJPOGPSDFNBZCFSFRVJSFEUPJOTUBMMUIF3*..TBOE$3*..T
6TFDBVUJPOXIFOJOTFSUJOHUIF3*..TBOE$3*..TUPQSFWFOUUIFCPBSE
GSPNGMFYJOH
Install RIMMs into bank 0 first. If the desired memory configuration has been
achieved, insert CRIMMs into bank 1.
If memory is to be installed in bank 1, the RIMM modules to be installed must
be identical in size and density to each other, and match the speed of the RIMM
modules in bank 0. For example, if bank 0 has two 128 MB RIMMs of
PC800 RDRAM, bank 1 would require PC800 RDRAM also, however, any
other supported RIMM modules such as 64 MB or 128 MB could be used.
OM11832
*OTUBMMJOHUIF"(1DBSE3FUFOUJPO.FDIBOJTN
$"65*0/
*OTUBMMUIF"(1DBSESFUFOUJPONFDIBOJTN 3.
POMZXIFOVTJOHBO
"(1 DBSEXJUIBSFUFOUJPOOPUDI "

BTTIPXOJOUIFGJHVSFCFMPX6TJOH
UIF"(13.XJUIBOVOOPUDIFEDBSENBZJNQBJSWJEFPPQFSBUJPO4FFUIF

&YQSFTT*OTUBMMFS$%30.GPS"(13.SFNPWBMJOTUSVDUJPOT
✏ /05&
"MM%.%BOE%.7CPYFEEFTLUPQCPBSETNBZOPUJODMVEFBO"(1
3.4LJQUPUIF*OTUBMMJOHBO"(1$BSEIFBEJOHPOQBHFJGZPVSCPYFE
EFTLUPQCPBSEEPFTOPUJODMVEFBO"(13.
A
OM10592
The RM encloses the board’s AGP connector and stabilizes the AGP card.
Place the board (component side up) on a flat, supportive surface.
Follow the steps outlined below to attach the AGP RM (A) to the AGP
connector (B):
1 Locate the AGP connector on the board as shown below. Note that the
board’s silkscreen (C) indicates the correct final position of the lever
(D) on the RM.
C B
OM11842
2 Position the AGP RM over the AGP connector as shown below.
OM10111
3 Push the lever end of the AGP RM in the direction of the arrow until the
two rearmost tabs (E) spread over the end of the AGP connector.
OM10180
4 Push the free end of the AGP RM over the other end of the AGP connector
and press down evenly on both ends of the AGP RM until all four tabs
click underneath the AGP connector. Do not apply unnecessary pressure to
avoid damaging the board.
OM10181
*OTUBMMJOHBO"(1$BSE
✏ /05&4
5IF%.%BOE%.7CPBSETBSFPOMZDPNQBUJCMFXJUI7"(1
DBSET
Follow these instructions to install an AGP card if it has a retention notch.

1 Observe the precautions in “Before You Begin” on 3.
2 Place the AGP card in the AGP connector.
3 Press down on the card until it is completely seated in the connector and
the card retention notch snaps into place below the RM.
4 Secure the card’s metal bracket to the chassis back panel with a screw.
$POOFDUJOHUIF'BOTUPUIF%.%#PBSE
The following figure shows the location of the fan connectors for the D850MD
board. Connect the processor’s fan heatsink cable to the processor fan
connector on the board. Connect the chassis fan cables to the board connectors
as shown in the figure below. The processor fan and fan 2 can be monitored via
the Intel® Active Monitor software application.
Processor Fan
3
Fan 1
3 1
Fan 2
1 3
OM11844
%.%#PBSE'BO$POOFDUPST
$POOFDUJOHUIF'BOTUPUIF%.7#PBSE
The following figure shows the location of the fan connectors for the D850MV
board. Connect the processor’s fan heatsink cable to the processor fan
connector on the board. Connect the chassis fan cables to the board connectors
as shown in the figure below. The processor fan and fan 2 can be monitored via
the Intel Active Monitor software application.
Fan 3
3 1
Processor Fan
3
Fan 1
3 1
Fan 2
1 3
OM12075
%.7#PBSE'BO$POOFDUPST
"UUBDIJOHUIF*%&$BCMF
The Intel® boxed desktop board package includes two IDE cables. Either cable
can connect two drives to the desktop board. The cables support the Ultra
DMA-33 (40-contact) or ATA-66/100 (40-contact, 80-conductor) transfer
protocols and are backward compatible with drives using slower IDE transfer
protocols.
The cable will work correctly only when oriented as shown in the figure below.
For correct cable function:
2 Attach the cable end with the single connector (A) to the board.
3 Attach the cable end with the two closely spaced connectors (B) to the
drives.
B A
OM11835
4FUUJOHUIF#*04$POGJHVSBUJPO+VNQFS
$"65*0/
"MXBZTUVSOPGGUIFQPXFSBOEVOQMVHUIFQPXFSDPSEGSPNUIFDPNQVUFS
CFGPSFDIBOHJOHUIFKVNQFS.PWJOHUIFKVNQFSXJUIUIFQPXFSPONBZ
SFTVMUJOVOSFMJBCMFDPNQVUFSPQFSBUJPO
3
J9H2
OM11836
The BIOS configuration jumper (J9H2) determines the operating mode of the
BIOS Setup Program and enables BIOS recovery in the event of a failed
BIOS update. The following table describes the jumper settings for the BIOS
Setup configuration jumper.
#*044FUVQ$POGJHVSBUJPO+VNQFS4FUUJOHT
+VNQFS
1PTJUJPO .PEF %FTDSJQUJPO
1 Normal The BIOS uses the current configuration and

(default) passwords for booting.
3
1 Configure After the Power-On Self-Test (POST) runs, the

BIOS displays the Maintenance Menu. Use this
3 menu to clear passwords.
1 Recovery The BIOS recovers data from a recovery diskette
in the event of a failed BIOS update. To update or
3 recover the BIOS, see the instructions in the*OUFM
%FTLUPQ#PBSET%.%BOE%.71SPEVDU
(VJEF on the Intel Express Installer CD-ROM.
#*044FUVQ1SPHSBN%FGBVMUT
To disable the audio interface, select the Peripheral Configuration Submenu

under the Advanced Menu, then set Audio Device to “Disabled.”
To disable the LAN interface, select the Peripheral Configuration Submenu
under the Advanced Menu, then set LAN Device to “Disabled.”
You can find a complete list of the latest BIOS Setup settings in the Intel
Desktop Boards D850MD and D850MV Product Guide or on the Intel World
Wide Web site at:
Intel®
D850MD D850MV

................................................................................ 3
................................................................................ 3
D850MD .................................................................... 4
D850MV .................................................................... 6
................................................................................................ 8
.................................................................................... 8
1 I/O ........................................................................... 9
2 ............................................................................. 10
3 .......................................................... 12
4 ................................................................................. 14
5 .............................................................. 14
6 ............................................................................. 15
7 AGP .................................................................... 16
8 AGP ............................................................................... 18
9 D850MD ................................................ 19
10 D850MV ................................................ 20
11 IDE ............................................................................. 21
BIOS ........................................................................... 22
BIOS Setup .............................................. 23
Intel® Express Installer

x
x Intel Express Installer
x Intel® D850MD D850MV
x
x
x

Intel

x Intel® D850MD/D850MV
x Intel® D850MD/D850MV
Intel
Intel

Intel®
Intel
Intel
Intel Intel
Intel Intel
D850MD D850MV
Intel
Intel Intel Corporation

http://www.intel.com 1-800-548-4725
Intel Pentium Intel Corporation
†
Copyright © 2001, Intel Corporation
2 Intel D850MD D850MV

(ESD) ESD
ESD
(EMC) Intel®
D850MD D850MV

(I.T.E.)
✏
D850MD
Intel D850MD D850MV 3

D850MD
Line
In
USB USB
Devices Devices
A B CD E F
G
H
Z I
Y J
K
X
W
L
V
U
T Q O N M
S R P
1 2 Power LED
HD LED
Reset On
+5V
15 16
J8J1
OM11845

D850MD
A ADI AD1885 N
B (ATAPI) O IDE
C AGP P IDE
D CD-ROM (ATAPI) Q USB
E R LED
F S 2
G 12 V T
H U
CPU
I Intel® 82850 V BIOS
(MCH)
J W SCSI LED
K RIMM X Intel® 82801BA I/O

(ICH2)
L RIMM 1 Y PCI
M Z (CNR)

+5 VDC +12 VDC

D850MV
Line
In
USB USB
Devices Devices
A B CD E F
G
AA
H
Z I
Y J
K
X
W
L
V
U
T Q O N M
S R P
1 2 Power LED
HD LED
Reset On
+5V
15 16
J8J1
OM12076

D850MV
A ADI AD1885 O IDE
B ATAPI P IDE
C AGP Q USB
D ATAPI CD-ROM R LED
E S 2
F T
G 12 V U
H V BIOS
CPU
I Intel 82850 W SCSI LED
(MCH)
J X Intel 82801BA I/O
(ICH2)
K RIMM Y PCI
L RIMM 1 Z (CNR)
M AA 3
N

+5 VDC +12 VDC

ATX12V D850MD D850MV
ATX12V Intel Express Installer

Intel D850MD D850MV
Intel® Pentium 4 1.4 GHz, 1.5GHz, 400 MHz

mPGA-478 1.6 GHz, 1.7 GHz
1.8 GHz
D850MD D850MV
Intel

2.5 V Direct Rambus DRAM
(RDRAM) RIMM
x 32 DRAM
x 128/144 Mbit 256/288 Mbit
128 MB 2 GB
x PC600 PC800 RDRAM
x RIMM
x (SPD)
x ECC ECC
✏
Intel
D850MD D850MV

1 I/O
I/O
(EMI)
I/O
OM12116

2

ATX12V D850MV D850MD
ATX12V Intel Express Installer

Intel D850MD D850MV
D850MD
8 D850MV 11
OM11831
D850MD

OM12178
D850MV

3
✏

1 3
2 4

OM12079

3 RM 4 (B)
(C)
4 4
(A)
OM12177

4
1 3
3 (A)
4
mP mP mP
GA GA GA
478 47 478
B 8B B
OM12078
Intel

6

RIMM (CRIMM)
RIMM CRIMM
RIMM CRIMM

RIMM Bank 0 CRIMM
Bank 1
Bank 1
RIMM Bank 0 RIMM
Bank 0 128 MB RIMM PC800 RDRAM
Bank 1 PC800 RDRAM
RIMM 64 MB 128 MB
OM11832

7 AGP

(A) AGP
AGP (RM) AGP
AGP Intel Express Installer
Intel D850MD D850MV
✏
D850MD D850MV AGP
AGP 18
AGP
A
OM10592
AGP

AGP (RM) (A) AGP (B)
1 AGP
(C) (D)
C B
OM11842
2 AGP (RM) AGP
OM10111

3 AGP
(E) AGP
OM10180
4 AGP AGP AGP

AGP
OM10181

8 AGP
✏
D850MD D850MV 1.5 V AGP
AGP
1 3
2 AGP AGP
4

9 D850MD
D850MD
Intel® Active Monitor

2
Processor Fan
3
Fan 1
3 1
Fan 2
1 3
OM11844
D850MD


10 D850MV
D850MV
Intel Active Monitor

2
Fan 3
3 1
Processor Fan
3
Fan 1
3 1
Fan 2
1 3
OM12075
D850MV

11 IDE
Intel® IDE
40 Ultra DMA-33 40 80
ATA-66 ATA-100 IDE
1 3
2 (A)
3 (B)
B A
OM11835

BIOS

3
J9H2
OM11836

BIOS (J9H2) BIOS Setup
BIOS BIOS BIOS Setup

BIOS Setup
1 BIOS
3
1 (POST) BIOS Maintenance

3
1 BIOS BIOS
BIOS BIOS
3
Intel Express Installer
Intel D850MD
D850MV
BIOS Setup
Advanced Menu Peripheral
Configuration Submenu Audio Device
“Disabled”
LAN Advanced Menu Peripheral
Configuration Submenu LAN Device
LAN “Disabled”
BIOS Setup Intel
D850MD D850MV Intel


Quick Reference: Intel Desktop Boards D850MD and D850MV

Uploaded by

Copyright:

Available Formats

Quick Reference: Intel Desktop Boards D850MD and D850MV

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Quick Reference: Intel Desktop Boards D850MD and D850MV

Uploaded by

Copyright:

Available Formats

Intel® Desktop Boards

D850MD and D850MV

Part number: A57862-001

Information in this document is provided in connection with Intel® products. No

Copyright © 2001, Intel Corporation

Intel Desktop Boards D850MD and D850MV Product GuidePOUIF*OUFM

The board supports the following processors:

Intel Desktop Boards D850MD and D850MV Product GuidePOUIF*OUFM

1 Observe the precautions in “Before You Begin” on page 3.

2 Lift the processor socket lever.

4 Lower the lever back to its original position.

"(1 DBSEXJUIBSFUFOUJPOOPUDI "

Intel Desktop Boards D850MD and D850MV Product GuidePOUIF*OUFM

2 Position the AGP RM over the AGP connector as shown below.

Follow these instructions to install an AGP card if it has a retention notch.

2 Place the AGP card in the AGP connector.

1PTJUJPO .PEF %FTDSJQUJPO

1 Normal The BIOS uses the current configuration and

1 Configure After the Power-On Self-Test (POST) runs, the

(VJEF on the Intel Express Installer CD-ROM.

To disable the audio interface, select the Peripheral Configuration Submenu

BIOS Setup .............................................. 23

Intel® Express Installer

Intel Intel Corporation

2 Intel D850MD D850MV

Intel D850MD D850MV 3

4 Intel D850MD D850MV

K RIMM X Intel® 82801BA I/O

+5 VDC +12 VDC

Intel D850MD D850MV 5

6 Intel D850MD D850MV

+5 VDC +12 VDC

Intel D850MD D850MV 7

ATX12V Intel Express Installer

Intel® Pentium 4 1.4 GHz, 1.5GHz, 400 MHz

8 Intel D850MD D850MV

Intel D850MD D850MV 9

ATX12V Intel Express Installer

10 Intel D850MD D850MV

Intel D850MD D850MV 11

12 Intel D850MD D850MV

Intel D850MD D850MV 13

14 Intel D850MD D850MV

Intel D850MD D850MV 15

16 Intel D850MD D850MV

2 AGP (RM) AGP

4 AGP AGP AGP

Intel D850MD D850MV 17

18 Intel D850MD D850MV

Intel® Active Monitor

Intel D850MD D850MV 19

Intel Active Monitor

20 Intel D850MD D850MV

Intel D850MD D850MV 21

22 Intel D850MD D850MV

1 (POST) BIOS Maintenance

Intel D850MD D850MV 23

24 Intel D850MD D850MV

You might also like