Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    BMW Electrical Milan 2

    Uploaded by

    miktgg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BMW Electrical Milan 2

    Uploaded by

    miktgg
    12 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    BMW Electrical Milan 2

    Uploaded by

    miktgg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    B61 08 11 Attachment July 2011

    PROCEDURE

    1. Replace the cable and fuse box if any discoloration is evident, as shown in the picture below.

    2. Please remove the old


    cable from the harness.
    3. Route the replacement
    cable in the same
    position as the existing
    one. The front passenger
    door opening area is
    shown with the
    passenger seat removed
    and the carpet moved
    aside.
    Note: The carpet does
    not need to be fully
    removed.
    4. Ensure that the new
    cable is not touching or
    near any sharp edges,
    and secure in the
    harness as needed.
    2

    5. The harness routes


    through the passenger
    rear seat area into the
    trunk, as shown in the
    picture. Ensure that the
    harness is properly
    routed through the
    grommet.

    6. Route the harness into


    the trunk and connect to
    the Power distribution
    box mounted on the
    battery (an E90 vehicle is
    shown as an example).
    7. Torque the battery cable
    retaining nut to 15 Nm.

    You might also like