Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

T E W G S AVR: Starter Kit and Development System

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MICROCONTROLLERS

STK500 Starter Kit


and
THE EASIEST WAY TO GET STARTED WITH AVR Development
System
The Atmel® AVR STK500 is a starter kit and development system for Atmel’s AVR®
Flash microcontrollers. The STK500 gives designers a quick start to develop
code on the AVR, combined
with features for developing
prototypes and testing new
designs. The STK500 interfaces
AVR Studio®, Atmel’s Integrated
Development Environment
(IDE) for code writing and
debugging.

O AVR Studio Operated O LEDs and Push Buttons for


Experimentation
O Serial In-System Programming
O All AVR I/O Ports Easily Accessible
O In-System Programming in External
through Pin Header Connectors
Target Systems
O Spare RS-232 Driver and Connector
O Parallel and Serial High-voltage
Programming O Upgrades are done from AVR Studio
O RS-232 Interface to PC O Expansion Connectors for Plug-in
Modules and Prototype Areas
O Sockets for 8-, 20-, 28-, and 40-pin
AVR Devices O Target Voltage 1.8 – 6.0V
O Flexible Clocking, Voltage and Reset O Supply Voltage 9 – 12V
System
STK500 S TA RT E R K I T AND DEVELOPMENT SYSTEM

Corporate Headquarters The STK500 is a complete starter kit, programming tool and development system
2325 Orchard Parkway
San Jose, CA 95131 for Atmel’s AVR microcontrollers. The STK500 gives AVR users the freedom to
USA
TEL: (1)(408) 441-0311 develop and test complete AVR designs and prototypes.
FAX: (1)(408) 487-2600

Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80 The STK500 supports all Programming modes of all AVR microcontrollers in the sockets as well as
CH-1705 Fribourg ISP Programming of external target systems. The AVR I/O ports are accessible on pin headers that
Switzerland
TEL: (41) 26-426-5555 can be used for connecting the on-board LEDs and push buttons, or external signals. The extra
FAX: (41) 26-426-5500
RS-232 port can be connected to any of the I/O pins.
Asia
Room 1219 The STK500 Programming interface is integrated in
Chinachem Golden Plaza
77 Mody Road Tsimshatsui AVR Studio. The Flash, EEPROM, and all Fuse and
East Kowloon Lock Bit options can be programmed individually or
Hong Kong
TEL: (852) 2721-9778 with the sequential automatic programming option.
FAX: (852) 2722-1369 The AVR clock frequency and supply voltage can also
Japan be controlled from AVR Studio.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
A DOS Programming software is included for efficient
Chuo-ku, Tokyo 104-0033
Japan batch programming in a production environment.
TEL: (81) 3-3523-3551
FAX: (81) 3-3523-7581 The active simulator or emulator code in AVR Studio
e-mail can easily be programmed into the STK500 with one
literature@atmel.com
click of the mouse.
Web Site
http://www.atmel.com

Supported Devices(4)
ATtiny11 AT90S2323 ATmega8 ATmega323
ATtiny12 AT90S2333 ATmega8515 ATmega32
ATtiny15 AT90S2343 ATmega8535 ATmega64(1)
ATtiny22 AT90S4414 ATmega161 ATmega103(1)
ATtiny26 AT90S4433 ATmega162 ATmega128(1)
ATtiny28 AT90S4434 ATmega163 AT89951(3)
AT90S1200 AT90S8515 ATmega16 AT89952(3)
AT90S2313 AT90S8535 ATmega169(2) AT86RF401(3)
©Atmel Corporation, 2002
Atmel Corporation makes no warranty for
the use of its products, other than those Notes 1: The device is supported through ISP Programming of external target or through the STK501 expansion module.
expressly contained in the Company’s 2: The device is supported through ISP Programming of external target or through the STK502 expansion module.
standard warranty which is detailed in
Atmel’s Terms and Conditions located on
3: The device is supported through ISP Programming of external target.
the Company’s web site. The Company 4: Low power versions are also supported.
assumes no responsibility for any errors
which may appear in this document,
reserves the right to change devices or
specifications detailed herein at any time
without notice, and does not make any
commitment to update the information
contained herein. No licenses to patents or
Ordering Information
other intellectual property of Atmel are
granted by the Company in connection The STK500 is available from Atmel franchised distributors.
with the sale of Atmel products, expressly
or by implication. Atmel’s products are not The ordering code is ATSTK500
authorized for use as critical components
in life support devices or systems. The latest version of AVR Studio is available free of charge from the Atmel web site: www.atmel.com
Atmel®, AVR® and AVR Studio® are regis-
tered trademarks of Atmel.
Other terms and product names may be
the trademarks of others.

1939C-AVR-09/02/15M

You might also like