Face recognition machine

Handbook

1
 Catalog
Chapter 1 A basic introduction to machines..................4
I Product appearance description................................................. 4
Ⅱ Main parameter...............................................................................7
Ⅲ Menu introduction.........................................................................8
Chapter 2 Instructions of the machine..........................9
Ⅰ Register......................................................................................... 9
1.1 Register....................................................................................................... 10
1.1.1 Facial registration............................................................................... 10
1.1.2 Fingerprint registration...................................................................... 10
1.1.3 Password registration........................................................................ 10
1.1.4 Induction card registration................................................................ 10
1.2 View User.................................................................................................... 10
1.3 Delete User................................................................................................. 10
1.4 Query entry and exit record..................................................................... 10
Ⅱ Set communication..................................................................... 11
2.1 Machine ID.................................................................................................. 11
2.2 Baud Rate................................................................................................... 11
III Set time........................................................................................... 11
Ⅳ Device............................................................................................. 11
4.1 General setting........................................................................................... 11
4.1.1 Language............................................................................................. 11
4.1.2 Date Format.........................................................................................11
4.1.3 Volume................................................................................................. 12
4.1.4 Auto OFF..............................................................................................12
4.1.5 Screen Saver...................................................................................... 12
4.1.6 Wiegand...............................................................................................12
4.2 Logs............................................................................................................. 12
4.2.1 Arec WRN (Administrator record warning).....................................12
4.2.2 URec WRN (User Record Warning)............................................... 12
4.2.3 Re-verify...............................................................................................13
4.3 Advanced.....................................................................................................13
4.3.1 Delete ALL REC..................................................................................13

2
 4.3.2 Delete ALL REG................................................................................. 13
4.3.3 Delete ALL data.................................................................................. 13
4.3.4 Default Setting.................................................................................... 13
Ⅴ USB disk.........................................................................................13
5.1 All Rec. (Download all attendance data ).............................................. 13
5.2 Enr. Data (Download enrolled user data).............................................. 13
5.3 Load Data (Upload user data)................................................................. 14
Ⅵ System Info................................................................................... 14
Chapter 3 Enclosure........................................................................ 15
Illustration of Correct Fingerprint Pressing.............................................. 15
Wrong Pressing Method..............................................................................15
Wiring diagram of entrance guard........................................... 16

3
 Chapter 1 A basic introduction to
machines
I Product appearance description

4
5
6
Ⅱ Main parameter

Seq. Item Index

Working power
1 DC: voltage 12V + 10% current < 350mA
supply

2 Outer size 160(L) x92(W) x 30(D) mm

3 Weight 0.28kg
working
4 -20℃—50℃
temperature

5 Humidity 10%—85%

Storage 100000 records, 500 faces, 1500 fingerprints and

6
capacity 500 passwords.
Speed of
7 ≤0.5S
recognition
8 FRR <0.01%
9 FAR <0.001%
U-disk
Communication
10 Via U-disk it can send fingerprint data to other
mode
devices

11 Wiegand signal Wiegand output, can be used as a reader

Keyboard and
12 2.8 inch color screen and touch button
display

7
Ⅲ Menu introduction

1、Register 4、Device

Menu 2、Set comm 5、U-disk

3、Set time 6、Sys Info

1、Register

1.Register 2.View User 3.Delete User 4．View Log

1.Machine ID
2、Set comm
2.Baud rate

4、Device
4、Auto OFF
1、Language
1GeneralSetting
2、DateFormat 5、Scerrn Saver

3、Volume 6、Wiegan

1、Arec WRN

2、Logs 2、URec WRN 1Delete ALL REC

3、Reverify 2Delete ALL REG

8
3、Advanced 3Delete ALL data

4Default Setting
 5、Udisk

1、All Rec 2、Enr.Data 3、LoadData

6、Sys Info

1、Reg.Data 2.Free Space Info 3.All Space Info

Chapter 2 Instructions of the machine

Under attendance status, press the "MENU" key
(1) Once the manager has not been registered, directly into the menu;
(2) The registered manager can enter the menu after successful
verification.

ⅠRegister
There are four registering modes in this attendance machine: face,
fingerprint, password and card. Each user can register 10 fingerprints, 1
passwords, 1 face and 1 card(optional).
The manager registration is to authorize the manager to manage the
operation. The registration method is the same as ordinary user registration,
but the user privilege is selected as the senior administrator.
Note: The function of the induction card is non standard function,
depending on its specific type.
9
 1.1 Register
1.1.1 Facial registration
Register → Register → Input work ID, name →Choose the face
→ OK → Enter 8 times → Success of registration
When you register your face, you need to place your face straight, and the
machine will automatically recognize the current face. After 8 successful
entries of different angle, the face will be saved to the device.
1.1.2 Fingerprint registration
Register → Register → Input work ID, name → Registration of fingerprints →
OK → Enter 3 times → Success of registration

1.1.3 Password registration

Register → Register → Input work ID, name → Select the password
→ OK → Input password → OK → Enter the password again → OK
The password length is 1-8 digits, and a user registers only one password.
1.1.4 Induction card registration
Register → Register → Input work ID, name → Selection of card → OK →
Please Swipe your card → OK

1.2 View User

Register → View User → Choice of work ID → OK → Select the options that
need to be edited → OK .
View User can edit the data of registered users, backup fingerprints and
modify user permissions.

1.3 Delete User

Register → Delete → Input work ID → OK → Select Delete→ OK

1.4 Query entry and exit record

Register → View Log → Input work ID → OK
Note: We can only inquire about the entry and exit records of current month.
10
Ⅱ Set communication
2.1 Machine ID
Set comm. → Machine ID → Input work ID（1-255） → OK

2.2 Baud Rate

Set comm. → Baud rate → Select the speed of communication→ OK
The communication speed is optional 9600 or 19200 or 38400 or 57600 or
115200. The baud rate menu is used to set the speed of the communication
between the attendance and the computer. The set must be consistent with
the communication port of the PC manager, otherwise it can not
communicate.
address, server port number, refer to the IP address, use the choice key
to enter, according to the network actual environment to input.

III Set time

Move the cursor to the time setting with the key up or down or enter the
numeric key, enter the time needed to be set, and save it by OK. And Week is
auto-calculated and no need to input.

Ⅳ Device
4.1 General setting
4.1.1 Language
Device → General setting → Language → Choose the language required →
OK
Note: there are ten types of languages: Simplified Chinese, traditional
Chinese, English and so on.

4.1.2 Date Format

Device → General setting → Date Format → Select the required format→
11
OK

4.1.3 Volume
Device → General setting →Volume →Setting up the volume of the volume
(1-8 optional) → OK

4.1.4 Auto OFF

Device → General setting→ Auto OFF → Set time shutdown time → OK
Note: 0 represents "no", "no" is switched off for timer shutdown, the time
interval is 0-255, the unit is minute.
4.1.5 Screen Saver
Device → General setting → Screen Saver→ Setting screen protection
time→ OK

Note: the range of time is 1-255, and the unit is minute.

4.1.6 Wiegand
Device → General setting → Wiegand → Set up Wiegand 26 or Wiegand 34
→ OK

4.2 Logs
4.2.1 Arec WRN (Administrator record warning)

It is used to prompt when a administrator record reaches the limit of

the attendance machine's storage limit. All the actions that are done
by the administrator will be recorded as the administrator records.

Device → Logs → Arec WRN → Set number (range 0-255) → OK

4.2.2 URec WRN (User Record Warning)

It is used to set up the number of attendance records before it reaches the
limit of the memory capacity of the attendance machine. When it’s prompted,
please use the software to collect the management records as soon as
possible, and delete the data on the attendance machine to ensure that the

12
new data can be stored.
Device → Logs → URec WRN → Set number (range 0-1500) → OK

4.2.3 Re-verify
For setting two intervals of fingerprint confirmation, the unit is minute. After
setting, the attendance data in the interval will not be recorded, and the sign
has been signed at the same time. The default value of the factory is not.
Device → Logs → Re-verify → Set number (range 0-255) → OK

4.3 Advanced
4.3.1 Delete ALL REC
Device → Advanced → Delete ALL REC → OK
4.3.2 Delete ALL REG
Device → Advanced → Delete ALL REG → OK
4.3.3 Delete ALL data
Device → Advanced → Delete ALL data→ OK
4.3.4 Default Setting
Device → Advanced → Default Setting → OK
This operation will restore all the parameters in the machine settings to the
factory settings.

Ⅴ USB disk
5.1 All Rec. (Download all attendance data )
U disk → All Rec. → Insert the U disk → OK → Prompt download
success

5.2 Enr. Data (Download enrolled user data)

U disk → Enr. Data→ Insert the U disk → OK → Prompt download success

13
 5.3 Load Data (Upload user data)
U disk → Load Data → Insert the U disk → OK → Prompt download success

Ⅵ System Info.
Move the cursor to the machine information item with up and down keys.
There are three sub menus.
1、Reg. Data：It is used to display all kinds of registration information of
current users, including the number of registered users, the number of
registered administrators, the number of facial registration, the number of
fingerprint registration, the number of password registration, the number of
card registration, and the specific information of attendance records.
2 Free Space Info ： It is used to display the remaining capacity in the
attendance machine, including the number of faces, the number of
fingerprints, the number of cards, the number of passwords, and the number
of attendance records
3 All Space Info：Display the total capacity of the attendance machine.
4 Product ： It is used to show the manufacturer, the name of the
equipment and the software version of the attendance machine, including the
7 contents of the manufacturer, the name of the equipment, the
manufacturing date, the serial number, the version of the fingerprint algorithm,
the firmware version and the firmware upgrade.

14
Chapter 3 Enclosure

Illustration of Correct Fingerprint Pressing

Flatly press fingerprint on

U fingerprint scanner
Try to press fingerprint
center to the middle or a
little upper of U scanner

Wrong Pressing Method

Vertical
Vertical Too
Toopartial
partial

Slant Too lower

15
Wiring diagram of entrance guard

16
Note : The figure is for normal power wiring diagram.

Note : The figure is for exclusive access power wiring

diagram. Access control power supply is always
recommended.
17