Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    SFS FM 200 Fire Suppression System Actuator Cabinet 1L

    Uploaded by

    Tai

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SFS FM 200 Fire Suppression System Actuator Cabinet 1L

    Uploaded by

    Tai
    75 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    75 views2 pages

    SFS FM 200 Fire Suppression System Actuator Cabinet 1L

    Uploaded by

    Tai

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Fire Suppression System

    System Component Datasheet

    DT-STV-P1LE Rev 1.1


    Actuator cabinet 1L Effective: July 2019
    P/N STV-P1L

    FEATURES
     Completed set with pilot cylinder, solenoid,  For using with SFS FM-200 system and
    discharge pressure switch. SNS IG-100 system.
     Completed assembly in factory

    DESCRIPTION The released actuation gas is then used to activate the


    corresponding FM-200 needle cylinder valve, or selector
    The actuation cabinet STV-P1L is used to trigger the fire
    valves.
    suppression system. The actuation cabinet STV-P1L can
    be used to actuate the FM-200 needle cylinder valve, or The actuation cylinder is factory-fitted with a discharge
    selector valves. It is also used to trigger the agent valve that is opened via the activation of solenoid cutter.
    discharge alarm though the discharge pressure switch. As part of the cylinder safety feature, the actuation cylinder
    The actuation box assembly consists of a solenoid cutter, valve is fitted with rupture disc-fitted safety plug to prevent
    an CO2 pilot cylinder 1L 0.65kg, and a discharge pressure unsafe pressure built-up and damage of the device.
    switch. DISCHARGE PRESSURE SWITCH
    The actuation box assembly is enclosed in a steel box and The discharge pressure switch is used to activate the
    factory pre-assembled. discharge alarm system (supplied separately).
    SOLENOID CUTTER It is connected to the selection valve or discharge pipe via
    The solenoid cutter is used to actuate the actuation pressure switch actuation tube.
    cylinder. As the discharged extinguishing agent has reached the
    It is an integral component of the actuation box and is selection valve or pipe, pressure from the discharged
    activated via electric signal that is sent by the control panel extinguishing agent is used to activate the pressure switch.
    (supplied separately) upon fire detection. The pressure switch is then used to allow the flow of
    The solenoid cutter is fitted with PUSH button that is and electricity via electrical wires to activate the discharge
    should only be used for emergency manual activation alarm (system).
    should the electronics fail

    TECHNICAL INFORMATION
    Box
    ACTUATION CYLINDER Box material :Cold-reduced steel sheet
    The actuation cylinder is an integral part of the actuation Steel Thickness :1.2mm
    box that is filled with 0.65kg of CO2. Painting : Powder coating
    Dimensions : 355 (H) x 340(W) x 140 (D)

    Solenoid Cutter
    Voltage : 24Vdc
    Current : 1.5A

    Pilot cylinder
    Cylinder capacity : 1L
    Filled : 0.65 kg CO2
    Painting : Powder coating
    S-TECVINA Ltd.,
    Dong Van IV IZ, Ha Nam, Vietnam
    Phone: (+84) 0226 2460 114
    © 2019 S-TECVINA Ltd.,    www.stecvina.com 
    DT-STV-P1LE Rev 1.1

    Discharge pressure switch


    Pressure Connection : Ø6.3mm Copper tube
    Minimum Operating : 5 bar
    Max. Working Pressure : 100bar
    DC Switch Rating : 250V - 3A
    :16A (1/2HP 125/ 250 VAC)
    : 0.6A – 125 VDC
    : 0.3A – 250 VDC
    Installation Environment : Indoor

    ORDERING INFORMATION
    The part number for ordering the Actuator cabinet 1L with
    acessories as below table:

    Part number Description  


    Actuator cabinet 1L (included pilot
    STV-P1L cylinder, solenoid valve, discharge
    pressure switch)
    Cabinet

    Pilot cylinder, 1L, 0.65kg CO2 -


    Included
    Solenoid cutter

    Discharge pressure switch

    This literature is provided for informational purposes only. S-TECVINA Ltd.,. FM-200 is a registered trademark of The Chemours
    assumes no responsibility for the product’s suitability for a particular Company FC, LLC. 1007 Market Street Wilmington,
    application. The product must be properly applied to work correctly. If you need DE19899 United States of America (USA)
    more information on this product, or if you have a particular problem or
    S-TECVINA Ltd.,
    question, contact S-TECVINA Ltd.,.
    Dong Van IV IZ, Ha Nam, Vietnam
    Phone: (+84) 0226 2460 114
    © 2019 S-TECVINA Ltd.,    www.stecvina.com 

    You might also like