Non-Contacting Two-Channel Speed Sensor Type FA11 With Brass Screw-In Thread

Non-contacting two-channel speed sensor type
FA11 with brass screw-in thread
Scanning type Non-contacting

Frequency range FAH[..]: 0.2 ... 20,000 Hz
FAJ[..]: See diagram; 5 Hz...10,000 Hz de-
pending from module and scan distance;
under optimal conditions up to 15 kHz
Supply voltage 9 ... 32 VDC
Scanning object - FAH[..]: 0.2 ... 3 mm;
distance recommended: 1.0 ± 0.5 mm
FAJ[..]: See diagram in the technical
documentation
Protection class Housing: IP66/IP68
Connection Type A: IP65; Typ C, E, H, X: IP67
Material Sensor tube: Brass
Speed sensors FA11

Length L1 = 60 ... 200 mm
Mounting Male thread M14x1 | M16x1.5 | M18x1
M18x1.5 | 5/8" - 18 UNF (not available for all
types)
Measuring 1 or 2 measuring channels
channels
Output signal and 1 or 2 square wave signals or
signal type 2 square wave signals + 1 status signal or
2 square wave signals + 2 inverted square
wave signals
Output stage Push-pull amplifier
Option Additional status signal
Galvanically isolated output signals
Inverted output signals
Application range Measuring principles

Series FA[..]11 speed sensors are mainly used in the following Speed sensors of the FA[..]11 series operate according to differ-
areas: Shipbuilding industry and machinery and equipment. ent measuring principles, depending on the sensor type:
They usually measure the speed of ferromagnetic toothed Difference-hall-effect principle (type FAH11)
wheels. Furthermore, they can be used for detecting move-
ments of any ferromagnetic parts, e. g.: Two closely spaced Hall elements are located on the sensor
chip. The field of a magnet generates a constant voltage in the
• Toothed wheels with different tooth forms Hall elements. Ferromagnetic objects with an interrupted sur-
• Bolt heads face as they pass the Hall elements cause the Hall voltage to
change. When the moving object covers only one Hall element,
• Holes, openings or grooves
a differential voltage is generated to provide a measuring sig-
• Impulse bands for plain shafts (accessories) nal. The frequency of this measuring signal is proportional to
the speed of movement (rotational speed). The difference-Hall
principle is direction sensitive.
Specific features
Inductive-magnetic principle (type FAJ11)
• Robust housing: IP66/68
• Excellent vibration and shock resistance The measuring element consists of a sensing coil and an iron
core with an attached permanent magnet. Ferromagnetic ob-
• High degree of EMC immunity for difficult electrical envi- jects with an interrupted surface as they pass cause the con-
ronment stant field of the magnet to be changed and induce a voltage
• Variable lengths, threads and electrical connections in the sensing coil. The frequency of this signal is proportional
to the speed of movement (rotational speed). The induc-
• Detection of very low speed (near zero speed)
tive-magnetic principle is direction independent.
• Due to its design and its approvals especially suitable for
shipbuilding industry
Datasheet DB-FA11-EN | V01.03 | 29/05/2017 | Valid from product revision H11B,J11C,HZ11D,HD11A,HS11A,HQ11A | www.noris-group.com | sales@noris-group.com
| Overview speed sensors FA11 series NORIS Automation GmbH
Overview speed sensors FA11 series

Type Measuring principle Signal outputs Signal form
FAH11 Difference-hall One square wave signal
FAJ11 Induct.-magnetic One square wave signal
FAHZ11 Difference-hall Two square wave signals,

Q2 to Q1 is 90° phase shifted Q1
Q2
90° t
FAHS11 Difference-hall Two square wave signals,

Q1
Q2 to Q1 is 90° phase shifted,
one rotation direction signal Q2
90°
S
t
FAHD11 Difference-hall Two square wave signals, Q1
galvanically isolated,
Q2 to Q1 is 90° phase shifted
Q2
90° t
FAHQ11 Difference-hall Two + two inverted square wave Q1

signals, Q1 to Q2 and Q1_N to Q2_N Q1_N
are 90° phase shift
Q2
Q2_N
90° t
Approvals
FAH11 FAJ11 FAHZ11 FAHS11 FAHD11 FAHQ11
X X X X X X
X X X X X X
X X X X X X
X X X X X X
2 / 14 DB-FA11-EN
NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com
Errors and omissions excepted
NORIS Automation GmbH Dimensions, connections and drawings |
Dimensions, connections and drawings

Dimensions and mounting drawing
Explanation to the illustration

Please note the possible combination of L1 and L2 for the
nominal length in the type code.
L1: 60, 80, 100, 120 mm (up to 200 mm available on request)
L2: 5, 20, 40 mm
G1: M18x1; M18x1.5; 5/8“ – 18 UNF
L1
L2
G1
Direction-sensitive mounting of sensors with difference-hall principle (FAH[..] series)

B The left figure refers to the “tooth wheel” as scan object. Note
±15° that the mounting of sensors with difference-hall principle is
direction-sensitive.
A: Scan object distance see technical data
B: Marker of sensor (red)
Marker (B) points in direction of the tooth wheel rotation. The
permissible deviation is max. ±15°.
Distance and measurable frequency range for sensor with inductive-magnetic principle (FAJ[..] series)

The left figure refers to the tooth wheel as scan object. The de-
tection of the movement of very small tooth wheels (e. g.
m1.5) is possible by reducing the distance between sensor and
scanning object. The distance in relation to the lower meas-
ureable range is mentioned in the above illustration.
DB-FA11-EN 3 / 14
| Dimensions, connections and drawings NORIS Automation GmbH
Connectors and pin assignment

The following table shows an overview about the speed sensors and the available connector types.
Connection type FAH11 FAHZ11 FAHS11 FAHD11 FAJ11 FAHQ13

DIN 43650-A X - - - X -
MIL 14-5PN X - - - X -
EURO M12x1 X On request - - X -
DIN 72585 X - - - X -
Connecting plug -A DIN43650 A
PE Explanation to the left illustration

A: Length 30 mm
B: Length 18 mm
A
1 2 1: +UB
2: -UB (0V)
B 3: Signal Q
PE: Shield
3
Note:
Protection class: IP65
On delivery supplied with female
connector.
Connecting plug -C MIL 14-5PN
Explanation to the left illustration

1
6 A: Ø 29 mm
B: Length 26 mm
A
5 2 1: Shield
2: -UB (0V)
3: Signal Q
B 4 3 4: Signal Q
5: +UB
Protection class: IP67 6: Coding nib
Note:
On delivery without any female
connector (accessories set ZL4-1A)
Connecting plug -E Euro M12x1

2
5 6 A: Ø 18 mm
B: Length 16 mm
A
3 1 1: +UB
2: not used
3: -UB (0V)
B 4: Signal Q
4 5: Shield
Protection class: IP67 6: Coding nib
Note:
connector (accessories set ZL4-2A)
4 / 14 DB-FA11-EN
Connecting plug -H1 DIN72585 Bayonet

5 A: Ø 29 mm
4 1 B: Length 26 mm
A
1: +UB
2: -UB (0V)
3: Signal Q
B 2 3 4: Shield
5: Coding nib
Note:
connector
List with available female connectors
Connector Drawing No. Order No.

Female connector DIN 43650-A ZL-3A 311046
Female connector according VG95234 ZL4-1A-E 314015
Female connector Euro M12x1, shielded, straight with 2.0 m cable ZL4-2A 522101
Female connector Euro M12x1, shielded, angled 90°, with 2.0 m cable ZL4-2A 522439
Connection cables and pin assignment

The following table shows an overview about the speed sensors and the related connection cables.
Connection type -X FAH11 FAHZ11 FAHS11 FAHD11 FAJ11 FAHQ11

Cable with 3 wires X - - - X -
Cable with 4 wires - X - - - -
Cable with 6 wires - - X X - X
Connection cable type -X for sensors with 3 connecting wires

A A) 3 x 0.33 mm2
B) 80 ±10 mm
C) Length K1 ±5 %
B D) Diameter 4.6 ±0.5 mm
D
C
DB-FA11-EN 5 / 14

A
A) Wires 4 x 0.33 mm2 halogen-free
B) Length 80 ±10 mm
C) Length K1 ± 5% (K1 see customer drawing)
B D) Diameter 7 ±0.5 mm
D
C

A
A) Wires 6 x 0.33 mm2 halogen-free
B) Length 80 ±10 mm
C) Length K1 ±5% (K1 see customer drawing)
B D) Diameter 7 ±0.5 mm
D
C
Connection assignment for type FAH11, FAJ11
Connection assignment for type FAH, FAJ (one channel)
Color Explanation
Brown US +
Green US - (0V)
White Signal Q
Shield Ground
Connection assignment for type FA[..]Z
Colour Explanation
Brown US +
Green US - (0V)
White Signal Q1
Yellow Signal Q2
Shield Ground
6 / 14 DB-FA11-EN
Connection assignment for type FA[..]S
Colour Explanation
Brown US +
Green US - (0V)
White Signal Q1
Yellow Signal Q2
Grey Status output for direction of rotation detection
Pink NC
Shield Ground
Connection assignment for type FA[..]D
Colour Explanation
Brown Sensor 1: US1 +
Green Sensor 1: US1 - (0V)
White Sensor 1: Signal Q1
Pink Sensor 2: US2 +
Grey Sensor 2: US2 - (0V)
Yellow Sensor 2: Signal Q2
Shield Ground
Connection assignment for type FA[..]Q
Colour Explanation
Brown US +
White Q1
Grey Q1_N, inverted to Q1
Yellow Q2
Pink Q2_N inverted to Q2
Green US - (0V)
Shield Ground
DB-FA11-EN 7 / 14
Elementary circuit diagrams
Elementary circuit diagram FAH11, FAJ11, FAHZ11 Elementary circuit diagram FAHS11
UB+
UB+
Qn
Qn Ri
Ri
UB- (0V)
UB- (0V) Q1
D
Q2 S
CP
Elementary circuit diagram FAHD11 Elementary circuit diagram FAHQ11
UB+
+UB1
Qn
Q1 Ri
Ri
-UB1 (0V)
+UB2 Qn
Ri
Q2 UB- (0V)
Ri
-UB2 (0V)
8 / 14 DB-FA11-EN
NORIS Automation GmbH General technical data |
General technical data
Electrical connection
Supply voltage See specific technical data
Nominal voltage See specific technical data
Current consumption See specific technical data
Reverse voltage protection Yes
Over voltage protection Yes
Connection See specific technical data
Recommended cable length < 100 m
Used cable cross section 0.33 mm², shielded
Electrical output
Measuring channels See specific technical data
Output signal and signal type See specific technical data
Output stage Push-pull amplifier
Continuous short circuit Yes
protection
Galvanic isolation See specific technical data
Output level Low See specific technical data
Output level High See specific technical data
Output current NPN (Sink) See specific technical data
Output current PNP (Load) See specific technical data
Internal resistance Ri See specific technical data
Rise time ≥ 10 V/µs
Signal acquisition
Measuring principle Type FAH[..]: Difference-hall
Type FAJ[..]: Inductive magnetic
Frequency range See specific technical data
Scanning type Non-contacting
Scanning object - distance See specific technical data
Scanning object See specific technical data
Phase shift See specific technical data
DB-FA11-EN 9 / 14
| General technical data NORIS Automation GmbH
Environmental influences
Operating temperature -40 ... +120 °C
Storage temperature Recommended: -25 ... +70 °C; max.: -40 ... +105 °C (max. limit values within 30 days
per year @ relative humidity 5...95%)
Protection class See specific technical data
Vibration resistance DIN IEC 60068-T2-6, 10 g @ 5…2000 Hz (Sinus)
DIN EN 61373, 30 g @ 20…500 Hz (Random)
Shock resistance DIN IEC 60068-T2-27, 1000 m/s² @ 6 ms
Climatic test DIN IEC 60068-T2-1/-2/-30
EMI - ESD IEC 61000-4-2, Lev. 3
EMI - Burst IEC 61000-4-4, Lev. 3
EMI - Surge IEC 61000-4-5, Lev. 2
EMI - HF immunity IEC 61000-4-3, 10 V/m
IEC 61000-4-6 (RF - conducted), 10 Veff
IEC 60553 (AF - conducted), 3 Veff
Emitted interference CISPR 16-1, CISPR 16-2 EMC2
Insulation voltage 500 VAC, 50 Hz @ 1 min
Mechanical properties
Material Sensor tube: Brass
Connecting plug: depending on connecting plug type
Mounting Screw-in thread (see type code)
Length L1 = 60 ... 200 mm
Installation position Any
Installation mode See specific technical data
Weight 100 ... 300 g (depending on connection and length)
Pressure resistance 5 bar (measuring area)
10 / 14 DB-FA11-EN
NORIS Automation GmbH Specific technical data |
Specific technical data

Technical data on measuring principles
Difference-hall principle FAH type Inductive-magnetic principle FAJ type

Scanning object Ferromagnetic materials, Ferromagnetic materials,
Toothed wheel: Module m1 to m3; Toothed wheel: Module ≥ m1.5;
tooth face > 7 mm (spur gear DIN867) tooth face width ≥ 5 mm (spur gear DIN867)
Hole: Ø ≥ 5 mm, web ≥ 2 mm, depth ≥ 4 mm Hole: Ø ≥ 5 mm, web ≥ 2 mm, depth ≥ 4 mm
Groove: ≥ 4 mm, web ≥ 2 mm, depth ≥ 4 mm Groove: ≥ 4 mm, web ≥ 2 mm, depth ≥ 4 mm
Scanning object - dis- 0.2 ... 3 mm; recommended: 1.0 ± 0.5 mm See diagram in the technical documentation
tance
Frequency range 0.2 ... 20,000 Hz See diagram; 5 Hz...10,000 Hz depending from
module and scan distance; under optimal
conditions up to 15 kHz
Installation mode Direction sensitive Direction independent
Technical data on electrical connection and signal detection
Sensors with one signal output
FAH11 FAJ11
Nominal voltage 24 VDC
Current consumption < 10 mA (without output current PNP) < 6 mA (without output current PNP)
Connection DIN 43650A, Mil14-5PN, Euro M12x1, DIN 72585 or cable end (see customer drawing)
Measuring channels 1 measuring channel
Output level Low ≤ 0.8 V @ 24 VDC, 10 mA, 24 °C
Output level High ≥ UB-1.5 V @ 24 VDC, 10 mA, 24 °C
Internal resistance Ri 45 Ω
Output current NPN (Sink) max. -50 mA
Output current PNP (Load) max. 50 mA
Protection class Housing: IP66/IP68 Housing: IP66/IP68
Connection Type A: IP65; Typ C, E, H, X: IP67 Connection Type A: IP65; Typ C, E, H, X: IP67
Approvals CE, ABS, BV, DNV-GL, LR
Sensors with two signal outputs
FAHZ11 FAHD11
Supply voltage 9 ... 32 VDC 2 x 9 ... 32 VDC
Nominal voltage 15 VDC 2 x 15 VDC
Current consumption < 20 mA (without output current PNP) 2 x < 10 mA (without output current PNP)
Connection Cable end, customized connections acc. customer drawing
Measuring channels 2 measuring channels 2 galvanically isolated measuring channels
Output level Low Per output: ≤ 0.8 V @ 15 VDC, 10 mA, 24 °C
Output level High Per output: ≥ UB-1.6 V @ 15 VDC, 10 mA, 24 °C
Output current NPN (Sink) Per output: max. -50 mA
Output current PNP (Load) Per output: max. 50 mA
Phase shift 90° ± 10% @ m1.5...m3 | 90° ± 15% @ m1...m1.25
Connection Type X: IP67
DB-FA11-EN 11 / 14
| Specific technical data NORIS Automation GmbH
Sensors with two signal outputs and status signal output
FAHS11
Current consumption < 20 mA (without output current PNP)
Connection Cable end, see customer drawing
Measuring channels 2 measuring channels and status channel for rotation direction detection
Phase shift 90° ± 10% @ m1.5...m3 | 90° ± 15% @ m1...m1.25
Connection Type X: IP67
Sensors with four output signals
FAHQ11
Supply voltage 9...32 VDC
Current consumption < 20 mA (without output current PNP)
Connection Cable end, see customer drawing
Measuring channels 2 measuring channels
Phase shift 90° ± 10% @ m1.5...m3 | 90° ± 15% @ m1...m1.25
Protection class Housing:IP66/IP68
Connection: Typ X: IP67
12 / 14 DB-FA11-EN
NORIS Automation GmbH Type code |
Type code
Type code structure
FA H Z 11- 02 15- X03- M10- S0 Example: FAHZ11-0215-X03-M10-S0
Measuring principle
Measuring principle supplement
Construction type & material
Nominal length L1 and L2 of the sensor tube
Thread type
Electrical connection
Module version
Shield
Type code FAJ11[..]

Measuring principle J Inductive-magnetic J
Measuring principle Without code: 1 channel J
supplement
Construction type & 11- Sensor tube: brass J
material
Nominal length 02 L1 = 60 mm, L2 = 5 mm J
03 L1 = 80 mm, L2 = 5 mm J
04 L1 = 100 mm, L2 = 20 mm
05 L1 = 120 mm, L2 = 40 mm
Other lengths up to 200 mm available on request
Thread type 13- M14 x 1
22- M16 x 1.5
15- M18 x 1 J
23- M18 x 1.5 J
88- 5/8‘‘ – 18 UNF
Electrical A- DIN43650-A pin connector J
connection C- MIL 14-5PN VG95234 pin connector
E- Euro M12x1 pin connector J
H1- DIN72585 Bajonett
X03- Cable end with sheath length 0.5 m
X05- Cable end with sheath length 2.0 m J
Shield Without code: Shield attached to the sensor J
housing
S0 Shield not attached to the sensor housing
FA _ _ __ _ _- __ __- __- __ Example: FAJ11-0323-E-S0
Preferred types
Features marked with an indicator letter in the right column in the table are preferred features. If you select a preferred feature
for each placeholder (same indicator letter), the device is specified as a preferred type. Preferred types are available quickly from
stock. Other types will be delivered according to scheduled appointments.
Special types
If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you.
DB-FA11-EN 13 / 14
| Type code NORIS Automation GmbH
Type code FAH11[..]

Measuring principle H Difference-Hall X,Z
Measuring principle Without code: 1 output signal X
supplement Z 2 output signals, galvanically connected Z
S 2 output signals, galvanically connected and
status output (e. g. rotation direction detection)
D 2 output signals, galvanically isolated
Q 4 output signals (2 + 2 inverted)
Construction type & 11- Sensor tube: brass X,Z
material
Nominal length 02 L1 = 60 mm, L2 = 5 mm X
03 L1 = 80 mm, L2 = 5 mm X,Z
04 L1 = 100 mm, L2 = 20 mm
05 L1 = 120 mm, L2 = 40 mm Z
Other lengths up to 200 mm available on request
Thread type 13- M14 x 1 (only FAH11)
22- M16 x 1.5 (only FAH11)
15- M18 x 1 X
23- M18 x 1.5 X,Z
88- 5/8‘‘ – 18 UNF (only FAH11)
Electrical A- DIN43650-A pin connector (only FAH11) X
connection C- MIL 14-5PN VG95234 pin connector (only
FAH11)
E- Euro M12x1 pin connector (only FAH11, on re- X,Z
quest for FAHZ11)
H1- DIN72585 Bajonett (only FAH11)
X05- Cable end with sheath length 2.0 m X
Module M10- Module m1
(for FAHD, FAHZ, M12- Module m1.25
FAHQ Series)
M15- Module m1.5
Without code: Module m2 Z
M25- Module m2.5
M30- Module m3
Shield Without code: Shield attached X,Z
to the sensor housing
S0 Shield not attached to the sen-
sor housing
FA _ _ __ _ _- __ _ _- _ _- _ _- __ Example: FAHZ11-0323-X03-M12-S0
Preferred types
Features marked with an indicator letter in the right column in the table are preferred features. If you select a preferred feature
for each placeholder (same indicator letter), the device is specified as a preferred type. Preferred types are available quickly from
stock. Other types will be delivered according to scheduled appointments.
Special types
If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you.
14 / 14 DB-FA11-EN

Non-Contacting Two-Channel Speed Sensor Type FA11 With Brass Screw-In Thread

Uploaded by

Copyright:

Available Formats

Non-Contacting Two-Channel Speed Sensor Type FA11 With Brass Screw-In Thread

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Non-Contacting Two-Channel Speed Sensor Type FA11 With Brass Screw-In Thread

Uploaded by

Copyright:

Available Formats

Non-contacting two-channel speed sensor type

FA11 with brass screw-in thread

Scanning type Non-contacting

Speed sensors FA11

Application range Measuring principles

Overview speed sensors FA11 series

FAJ11 Induct.-magnetic One square wave signal

FAHZ11 Difference-hall Two square wave signals,

FAHS11 Difference-hall Two square wave signals,

FAHQ11 Difference-hall Two + two inverted square wave Q1

Dimensions, connections and drawings

Explanation to the illustration

Direction-sensitive mounting of sensors with difference-hall principle (FAH[..] series)

Explanation to the illustration

Explanation to the illustration

Connectors and pin assignment

Connection type FAH11 FAHZ11 FAHS11 FAHD11 FAJ11 FAHQ13

Connecting plug -A DIN43650 A

PE Explanation to the left illustration

Connecting plug -C MIL 14-5PN

Explanation to the left illustration

Connecting plug -E Euro M12x1

Explanation to the left illustration

Connecting plug -H1 DIN72585 Bayonet

Explanation to the left illustration

List with available female connectors

Connector Drawing No. Order No.

Connection cables and pin assignment

Connection type -X FAH11 FAHZ11 FAHS11 FAHD11 FAJ11 FAHQ11

Connection cable type -X for sensors with 3 connecting wires

Explanation to the left illustration

Connection cable type -X for sensors with 4 connecting wires

Explanation to the left illustration

Connection cable type -X for sensors with 6 connecting wires

Explanation to the left illustration

Connection assignment for type FAH11, FAJ11

Connection assignment for type FAH, FAJ (one channel)

Connection assignment for type FA[..]Z

Connection assignment for type FA[..]S

Connection assignment for type FA[..]D

Connection assignment for type FA[..]Q

Elementary circuit diagrams

General technical data

Specific technical data

Difference-hall principle FAH type Inductive-magnetic principle FAJ type

Technical data on electrical connection and signal detection

Sensors with one signal output

Sensors with two signal outputs

Sensors with two signal outputs and status signal output

Sensors with four output signals

Type code FAJ11[..]

Type code FAH11[..]

You might also like