The Most Complete and Innovative Range To Automate Sliding Gates

Nice Run 2500I
The most complete and innovative

range to automate sliding gates.
Run 2500I
For the automation of sliding Perfect movement: in the automation Simple to install: the BlueBUS system
deceleration phase, the inverter, which enables connections by means of just two
gates up to 2500 kg, dialogues with the control unit, increases wires between the control unit and up to 15
with Nice BlueBUS technology the torque, thus improving performance control safety and signalling devices.
and built-in inverter, and reducing the risk of the automation
blocking on impact with obstacles. Thanks to the advanced temperature
to guarantee precise The acceleration settings (at the start of the sensor, Run is able to manage force,
speed control. manoeuvre) and the deceleration settings adapting it to the different climatic
Self-ventilated motor (at the end of the manoeuvre) are precise and environmental conditions,
and reliable. while adapting the thermal cut-out protection
with electromechanical and intensity of self-ventilation, depending
limit switches. The built-in control unit on the temperature reading.
Suitable for use in extreme automatically adjusts the manoeuvre
speed on the basis of the gate weight A master/slave selection also
conditions, in systems (calculated by measuring the force automatically synchronises 2 motors,
for industrial applications required for the movement), simplifying enabling the automation of sliding gates
designed for intensive use. the operations for checking and ensuring with two opposing leafs.
compliance of the automation with standards
Practical and functional: the control unit
The inverter enables power supply and and inverter, housed inside Run, can be
activation of the 3-phase motor with single simply connected by means of the practical
phase 230 Vac current. It also enables variation connector guide.
of the automation speed by simply adjusting
the frequency, settable from a minimum Very quiet: gear motor on bearings
of 8.2 m/min to a maximum of 15.4 m/min,
to optimise the work load and system
performance.
Compartment for control

unit and inverter,
protected by
a removable box
Base and release device in

die-cast aluminium with
epoxy paint finish
Code Description
RUN2500I irreversible, 230 Vac, with built-in control unit and inverter, electromechanical limit switches, for gates up to 2500 kg
Technical specifications RUN2500I

Power (Vac) 230
Max. powered absorbed (VA) 650
Current absorbed (line) (A) 2.8
Protection level (IP) 44
Torque (Nm) 25
Max. thrust (N) 1670
Max. torque (Nm) 60
Speed (m/min. Min/Max) 8.2 ÷ 15.4
Max. gate weight (kg) 2500
Working temp. (C° Min/Max) -20 ÷ +50
Insulation class 1
Work cycle max. (Cycle/h) 28
Dimensions (mm) 400x387x253
Weight (kg) 25
Example of general setup with safety
1
3
1. Run 2. Transmitter 3. Photocells mounted

on posts 4. Photocells 5. Flashing light
2 6. Digital or key switches 7. O-View* multifunction
7 display.
*Optional connection to Opera system.
Optional Accessories
RUA2 RUA3 MOTXR F210B & FA1 ON2 ABF

Spare control unit Spare inverter Wireless keypad Photo safety beam Transmitter 433.92 MHz Tuned 433.92MHz
vandal resistant cover 2 channel aerial
OXI MLBT MOSE MOCF OX2 GO

Plug-in receiver Flashing indicator light Key selector switch Aluminium post for Pre-wired receiver card Shockproof cover for
for outdoor installation photo cells & key switch for control of Garage NiceWay transmitters
doors and external devices
Opera system
The innovative Opera

system enables
the installer to manage,
program and control
automation systems,
also remotely, simply
and safely, with significant
savings in time. O-View programmer display
O-View programmer is used by the installer
to advance features and fine tune motor functions.
Certified quality.
Safety, quality, reliability and durability
are priorities for Nice. All Nice Products
in fact comply with the provisions
of the European Directives
governing construction.
Service
Dealers who offer Nice products to their
customers believe in the value of quality;
providing service that satisfies all the needs
and wishes of customers, before and after
sales, is a duty. Contact a Nice specialist
with complete trust!
Brisbane Automatic Gate Systems

Unit 10, 7-9 Grant Street
CLEVELAND, QLD 4163
Ph: 07 3286 8111
Fax: 07 3286 8113
Email : info@brisbaneautomaticgates.com.au
www.brisbaneautomaticgates.com.au

The Most Complete and Innovative Range To Automate Sliding Gates

Uploaded by

Copyright:

Available Formats

The Most Complete and Innovative Range To Automate Sliding Gates

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Most Complete and Innovative Range To Automate Sliding Gates

Uploaded by

Copyright:

Available Formats

Nice Run 2500I

The most complete and innovative

Compartment for control

Base and release device in

Technical specifications RUN2500I

1. Run 2. Transmitter 3. Photocells mounted

RUA2 RUA3 MOTXR F210B & FA1 ON2 ABF

OXI MLBT MOSE MOCF OX2 GO

The innovative Opera

Brisbane Automatic Gate Systems

You might also like