Conforms to Regulation (EC) No.

1907/2006 (REACH), Annex II

HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier
Product name : HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50
GLOSS
Product code : AT4850/13

1.2 Relevant identified uses of the substance or mixture and uses advised against
Material uses : Paint or paint related material.
: Industrial use only.

1.3 Details of the supplier of the safety data

sheet
SHERWIN-WILLIAMS Italy S.r.l.
Via del Fiffo, 12 - 40065 Pianoro (BO)
Italia - C.P. 18
Cod. Fisc. e Reg. Impr. Bo 08866930152
e-mail address of person : regulatory.SWI@sherwin.com
responsible for this SDS

1.4 Emergency telephone number

National advisory body/Poison Centre
Telephone number : +353 1 809 2166
Supplier
Telephone number : +39 051 770511
Hours of operation : Emergency contact available 24 hours a day

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
The product is not classified as hazardous according to Regulation (EC) 1272/2008 as amended.
See Section 16 for the full text of the H statements declared above.
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Signal word : No signal word.
Hazard statements : No known significant effects or critical hazards.
Precautionary statements
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Not applicable.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 1/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 2: Hazards identification

Supplemental label : Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of: 5-chloro-2-methyl-
elements 4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no.
220-239-6] (3:1). May produce an allergic reaction. Safety data sheet available on
request.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Not applicable.

2.3 Other hazards

Other hazards which do : None known.
not result in classification

SECTION 3: Composition/information on ingredients

3.2 Mixture :

Classification
Product/ingredient Identifiers % Regulation (EC) No. 1272/2008 [CLP] Type
name
2-Butoxyethanol REACH #: ≤3 Acute Tox. 4, H302 [1] [2]
01-2119475108-36 Acute Tox. 4, H312
EC: 203-905-0 Acute Tox. 4, H332
CAS: 111-76-2 Skin Irrit. 2, H315
Index: 603-014-00-0 Eye Irrit. 2, H319
2-(2-Butoxyethoxy)- REACH #: ≤2.9 Eye Irrit. 2, H319 [1] [2]
ethanol 01-2119475104-44
EC: 203-961-6
CAS: 112-34-5
Index: 603-096-00-8
See Section 16 for the full text of the H
statements declared above.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been
assigned a workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
Occupational exposure limits, if available, are listed in Section 8.
SECTION 4: First aid measures
4.1 Description of first aid measures
General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and seek medical advice.
Eye contact : Remove contact lenses, irrigate copiously with clean, fresh water, holding the
eyelids apart for at least 10 minutes and seek immediate medical advice.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 2/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 4: First aid measures

Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognised skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show the container or label.
Keep person warm and at rest. Do NOT induce vomiting.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.

4.2 Most important symptoms and effects, both acute and delayed
There are no data available on the mixture itself. Procedure used to derive the classification according to Regulation
(EC) No. 1272/2008 [CLP/GHS]. See Sections 2 and 3 for details.

Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular
weakness, drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with
the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.

See toxicological information (Section 11)

SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing : Recommended: alcohol-resistant foam, carbon dioxide, powders.
media
Unsuitable extinguishing : Do not use water jet.
media

5.2 Special hazards arising from the substance or mixture

Hazards from the : Fire will produce dense black smoke. Exposure to decomposition products may
substance or mixture cause a health hazard.
Hazardous thermal : Decomposition products may include the following materials: carbon monoxide,
decomposition products carbon dioxide, smoke, oxides of nitrogen.

5.3 Advice for firefighters

Special protective actions : Cool closed containers exposed to fire with water. Do not release runoff from fire to
for fire-fighters drains or watercourses.
Special protective : Fire-fighters should wear positive pressure self-contained breathing apparatus
equipment for fire-fighters (SCBA) and full turnout gear.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 3/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 6: Accidental release measures

Due to the organic solvents content of the mixture:
6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : Exclude sources of ignition and ventilate the area. Avoid breathing vapour or mist.
personnel Refer to protective measures listed in sections 7 and 8.
Keep unnecessary and unprotected personnel from entering.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

6.2 Environmental : Do not allow to enter drains or watercourses. If the product contaminates lakes,
precautions rivers, or sewers, inform the appropriate authorities in accordance with local
regulations.

6.3 Methods and material : Contain and collect spillage with non-combustible, absorbent material e.g. sand,
for containment and earth, vermiculite or diatomaceous earth and place in container for disposal
cleaning up according to local regulations (see Section 13). Preferably clean with a detergent.
Avoid using solvents.
6.4 Reference to other : See Section 1 for emergency contact information.
sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
SECTION 7: Handling and storage
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe : Due to the organic solvents content of the mixture:
handling
Prevent the creation of flammable or explosive concentrations of vapours in air and
avoid vapour concentrations higher than the occupational exposure limits.
In addition, the product should only be used in areas from which all naked lights and
other sources of ignition have been excluded. Electrical equipment should be
protected to the appropriate standard.
Keep away from heat, sparks and flame. No sparking tools should be used.
Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or
mist arising from the application of this mixture. Avoid inhalation of dust from
sanding.
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed.
Put on appropriate personal protective equipment (see Section 8).
Never use pressure to empty. Container is not a pressure vessel.
Always keep in containers made from the same material as the original one.
Comply with the health and safety at work laws.
Information on fire and explosion protection
Vapours are heavier than air and may spread along floors. Vapours may form
explosive mixtures with air.

When operators, whether spraying or not, have to work inside the spray booth,
ventilation is unlikely to be sufficient to control particulates and solvent vapour in all
cases. In such circumstances they should wear a compressed air-fed respirator
during the spraying process and until such time as the particulates and solvent
vapour concentration has fallen below the exposure limits.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 4/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 7: Handling and storage

7.2 Conditions for safe : Store in accordance with local regulations.
storage, including any Notes on joint storage
incompatibilities Keep away from: oxidising agents, strong alkalis, strong acids.
Additional information on storage conditions
Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away
from heat and direct sunlight.
Keep container tightly closed.
Keep away from sources of ignition. No smoking. Prevent unauthorised access.
Containers that have been opened must be carefully resealed and kept upright to
prevent leakage.
Contaminated absorbent material may pose the same hazard as the spilt product.
Store above 5°C (42℉) Protect from frost.

7.3 Specific end use(s)

Recommendations : Not available.
Industrial sector specific : Not available.
solutions
Good housekeeping standards, regular safe removal of waste materials and regular maintenance of spray booth
filters will minimise the risks of spontaneous combustion and other fire hazards.
Before use of this material please refer to the Exposure Scenario(s) if attached for the specific end use,
control measures and additional PPE considerations.
SECTION 8: Exposure controls/personal protection
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
8.1 Control parameters
Occupational exposure limits
Product/ingredient name Exposure limit values

2-Butoxyethanol NAOSH (Ireland, 12/2011). Absorbed through skin.

OELV-8hr: 20 ppm 8 hours.
OELV-8hr: 98 mg/m³ 8 hours.
OELV-15min: 50 ppm 15 minutes.
OELV-15min: 246 mg/m³ 15 minutes.
2-(2-Butoxyethoxy)-ethanol NAOSH (Ireland, 12/2011).
OELV-8hr: 10 ppm 8 hours.
OELV-15min: 101.2 mg/m³ 15 minutes.
OELV-8hr: 67.5 mg/m³ 8 hours.
OELV-15min: 15 ppm 15 minutes.

Recommended monitoring : If this product contains ingredients with exposure limits, personal, workplace
procedures atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to monitoring standards, such as
the following: European Standard EN 689 (Workplace atmospheres - Guidance for
the assessment of exposure by inhalation to chemical agents for comparison with
limit values and measurement strategy) European Standard EN 14042 (Workplace
atmospheres - Guide for the application and use of procedures for the assessment
of exposure to chemical and biological agents) European Standard EN 482
(Workplace atmospheres - General requirements for the performance of procedures
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
: Regular monitoring of all work areas should be carried out at all times, including
areas that may not be equally ventilated.
DNELs/DMELs

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 5/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 8: Exposure controls/personal protection

Product/ingredient name Type Exposure Value Population Effects
2-Butoxyethanol DNEL Short term Dermal 89 mg/kg Workers Systemic
bw/day
DNEL Short term 135 ppm Workers Systemic
Inhalation
DNEL Short term 50 ppm Workers Local
Inhalation
DNEL Long term Dermal 75 mg/kg Workers Systemic
bw/day
DNEL Long term 20 ppm Workers Systemic
Inhalation
DNEL Short term Dermal 44.5 mg/ Consumers Systemic
kg bw/day
DNEL Short term 426 mg/m³ Consumers Systemic
Inhalation
DNEL Short term Oral 13.4 mg/ Consumers Systemic
kg bw/day
DNEL Short term 123 mg/m³ Consumers Local
Inhalation
DNEL Long term Dermal 38 mg/kg Consumers Systemic
bw/day
DNEL Long term 49 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Oral 3.2 mg/kg Consumers Systemic
bw/day
PNECs
Product/ingredient name Compartment Detail Value Method Detail
2-Butoxyethanol Fresh water 8.8 mg/l -
Marine water 0.88 mg/l -
Sewage Treatment 463 mg/l -
Plant
Fresh water sediment 34.6 mg/kg dwt -
Marine water sediment 3.46 mg/kg dwt -
Soil 2.8 mg/kg dwt -

8.2 Exposure controls

Appropriate engineering : Provide adequate ventilation. Where reasonably practicable, this should be
controls achieved by the use of local exhaust ventilation and good general extraction. If
these are not sufficient to maintain concentrations of particulates and solvent
vapours below the OEL, suitable respiratory protection must be worn.
: Users are advised to consider national Occupational Exposure Limits or other
equivalent values.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Eye/face protection : Use safety eyewear designed to protect against splash of liquids.
Skin protection
Hand protection : Wear suitable gloves tested to EN374.
Gloves : Short Term Exposure less than 10 minutes Continuous use Nitrile gloves.
Long Term Exposure Spill / For prolonged or repeated handling, use PE / PE
Laminate gloves > 8 hours (breakthrough time) .

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 6/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 8: Exposure controls/personal protection

There is no one glove material or combination of materials that will give unlimited
resistance to any individual or combination of chemicals.
The breakthrough time must be greater than the end use time of the product.
The instructions and information provided by the glove manufacturer on use,
storage, maintenance and replacement must be followed.
Gloves should be replaced regularly and if there is any sign of damage to the glove
material.
Always ensure that gloves are free from defects and that they are stored and used
correctly.
The performance or effectiveness of the glove may be reduced by physical/chemical
damage and poor maintenance.
Barrier creams may help to protect the exposed areas of the skin but should not be
applied once exposure has occurred.
The user must check that the final choice of type of glove selected for handling this
product is the most appropriate and takes into account the particular conditions of
use, as included in the user's risk assessment.
Body protection : Personnel should wear protective clothing.
: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : Use a properly fitted, particulate filter respirator complying with an approved
standard if a risk assessment indicates this is necessary. Recommended: A2P2
(EN14387). Respirator selection must be based on known or anticipated exposure
levels, the hazards of the product and the safe working limits of the selected
respirator.
Environmental exposure : Do not allow to enter drains or watercourses.
controls
Before use of this material please refer to the Exposure Scenario(s) if attached for the specific end use,
control measures and additional PPE considerations. The information contained in this safety data sheet
does not constitute the user’s own assessment of workplace risks, as required by other health and safety
legislation. The provisions of the national health and safety at work regulations apply to the use of this
product at work.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state : Liquid.
Colour : Not available.
Odour : Paint
Odour threshold : Not Available (Not Tested).
pH : 7.3
Melting point/freezing point : Not Available (Not Tested).
Initial boiling point and : 100°C
boiling range
Flash point : Closed cup: >93.3°C
Evaporation rate : 0.09 (butyl acetate = 1)
Flammability (solid, gas) : Not Available (Not Tested).
Burning time : Not Available (Not Tested).
Burning rate : Not Available (Not Tested).
Upper/lower flammability or : Lower: 0.9%
explosive limits Upper: 10.6%
Vapour pressure : 0.31 kPa [at 20°C]

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 7/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 9: Physical and chemical properties

Vapour density : 1 [Air = 1]
Relative density : 1.14
Solubility(ies) : Not Available (Not Tested).
Solubility in water : Not Available (Not Tested).
Partition coefficient: n-octanol/ : Not Available (Not Tested).
water
Auto-ignition temperature : Not Available (Not Tested).
Decomposition temperature : Not Available (Not Tested).
Viscosity : Kinematic (room temperature): >0.205 cm2/s
Kinematic (40°C): >0.205 cm2/s
Explosive properties
Oxidising properties : Under normal conditions of storage and use, hazardous reactions will not occur.

9.2 Other information

Heat of combustion : 2.426 kJ/g

SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.

10.2 Chemical stability : Stable under recommended storage and handling conditions (see Section 7).

10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions

10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.

10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.

10.6 Hazardous : Under normal conditions of storage and use, hazardous decomposition products
decomposition products should not be produced.
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL
PROTECTION for additional handling information and protection of employees.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
There are no data available on the mixture itself. Procedure used to derive the classification according to Regulation
(EC) No. 1272/2008 [CLP/GHS]. See Sections 2 and 3 for details.

Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular
weakness, drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with
the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
Acute toxicity

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 8/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 11: Toxicological information

Product/ingredient name Result Species Dose Exposure
2-Butoxyethanol LCLo Inhalation Vapour Guinea pig >3.1 mg/l 1 hours
LD50 Dermal Guinea pig >2000 mg/kg -
LD50 Oral Rat 1300 mg/kg -
2-(2-Butoxyethoxy)-ethanol LD50 Dermal Rabbit 2700 mg/kg -
LD50 Oral Rat 4500 mg/kg -
Acute toxicity estimates
Route ATE value
Oral 46099.3 mg/kg
Dermal 39007.1 mg/kg
Inhalation (vapours) 390.1 mg/l
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
2-Butoxyethanol Eyes - Moderate irritant Rabbit - 24 hours 100 -
milligrams
Eyes - Severe irritant Rabbit - 100 -
milligrams
Skin - Mild irritant Rabbit - 500 -
milligrams
2-(2-Butoxyethoxy)-ethanol Eyes - Moderate irritant Rabbit - 24 hours 20 -
milligrams
Eyes - Severe irritant Rabbit - 20 milligrams -
Conclusion/Summary : Not available.
Sensitisation
No data available

Conclusion/Summary : Not available.

Mutagenicity
No data available
Carcinogenicity
No data available

Reproductive toxicity
No data available
Teratogenicity
No data available
Specific target organ toxicity (single exposure)
Product/ingredient name Category Route of Target organs
exposure
No data available
Specific target organ toxicity (repeated exposure)
Product/ingredient name Category Route of Target organs
exposure
No data available
Aspiration hazard
Product/ingredient name Result
No data available

Other information : Not available.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 9/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 12: Ecological information

12.1 Toxicity
There are no data available on the mixture itself.
Do not allow to enter drains or watercourses.

Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Product/ingredient name Result Species Exposure
2-Butoxyethanol Acute EC50 >1000 mg/l Fresh water Daphnia - Daphnia magna 48 hours
Acute LC50 800000 μg/l Marine water Crustaceans - Crangon crangon 48 hours
Acute LC50 1250000 μg/l Marine water Fish - Menidia beryllina 96 hours
2-(2-Butoxyethoxy)-ethanol Acute LC50 1300000 μg/l Fresh water Fish - Lepomis macrochirus 96 hours

12.2 Persistence and degradability

Product/ingredient name Test Result Dose Inoculum
No data available
Conclusion/Summary : Not available.
Product/ingredient name Aquatic half-life Photolysis Biodegradability
2-Butoxyethanol - - Readily
2-(2-Butoxyethoxy)-ethanol - - Readily

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
No data available

12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.

12.5 Results of PBT and vPvB assessment

PBT : Not applicable.
vPvB : Not applicable.

12.6 Other adverse effects : No known significant effects or critical hazards.

: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction.
Hazardous waste : No.
European waste : 08 01 12 waste paint and varnish other than those mentioned in 08 01 11
catalogue (EWC)

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 10/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 13: Disposal considerations

Disposal considerations : Do not allow to enter drains or watercourses.
Dispose of according to all federal, state and local applicable regulations.
If this product is mixed with other wastes, the original waste product code may no
longer apply and the appropriate code should be assigned.
For further information, contact your local waste authority.
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Disposal considerations : Using information provided in this safety data sheet, advice should be obtained from
the relevant waste authority on the classification of empty containers. Empty
containers must be scrapped or reconditioned. Dispose of containers contaminated
by the product in accordance with local or national legal provisions.
European waste : Plastic articles 15 01 02 - metallic packaging 15 01 04 - mixed packaging 15 01
catalogue (EWC) 06.
Special precautions : This material and its container must be disposed of in a safe way. Empty containers
or liners may retain some product residues. Avoid dispersal of spilt material and
runoff and contact with soil, waterways, drains and sewers.
SECTION 14: Transport information
ADR/RID IMDG IATA
14.1 UN number Not regulated. Not regulated. Not regulated.

14.2 UN proper - - -
shipping name
14.3 Transport - - -
Hazard Class(es)/
Label(s)

14.4 Packing - - -
group
14.5 No. No. No.
Environmental
hazards
Additional Special provisions - -
information Not Applicable
This mixture is not classified as dangerous according to international transport regulations (ADR/RID, IMDG,
ICAO/IATA).

14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

14.7 Transport in bulk : Not applicable.

according to Annex II of
Marpol and the IBC Code
Multi-modal shipping descriptions are provided for informational purposes and do not consider container
sizes. The presence of a shipping description for a particular mode of transport (sea, air, etc.), does not
indicate that the product is packaged suitably for that mode of transport. All packaging must be reviewed for
suitability prior to shipment, and compliance with the applicable regulations is the sole responsibility of the
person offering the product for transport. People loading and unloading dangerous goods must be trained on
all of the risks deriving from the substances and on all actions in case of emergency situations.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 11/13
 Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market
and use of certain
dangerous substances,
mixtures and articles
Other EU regulations
VOC content (2010/75/EU) : 3.2 w/w
37 g/l

Priority List Chemicals : Not determined

(793/93/EEC)
Seveso Directive
This product may add to the calculation for determining whether a site is within the scope of the Seveso Directive on
major accident hazards.
National regulations

15.2 Chemical safety : No Chemical Safety Assessment has been carried out.
assessment

SECTION 16: Other information

Indicates information that has changed from previously issued version.
Abbreviations and : ATE = Acute Toxicity Estimate
acronyms CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
1272/2008]
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PBT = Persistent, Bioaccumulative and Toxic
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
vPvB = Very Persistent and Very Bioaccumulative
Key literature references : Regulation (EC) No. 1272/2008 [CLP]
and sources for data ADR = The European Agreement concerning the International Carriage of
Dangerous Goods by Road
DPD = Dangerous Preparations Directive [1999/45/EC]
DSD = Dangerous Substances Directive [67/548/EEC]
IATA = International Air Transport Association
IMDG = International Maritime Dangerous Goods
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by
Commission Regulation (EU) 2015/830
Directive 96/82/EC, and relative amendments & additions
Directive 2008/98/EC, and relative amendments & additions
Directive 2000/39/EC, and relative amendments & additions
CEPE Guidelines

Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 12/13
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II
HYDRO WATERBORNE TOPCOAT FOR INTERIORS PIGMENTED - WHITE, 50 GLOSS
AT4850/13

SECTION 16: Other information

Classification Justification
Not classified.

Date of printing : 10, Sep, 2016.

Date of issue/ Date of : 10, Sep, 2016.

revision
Date of previous issue : 29, May, 2016.

: If there is no previous validation date please contact your supplier for more
information.
Version : 5

Notice to reader
It is recommended that each customer or recipient of this Safety Data Sheet (SDS) study it carefully and
consult resources, as necessary or appropriate, to become aware of and understand the data contained in this
SDS and any hazards associated with the product. This information is provided in good faith and believed to
be accurate as of the effective date herein. However, no warranty, express or implied, is given. The information
presented here applies only to the product as shipped. The addition of any material can change the
composition, hazards and risks of the product. Regulatory requirements are subject to change and may differ
between various locations and jurisdictions. The customer/buyer/user is responsible to ensure that his
activities comply with all country, federal, state, provincial or local laws. The conditions for use of the product
are not under the control of the manufacturer; the customer/buyer/user is responsible to determine the
conditions necessary for the safe use of this product. The customer/buyer/user should not use the product for
any purpose other than the purpose shown in the applicable section of this SDS without first referring to the
supplier and obtaining written handling instructions. Due to the proliferation of sources for information such
as manufacturer-specific SDS, the manufacturer cannot be responsible for SDSs obtained from any other
source.

Date of issue/Date of revision : 10, Sep, 2016. Date of previous issue : 29, May, 2016. Version :5 13/13